How to Fuel Tank Tuck a 99-04 Jeep Grand Cherokee WJ Part 1

This is a very detailed video on how to perform a fuel tank tuck on all Jeep Grand Cherokee WJ. I'll show you all the differences from the early 99-01 and the late models 02-04 and will cover different ways to perform this tuck.
This is also a great video on how to remove the bumper cover and how to lower the gas tank.
Related videos
How to Fuel Tank Tuck a 99-04 Jeep Grand Cherokee WJ Part 2 • How to Fuel Tank Tuck ...
How to Build a Circle Guide for a Plasma Cutter • How to Build a Circle ...
How to Build an Exhaust Hanger and Tail Pipe Dump Before Axle • How to Build an Exhaus...
Amazon Affiliate
Auto Trim Removal Tool Kit, Set of 12 Pcs amzn.to/2MZTQOY
Plasma Cutter Torch Circinus Roller Guide Wheel amzn.to/3fyKoy4
Millermatic 211 MIG Welder With Advanced Auto-Set And Cart amzn.to/33zA3jc
Plasma Cutter amzn.to/3ibdllA
Welding Gloves amzn.to/3j7fznb
Lincoln All American Welding Helmet amzn.to/2WmnKCE
DEWALT 20V MAX Impact Driver Kit, 1/4-Inch amzn.to/3dAVGl7
Dewalt 1/2 Drive 20 Volt Impact amzn.to/3f1lO9V
DEWALT 60V MAX 2 Battery FLEXVOLT Grinder Kit amzn.to/2Q1ECdW
Welding Clamps and Magnets amzn.to/3gUhWIf
Craftsman 3/8-Inch Drive Flex Head Quick Release Ratchet amzn.to/2Z0ojnq
Donate to Help Support Channel www.paypal.com/cgi-bin/webscr...
Facebook / martinbuilt-2351766611...
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission at no extra charge. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt cannot guarantee against improper use or unauthorized modifications of this information.
#martinbuilt #jeepgrandcherokee

[@717UT]

You are a tremendous resource for the WJ. Thank you Martin

[@martinbuilt]

Thank you Max I appreciate that.

[@marka.2715]

Finally! An awesome detailed video on how to do this. This is the next project for me on my WJ. Thanks! Looking forward to part 2.

[@martinbuilt]

Glad it was helpful!

[@ivanvujadinovic9905]

Awesome video! I love how clean of a job you do on your projects. Can't wait for part 2

[@martinbuilt]

Thank you, coming soon!

[@alessandromorenobardelli7401]

GREAT my friend. You are unique. ALWAYS a real pleasure to follow you. Hello from Italy.

[@martinbuilt]

Thank you very much!

[@sal.torres9070]

You're great craftsman. Thanks for doing an awesome detailed video of the gas tank tuck.

[@martinbuilt]

Thank you, glad you liked it.😊

[@nkbel9206]

Martin, your a great mechanic. Honestly, pretty sure your an engineer. Keep it up.

[@martinbuilt]

Wow, thanks

[@rjfiles1697]

You gave me all the confidence to tackle this modification. Awesome video man. Thank you. Looks amazing

[@martinbuilt]

Thank you, I appreciate that, you can do it!

[@reanash2096]

Your videos have been getting better and better everytime, love it

[@martinbuilt]

Happy to hear that!

[@dannyhuffman3587]

I was just looking for a good video on this last week! Looks like you did a solid job

[@martinbuilt]

Thank you Danny, glad you liked it.

[@LtGIR]

Thanks for these videos, been planning on doing this to mine for awhile. Replaced the completely rotted out skid plate before winter because I'm sure it wouldn't last another. Will tuck the tank this summer. You are a brave man dealing with that weight yourself, I think I'll pay with some Buds for a second set of hands. Great video as always!

[@martinbuilt]

You're very welcome. I hope it goes well for you. I recommend measuring several times before any cutting. Just take your time. I'm glad you found it helpful 👍

[@tonyduncil3115]

I always look forward to your videos you do very good explaining everything thing you do in the steps cant wait for part two

[@martinbuilt]

Glad you like them!

[@02jeepwj]

Absolutely love watching your videos and have learned a lot about the wj and it has truly helped me working on mine and ideas for modifications to do thank you so much for the amazing content man

[@martinbuilt]

Thank you I really appreciate that I'm glad you find the content helpful and informative.🙂👍

[@stoichiometry147]

Brilliant as always. This is added to my "To-Do" list.

[@martinbuilt]

Fantastic!

[@victorG83]

Great Martin! Nice big project! You're doing a nice job too! Congrats from Spain and I've been learning a lot with your videos! Thanks!

[@martinbuilt]

Thank you very much!

[@gkprogaming]

i have a secondary tank in my spare wheel well, but am considering removing it and doing a tuck and getting a after market tank to take up that extra head room, thanks Martin this vid is very helpful to me and has made me almost certain i want a tuck.

[@martinbuilt]

Sounds great!

[@mako757]

Awesome Martin!!! love the new project, rock on!

[@martinbuilt]

Thanks so much!

[@madisonave.7817]

Sir Martin. He is a master of WJ.

[@martinbuilt]

Thank you, Roberto I appreciate that.

[@mikebennett6001]

Yeah dude! I ain’t finished watching it! But that’s the next project on my WJ after I get done getting my front Dana 30 back in! And the 242 transfer case in replacing the np 247. Appreciate your videos! Now back to learning what you are teaching! Thanks Martin!

[@martinbuilt]

That's on my list as well, been looking for a 242HD.

[@michaelmcneal436]

Great video....getting ready to install a new skid plate on a 04, and this has been extremely helpful

[@martinbuilt]

Thank you, I'm glad you liked it and found it helpful.

[@davestewart9146]

Really looking forward to your next video Martin 👍😁

[@martinbuilt]

Coming soon!

[@beingre_bornbrb]

This is really useful stuff right hear, your whole channel

[@martinbuilt]

Thank you, glad you like them.

[@marcoantoniogarciabautista]

Incredible job Mártin...you're the best....!!!! Thanks....!!!!!!!!

[@martinbuilt]

Thank you Marco

[@davidmcmillan343]

this is awesome knowledge,Martin! Very well done!

[@martinbuilt]

Thank you I'm glad you liked it and found it helpful. 😁

[@larryfrye2324]

Yes , I sure did enjoy the part 1 . of the fuel tank tuck .

[@martinbuilt]

I glad you like it!

[@joewayne9951]

Excellent video,modification , and quality of work...

[@martinbuilt]

Thank you so much 😀

[@pablomarquez4431]

Absolute amazing work Martin! Wish I knew how to weld and had a garage so i could attempt this. I envy you lol. This is how they should of came from factory. Good job!

[@martinbuilt]

Thanks 👍

[@RadzVlog1981]

You do a great job martin. . Salute!

[@martinbuilt]

Thank you. I appreciate that. And thank you for watching. 🙂

[@josephdemarco2643]

This is awesome! Thanks for sharing this video!

[@martinbuilt]

My pleasure, glad you enjoyed it.

[@Formerlywarmer]

Excellent work buddy. Thx.

[@martinbuilt]

Thank you. I'm glad you liked it. 👍

[@victormendoza6306]

Good video, I m planning to remove the fuel tank, thank you very much for the way to do it

[@martinbuilt]

Thank you. I'm glad you liked it and found it helpful. Thank you for watching.

[@estalt957]

Nice work sir and did a great job for fuel tank going up

[@martinbuilt]

Thank you I appreciate that I'm glad you liked it.

[@Dixler683]

You are a smart guy, good job. Well thought out.

[@martinbuilt]

Thank you appreciate that. It is one of my favorite modes I've done so far.

[@richardphilhower6103]

Very cool man… good job!

[@martinbuilt]

Thank you 😀

[@duneattack]

Great Video Matin! Paul from Reno.

[@martinbuilt]

Glad you enjoyed it

[@AerialLensVideo]

Love that circle cutter!

[@martinbuilt]

Thank you for watching 👀

[@carlos6793]

Awesome video great work !

[@martinbuilt]

Thank you very much!

[@marcballan8285]

Thank you so much . Tank tuck done 🖐️.

[@martinbuilt]

You are very welcome. 🙂

[@mikehitschmann8655]

Thanks for the great videos, original ideas and meticulous workmanship Martin! Greetings from a WJ owner in Zimbabwe!

[@martinbuilt]

You are very welcome, glad you like them!

[@mikehitschmann8655]

@@martinbuilt can I ask, did you do a video on mounting your spare wheel externally after this fuel tank tuck? I'd like to do the same to my Jeep but, so far, haven't liked the options I've seen on KZbin for mounting my spare externally.

[@martinbuilt]

@@mikehitschmann8655 lol...sorry Mike my JGC is a street driven and more sporty looking like an SRT there is no way I'm mounting the tire on the outside. If it was a rock crawler I would.

[@mikehitschmann8655]

@@martinbuilt Well, I'm not so keen on having my spare outside anyway - any ideas on accommodating it on the inside after you did the fuel tank tuck?

[@moral64]

Awesome!!!!!!from Cleveland, Ohio

[@martinbuilt]

Thank you, I appreciate that.

[@MikeBrownOhio]

That is pretty slick... Love the channel... Stay safe... Have a great day...

[@martinbuilt]

Thanks, you too!

[@s.b5412]

Good job Martin allways profesional work ..

[@martinbuilt]

Thanks 👍

[@tntbiriba]

Im going to to this to increase fuel capacity! Excellent video!

[@martinbuilt]

Would you build a custom fuel cell to increase fuel capacity?

[@dakotadriggers8838]

@@martinbuilt I could see someone cutting two stock tanks up and plastic welding them together to make a bigger one

[@mfbassfishing2952]

Dude... This WJ is clean looks really nice i have a few ideas for mine

[@martinbuilt]

Thank you, glad I could help.

[@tuna_6548]

Harrison Ford modifies his fuel tank. Great video, giving me all kinds of ideas.

[@martinbuilt]

😆 glad you enjoyed it 😊 and thanks for watching.

[@scottcameron35]

Tank tuck has been on my list for a while!!! Definitely can’t sit for part 2!

[@martinbuilt]

I should have it edited and posted by Friday

[@scottcameron35]

martinbuilt can’t wait!

[@gogi9473]

Good job buddy 👍👍👍

[@martinbuilt]

Thank you I really do appreciate that. And thank you for watching 👀

[@dillon3355]

Great video, thanks for taking the time! This just seemed like such a horrible job I've been putting it off, but now ima gonna dive right innext weekend. Something for future videos that would be nice would be if you could show these odd & random connectors after you get them off, how they are removed and replaced etc...etc... Thanks again!

[@martinbuilt]

Glad I could help! I had been wanted to do these for at least 2 years

[@tomyka2009]

Respect ! Very nice job !!!

[@martinbuilt]

Thank you. I'm glad you liked it 👍 😊

[@dzlfreek]

can't wait for part 2...im on pins and needles here!

[@martinbuilt]

Lol...yeah I bet, you're co-starring.

[@MOTOWNN]

Excellent video! im in the process of doing the same except my skid plate was toast so I got one of Affordable off-road skid plates for a 4" tuck (its built like a tank) ill be using your idea for fuel pump access and ill ribb my cover plate as well.

[@martinbuilt]

thank you for watching!

[@Hasithism]

Yesss been wanting this from you for years 😂

[@martinbuilt]

better late then never...lol should have part 2 out on Friday

[@Hasithism]

@@martinbuilt can't wait. Wanted to do this for some time but I was too scared I'd mess up. Tg for your videos

[@johnmorell2663]

Awesome work and thought process I love your work nice job .

[@martinbuilt]

Thank you, John. I really appreciate that.

[@johnmorell2663]

@@martinbuilt I might get around to doing that!! how much weight did you shed from vehicle all sad & done. 200 lbs

[@martinbuilt]

I kind of doubt I shed too much weight at all because once you add the 14 gauge plate that adds some weight back you could use the light duty skid plate over the heavy duty one that would shed quite a bit as much as 25 pounds. I have considered building a new skip plate with the light duty one to reduce weight. If I was using for off road use I would definitely use the heavy duty skip plate.

[@Sundance54]

Good job, much better than it was👍

[@martinbuilt]

Thanks 😅 Scott, I appreciate that.

[@rickbyard9987]

Nice and thorough good video I wish I hang all of that equipment thanks martin

[@martinbuilt]

Thank you I'm glad you liked it and found it helpful. ☺️

[@s.b5412]

This is the best looking model of grand cherokees

[@martinbuilt]

I couldn't agree more.😊👍

[@scottcameron35]

And by far the best tuck video on KZbin! Are you going through the unibody with the filler hose?!?!?

[@martinbuilt]

Thank you Scott, I appreciate that, yeah I'm going through the frame with the fill hose.

[@gartheligon140]

I'm anxious to see part 2, I hope we get to see the machine pressing ribs into the wheel well metal plate.

[@martinbuilt]

Yes you will get to see the bead roller in action.

[@juliochaconchacon9763]

Muy buena explicación. Lo felicito desde Venezuela.

[@martinbuilt]

Thank you I'm glad you liked it and found it helpful. Thanks for watching. 😊

[@versionvisual]

BUEN TRABAJO 👍 SALUDOS 🇲🇽

[@nominalvelocity]

That space under the floor cover would be a great place to stow some tools and stuff. Slick job.

[@martinbuilt]

Thank you, yes it works out great for things like that.

[@jumpoffit2052]

Great I have all the tools to do this. There goes my weekend

[@martinbuilt]

You the man if you can knock that out in a weekend...lol Of course it takes me 4 times longer cause I gotta move 2 or 3 cameras around to get the right angle, think about what I'm gonna say and then do.

[@jumpoffit2052]

also work in a sheet metal shop so I can make that cover in no time at all.

[@martinbuilt]

You'll probably have this knocked out no time

[@jaycarr1790]

Do I plan on doing this to my WJ? No. Did I watch the whole thing? Absolutely. Really cool mod.

[@martinbuilt]

Thank you i'm glad you like that. And thank you for watching the whole thing.😊

[@adnansalman4459]

Great jop sir👍👍 🙋‍♂️🙋‍♂️

[@martinbuilt]

Thank you! Cheers!

[@LZDEN]

Hi martin,once again first class work my friend.no doubt about it.its always good to see a genius at work...and bad language always makes me feel better...hahaha...all the best my friend.regards Den.

[@martinbuilt]

Glad you enjoyed it Den, yeah it makes me feel better for sure, I'm not sure how the neighbors feel about it...Lol

[@LZDEN]

@@martinbuilt as always Martin,i think we can certainly educate the neighbours with you words my friend.haha...all the best to you my friend..regards Den.

[@medicoremedic2962]

My tank skid was riddled with rust and had to be replaced and the replacement wasn't that great either in Northern MN. I'm quite jealous of how clean that one is!

[@martinbuilt]

Yeah I'm originally from Iowa and I know what you're talking about. Next time you're shopping for a Jeep make your way out to Las Vegas and they'll look just as clean as this one

[@adjake1]

Nice plate....Let’s Go Flyers.

[@jeeploggernz2289]

DAM wish I had you're garage set up, oh wait and you're skills, awesome bro

[@martinbuilt]

I appreciate that!

[@367cuba1]

Martin, I have watched about 5 of your videos. I have to say your work is over the top just overly impressive. I have a 2004 Jeep Grand Cherokee 4.0 straight 6 and I love doing work under the hood I do wish I had your years of knowledge. I do find the 4.0 6 cylinder one of the easier engines to work on. Well, I will definitely be subscribing to your channel. God Bless+

[@martinbuilt]

Thank you, I do appreciate that, yea the 4.0 is one of the best and most reliable engines ever made. Thank you for subscribing.

[@367cuba1]

@@martinbuilt I have a question maybe you can answer my accumulator does not have an ac low- pressure switch on it as some do. last year I replaced the blower under the glove compartment and ac blower Resistor and all was good and cold. Now I only have heat no cold ac. My freon reads full no leak. So could it be the ac low-pressure switch that's not on the accumulator and trying to figure out where it's at or can it be the ac expansion valve by the firewall? Any advice would be greatly appreciated. Thank's

[@martinbuilt]

@@367cuba1 is the A/C compressor turning on and if so are the blend doors working properly?

[@timleming2325]

Thank you for this video. I've been wanting to do this to my wj for a long time just didn't know how to start. Keep up the good work And love the street wj😍😍

[@martinbuilt]

Thank you Tim glad I could help

[@bigprowes]

wow nice!!!

[@martinbuilt]

Thank you! Cheers!

[@bruceallen6016]

I like your removing the bumper cover idea for access. My tank is leaking from a broken hose (I hope).I now have the kit you linked to along with push pins for reassembly coming. I'm hoping I don't have to pull the tank and can find the leak without doing so. Thanks! 😎

[@martinbuilt]

I'm glad to hear you find the content helpful. good luck on your finding that leak. I can't imagine that the tank itself is leaking I would think it would either be on the fill hose or vent hose or possibly the fuel pump assembly gasket on top of the tank.

[@bruceallen6016]

@@martinbuilt Whatever it is it's pressurized. When I first noticed it it was coming out fast. I had to haul but to get home before it ran out of fuel.

[@edgardmartinez2015]

Hello Martin thanks for the beautiful Video God blessed u so much for helping people's around the world question Martin where I can find a cowl hood like someone u had in ur jeep

[@martinbuilt]

Thank you, if you are referring to the hood scoop on the 04 JGC, I got that from MMD 71323-00 hood scoop that I purchased from www.americanmuscle.com for 109.99 free shipping. Thank you for watching.

[@abdullaalrajhi8091]

I did on my wj sub tank with 50liter and put a spare tire carrier and close the circle in the trank abaut 15 year ago

[@alhwaity2]

You done great job, I really like it. I want to ask about the hood vent where I could buy this.

[@martinbuilt]

Thank you, I used an MMD 71323-00 hood scoop that I purchased from www.americanmuscle.com for 109.99 free shipping.

[@johnp5616]

Martin, what is that EVAP unit you removed on the driver bumper side called?

[@allensnook7760]

Loved the tummy tank tuck job martin,i like urs better,than ones ive seen on other sites as well.yours was thought out more.plus that access plate idea was epic!!!!i almost spit up my cold snack when u injected humor of no going back now.while looking up thru floor.was thinking same thought,cool!!was curious those led lights on bumper how did u connect.i bought one of those bar type that fits on most trucks!!!think its just a bit to thick to fit in but like the third brake light setup you have.oh and im still wanting to know is there anyway we can make transmission dip stick more secure in tube.you didnt get back to me about that????snookie pa.2002wj owner 4.7ho

[@martinbuilt]

Thank you, Allen, Glad you enjoyed the video. The 3rd brake light is a LED stripe that can be purchased in 5 meter length and then cut. Hooked it to the brake light on the right side.What is the problem with the transmission dip stick, I haven't heard of any problem with that.

[@allensnook7760]

@@martinbuilt just hangs in there on mine real sloppy like almost like it wont seat properly.maybe too long!!!was thinking getting one of those truckers rubber twist plugs caps and welding on end to securly fit in the tube???snookie pa.

[@MacsSpecialitiesMotorsports]

Great detailed Video, now its time to get to cutting on my WJ! 🤣🤣🤣

[@martinbuilt]

Thank you. i'm glad you liked it and found it helpful. Good luck with your build.😊👍

[@MacsSpecialitiesMotorsports]

Thanks! I might have more issues with my WJ as I live north! Lots of rusty rigs!

[@8mileFreno]

If you make more floor plates w access cover i want one 💯

[@717UT]

Me too!

[@tigolbitties8352]

I would buy one too

[@billm5291]

Hes the Bob Ross of fuel tank tucks. Thats a happy little jeep.

[@martinbuilt]

Thank you, I really really appreciate that!

[@billm5291]

@@martinbuilt cant wait to do this on my 2001 wj. You make it look too easy though. Great idea and great execution on this project. This mod is almost like doing a lift kit. You get some of the same benefits. What are you going to use the void for now?

[@martinbuilt]

@@billm5291 so far I relocated the factory amp that was under the back seat to the void and then I moved the Power Distribution Block that was under the hood to under the back seat.

[@billm5291]

@@martinbuilt is the void big enough for a tow strap or tools? Probably still a good spot for the 4 way tire iron?

[@dshepard3161]

Had this on my list to do with the other rear end projects, bumper spare tire carrier, and raise the tank, the well was useless space for me as the 33"x 10" wont fit in it and trying to custom fit stuff to the space is less useful than raising the tank, now i know what to expect. just have to figure out how to relocate that evap system so i can tuck up the bumper better. Nice work on all your stuff Martin, keep up the good work. BTW i did the hydraulic fan delete as well, just a bit different, running 3 electric fans on mine, one full size hemi v8 electric pulling inside and two 10" behind the grill pushing, don't need to run either of the 10's unless i'm crawling at 110 deg + outside.

[@martinbuilt]

nice, what vehicle did you get your fan from, thank you for watching and subscribing.

[@dshepard3161]

@@martinbuiltOn the inside of the rad is out of a 07 Grand with a 5.7 (fan shroud fits fine even though it looks to big) and the small 10's behind the grill are off a 05 mercedes gl 500 that was next to the Grand (junkyard), right now running low speed off ignition and hi speed on a switch, waiting for a fan controller in the mail, seems to work fine so far.

[@sergiogomez170]

On minute 13:04 how much did u cut on the fueler hose side it look more then a inch and u dont say how much beside just that the video is awesome

[@charliedee9276]

Another excellent video. I had planned on this for awhile and after cutting the floor out to change the pump it has been moved to further up the list. Unlike Nevada in Michigan I have snow and cold coming soon so it has to wait until spring, my garage is dedicated to my Harley.. One of the biggest reasons for me is to stop dragging it on the ground in the woods. No rocks here but plenty of tight trails and mud bogs, that tank is like an anchor trying to back out of a mud hole, ask me how I know... Moving to AZ soon, looking forward to a totally different type of wheeling, lived out there in the 80's and had a 79 Toyota 4x4 p/u. Took that thing everywhere.

[@martinbuilt]

Thank you, yeah, I'm from Iowa used to do the wheeling in the mud and then send hours washing out the mud inside and out.

[@aju3307]

I recommend doing it, I bashed my fuel tank so hard it shifted over and ripped a fuel line out while in Moab, first project getting back from the trip was tucking the tank.

[@charliedee9276]

@@aju3307 Oh yeah, been there but not that hard. I caught it on a buried stump in the mud, had me held like Velcro not to mention pushed it up a far amount. Decided right then first project in spring is the tuck.

[@chejohnny3706]

wondering if u tried just a) flipping the spare cut out 180deg matching the factory bead rolls, b) just cutting 4 (or whatever) in from the spare cut out depth and putting back in?

[@martinbuilt]

that not a bad idea, other then it would eliminate any trunk space.

[@wjonthetrail]

Hello just saw your video I live in Pahrump And I just took possession of a 02 grand Cherokee With the gas tank out for a bad fuel pump But the replacement they acquired looks the same but does not fit It seems like it’s to big for the whole It does push down to the correct high but will not fit in hole the gasket seems to thick or the dia of the head is to big Have you heard of this before And how often are you changing these pumps

[@martinbuilt]

Install the gasket 1st in the hole of the tank, then slide the fuel pump assembly into the hole.

[@salvadorebertolone]

i recently dropped the tank on a 03 overland. i was able to pop all wire connections and lines before i took the tank down. i took them off the fuel filter and left the lines on the tank side. the main reason was i able to jump the pump from the connector to pump the fuel out.

[@miketee2444]

Welder sounds pretty good. You got it cranked on battle ship steel mode.

[@martinbuilt]

Thanks, it's a Miller 212 got it set on Auto. That seemed to work well.

[@weaton25]

I like your work very much I would love to do this like you I probably will not be going off road very much nowhere much to go where I live but I still lifted my WJ 2" with springs and put some Wrangler 18" wheels with BFGs and its nice to now that I could go off road if I wanted to. I am going off subject I thought about doing this much like you did a 4" tuck another Idea I had was to make a lockable gun case not many people would think to look in there for hunting guns as I got new BFGs they are strong so probably get away with no spare wheel got a can of that air stuff as a backup.

[@martinbuilt]

thank you, yea that would be a great idea, here is one of my followers that I sure you would like the way he has done his tuck.. facebook.com/media/set/?vanity=WJHoneyBadger&set=a.101620504908784

[@weaton25]

@@martinbuilt Thanks for that Martin.

[@LigerZeroFtw]

After your done tucking that fuel tank i think you need to do a tuck on that license plate and try to hide it aswell 😉 Lets go Pens! 🐧 On a serious note beautiful WJ man I hope that one day I can get mine looking as good as yours does! Got yourself a subscriber.

[@martinbuilt]

Thank you, Jon

[@bryanlail613]

I'd love to do this mod, but... The spare well is where my 2 optima yellow tops and 2000 watt inverter live. 😢

[@dironizareyes596]

Talk about custom fabrication. Awesome video! What state are you in? Can I send you a skid plate to fab?

[@martinbuilt]

Thank you. I am in Nevada. I don't have access to a beedroller anymore; my friend moved to Texas.

[@mlubnani]

Great job!!! Amazing!!! One question... how that affect to de gravity center?. Now you take 78 liters of gas over 30 cms upper. That is important or not?

[@P.A.C.E.automotive]

It's a Jeep, not a Porsche

[@semiprofessional8470]

In theory it raises the center of gravity but it shouldn't be enough to notice. I street drive mine with no sway bars lol

[@bryanthompson4323]

That's exactly what I don't like on my 01 GC. The gas tank is mounted so low to the ground. Wish I could do this to mine. Just wanted to ask you, have you ever used a Superchips tuner on a 01 GC 4.7 non HO before? Thinking about buying one to boost the HP a little and to eliminate the speed limiter too. Not that I plan to drive over a 100 mph though. Thanks Martin.

[@martinbuilt]

I have the Superchips Traildash 2, I love the gauge package and some of the bells and whistles it comes with but I can't tell any difference in performance.

[@danhambrick6331]

Nice job Martin.That plasma cutter sure came in handy.Are you going out to Rick's place for the bead rolling?

[@martinbuilt]

Yeah that plasma cutter does a great job. Yep went out to Rick's and got it done. Part 2 will start at place bead rolling that metal.

[@sotos2428]

I would like to see a walk around video of that Jeep

[@martinbuilt]

I would too...Lol, I would like the right conditions, cloud cover and back drop to make it look awesome. I started one a while back with the drone and it suck because I can't fly worth a dam but, I will work on it.

[@hyrumvazquez2345]

Lets Go Knights!!

[@martinbuilt]

Go Knights GO!! 😃

[@mudhound0530]

Thumbs up for the scribed line

[@martinbuilt]

I'm glad you liked it and found it helpful.

[@Danielprokopij]

Did you end up having any measurable space between the bottom of that plate and the top of the tank or was really close?

[@martinbuilt]

I believe at the highest point of the fuel tank there was 3/8 of an inch space to the bottom of the plate.

[@glennraney8827]

Where did you get the LED strip and how'd you install?

[@martinbuilt]

Got it from Amazon amzn.to/3eVJFup Just cut to length and then splice into either the brake or tail light wiring.

[@tutc2051]

martin great video, do you have one for the the hood scoop you installed?

[@martinbuilt]

Thank you, I do have footage of that but, it kinda of sucks so I never posted it.

[@tutc2051]

@@martinbuilt will keep an eye out just in case you do post it, BTW no more johnny joints available

[@kaseyjones2734]

Question. What did you use for painting your WJ? Did you spray it or did you have it professionally done?

[@martinbuilt]

This is still the original paint, brilliant Black Pearl.