“How to get your 49cc to go 50MPH - Honda Ruckus”

[@badtchad4935]

I can consistently get 55+ on my 2001 Yamaha Zuma just from changing the belt and weights. It’s pretty amazing what these little 50cc bikes can do. Good job on the Ruck

[@burnoutbobby]

Zumas are great platforms.

[@Zosh]

WHAAAAAAT! I can’t wait to join the 50’s club!

[@Denman500.]

Same here.

[@RuckStyleUK]

Great informative video content. Your getting so relaxed in front of the camera now and it shows. Keep it up man.

[@roorozco4517]

I'm convinced, good shit bro, by the way bro you're personal scooter is f...... Cherry! Thanks for the demonstration.

[@burnoutbobby]

Thanks I appreciate it man. Might be sold in a week so looks like if that’s the case I’m doing a new build series

[@raymondw6997]

Nice Video. I think i will be doing this to my stock Ruckus

[@burnoutbobby]

Raymond W do it!

[@paulreed6089]

I just did 50mph on my 06 met without any of that stuff on Bayshore Ave in South San Fransisco. I just replaced the belt , new polini & running all 5.6 weights. New NYC drive face,new spark plug,new air filter,fresh royal purple oil change. It was only hitting 32...now it hit 50...what's that? Well heck yeah it was wide open throttle bombing downhill. Hmmm. It now did 45 on level. Big improvement! Like having a different scooter! It turns heads now!!! 😎

[@burnoutbobby]

There ya go man

[@WaterBARTENDAZ]

Really !!! I have a 06 Met. I’m running 4.5 weights re jetted carb removed air box and can’t past damn 30 smh pls help !!!

[@paulreed6089]

the NYC driveface allows the belt to climb higher up the driveface. past the groove thats keeping it from maximum ratio needed. that NYC driveface part was the key to climbing past 35mph. i had a polini variator as well.

[@paulreed6089]

rejjetted carb with no airfilter? i used UNI universal foam sheet n cut my own filter and used orginal spot for filter. always use an airfilter unless you only want your motor to last very long. i also put a thin layer of grease before the filter that grabs lots of dirt n grit before it gets to filter area.also my scooter didn't last long at high speed. maybe a gy6 motor swap isn't such a bad idea.

[@burnoutbobby]

I appreciate it as I was the one who created that driveface for ncy haha

[@Theruckshop]

Man look at all those wheels on the wall 🙌🙌🙌🙌

[@chriswije]

Getting my ruckus tomorrow, will be trying new things

[@burnoutbobby]

Congrats!

[@BasicBenny]

the struggle is real!! lol, that's pretty awesome ...

[@davidlockwood8703]

Brutha dnt ya hate. The Tongue tied days. Still hzve those days.

[@Ermagawd]

Wish we had someone good in Syracuse. Sent it to a pro shop got it back and it won’t go over 13mph they said it must’ve happened after they dropped it back off

[@dj13yrs1]

The clutch and clutch springs will help it take off quicker

[@burnoutbobby]

Yeah but most want top end.

[@oscartorrez2365]

Bobby will u guys ever make a. Get rear fender like the. Gy6 ones lmk bud id love it if u guys work on one

[@burnoutbobby]

We don’t even make gy6 ones yet lol so probably not for a while

[@axelgaming4563]

I'm getting a Ruckus soon and was wondering if Trs kits are any good?

[@burnoutbobby]

AxelGaming45 only kit I’d get for the 49cc.

[@alanalilley3037]

NYC is good too

[@hostile_hero2697]

I'm super later late to the ruckus game but I'm most definitely thinking about keeping the get motor with all the necessary parts needed to give it a little spice. I weigh about 150lbs, my question is what would be a good weight of sliders or rollers that I should be using?

[@burnoutbobby]

I’d say 6g sliders as a start and see how you like it.

[@chrishunt7326]

I'm trying to get my reverse ruk trike up to speed can't wait

[@burnoutbobby]

Heck yeah!

[@davidlockwood8703]

Bobby. Got a maddog 50cc. 12x8 rear end. Look in. To swap 150. .wire harness. Short axel an engine. Mount. Budget. 2.000. Besides. Ebay an amazon

[@burnoutbobby]

I believe Cajun maddog will have the parts you need to make it happen.

[@davidlockwood8703]

@burnoutbobby cajan. Didn't wana honer. The. Triple. Tree. Cause. Of stress tracks. Cause they. Installed. The. Brake. The. Wrong. Way. From the factory. An because it isn't. A Honda. Is why most shops. Slammed. The door oh well I tried. Now see why I don't rely on solid. People. They dropped ya. Like. A rag doll

[@patrickcowan8701]

I got my ruckus up to 60 MPH. It was in the back of my truck.

[@fliptophead9]

Really enjoy your videos. I've been wanting a Ruckus for a while and am finally hoping to get one in the next few months (in fact, my wife said we might be getting a pair of them so we can ride together). I keep seeing all the possibilities with these things but, having never owned a scooter or motorcycle, I'm planning to ease into things. I am interested in the TRS Stage 2 kit, for sure, but it will be my first time really tooling around on something, with some help from a buddy of mine with a little more experience. I'm looking at it as a fun project/learning experience. Excuse the noob questions but, is the Stage 2 kit compatible with a 2018 model, and what would you estimate as the amount of time it might take to install all parts and properly tune it? Thanks and keep making these Ruck vids!

[@burnoutbobby]

fliptophead9 that’s awesome! They are a blast. Yes the great part about the Ruckus is all of trs parts fit 2003-2018. It’s the only vehicle Honda has made that hasn’t changed since production. So the stage 2 will fit. It will probably take a few hours to get it all on per scooter.

[@fliptophead9]

@@burnoutbobby Cool. Thanks, man.

[@shanepalmer9345]

@@burnoutbobby so this stage 2 kit will not fit on the brand new model 2022 Honda ruckus I’m also trying to get couple extra mph

[@burnoutbobby]

Yes it works on all years of the ruckus. We have lots of customers with 2022 already equipped with the stage 2 kit.

[@roywalls5595]

I be getting Honda ruckus style trike soon i like up grade go 45 +.

[@connorburns9688]

Sorry fur bad engrish

[@nicholasventura4107]

Nice bike were did you purchase Tiedown

[@burnoutbobby]

Theruckshop.com

[@keanukobashigawa179]

Hows the mpg with those mods? Cuz I'm 270 and wondering of it's worth the install

[@burnoutbobby]

It probably knocked it down from 109 mpg to somewhere in the 90s mpg range

[@gsgambe01]

Yo nice vid. Can you do more vids with other you tubers like you did with motonosity? You guys made me get one I bought all my parts from the ruck shop.

[@burnoutbobby]

gsgambe01 I need to get @motonosity out this way now that he lives closer I’d love to. Thank you

[@GuruBoards]

Awesome, and very helpful video. Thank you! I was really curious what pilot jet, what needle set up, and what main jet you’re running/Went with on that bike?

[@burnoutbobby]

Stock carb so no change in needle and 38 idle jet with 78 main jet and then just shimmed the needle

[@GuruBoards]

Burnout Bobby Thank you So sharing and spreading Your knowledge! I’m doing 45to50.8 flatland!!! At 160lbs. At 65° to 70° at Sea Level with 38/78jets, & MNNTHBX intake, Yoshimura Performance Exhaust, NCY CDI, NCY Coil, NGK Iridium Spark Plug, Polini Variator & Boss, stock clutch, Stock Bando belt, stock drive face, 5.5 Sliders... I think it might be running a tiny bit lean tho... if there’s anything you Feel, I could do to go faster I’m open to suggestions n mentoring...

[@burnoutbobby]

Stephan Aviles could be I’m familiar with his intake so not sure how that one runs

[@beanbagcrew9892]

Can you please do a video on how to install the Trail Tech Vapor? On the Ruckus please.

[@burnoutbobby]

I would but they have instructions already for this in the box they come in. I may put one on my new build but it won’t be happening for a few weeks before I would get to wiring it.

[@beanbagcrew9892]

@@burnoutbobby Will it work on a 2017 49cc Ruckus?

[@burnoutbobby]

Robert it will work on any bike. It just needs a power and ground. The rest of the wires are all external off the unit. It’s so much easier than the koso gauge.

[@beanbagcrew9892]

@@burnoutbobby Thank you and I'll be ordering one from The Ruck Shop.

[@burnoutbobby]

Thank you. If you want to wait a couple weeks when I wire the bike up I’ll try to get a video out ASAP

[@NOFx420x]

Why doesn't the vaper unit match gos speedometer

[@burnoutbobby]

Vapor will never match gps. I’ve answered this about ten times in the comments. It runs off a magnet system and isn’t as accurate.

[@NOFx420x]

Sorry that kinda stuff sucks but very cool build anyway

[@burnoutbobby]

Thank you. About a a year after this video came out the company koso came out with a gps adapter for their digital speedo and that’s been spot on for accuracy.

[@Win7ermu7e]

@@burnoutbobby LOL. People don't read or listen you know that. Hey, would you mind telling me where you got the mirrors and if they stay aligned ? Thx.

[@burnoutbobby]

Got them from the ruck shop. They should be under mirrors.

[@PhantasyGaming]

I must be lucky with the oem engine because i top out at 42-43 and my weight is 230

[@burnoutbobby]

You got a solid one

[@PhantasyGaming]

@@burnoutbobby yah mines as stock as stock gets and a 2009

[@nicholasventura4107]

Can you help me I just installed psp exhaust it’s way to loud for me is there any way to reduce the noise

[@burnoutbobby]

Which one did you get the budget or carbon tip

[@rickyreese1223]

Can I use a k and n filter u 20:38 p on pilot and main with a pipe. Stock air box.

[@mattyb9350]

I put a K&N filter with the stock air box in and it bogged, around 10 mph-20, did you get yours to work? I'm in the process of upping my main jet to 78

[@rickyreese1223]

@@mattyb9350 I had taken notes from a video that say this bike should be running 1 size up on the pilot jet after the break in period. Mine would start but take a minute to restart or hold the throttle. Then 1 size on the main if needed. Gotta check the plug to see how she is rolling.

[@burnoutbobby]

@mattyb9350 that should help with a 78

[@ianlegrand3450]

How you feel about the 150cc icebear

[@marlonuchiha8983]

its been 2 days he doesnt have any feelings for a clone

[@ianlegrand3450]

Guess not I guess if it's not a Honda it's not important

[@brianmccann666]

Seen icebear maddogs going FAST. 75mph on interstate.

[@burnoutbobby]

I never got this notification sorry I ride with guys who have clones. You can see it in my videos

[@burnoutbobby]

Not true as I have scooters that aren’t Honda’s that are fast

[@BiknutProductions]

That's fast for 49cc. Faster than my Tomos.

[@burnoutbobby]

We have a guy locally who hit 63 on his 49cc ruckus. That’s the fastest I’ve seen

[@officialyette7139]

@@burnoutbobby what did he have done to his?

[@burnoutbobby]

Not too sure he was secretive about it all

[@markn2393]

Probably weight reduction and aerodynamic work. Ect

[@davespooney8472]

That little 50 gets more speed than my stock GY6 125.... I’ve got some work to do!

[@shannon9487]

Indeed did you do. My Zuma 125 did 60mph stock. Now it does 74mph GPS verified with a 158 cc Big Bore Kit,, up gears, high-lift cam, and proper clutch and variator tuning.

[@GuruBoards]

You guys are the best! Hey! What’s the safest maximum rpm you can take a stock Get engine?

[@burnoutbobby]

9800

[@GuruBoards]

Burnout Bobby Thank you so much for the knowledge here’s my final results, I finally got to... At 65° to 70° at 160 pounds, at Sea Level with 38/78 jets, & MNNTHBX intake, Yoshimura Performance Exhaust, Polini Variator, Dr.Pulley 5.0/5.5 Slider combo, NCY CDI n Coil, NGK Iridium 6216 Spark Plug, stock clutch, stock Bando belt,and Stock dry face-best tune so far👌🏽 top speed-46-49.2MPH@9,800RPM’s...Flat Land

[@burnoutbobby]

That’s pretty good. How many miles on the belt and drive face

[@GuruBoards]

Burnout Bobby 710

[@GFPRACING]

Malossi Variator Installing for honda ruckus ? It comes with 2 Black Spacers / Washers ! 1 Large 1 & 1 Smaller 1 ! But my instructions are so small I can Not read them ! can you please tell me were they go ? Thanks you Very Very Much Thanks George

[@burnoutbobby]

I will have to look. I haven’t done a malossi one yet.

[@GFPRACING]

@@burnoutbobby that would be great if possable . thanks

[@josephmurphy2880]

Does tuning the scooter effect its legal status? I know for a 50cc you don't need a motorcycle license, and I know that you aren't increasing the scooter's capacity by doing these mods to it. I'm just wondering if, by modding the scooter in this way, I would be opening myself up to getting into trouble with a grouchy cop. Also, do these mods require me to stretch out the Ruckus in any way, or can I keep it looking stock? Anybody with more knowledge, please let me know.

[@burnoutbobby]

It doesn’t effect the law at all no. The cc stays the same you are just increasing mph. You do no need to stretch it for performance parts no.

[@MrCard031584]

Does the velocity stack come with the mounting bracket at the ruckshop?

[@burnoutbobby]

Yes it does

[@ebp609si]

Hey Bobby, any suggestions on weights? I’m about 215lbs I have the trs airbox delete, jetted, psp exhaust, rolling wrench evi, polini Variator, ncy drive face. I’m currently using the 5,6 provided with the polini and im only averaging about 42mph

[@burnoutbobby]

I’d try 5g sliders next time

[@ebp609si]

@@burnoutbobby thanks, I’ll try that and let you know how it goes.

[@MrHighdro21]

What jets did you use and did youbuse the shim washer on the needle. Cause mines laggs and slow after same setup but i used the washer.

[@burnoutbobby]

I used 82 main 38 idle jet no shim

[@HondaBikeLife4real]

Hey I love your videos! What app do you use to tune your ruckus’s? I like the way it saves your top speed

[@burnoutbobby]

I use an arm wideband for the serious air/fuel tubes. Otherwise with the 49cc I tune it off of rpm with a tach and mph.

[@HondaBikeLife4real]

@@burnoutbobby my mistake. I meant on your phone

[@burnoutbobby]

Oh the app is called max speed. For iPhone.

[@briantalio2180]

Just ordered a Polini Variator and have a NCY CDI but need a velo stack. I’m at 4200 altitude and about 200lbs, what do you suggest for carb tuning and variator weights?

[@burnoutbobby]

What exhaust do you have? Weights I’d say start with 5g and see how you like it.

[@briantalio2180]

@@burnoutbobby I think it’s a knockoff from eBay. It was on it when I bought it.

[@joshlaplant2599]

Would this be compatible with the PMZ 22 Icebear Maddog?

[@burnoutbobby]

. A lot of the parts do not work between the two bikes unfortunately.

[@chicagogeorge4966]

What is the range of rpms that I should be at when going 50 mph?

[@burnoutbobby]

9600-9800

[@Beardshire]

Why do you ride in the bicycle lane?

[@burnoutbobby]

On that one road the speed limit is 45 but they do 65 on it. I’m not trying to get run over lol

[@Beardshire]

@@burnoutbobby Ahh makes sense, I was not sure if it was a law or what. I will be getting one soon and was not sure riding it in the bicycle lane was legal.

[@burnoutbobby]

Beardshire that’s usually where the scooters ride on that specific road. You’ll see me on my black bike riding with the cars on that street since it does low 70s

[@NyuuMikuru1]

Beardshire Michigan M24 is right near me and there are only a very small parts that I can ride. North and further south, it’s 55-70 mph forget it.

[@FlipSideGarage]

Wat handlebar is that

[@burnoutbobby]

Trs trailtech handlebars

[@tonyd3266]

why dont you ride in the regular road and not the bike lane? people dont expect a tiny scooter to be going 48mph in the bike lane... if someone is turning left, oncoming - they cant see you behind the silver car you are dead. they are all drunk and half asleep in FL at stop signs... thats my rule -- 40k miles in florida.. day drinkers. I ride in the left lane for that reason... btw - great job on that build - what year is it ? !!!

[@burnoutbobby]

I already answered this a few times in the comments. This road speed limit is 50 and cars do 60 so I’m not going to risk it sorry. It may have been a 2018. Not sure. It’s been a while.

[@Jbop9312]

So you only did the 5.5grams or a mix ? I’m from Chicago and I have the same weights on my polini and I weigh 160

[@burnoutbobby]

Jbop9312 I first did mix of the rollers but my camera didn’t catch it. I did 45 with that. So went to 5.5 Sliders and that’s when I cracked 50.

[@jeremygibson2476]

@@burnoutbobby can i ask at what rpm you were at when you hit 50mph?

[@burnoutbobby]

I was close to 10k. I think 9600

[@wilfredorivera999]

Does Travis sell already modded rucks(gy6) ?

[@burnoutbobby]

Wilfredo Rivera do you mean trs? I don’t know who Travis is. We sell big bore motors but not whole bikes.

[@swiff777]

@@burnoutbobby how much for big bore on my 50cc gy6 challenger scooter

[@burnoutbobby]

We don’t carry those parts sorry

[@brianmccann666]

big bores are for 150cc gy6 i believe. Right ? How high cc bore kits do you guys go ??

[@burnoutbobby]

We only go 171. Keeps the reliability and still faster than 180cc

[@zgrahamcrackerc1]

Grew up dogging a friends old ruckus & absolutely loved it. Been thinking about getting one for my commute since it's so short. I have to hit a small stretch of 45mph with light traffic & would love to be able to do 50! Do you have a rough estimate of the price of parts to get a new stock model to those specs?

[@burnoutbobby]

Yeah look up the stage 2 kit on the ruck shop that’s the best way to go.

[@zgrahamcrackerc1]

@@burnoutbobby thanks brother

[@dab000yz2]

can anybody tell me who makes ATR parts i bought a 2010 ruckus GET from kansas city and has ATR parts all over it and cant find anything on ATR thanks

[@burnoutbobby]

They don’t have a us distributor anymore

[@Ted7772]

I got 2021 ice bear rocket 50 49 cc it hits 40 fast ..

[@andyproctor3588]

Verry verry nice its moving

[@burnoutbobby]

Thank you

[@tylerfraser9279]

Hey burnout Bobby how can I get my stock ruckus at higher stock speed without modding it much. I’m still paying it off. And the speed limiter is hitting at 41

[@burnoutbobby]

Stage 1 kit from trs

[@kashiaxiong]

What rpm is best suited to be in? Valve lift is 10,400 correct? I'm topping out at 39-41mph at 8300-8600rpm. I should probably go lighter sliders huh? I'm 250lbs

[@burnoutbobby]

Yeah I’d go lighter. I found that each bike is a little different but 9200-9600 usually works for me

[@BBM2323]

whats the best cam for the ruckus 2018

[@burnoutbobby]

I would leave it stock. It’s a pain doing a cam on a ruck. Had a customer just do one and said it wasn’t worth it

[@BBM2323]

@@burnoutbobby would 4.5 gram weights help with getting to 50mph for some one over the 200 lbs thanks for the info.

[@burnoutbobby]

It can help yes. It’s all about the supporting mods as well though.

[@BBM2323]

@@burnoutbobby thanks

[@danielsaul4083]

I have tvr velocity intake , hotlap exhaust, cdi jetted at 38/80. i weight about 140ish. Running 6.5 Sliders on polini variator and polini belt have about 150miles on it. did about 47mph. Whats should i do to hit 50ish Thanks

[@burnoutbobby]

May want to go to an oem belt. What rpm are you at when doing 47? Also make sure your tires are at max psi.

[@danielsaul4083]

Burnout Bobby ill try the oem belt. i dont currently have a tach so im not sure lol

[@burnoutbobby]

Daniel Saul if the oem belt has low miles it will be good. The tach will help you read rpm your at when you’re doing 48. You may have to go down on weights to 6 g to raise rpm and get you to cross 50

[@danielsaul4083]

Burnout Bobby I will give it a shot thanks man 🙏🏼

[@burnoutbobby]

Keep me posted

[@marcusriley4105]

So what app are you using on your pone

[@burnoutbobby]

marcus riley called max speed for iPhones

[@brad27w]

Great vid Bobby, question: I’ve got the polini w/ 5.5 rollers, you think sliders would help the top end? I’m hitting roughly 42mph. Also you said the stage 2 comes pre jetted? Do I need to buy and install new jets with intake and exhaust? Thanks

[@burnoutbobby]

The stage 2 comes with the jets needed for that intake you still need to install them along with the shim. Sliders or rollers won’t change mph if it’s the same weight. You’ll just notice a quicker pickup since sliders respond faster. I would do the intake and exhaust same time so you only jet it once. How much do you weigh. That will determine what weights to put in. You also want to have an idea what your rpms are as well.

[@brad27w]

Awesome, i'm right at 170lbs. I noticed a big acceleration boost with the new rollers and polini. Next step stage 2. Any recommendation on good "stock" street tires for the ruckus. Thanks for the quick reply and sharing the info.

[@burnoutbobby]

Yeah at 170 I’d say either a 5g with 5.5g mix or straight 5.5g sliders would be good. Yes next would be tvr intake and yoshi. Cdi if you don’t have one yet too. For tires the Michelin bopper is a great street tire. Do the 130 in the rear and 120 up front.

[@brad27w]

You the man Bobby, thanks for the feedback. Just curious, with the stage 2, Cdi, tires, finely tuned polini. What's the top speed I should be shooting for without doing any bore stuff? Thanks for all your help.

[@burnoutbobby]

You should be about 50 mph range. Don’t do a big bore you’ll hurt the motor. They overheat and burn oil. You end up removing the factory nickel lining and causing overheating. You’re welcome man I’m here to help.

[@chicagosbackbone]

I have the polini variator with 5.5 gram sliders, NCY CDI, UNI intake with the reed block off valve plate, GP exhaust, and michelin bopper tires and I'm struggling to even hit 40mph, and it takes forever and a day to get there. I can't figure out whats wrong. It used to hit 43mph stock. Have any advice? Am I doing something wrong??

[@burnoutbobby]

Did you put the jets in with the intake kit? Did you put the shim in? Hold many miles on the belt. How much do you weigh?

[@chicagosbackbone]

@@burnoutbobby I put the jets in, but I did not put the shim in. 900 miles on belt, and I weigh 160lbs.

[@burnoutbobby]

Chris Briddick is it was all done right with the install you should be at least 45-47. I wouldn’t put the shim.

[@chicagosbackbone]

@@burnoutbobby Okay. It runs fine it just doesn't go as fast. I live in Colorado, do you think the elevation is playing a role? Should i take out the carb and double check everything you think? Thanks for all your responses.

[@burnoutbobby]

Chris Briddick yes that and make sure your weights are installed right. Might have to go lower on the jets since you are higher altitude

[@danr7715]

My ruck has that same rattle when the bike is getting to its top end, is it the weights rattling when the variation is all the way open?

[@burnoutbobby]

joe dirt this rattle is his gas tank cover he has no bolts holding it down lol

[@mrrandom6250]

Hey bro, I live in wisconsin and have a stock ruck with 9000. It has an intake on it and that’s it. It’s pretty flat here in wisconsin can be hilly sometime, I weigh 149 and the ruckus does 42-43 consistently. I was gonna put a variator in. What kind of weights should I use and do you think with that it’ll help me hit 45-46. Sorry I’m new to the ruckus scene.

[@mrrandom6250]

9000 miles

[@burnoutbobby]

I’d try 6g weights. May be hard with that high of miles

[@gregatron4528]

Seems like everyone likes that round side mirror off the handlebar .. So I copied and bought a set too 😆

[@gilpambid8885]

Hey Bobby Question on the Polini variatore. What’s better rollers or sliders. Because people would say that you shouldn’t be using sliders only rollers are best for the polini variatore. Thank you soo much! Your Videos are every help explaining how to tuning a 49CC.

[@burnoutbobby]

Sliders all day. Don’t listen to those people. The bikes love the sliders. Thank you.

[@danielrodriguez8885]

What jet did you use ?

[@burnoutbobby]

The 38 and 78 with a shim that’s what comes with the tvr kit

[@danielrodriguez8885]

Burnout Bobby thanks for the info I’ll shim my carb cuz mines has a brake up around 15 to 20 mph and then clears up

[@burnoutbobby]

Perfect that will clean up mid range

[@BBBYpsi]

How come the speedometer on the bike only showed a high of 46.5 MPH? What speedometer app are you using on the phone? Also what would be the cost of parts & labor you would charge to do this on a stock Rukus?

[@burnoutbobby]

The speedos that are digital are only calibrated within 5 mph faster or slower. They are rarely ever perfect since they read off a magnet on the wheel and don’t always pick it up. That’s why I use the gps app it’s accurate with my cars so it perfect for the bike. We don’t work on scooters at the shop but I do on the side. Hit me up on my ig.

[@BBBYpsi]

@@burnoutbobby thanks for the reply. I also just downloaded the speedometer app thanks for that also.

[@burnoutbobby]

Anytime!

[@badassbikerst]

I weigh 230, 40ft above sea level, I have a intake, yoshi exhaust, ncy cdi, 38sj/85mj, what weights should I be using in my polini variator? Also have a new ncy driveface. Currently doing 42 with 6g sliders

[@burnoutbobby]

I’d go down on weights. That will raise the rpm up giving you more mph. I would try 5g and see.

[@badassbikerst]

@@burnoutbobby thankyou. Just ordered some 5g sliders

[@burnoutbobby]

Let me know how it goes

[@silas.anderson]

could you or someone else list the basic parts to achieve 50mph? im on a extremerly tight budget but already have the cdi but need everything else.

[@burnoutbobby]

Trs stage 2 kit

[@silas.anderson]

@@burnoutbobby wow..... i am so surprised you responded but thank you so much. definitely helpful.

[@burnoutbobby]

Anytime

[@jasminerogers9971]

Please include some links I'm lost, and want to order the wrong thing.

[@burnoutbobby]

Jasmine A email us at [e-mail] I’ll send a link.

[@jasminerogers9971]

Burnout Bobby I found what you were talking about. Also does this ruin the reliability of the motor?

[@burnoutbobby]

Jasmine A if installed correctly it will not effect the longevity of the scooter.

[@matt1357111317]

Hey Bobby, nice vid. Just wondering, what was your rpm when you hit 50 mph?

[@burnoutbobby]

Close to 10k. Think 9700

[@jonneet2126]

Nice!! But, are you going to keep running the unfiltered velocity stack? Does'nt seem like a good idea. Or was just for your speed tests?

[@burnoutbobby]

Been running that stack for 3 years. Nothing gets in. I explained In a video that the wind would have to match your speed then blow the object perfectly sideways to get in the stack. I’ve rode in rain and all conditions now with it on two the shop bikes since 2015 so it’s all good.

[@AKFitness2525]

Does the CDI really improve the bike !?

[@burnoutbobby]

Yes if you have supporting mods that get you over 40mph then it works. If you don’t use it then you can’t rev higher meaning you won’t get extra mph.

[@AKFitness2525]

Burnout Bobby is there a specific brand you got!?

[@burnoutbobby]

Abelino King I don’t have a 49cc but the only one I ever recommend is the ncy Cdi

[@AKFitness2525]

Burnout Bobby ok thank you for your help my guy appreciate it 🙏🏽

[@fctryoffetsh39]

Nice bike he has,I have a stock and ima see how long everything lasts,I get 38 mph and have 7600 on my belt.cant get a dealer to even touch it since people want to just rob you in cost,they assume your stupid,so ima get a impact and change it myswlf,nice work😊

[@burnoutbobby]

Yeah that belt and drive face probably need replacing

[@emberedits1342]

Does it still go only 25mph up hills ??

[@burnoutbobby]

I wouldn’t know. We don’t have hills in Florida

[@EbolaSquirrel]

@@burnoutbobby hahaha I live in TN,that sentence sounded weird to me for obvious reasons.

[@chayo9548]

@@EbolaSquirrel me too. Wow. I live in L.A.

[@YuckyGarage]

What was your jetting?

[@burnoutbobby]

JAmedia it was the jets that came with the kit. 38,78 and shimmed the needle with the velocity stack 1” out. Lip from hose

[@ezurmnd]

So my trail tech vapor says my revs go up to 12k rpms and i have a combination of 5g and 7g dr pulley sliders i top out about 40.5 i do have ncy plate trs stage 2 etc should i go higher on the weights keep in mind im 5 11 230lb

[@burnoutbobby]

Your rpm is double what it actually is. There’s no way it’s 12k. It’s probably more along 6k range. Your ppr may be off. Those 7g weights are heavy and holding you back. You need lighter for your weight.

[@ezurmnd]

@@burnoutbobby i was wondering why it was so high i have to check and see how can i adjust that or fix the ppr and after i figure that out i guess start tuning with lighter weights. Also when im riding at 15mph or not at full throttle i can here popping sounds from the exhaust does that mean im lean or too rich? Thanks in advance brotha.. 🙏🙏

[@burnoutbobby]

What jets are in there

[@ezurmnd]

@@burnoutbobby i really havent checked to be honest i bought the bike last friday i know it has the trs stage 2 intake but im not sure if they changed the jets

[@burnoutbobby]

The jets could be off. It usually will have 78 main jet 38 idle and then a shim on the needle.

[@ezurmnd]

50 by just playing with weights? What size would you recommend cor a 210lb guy on 80cc

[@burnoutbobby]

That’s tough because that 80cc is a different motor. But usually for the ruckus the peak power is 9500rpm so you will want to get in that range. I’d say 5g weights to start

[@ezurmnd]

@@burnoutbobby on these are at 8k 8.5k peak power ill give 5gm a shot are sliders really better than rollers or thats just waste of dinero?

[@burnoutbobby]

Orlando Rimax sliders are definitely better

[@mm-tg8oo]

So, what is right, the trail tech vapor or his phone?

[@burnoutbobby]

Phone

[@wellnessworldshop]

Bruh. Buying it all meow 😂

[@jeromehicks1414]

I would like to no if i can get my 49cc ice bear mad dog scooter to you in get my bike up to 50 mph let me no

[@burnoutbobby]

Unfortunately I have never worked on those so I’m not familiar and I don’t have the performance parts for that model sorry

[@matt1357111317]

Hey Ryan, I have heard that riding a scooter with the cvt cover off risks cracking the swing arm and damaging the engine. Is this a concern with the Ruckus? I frequently tune my cvt, and it would be convenient to just leave the cover off until I get it right. Thanks, and keep up the great videos! -Matt

[@burnoutbobby]

It can happen but it’s mostly with the gy6 not the stock motor as much. If you are doing it for tuning you are fine. The gy6 was more known for it and then things like the anklebiter came out to help keep that cool look but secure it.

[@matt1357111317]

Thanks, good to hear 👍

[@nordland2235]

46mph is what I seen.

[@burnoutbobby]

GPS? Or the speedo that’s off ?

[@congerscott6064]

Now i want one lol 👍🏆.

[@dreamkiss4u]

is it me or your real speedometer was correct and your app speed was 2 mph wrong every time and it was saying your are 2mph higher than your real speedometer on the Ruckus.

[@burnoutbobby]

If you look at the other comments you’ll see that the trailtech vapor is is anywhere from 2-5mph off due to its magnet based speedo and doesn’t always catch. So that’s why I use gps

[@rickyreese1223]

Fun

[@NVNGUYEN17]

I weight 110 what kind of weight should I get?

[@burnoutbobby]

Probably 6g or 6.5g

[@davidbinion2016]

good wow

[@jonathandorado8882]

Dude 45 u said 47 .. 48.5?

[@burnoutbobby]

I’m not looking at the vapor it’s off

[@arkadihughes4893]

I'm not sure where you're getting your speeds. You were calling out 46mph when the speedometer was at 43.8

[@burnoutbobby]

I’ve already answered this. The trailtech was not calibrated. I was going off my phone. Thanks.

[@arkadihughes4893]

@@burnoutbobby oooohh ok lol. Good vid!

[@burnoutbobby]

Arkadi Hughes thank you. I have another one I’m going to get into 50s soon that I’ll record

[@thewheycast9304]

if you could ever do this to a clone id let you use mine lol

[@burnoutbobby]

Haha thank you we will see what the future has in store.

[@thewheycast9304]

@@burnoutbobby is there any rideouts in zhills been trying to find some ppl to ride with

[@burnoutbobby]

There is not unfortunately. If you go on Florida ruckus riders you can post on their Fb and find local people to ride

[@nordland2235]

Mine does 40...its stock.

[@mistflip69]

I'm 205lbs and just ordered the Stage 2 kit for my 2020 Ruckus. Do you suggest the 5.5gram sliders or the other weights?

[@burnoutbobby]

I would try 5g to help spin the crank

[@aland1618]

zero to 30 mpz was roughly 7 seconds; not bad.

[@EbolaSquirrel]

I was mistaken,thought you said 20 mph in 7 seconds,deleted the comment but I said "thats....thats not good"

[@jesussoto8028]

I had a 05 that went 47 with just a polini and cdi

[@burnoutbobby]

Jesus Soto every bike is different and most don’t get that lucky id say 98% won’t have that luck you had. Especially not on flat ground and not drafting.

[@jesussoto8028]

Burnout Bobby yea i hit 47 on flats on the good days when it wasn't windy but than i switched to a 150 😁 wanted to go faster and it was a stock ruckus

[@burnoutbobby]

Jesus Soto 150 is the way to go

[@jesussoto8028]

Definitely you guys need to make a shop in Lehigh acres fl you'll definitely be having customers 😂😂

[@Joanchovyy]

that shit went 45.2

[@burnoutbobby]

Joanchovyy I mean the gps shows what I did Hahahaha.

[@RINEYMOTORSPORTS]

If you really did go that fast why is the Trail Tech off why wouldn't you reset it and make it right

[@burnoutbobby]

Trail techs are not accurate regardless they always get you within 3-5mph that is why. I have been doing this a long time and they read off of a magnet that doesn’t always catch right. You can calibrate it all you want and will still not read right. Hence why we don’t sell them anymore.

[@burnoutbobby]

Plus it’s right there on the phone gps what I really did if you are in doubt

[@r1sabotage]

What a waste of money to spend on your ruckus to make it go a few miles per hour faster. BTW, thanks for helping me waste my money, That few mph really makes a difference navigating through traffic.

[@burnoutbobby]

It’s a 49cc it’s not meant to be a street bike man. Don’t get a scooter if you want a fast bike.

[@r1sabotage]

@@burnoutbobby lol, dam does no one understand sarcasm anymore... Did you not read my whole post. After the first sentence were you lidke, "f this dude." I bought the kit for my ruckus and i love it...

[@r1sabotage]

@@burnoutbobby but i do see how my statement could be misconstrued.

[@burnoutbobby]

That’s how it came off with you saying I helped waste your money

[@r1sabotage]

@@burnoutbobby my bad, i appreciate the TRS making my ruckus better and the how to videos made everything a breeze...

[@alanalilley3037]

Needs nos

[@burnoutbobby]

Everything is better on the squeeze

[@Moonshinebikes]

efi your ruckus

[@burnoutbobby]

Deivydas G. Been there done that and didn’t go as fast and spent a lot of money

[@gerrynightingale9045]

**I want definitive PROOF that Honda is doing 50mph on a level-roadway!** (not 'evasive bullshit and excuses')( **a screamingly LOUD exhaust proves NOTHING other that it's 'loud as fuck!' and sure to excite 14-yr. olds** )**One 'CDI'-box is the SAME as every other one! Period. Although some, such as Honda/Yamaha have high-quality internal-components and very sturdy 'box-covers' that are designed to last for many years...ALL 'CDI's function exactly the same, and electricity does not 'move faster' because it has a sticker w/flames on it on the outside!** **WHAT WILL make a huge gain in 'top-end' is the installation of a wind-screen to increase laminar air-flow around the rider...this will generally result in 3MPH gain with no other modifications at all**

[@silvanbraendli]

Whats that in km/h?, cant figure out if its times 1.4 or 1.8. I know sea is 1.8 and street usually 1.4 but just to make sure I thought id ask, thanks