How To Glue Pull on a Bodyline🚙 tips and ideas

[@junreysepe9162]

Great man. May i know what kind of glue you are using?

[@Petersondent]

yeah i use tabweld its really good id like to try more brands but they are spendy:) thanks for watching and subscribing👍

[@franciscocolmenero6425]

There's a plug inside the door that gives you access to the top plate of the door

[@joelkoonce8559]

I've been in PDR for 25 years. I always appreciate Your honesty.

[@billstetler6769]

Love your attitude and your work

[@UnbthrdTV]

This is such an art, I work at a body a small shop and sometimes we call in someone to do PDR and its so awesome to see what they do.

[@Petersondent]

thanks so much for the nice comment👍

[@yumnbibou9898]

Thanks for this informative video. Do you have one showing how to hammer down the crown once you have used the puller?

[@Petersondent]

Yumn Bibou Thanks for watching yeah I have a lot of brow work on camera in my more recent videos. Thanks for watching and commenting. Much appreciated.👍

[@MrJdsenior]

That board is BRILLIANT. Will be making one! Thx.

[@Petersondent]

John Sikes The company that I buy it from is called Elimadent tools. Talk to James he's the man👍

[@sammylee482]

Jon Sikes did you get your board made? Im Mrs. PDR by the way, LOL, if you have any questions regarding the boards, we have all kinds of spare parts and I’ve actually personally rewired a couple of them because they are $500 each end I would highly highly recommend Elimadent, and as Garth said deal with the man named James, he’s been excellent us

[@tomfile3131]

Today is the first I've heard of glue pulling. Going to try it out on my 2017 RAV4 dent. Thanks for the video !!

[@janicecowan3649]

Just tried the puller with feet either side of the car dent. Glue sticks to car but not the plastic button . Am I doing something wrong. Also when your using the pointed punch what stops it damaging the paint.

[@Petersondent]

janice cowan Leaving the glue on the car and pulling off the tab is probably the best because then you can just remove the glue with isopropyl alcohol. As far as the tapper I use either a soft squishy tip or a really smooth plastic one and I don't hit very hard. Thank you so much for watching and commenting 👍 hopefully the videos help.

[@havingfun9880]

What is the chisel-like tool your using to do the finish work?

[@juanfigueroa.bioestadistic2081]

I tried it in my car, but the glue remained strongly attached to the sheet, what was the fault? Was it the temperature of my gun? Was it too hot? thank you for share your job.

[@Petersondent]

Juan Figueroa Tough to say. The Glues all have different temperature and humidity readings for your region. I also don't let the glue set for more than a minute or two I usually pull it after about 25 or 30 seconds sometimes quicker. The products I use for glue pulling are mainly from the Keco corporation. they have very high-quality products. Thanks for watching I have lots of glue pulling videos.👍

[@juanfigueroa.bioestadistic2081]

@@Petersondent thank you for your answer, you really do a great job.

[@joesalinas1697]

I like what you said about how you learned on your own and and how your not glassing it out just quick and simple give them a decent job and every ones happy😎

[@tricks351]

Ive bought the glue kit but still wanting to learn more before I use it on my car. These videos help so much. The hammer tapping is something that I have no idea how to do

[@Petersondent]

Thanks for watching and commenting it’s much appreciated

[@jonmike316]

What's the purpose of the hammer tapping? Got a dent on the body line itself.

[@JosephS078]

I’ve watched a few of your videos now and the skill/result is excellent! Top work👍 What kind of light board/cover is that you are using?

[@Petersondent]

JosephS078 Thanks, I have a tool reviews video on my light board. It’s from Elimadent in Texas. Thanks for watching.

[@jamesbarlowjr.3762]

Hello, Nice Job! What is the average price? And how to do base an amount on the dent. Thanks

[@ahmedal2333]

OMG, That is awesome work! If only I know how and where to tap down crowns using the board. Do you have any video about that?

[@Petersondent]

Yes I have a few actually a bunch of videos that focus on crowns and brow work. Please check them out thanks for watching and commenting👍

[@sammylee482]

Ahmed thank you for your comment that was so kind of you! I’m Mrs. PDR by the way. I make the videos. But I also have been standing over his shoulder for nearly 7 years watching every tap and move he makes, so I feel confident and giving some advice. That being said Always start from the outside and work your way in, make sure you find out or investigate the direction of the impact, because just due to physics it’s a lot easier to remove the dent if you try to pull it back out the way it was put in if you know what I mean

[@sammylee482]

Just never start in the middle of the dent thinking it’s going to just pop, that’s the quickest way to completely ruin a job

[@danielsoloboyleon9002]

I am in Los Angeles do you have any connection I have a dent in my suv on the passenger door ?

[@kitwalker520]

Like the sitar music thx!

[@dbnarizona]

Great video! Not sure on the tapping, but I am sure I'll get the hang of it! Thanks!

[@sammylee482]

DRB everybody gets nervous about the tapping! It’s normal, but Garth has dozens of tips that were specialty made just for this purpose. And he’s at the skill level where he knows exactly how much force needs to be used in tapping.And this is actually a pretty old video, you should check out some of the newer ones, we’ve upgraded it quite a bit of our tools and his skill level is top notch

[@sammylee482]

I am Mrs. PDR by the way just so you’re not wondering why I made that comment LOL

[@Keventhc]

what are you spraying to get the glue off easy

[@Petersondent]

i use isopropyl alchohol, but the stuff i use is 99.9% from germany made for electronics. its the best , thanks for watching and commenting

[@sammylee482]

@Keventh Campoverde I found it on Amazon, you can get a 48 ounce bottle for about $30 or so I believe. But will use it for everything because it leaves zero residue and you wanna make sure it’s 99.9%. Just get on Amazon and type in 99.9% isopropyl alcohol and you’ll find what you’re looking for. It’s amazing

[@prajwalkumarm605]

Hey the spray which you used to peal the gum off is that a soap water spray??

[@Petersondent]

Nope it is 100% isopropyl alcohol but usually it says 99.9% it's electronics grade isopropyl. Thanks so much for watching and commenting.

[@rudycastillo2684]

Whats the tip of the tool made of that your using to tap the dend the rest of the way out?

[@Petersondent]

rudy castillo That’s a PVC plastic tip knock down a tool I do have one with a soft rubber tip also

[@handyishrandyish334]

Why choose pvc over rubber what’s the deciding factor?

[@RobWillmot]

Where do you buy the glue tool kit and what does cost and what comes in the kit?

[@Petersondent]

RobWillmot I forget where I got my original lifter. A few companies sell the Polaris and the lifters but as far as the tabs atlas and Keco are very good. Hope that helps. Thanks for watching

[@jammin1881]

When using the glue don't go nuts and clean the car /tab with rubbing alcohol. It removes the grease and oils so the glue gets a better hold. Don't push hard as it creates a try thinner layer of glue.

[@imports4lifetoyotalexus98]

Hey how can you get the glue off so easily? Because I uses rubbing alcohol it never get the glue off so I have to uses paint thinner to get the glue off. Can you tell me the tips? @PDR Peterson Dent Repair

[@Petersondent]

TRY USING 99.9% ISOPROPYL ALCHOHOL

[@StormchaserZA]

Hi, quick question for you. Did you use standard hot glue with this fix?

[@Petersondent]

No I use Tab Weld, you can get it at tabweld.com

[@StormchaserZA]

@@Petersondent Thank you

[@gilaylett9423]

Well done mate. Got a tip for ya. For glue release I use metho. Methylated spirits. Cheap as. I tell everyone it’s a very expensive releasing agent.

[@Petersondent]

gil super thanks 😊

[@sammylee482]

@Gil Aylett I do all the ordering for Lee sorts of things and that’s the first I’ve ever heard of this methylated glue remover, we typically just use the 99.9% isopropyl alcohol and it works phenomenally. I am curious though about this product you speak of. Is it highly toxic? We try to do things as natural as possible

[@gilaylett9423]

@@sammylee482 it’s natural. It’s a spirit. You can drink it. But you will get drunk. Not advised. Cheers lol.

[@willie9397]

looks amazing from this view Im getting one of these kits hopefully never have to use it well done

[@Petersondent]

Thank you for your awsome comment and for watching! I appreciate you😊

[@sammylee482]

Hi Willie, Mrs. PDR here, what kind of kit did you get? I only ask because I do all the investigating and ordering for the tools that we have, and I might be able to give you some good pointers, since we’ve had our fair share of trial and error with tools...Word to the wise though, don’t go through Amazon

[@Me-hc4bu]

Awesome

[@Petersondent]

Thanks so much👍

[@vangrollerboi]

Great work! I've been watching your videos which is very informative on how to tackle different types of dents. Just ordered at glue type puller and will be trying it out on my cars.

[@Petersondent]

That’s awesome, let me know how that glue puller works! Make sure you only use the right kind of glue, the glue I typically use is called black plague from Keco. It’s absolutely necessary to have the right glue, as some is VERY difficult to remove from the tabs. I always use 99.9% alcohol I get off amazon to remove any residue and it works much better than the 91, or 70%. Another tip, never use glue pulling system on a non-factory paint job it may have a tendency to pull the paint off. Good luck my friend thanks for watching we really appreciate it! Let me know how it works.

[@duaneshadd777]

Thank you.🔨

[@Petersondent]

best of luck to you my friend hope the videos help:) please share and help the channel grow👍

[@Petersondent]

thank you 👍❤️

[@spillsy33]

that's impressive work

[@Petersondent]

spillsy33 Thanks so much for watching and commenting👍

[@sgoldens24]

Oh we finally get to see your wifey in the refection.......great PDR vlog thanks for posting !

[@Petersondent]

She’s kind of shy lol

[@hobknockers111]

Does anybody know if this works well with light hail damage?

[@jamesarthur3563]

Great video how can I get one of glue pulling kit

[@Petersondent]

James Arthur Thanks for watching and commenting James. I think there are a few good companies out there that sell glue pulling kits and accessories. Some of my glue pulling videos tell all the companies that I currently use. thanks for watching👍

[@jamesarthur3563]

@@Petersondent thank u

[@sammylee482]

@@jamesarthur3563 since I do all the ordering I will let you know LOL. Usually we go through companies; namely, Elimadent, Stanliner, A1 tools, And there’s a couple more I can’t think of off hand. I don’t recommend ordering things from Amazon when it comes to paintless dent repair tools though James. Garth master at dent repair, but I’m the one that runs it behind the scenes

[@sammylee482]

If you’re looking for an exceptional glue, I would highly highly recommend a gray glue, It’s a bit spendy but works in any temperature

[@andresmejia7741]

what brand pdr tools you use ?

[@Petersondent]

Andres Mejia I'm so glad that you watched and commented on this video. The PDR tools that I use for my number one which I call it is a PDQ-tools.com product. they are out of Kentucky. Are use a variety of tools in my craft and I just look for the best quality. Thanks again so much for watching and commenting hopefully I can be more helpful in the future.

[@andrewhaworth6374]

What's the glue removal spray you use 🤔

[@Petersondent]

I use isopropyl alcohol 99% it's specially made for electronics but it works great. Thanks for watching and commenting. It's much appreciated.

[@yolsclassics6347]

Wow... that is not 90-95%... This is like 99.999%. Well done!! I am so glad I am subbed to you!

[@Petersondent]

Captain ADHD Thanks so much for the awesome comment👍

[@sammylee482]

Thank you captain ADHD!! Yeah I have that too! ADHD LOL, Garth’s the master at taking the dents out; Don’t let me near those suckers, I Have a tendency to be a bit heavy handed LOL I am the master at taking the engines apart and putting it back together, we rubber band each other

[@tfoster2223]

Where and what type of glue do you use?

[@Petersondent]

tfoster2223 the glue I use is from the Keco company and it is called Black Plauge

[@Petersondent]

Thanks for watching

[@huckaberryfpv4986]

Had 2 sub,you do amazing work brotta🤜🤛

[@Petersondent]

Thanks so much for watching and commenting. It's much appreciated

[@sammylee482]

@Huckaberry Thanks for subbing! We really really appreciate you! I am Mrs. PDR by the way, we haven’t had many uploads here lately but I’m gonna get on it! This pandemic nonsense has really put a damper on us being able to be out in public videoing dent repair if you know what I mean

[@huckaberryfpv4986]

Wow amaaazing what you accomplished in that short of time,I'm waiting for my flattening toolz to arrive do I can work out some dents on my vehicles,cheers👌

[@samuelsullivan4645]

Great job as usual!

[@Petersondent]

Thank so much for watching!😀. It means a lot!

[@sammylee482]

Thank you Samuel! My name is Samantha! Pretty funny

[@sammylee482]

I am Mrs. PDR

[@myquickjab2098]

Great work sir 👍

[@Petersondent]

My Quickjab209 Thank you so much for the nice comment👍

[@rleschys]

It's like watching Bob Ross. Good job man.. wish I had one of those punches you have.. is it rubber tipped?

[@Petersondent]

rleschys Thanks for the comment yeah it has a soft plastic On top of an R 4 tip. Check out my Dent craft tool review video I think I talk about that tip:) thanks for watching👍

[@nickpanico5441]

Thanks Garth ,Looks good ! Nice camera work .

[@Petersondent]

nick panico Thanks Nick I really appreciate that and I’m sure the wife he does too

[@spencermoon1371]

good work looks great!

[@Petersondent]

spencer moon Thanks Spencer and thanks for watching

[@sergaudi287]

Классно всё сделал👍✌️

[@duaneshadd777]

Could someone please tell me what does the hammering do

[@Petersondent]

Duane Shadd May hammering and tapping is usually bringing down the browse or the high spots in the metal and allowing the middle to flow and move. The whole thing about Dents is pushing up from the bottom and tapping down from the top until the surface is pretty much even again. Thanks so much for watching hope the videos are helpful👍

[@cynt1111]

I can still see damage?

[@LSXMILLER]

👍

[@marksimmons3801]

i saw a ding on the final pan ! you missed a spot !!! hahahaha great work mr peterson !

[@Petersondent]

lol thanks brotha . good eye :)

[@marksimmons3801]

@@Petersondent just kidding with you man ! when i said great job i meant it ! keep up the good work

[@johnnybracciole5490]

Namaste...

[@Petersondent]

John Bravo thank you Johnny Bravo. Namaste 👍

[@GATO0421]

1500 to 2500 dollars to repair that dent??? dude you are crazy!!!! but good video

[@Petersondent]

GATO0421 I probably charged around 300 on that dent but yes, any good body shop would be up to $2500 to repaint the side of that car. Thanks for watching and commenting👍

[@sammylee482]

@GATO0421 Believe it or not, some of the dent repairs that we been doing lately have been creeping close to that price range! people are willing to pay it because of the fact is that a body shop will charge quadruple and keep your car for weeks, end up repainting it and not matching the color properly, and we get it done in a day and go right to their house. So there is something to be said for the cost of convenience. And there’s something to be said for being a mobile company because people appreciate when you will come to them and they don’t have to leave their home or leave their car somewhere

[@cybermember3006]

Very wonderful job!!Also... a ibg thank's for french user, Your only effort now is on translation, not on your job!!!!

[@sammylee482]

BCOB65 thank you for such a wonderful comment, I Mrs. PDR by the way, I have been trying to figure out this translations stuff for a while slowly but surely ill get more of them translated. We are so blessed and grateful that you watch so thank you

[@johnmclean5691]

Huge QUESTION... HOW MUCH DID YOU CHARGE THIS CUSTOMER???? KINDA IMPORTANT. DON'T U THINK?

[@Petersondent]

Not information pertinent to you ill sure say that!

[@rigzrigz]

What would you charge for a job like this? Come out well 🖒

[@Petersondent]

rigz80 rigz80 usually a dime to quarter size ding is 300 to 400 this one is a little more being on a body line, but I made the customer a good deal. Very nice person. Thanks for watching:)

[@Petersondent]

😂😂😂You know nothing John Mc lean

[@zross8471]

Stop moving the camera around on the next video please. Thanks for the vid though.

[@Petersondent]

Thanks for the comment wifey does that to give more angles:) thank you for watching👍

[@mikimouse37]

Tidavia estas verde, o te faltan gafas de aumento.

[@human1513]

You will not learn unless you start and try. That is what I did. That dent was a baby too do. There were no significant giant wrinkles for example. "Not going to do a 100% job" LOL. Amateur!

[@jamsmonster8835]

Far as training watch you tube and buy a puller😂😂

[@billstetler6769]

Love your attitude and your work

[@billstetler6769]

Love your attitude and your work

[@billstetler6769]

Love your attitude and your work

[@billstetler6769]

Love your attitude and your work