How To Hardwire A Car Dash Camera w/ Parking Mode

[@YankeeinSC1]

I sifted through about 10 vids on this topic. I suffered time wasting insults, like lengthy childish intros, having the basic function of a multi-meter explained and some erroneous information. Your video is concise and helpful and explains the features the manual that comes with these products seems to omit. Watched it twice. Thanks.

[@dial2fast]

Really appreciate your comment. Cheers!

[@robertteague6342]

dial2fast Do I need to turn the screensaver function back off again once I start driving?

[@xtduubx]

@@robertteague6342 No, it will record when in Screensaver mode.

[@orozcofamily8167]

Yeah. I’m gonna agree with most of the other comments about how this video is very well edited, planned, and put together. This is a good example of what KZbin content should always look like for instructional videos. Great job! Now I feel much more confident installing this and I really appreciated the point about testing the polarity to know which side is the hot side before adding the fuse tabs.

[@dial2fast]

I am happy you found my video helpful. I appreciate you taking the time to leave your comment!

[@chrisbarham7416]

Man, let me tell you what. Hands down the best walk-through on hardwiring a dashcam. Great content.

[@dial2fast]

If you want to install this hardwire kit and NOT needing it constantly powered, then just connect the fuse tap to a 12V ignition power source (instead of constant 12V). Doing it this way will have the dashcam turn off when you ignition is off.

[@wesleyhodge9457]

@@dial2fast in my previous vehicle I connected the Dashcam to a fuse for the air conditioning (device that only comes on when you turn in the car). However, I’ve done the same in my 2016 Altima and no matter what I’ve connected the Dashcam to (A/C controller switch, navigation system) it seems to have constant power.

[@dial2fast]

@@wesleyhodge9457 I did a quick Google on the Altima and maybe you can try the 'Power Socket' fuse

[@wesleyhodge9457]

@@dial2fast that’s exactly what I did yesterday and everything works like a charm now 👍🏻

[@dannyboy5086]

7:25 To anyone installing your dashcam for the first time, just make sure you run your cable behind and not in front of any airbags in your car's A pillar.

[@douglasdever6134]

Absolutely. Most likely the wire will not stop a deployment, however, if anchored well at both ends, it sure can cut the bag, preventing it from inflating correctly.

[@naughtysauce4323]

@@douglasdever6134 That bag will explode out at over over 200mph, that little wire won't stand a chance lmao

[@remotelylucy]

Yes indeed that is very dangerous

[@frankie1220]

5:57 This was why I almost gave up and paid someone to do this for me. I had all the wiring done, but for some reason it wouldn't work. It was because I plugged in my fuse tap the wrong way. Thanks guy!

[@powerstroke6217]

could not agree more. i heard it vaguely mentioned once in a different video and couldn't find it explained anywhere. this delayed my install by a few days because i didn't want to go ahead and do it without fully understanding it first.

[@knumbnuts]

I paid someone to wire mine originally. Two car batteries and 3 years later, when installing a new dashcam myself, I found that they wired it directly to constant power with no low voltage cutoff, which explains why my batteries kept dying. If you want it done right, do it yourself.

[@gibsonogholuwa9776]

This would be my very first comment on youtube after thousands of hours. I must say you forced me to comment because your teaching on this is absolutely brilliant. To also say a very BIG thank you to you, I have subscribed to your channel. Simple, straight to the point and result oriented. Thank you.

[@BCO216]

This is by far one of the best videos I've seen for hardwire for a dashcam. This video explains in detail when it comes to the direct power of the fuse. Great video

[@eranshalom1336]

This is the best video so far about fuses and how to plug them the correct way with understanding of what you're doing. Your simple explanation really digs it. No shortcuts of this important topic, yet no fancy terms without explanation. This is really the essence of KISS - Keep It Stupid Simple.

[@dial2fast]

Thanks for your comment!

[@JR-kr1lv]

That's the best video I ever seen on here to due stuff, I'm a backyard MECHANIC a DIY to save money, I learned from a very young age due to my father working for GM or General Motors just in case no 1 knows what it means, i took 3 years of AUTOMOTIVE CLASS at my HIGHSCHOOL and we had a Voc Tech school next door that most attended for 1 thing or another. You my friend explained tjis wiring system perfect and the best way, even I might of made the mistake of putting the wire into the fuse panel BACKWARDS, now after WATCHING this, I'll make sure that don't hapoen at all. I wished all dash camera companies offered these setups to buy seperate, I've been looking for awhile but dash cams are a 50/50 on a good one, the one I'm looking at now threw CNET in march of 2018 has it listed at i tjink 3.9 out of 5 stars and 1153 review's, thats great, I have and older vehicle and as of 6/1/2018 my STATE will be HANDS FREE DEVICES FROM CELL PHONE'S to GPS, They are sending out the entire FORCE threwout the STATE TO GIVE TICKETS OUT, THEY EVEN STATED THAT THEY WILL BE IN UNMARKED VEHICLE'S ALSO TO SEND THE MESSAGE THAT IT'S AGAINST THE LAW NOW. THATS RHODE ISLAND NOW. SO PASS THE WORD ON AND NO BREAKS ON TICKETS AT ALL, THEY MADE THAT CLEAR. SO Having a DASH CAM that I'm tired of calling the POLICE BY CELL PHONE due to reckless drivers thats driving real bad and almost hit me, I call and its the same story, I'll get someone out there when mo one is in the middle of doing there JOB, I once stated so why are there 2 POLICE cars just sitting in the parking lot now where we just drove by and car slowed down, they said there all tied up on calls, i state thats bs because there sitting and drinking coffee because you csn see threw windshields of car, I blow the horn and point but nothing, POLICE dispatch don't send out mgs fast in my city, once we had 4 cars blicking our road and couldn't leave, my wife got out to find out whats up and 1 car was brojen, so we asked if the other cars can move, 1 guy grabbed my wife by her throat and there was 4 big guys with gang tattoos that looked SCARY, well i gunned my SUV at HIM as my wife was looking into my eye's, the guy let go and i tryed to hit him and dialed 911, well 25 minutes later, they showed up and all gone, even the broke down car from tow truck. Just us and neighbor's bitching that we caused the problems with there GUEST, they didn't want to hear it, a dash cam would if showed all player's involved WITH license plates and their faces also, yeah it wouldn't be us causing problems but them causing the problems and what we stated was true and wasn't a lie and good thing they didn't have a knife or a gun or maybe they did and got out, I was not happy and nervous for my FAMILY after that. Been looking for dash cams even HARDER since, most don't work very well, sent a few back because they don't show much and hard to make out, unlike a home surveillance camera you can freeze frame each shot and blow it up to get the face or a license plate. I thought of buying a gopro since there a top CAMERA but over kill for ny needs, I would of but i found out the BATTERY only last up to 40 minutes to 1 hour or so, that's no good for dash cam at $400 or rvevenen the $299 one. So Again I thank you for this and I'm gonna look at the camera you have that you hooked up, if I like it then I'll go with it but I'm leaning on the other 1, they even show the negative on it, you must shut off when parked or put in parking mode and the screen will stay on unless you setup the screen saver for 30 seconds or longer, if not yhen continues with screen on, the camera still records if it gets bumped & records until you stop it. Again best VIDEO I seen yet with the best step by step how to install and very clear on it. Its wasn't rushed or nothing like that. GREAT JOB TO WHO EVER DID THE VIDEO UNLESS YOU DID IT TO THEN GREAT JOB, NO ISSUE'S AT ALL WITH CAMERA GOING OFF OR GETTING DROPPED. I'VE SEEN SOME GOOD VIDEO'S FROM BIG COMPANIES THATS SELLING CAR PARTS AND NEVER TO MY VEHICLE OR EVEN TO THE KIND LIKE FORD STYLE, IT MIGHT BE ON A TOYOTA, NOT THE SAME IDEA'S WHEN THINGS ARE DIFFERENT ON CERTAIN THING'S.

[@eponymousIme]

Very clear video: you told us exactly what we needed to know, distinctly, and without skipping over steps or assuming we knew certain things. I have bookmarked this and will be returning to it once I get a dashcam.

[@joshuarozario5654]

I would have to agree with 100’s of comments here. By far one of the best and simplest videos that explains the process.

[@TexanTx]

Thanks A Lot! I asked few places professional installation not just money they were telling me it will take about 1 to 2 hours. After watching your video I was able to do it by myself less than half hour. Thanks again.

[@paulwebb4402]

i have been trying to hard wire my dash cam and have watched other videos but they dont give full instrcuctons, then found this video and it details every aspect of wiring, after watching i wired my dash cam in minutes, thank you for the precise detail and instructions, PS, best part is i also have a pathfinder so even showing of the fuses was very helpful

[@dial2fast]

That's great to hear. Glad you got the install done. Cheers!

[@graywood6794]

Best install video ever! After waisting a lot of time searching I'm glad I found this. It has everything you need to know in clear concise order.... Thank you Sir

[@shanedude120]

Thank you for this amazing step by step tutorial. Very helpful. However I just have one dumb query. I have a multimeter but I'm not so sure how to use it to detect the continuous power supply thing which you did at 4:32 . Where does the negative of the multimeter connect to. Could you please let us know that part of the connection. Thanks .

[@erictheberry]

You can touch the negative of the multimeter to any unpainted part of the car body, like a bolt or similar.

[@shanedude120]

Thank you

[@SuperDixxxie]

This is by far the best videos I've seen for hardwire for a dashcam

[@paulbradford8240]

Thank you. That is very informative. I bought a hard wire kit for the dash cam that I'm about to install in my daughters car. I asked at the shop if it was easy to install and their technician said that it was. All I had to do was find the wiring under the bonnet (hood) with constant power and switched power as well as an earth. When I opened the kit, it was very similar content wise to yours. Having watched your video, it is a much easier job using the fuse box than he intimated. My only difficulty is there is the tighter space in a Skada Fabia 3 fuse box. I'll take a look at hard wiring my own dash cam too, which has a different connection on the power lead.

[@tsutaz]

This really helped me as I installed my dash cam using the updated hardwire package, this past weekend. Thank you

[@juroya82]

Best DASH-CAM HARD-WIRING VIDEO I've seen; and I've seen several during the past few days. Thank You

[@dial2fast]

Thanks for your comment!

[@EdLanier]

This is the best, and simplest auto dash cam installation video.

[@richadams7732]

Excellent video on every level; very professional and easy to understand. Thanks very much for taking the time, it's truly appreciated.

[@totom5095]

So concise.. this guy has given me the confidence to take the self installation on. Thank you 👍

[@DaylnD]

Thank you very much! This was a HUGE help! I had actually just gave up for the day when I watched this and decided to go back out and add a 5amp fuse to the fuse tap for the dash cam along with the 15 amp that was already there. I thought by all the other videos that since the dash cam only draws like an amp maybe two that I could just tap into the existing fuse without malfunction but that’s exactly what I got was an error upon starting my truck saying I had a malfunction in the same area I had tapped into. You saved me from going to a shop to have them finish it for me. God bless!

[@gdwill817]

Very nice video and you did confirm what I was looking for in hard wiring. The sound was great and step-by-step instructions was spot on.

[@getsmartpaul]

Hi, it's now July 2021 and 3.5 years later and almost 350K views. Such an excellent video it makes other videos seem useless in comparison. Looking forward to more ! Thanks :)

[@ostapbender5791]

nice video, I was always confused how hard wire dash cam and which fuse should I use. to not drain completely car battery.

[@rovd4433]

Thank you for sharing your knowledge. Very informative and you're a very patient minded guy and you make a great teacher as well. God bless you.

[@JAAJ-sm2nt]

Fast forward to 2022. Are hardwire kits for dashcams nowadays can be installed the same way on your tutorial? Specifically for Azdome M550.

[@A_guan]

I have a question about the crimping wires part. Do you only put in the exposed metal into the add a fuse area? Or do you just put in the wire all the way till you couldn't go anymore?

[@dial2fast]

When you crimp a wire, you first have to strip the end about 1/4" to expose the wire. Then insert the wire into the crimp connector until part of the wire's insulation is also in the crimp connector (so no bare wires exposed on the outside to cause any short). The bare wire should be inside the metal part of the crimp connector, then use the tool to crimp it down.

[@ianhartland2541]

Well explained. I made the mistake of populating one fuse socket on the piggy back cable, on connecting to central locking fuse. Camera worked fine, but I couldn't lock my car! Soon realised why. The cables did not with any instructions. May be obvious, but do not use a fuse that is connected to critical systems, eg. ABS brakes, or engine management systems.

[@canalilucato]

Great video congratulations. Just a doubt. When you park your car and turn the car off, how it starts to record parked: 1) when you hit the door and the sensor detects the movement and starts recording (Parking mode), or 2. It doesn't stop recording all the way until you power off the dashcam manually? Thanks.

[@miyas5]

Great video. When adding the second fuse to the fuse tap does the fuse need to be the same amperage as the existing one that was pulled out?

[@dial2fast]

The fuse rating that came from the factory must remain the same. The other fuse that you are using to power the dashcam can be one suitable for your aftermarket accessory. I know these hardwire kits come with a 10A fuse and most dashcams only requires 250-500mA to power. You can put in a smaller fuse if you want for the accessory. So the two fuses you install in the fuse tap does not have to be the same.

[@miyas5]

dial2fast thank you

[@miyas5]

Hello. I was able to hardwire my Garmin dash cam and parking mode works great. I wanted to thank you again for the informative video.

[@toddsmith1617]

Mine came with 5A fuses. ?

[@simplycharlie15]

Informative, straight to the point w/o any fluff. Thank you.

[@DBR00]

And not to mention shitty, annoying, and unnecessary background music.

[@ShotgunGaines71]

Thank you for giving the clear, concise video we want and need. This was a tremendous help.

[@juan17155]

This video should be at the top of the search result!

[@MB212]

Good setup you got there! Was thinking to buy hardwire kit for my Garmin dash cam but its cost like 30$ so was thinking why not buy a 12v socket extender for 5$ bucks and then hardwire it working the same as long you not going with parking mode.

[@MsCh1mp]

Good video mate. I purchased some fuse taps for my dashcam and footwell lights. If I'm gonna tap it on 10amp fuse does it mean the other fuse for piggyback can also be 10amp or lower? thanks

[@dial2fast]

You should put in 10A or lower

[@MsCh1mp]

@@dial2fast thanks man 👍

[@narefeen2003]

Where did u get the foot rest cover from? lol i need one. and thanks for the video..i was heistant about installing dashcam in my nissan rouge 2015..now i know what to do!

[@dial2fast]

Hi I did an install video: kzbin.info/www/bejne/j3fCfoignpKjmaM

[@tranjoshua9860]

The video is very great. What is going on if I put the hardwire kit wrong side in the fuse box? Can I have the hardwirw kit link?

[@Blinx777]

6:35 I have 2011 infiniti g37s coupe and I can't find where to put the ground wire to?

[@Blaydrnnnr]

Very good videp. I'm pretty good at using fuse taps for many things on my cars, but this was very helpful and easily instructional for those who havent. But... a question.... Can you use this kit for a dashcam that you are NOT going to have powered constantly? I can just install the fuse tap into a switched 12V source right? I'm not sure I trust the auto off feature of the kit to keep my battery safe. I dont know yet if my Rexing V1P 3rd gen even does parking mode....

[@nonsolotesla]

Hi, I noticed you used a 10A fuse on the top and the original 10A fuse on the bottom. What if I have in the car only 5A and 20A fuse? Could I use a 10A on the top and the original 5A? The same for 20A...

[@dial2fast]

Yes you can use the 10A on top and keep the original at the bottom. All dashcams use less than 5A current. So technically, you can put 5A at the top, but I am was just using what came with the hardwire kit.

[@derekt7606]

Five star instruction. Excellent watch.

[@kingpin71]

How do you know what amp fuse to use on the camera side of the 2 fuses? My kit had 3, 5, 7.5, and 10 amp fuses in the package.

[@dial2fast]

Most dashcams require less than 1 amp to power. You can install the 3 or 5 amp fuse. If there are any short on the circuit, the fuse will pop open.

[@RedHeadForester]

Absolutely fantastic video. Concise and comprehensive, and straight to the point. 👍

[@davidsibble7429]

Thank you Thank you 😊 The Wifey needed this ASAP

[@gaboaaa23]

hi, are these 12v to 5v save? I mean they have no ce sign on them. Also its not a good idea to run the cable on the a pillar with side curtain airbag. It can block the airbag when its deployed

[@Wenjby]

Is it nescessary to add fuse after the fuse tap? I mean an in line fuse as i saw on your video?

[@dial2fast]

You don't have to put a fuse after the fuse tap.

[@ngouviet420]

i went through a few videos.. thank for making a clear video. i bought the hardware kit you suggested too. thanks bro.

[@rabity]

Why is it important what side the add a fuse device is facing or which one is left or right? Is it so that the fuse will take the surge if there is one and not go straight to the dash cam?

[@dial2fast]

Because when you look at the 'add a fuse', there is an input side and there is an output side for the accessory you are connecting to. If you flip it opposite to what I showed you in the video, you will connect the output side of the add a fuse to the input side of the factory fuse box, therefore the accessory you are connecting will always have power without passing current through the add a fuse.

[@tardeliesmagic]

@@dial2fast I just purchased a car cam online so waiting to be delivered,what fuse is used 5 amp? As in another video a 10amp was used.

[@sobek6113]

when you test the fuse voltage you do it with the ignition on or off?

[@dial2fast]

For this install, you are tapping battery power so there will be constant power. You don't need to turn on the ignition. If you want to tap ignition 12V, then you will need to turn on the ignition.

[@torukojinnn6331]

Dude great video, that dash cam has an internal battery or supercapacitor?

[@randemtask]

I have a kit with both red power and yellow acc wires. Any recommendations on which fuse to tap for the acc?

[@caldynphillip]

Some units have a yellow wire, where does that go?

[@dial2fast]

If the hardwire kit has 2 power wires, one goes to constant 12v, and the other wire goes to ignition 12v. I won't say yellow is ignition 12v because the manufacturer will mix between yellow and red wire and which one is constant 12v or ign 12v.

[@caldynphillip]

@@dial2fast ok thx

[@uniteddrones7626]

@@caldynphillip yellow might be for rear parking mode “ maybe connects to reverse light?

[@robinthomas3231]

@@uniteddrones7626 nope definitely for the ignition 12v to check here for an example. www.viofo.com/en/accessories/108-80-3-wires-hk3-acc-hardwire-kit-parking-mode-cable-for-a119v3-a129-a129ir.html#/38-fuse_type-not_included

[@TheEbc89]

The red cable is touching the fuse and the black cable?

[@monteroapx]

Great video. Did you notice any changes about the battery charge?

[@elit3physique]

2:22 the label says VOLT/CURRENTOUTPUT: DC5V/2A. Why has he put in a 10AMP and not a 2AMP into the piggy back? If I have a 20AMP will that damage my dashcam?

[@JanPeterson]

The box is sending 5V and 2A to the camera because that is what the USB spec says and the camera is powered by a USB plug. The box is accepting 12V 10A from the fuse tap and monitoring the voltage coming from the battery and will turn off power to the camera if the voltage from the battery gets too low. This is so the camera doesn't just totally drain the car battery if you leave it on for an extended period without driving (like at the airport or something). He is using the 10A fuse because that was what came with the hardware kit (the little box).

[@dolo_kaayy]

other people videos are more complicated to understand than the wiring itself🤦🏽‍♀️

[@amolkadam0904]

Very informative and precise video. Just one question, since we are connecting it to the internal fuse, will it affect the warranty?

[@vincentfazzi9505]

Very good video. Looks like I will try to hardwire it again soon. I may now know what I did wrong the first time around. Thanks

[@shamsgardeningcrafts]

Iv got another question iv got my rear number plate camara, on the wiring it hasent got a ground cable to connect onto the reverse light it only comes with red cable and the plug that connects the camara does it need a ground cable

[@loganspangler1424]

Explained everything I needed to know & more! Great content your making! 💯

[@alansadighiani1634]

Superb and Quality workmanship , I have an E class 2017 , W213 model any chance of demo how to fit dash cam to this model please , if it is not possible , could you tell me where I can locate the Fuse for the cigarette lighter . Many Thanks Alan

[@angkham]

Thank for thr video! New to electrical and I was curious as to why my hardwire kit was not powering my dashcam but I think @6:00 explains my issues. Gonna flip the connection and see what happens, thanks!!! Great video and clear explanation 👌

[@sookasians2871984]

Hi, thanks for your video . I would like to know if this would be work with viofo a119 dash cam that has a mini usb as well or not . please let me know thanks.

[@FaarisFarooq]

Yes as it needs constant power for it to work

[@cyrus773]

Best tutorial ever...kudos to you.

[@אליהשמש-ב2ק]

Hi, I have a mini fuse type hardwire kit The ACC and BAT + are without a fuse splitter, meaning that only one fuse is embedded in them without the ability to connect to additional fuses. If you are interested I have a picture for a clearer illustration. Can I perform the installation as well?

[@YouLookinAtMe-Bro]

Thank you! I really enjoy your tutorials.

[@AskTheDogGuy]

My kit looks similar but did not come with a fuse. What size fuse is appropriate? Also, does the size of the fuse (should it be higher or lower than the original in the slot - and the order it's added (top vs bottom) impact the original fuse purpose?

[@dial2fast]

For a dashcam, you can use a 5 amp fuse as the device use much less current than that. If there is a short, the fuse will blow right away. The add on device fuse is independent of the original factory fuse (they have 2 separate outputs).

[@rahulgogoi8335]

@@whatyouseewhatyouget3021 how would u get current flowing through d circuit if there is no fuse?? So in short, no...

[@SecretAZNman45]

Besides not powering up is there a negative affect if tap is plugged in backwards?

[@dial2fast]

The device will power up either way you connect it BUT, if you do it incorrectly, the device will not have any fuse protection. Basically it's bypassing the fuse.

[@SecretAZNman45]

@@dial2fast ok thanks

[@saaaleee]

I have Nisaan Maxima 2017...I connected it to room lamp fuse..it is ACC . Do you think it will keep powered for ever or it will disconnect the power after a while?

[@getsmartpaul]

Question on inserting the 2 fuses into the fuse tap. How do you know what direction to insert the fuses into the fuse tap ? Is their a + - marking ? I looked at the fuse I removed and it is not marked. Thanks :)

[@dial2fast]

Fuse itself is not polarity sensitive. You can insert it either way.

[@getsmartpaul]

@@dial2fast Thanks ! I tried it and made sure the far end of the fuse tap was inserted into the "hot side" of the fuse socket. :) I did have a problem trying to pull the tiny fuses from my Lexus with a needle nose pliers but it couldn't grab it. I finally figure out that in the Lexus under the hood fuse box there is a white plastic "FUSE PULLER" in the fuse cover that works !

[@johnnatanramirez8027]

Hi! Very helpful video. I have a Question What happens if I connect the fuse wrong? I have a VAVA dual dashcam and I did all the steps but when I turn off the car the camera never turn off just keep recording. I tried manually turn off the camera but the camera turn back on after 3 sec off. I didn’t check the fuse connection I just plug in the fuse without check I don’t know if that is the reason the camera keeps running all time. Thanks man.

[@deerock8545]

Great video.. But always connect to the camera before you put the wires around your pillars... Could have a bad wire and have to take everything apart again

[@yellowlabdavis7170]

A good acc fuse, radio. ? A good hot fuse , dome lights? Thanks👍🤔

[@txdraw]

yes

[@yellowlabdavis7170]

@@txdraw thx👍👍😀

[@neiljackman8962]

Great video, is this kit compatible with any brand of dash cam or is it designed strictly for the dash cam in your video?

[@hl3369]

How do you know is the left side is the output side? Sorry I m also trying to hook up my cam and this is kinda confusing to me? Do you check by lining up the fuse with the rest that are mounted on the panel?

[@dial2fast]

Remove the fuse and use a multimeter to probe each side of the fuse slot to see which side has voltage. The side with voltage is the input to the fuse. The other side of the fuse is the output.

[@hl3369]

@@dial2fast Thks much appreciated.

[@Ohidk91]

So I have to ask. I bought a hardwire kit & the color fuse is orange(5) Do I have to follow the same color fuse pulling one out the fuse box or can I go the same route he did? 10 red? Sorry if it’s a stupid question.

[@cryptoradar4649]

At 6:10 of the video you are showing the fuse and make it sound obvious that the left side is connected to the constant 12 volt, but there are no markings...how can we tell which side is what...sorry if it's a stupid question lol

[@dial2fast]

At 4:40, I showed you how to check which side of the fuse is the power source with a multimeter.

[@charlie996]

Very good instructional video that's clear and concise! Good job man!

[@hengkygoh6156]

Is this wiring kit/ method messing with ur fm radio reception? Cuz my dash cam with the adapter plug into the cigarette lighter does mess with my car fm radio.. So the signal is weaker..

[@matthewmedeiros6472]

Thank you. Really informative and well-explained video. I did have a question though. How do you know which fuse tap is appropriate for your car? I bought a dash cam that came with hard-wiring cables, but no fuse-taps, so I'm realizing I will have to order some, but I'm not sure which type to order.

[@dial2fast]

Go look at your fuse box and see what fuse type your car uses. Then order the appropriate fuse tap (see buying links in the video description).

[@johnrain6006]

so far so good for me as a beginner 100%rated

[@dycars8443]

Hi, i just want ask to ask when the car is parked on parking mode and sense something and turn on start recording.. You mentioned you have manually switch off it doesnt automatically switch off. Its will drain a battery?

[@dial2fast]

The manually turning on/off of the dashcam is to do with the way this particular dashcam operates. Many dashcams will record the parking mode events and automatically shut down, and go back into standby mode. The hardwire kit will provide power the dashcam and once it reaches the cutoff voltage, it will shut the output voltage off to prevent further draining of the car battery.

[@hassemsadiq]

Hi awesome vid will an audi A6 61plate have any problems when hardwired and reverse camera thanks

[@DankDr5nk]

do i have to manually turn off the dash cam each time if i put it into a fuze that only works when engine runs?

[@juliogiron4279]

Excellent tutorial. Thank you, your way of explaining is very good. Thanks again for sharing.

[@bamse5279]

Great video, but where do you hide the Power box?

[@dial2fast]

Just tuck it under the dash and tie it up with some zip ties.

[@tonyanderson2269]

I have dash cams, rearview dash cam, radar detector and dedicated power pack for dash cams, and I'd like to hardwire all these items. How many fuses can I tap (pull) from the fuse box? Also, does it affect the operation of the car electronic components? Thank you. Great content. Thank you for your contribution.

[@dial2fast]

1 fuse circuit for battery pack and 1 for your radar.

[@SkywalkerAnakin996]

Hey, I found a hardwire kit that has a build in battery protection that stops at about 12.4 Volts. I’ve got a brand new car and want to hardwire my car. But I have two concerns: do new cars have problems with something’s that is constantly draining the battery? 2. how long would it record until it shuts off? I’ve got a AZDOME gs63h. Never used the parking mode but on my new car I want it to always be on. I’ll even add a back camera for the cam since i don’t want to mess with the oem rear view cam.

[@dial2fast]

Some new cars will monitor battery drain and give you a message on the dash telling you of this. An example is the Hyundai / Kia vehicles. You can still install dashcam and other accessories. It will just have that message on the dash. As to how long parking mode will run for, it depends on the type of dashcam, how many channels, how the parking mode record the video (time lapse, impact, motion). Also the runtime depends on the health of your car battery. If your battery cutoff is 12.4v, with a 2 channel dashcam, you might get 2-4 hours of parking mode runtime.

[@EnglishRain]

Does the fuse box remain open afterwards?

[@john-s9m3f]

What's the other, circular cable that's plugged in to the left of the USB power cable on the dash cam?

[@webster695]

Really good video. Yours is the third I’ve watched, and the only one that gave me full confidence in doing this myself. Thank you! Off to buy the kit now.

[@imstillaliveimstillalive928]

the graphics pixel view so clearly,. 👍

[@MyNameIsNidos]

Thank you for this, it's a lot easier than I thought!

[@Chris-fy8rk]

The kit i have already has a 5amp fuse. Where i want to place it currently has a 20amp fuse. Would that be a problem having two fuses like this? Thank you.

[@dial2fast]

No problem. Install the factory 20A fuse in the bottom slot on the fuse tap, then keep the 5A fuse in the top slot. So the factory circuit still uses the original 20A fuse.

[@patricioperez1985]

I get sparks when connecting the negative node ...

[@michellehr93]

Is there a certain fuse I can tap into that will turn the cam on and off automatically with ignition but still record with parking mode if someone backs into my car?

[@Mixwell1983]

No there isn't, the power is either constantly on or only on when the key is in the accesory position.

[@andiharper4498]

Good video. The only thing I don't like is the need to manually switch the dashcam on & off every time the vehicle is used because of the need for permanent power for the Parking/Motion monitor.

[@ynonser5804]

thanks for the video! i did excatly as shown. now my dashcam starting as mass storage!! any ideas how can i fix it?