How To Install A Crossmember or Subframe with Basic Tools Part 2

[@poochee2010]

Good Job!. Give God the thanks because he owns everything, and gives us knowledge. Amen.

[@markmathis336]

Great video, did you have to disconnect any power steering lines or radio lines?

[@hypertrophy07]

Great video man!! What were the torque specs?

[@CabernetKev]

Were you able to get the new subframe from a salvage yard? If so how much did it cost?

[@halwynhaldene2253]

Your video was very informative I just did the same thing to my Acura TL 07 cracked subframe thank you for the video

[@Xainlrd]

Have you run into any issues after replacing the subframe? Or what kind of long-term issues you can encounter after doing this procedure? They're doing the same thing to my Genesis G80 since some idiot ran me off the road and caused me to hit the concrete around a storm sewer while going 40mph.

[@rayc-h8c]

732pm bx ny you got a vid on that for 09 honda Accord 2.4 I so hope you do Thank you

[@kryptologicalz8436]

If you didn’t have the engine support mount installed would the whole engine and tranny fall?

[@ninerbug]

I had the same curb problem but I still have the wheel turning to the right after an alignment and everything looks go but something is still off can I help can my rack and pinion got damaged when I hit the curb

[@RicardoLopez-rn1td]

Hi, I get crack driver side around box where motor mount rest, I want to weld the piece or IS better chance the frame ??.

[@Shameofoccupiers]

Changed Cross member on Hyundai Tucson 2007 and I have a problem when changing the gear box speed there is a noise like something hitting the car from the insight you fill a nock at the back of the car ? Can you tell me what is your opinion ?

[@bornoflove]

were there any bushings on the subframe?

[@rooster13436]

How long did it take you start to finish

[@Hibachipower]

I have 2013 TL ....few month ago I fill too much oil now my rear main is leak need to be reseal ..... is there when you can make a rear main seal video ..... ...... plzzzzz

[@CarsNToys]

Oh man what a bummer. I have something along those lines in terms of showing where the rear main seal is... kzbin.info/www/bejne/mZCVo6GdZ5ihmNU

[@orozcocris93]

so is there an alignment with these cars sub frame that needs to be done? i ask because i had no problems with it, had a rear main seal and rack and pinion done, then when i got it back and took it for an alignment, they told me the control arm was misaligned and they could not get it to go straight. Sub frame issue? or could the control arm really be the problem?

[@CarsNToys]

I had an alignment done after this job. Not sure why the lower control arm is misaligned. On this '06 the lower control arm is attached to the subframe at fixed points. Logically, this would mean the sub frame has issues. (As long as the vehicle was not involved in an accident.) Maybe check with another shop.

[@orozcocris93]

@@CarsNToys Thank you for the reply. yea I thought the same thing. Honestly i feel it might have been damaged during installation. the only thing i see wrong with the control arm is the forward bushing is ripped. I dont know how bad it is but it did look ripped. I will have it replaced and hope that is the only problem

[@TylerZuniga-mn6ob]

How do I take that black line off that connects to the transmission to release the cross member??

[@TylerZuniga-mn6ob]

I'm working on my Acura right now and that the part I'm stuck on this please help??!!lol

[@TylerZuniga-mn6ob]

It's the black line toward the back of the frame it shows in both parts but not how to remove or install it back

[@200horsepower]

Hey my 2007 tl the front driver side wheel is slightly displace to back, I more close to fender that the passenger side,now,how can I fix it? Can I loose all 4 bolts and try to get back in place,maybe bushing problems, need to help please!! Thanks

[@CarsNToys]

If you're lucky, it sounds like the lower control arm. Quite easy to replace. I plan on uploading a video soon showing how to on the Acura (along with lower ball joint replacement). I do have a video showing how to replace on a Subaru. It's similar. In my opinion the Acura is easier to work on. kzbin.info/www/bejne/fIilq4Cqj96Zjs0 The flip side is a good alignment shop will simply tell you what parts are bent.

[@200horsepower]

@@CarsNToys thanks,I will take the car to an alignment place so they can look at it, I saw the subframe is slightly displace, I guess from previous collision, I wonder if they can pulled to the original place

[@stevenwilson3135]

Was the shift linkage a problem when removing the frame

[@CarsNToys]

No issue. If I recall, it's one fastener.

[@sgt.hollowpoint6968]

Where are the "holding points" on a motor when using a engine support bar?

[@anthonytarin4576]

How much would a repair like this cost I have a similar problem with my 2008 acura tl when it went over the curb

[@CarsNToys]

Local shop quoted the previous owner $4k using used parts.

[@ccurrell]

@@CarsNToys How long did the job take you? Removal and installing the new sub frame?

[@johnjoya541]

Is that video god for a tsx sub frame

[@jessicawest9296]

How did you get it to line up

[@CarsNToys]

It was pretty easy. Very slowly used the floor jack to line up with the front and rear mounts, check the steering rack and transmission mounts.

[@stevenwilson3135]

Cant get the frame to drop without disconnecting the shift linkage

[@xavierrodriguez131]

I hit a sidewalk and the engine drop a little

[@444family3]

Very poorly made video . Dude literally skipped over half the under carriage bolts just so he could show the car starting up.

[@shlumpgod]

I need to see my car under a lift again but I BELIEVE that around the area where he installs the very first 4 subframe bolts (0:27) I have some type of leak and I remember a mechanic telling me that I should look into getting that fixed or else im gonna feel it while making turns 🤔 hope that is enough info to give you an idea of what I’m talking about