HOW TO INSTALL A MOTIV REFLEX ON YOUR B48/B58/S58 A90 Supra

[@sarahd2967]

Great context. You have helped and saved people a lot of time and money. Thanks

[@NguyenFamandChavez]

Hope boodmod3 come out with a board soon to do port injection

[@automotivelove]

what are the wire colors for CANBUS?

[@tommygspeed7192]

You made a comment about a plug and play version of the Motiv Reflex coming out later this year. Do you have a video going into more detail about this or could you provide more info? Thanks you! Great video!

[@kern417]

Not yet but i expect it to be similar to a piggy back. The harness will have plugs that split the OEM harness to send data to the dme and the reflex box at the same time instead of tapping wires. Think almost like a piggyback

[@thomasgarza6917]

@@kern417 great explanation. Thank you!

[@SniPeR7217]

If I have port injection installed already and motiv set up, can I just unplug the harness if I don’t want to run the PI and save fuel? I’m not liking how it drinks fuel.

[@kern417]

You need a tuned designed to run without PI

[@tlcnails2007]

Hi Buddy, I did the installation but the engine RPM not working which wires I need to check. Please let me know. Thank you

[@kern417]

check all the connections

[@tmak1606]

if you have the visconsti/5ive motive harness, you wont have to splice into the ecu right?

[@kern417]

If it's plug and play then you need to plug into all the sensors instead of the dme

[@tmak1606]

@@kern417 any idea if p3 gauges still work with motive, since both need the canbus

[@kern417]

Yes, p3 reads from the obd port

[@xThundersZ]

Hey bro! Once the Motiv Reflex is installed, can you start your car? Or you need to get a base map from your tuner first to start? Im asking because im waiting for mine and I dont have a garage, so if I install it, will I be able to move my car or no

[@kern417]

yes. it won't work until you flash a map to it so it doesn't interfere with anything.

[@fastshiftauto8941]

@@kern417 if I wanna run external waste gate what do I have to do to the dme to eliminate the error?

[@kern417]

@@fastshiftauto8941 tuner needs to disable it

[@fastshiftauto8941]

@@kern417 oooooooh I thought it was some that I could do to get it drivable

[@kern417]

@@fastshiftauto8941 i think in bm3 there's a checkbox but other than that you'll need a custom tune to disable it

[@samuelgrossman1205]

B58 Gen2 ...Just installed Reflex Plus but find the firmware update and loading maps and datalogging a bit confusing. How about making a video showing how to do all that. Thanks !!

[@kern417]

Coming soon. Sorry it has taken so long

[@the_batmobile0.4]

​@kern417 where's thw video?

[@kern417]

Still soon 🫣

[@tylerwhitley3604]

Isn't Viscontis kit fully plug and play. Working on the install now and I don't have to tap into anything on the ECU harness

[@kern417]

I believe so. This is the regular harness from motiv

[@miggeer8007]

Greetings, where can you get a tuner for motivreflexplus calibration.

[@kern417]

Any tuner can do it

[@sarahd2967]

Question- If you install port injection but you stay on pump 93 no added ethanol will you still get more power meaning Refex or MHD Flex fuel system will still add more pump gas through the port inflection? Or does it only work with ethanol E30 and above? Thanks

[@kern417]

port doesn't add power on it's own. if you are hitting the fuel limits they it can add additional fuel to keep turning up the power. if your'e not hitting the fuel limits of your car then it's not needed.

[@sarahd2967]

@@kern417 So I am stock Fuel pumps, stock turbo, the plan was to go with MHD Tune with Flex Fuel enabled and run pump 93 so was wondering if MHD would try add more 93 oct fuel through the port injection. Hope that makes sense.

[@kern417]

no it will not

[@sarahd2967]

@@kern417 Makes me wonder why MHD cannot with port injection leverage the port injection to add more fuel even on 93 pump gas instead of putting in a bigger higher flow fuel pump?

[@sarahd2967]

@@kern417 Question - 2018 540i xdrive M Sport Stock Car - To get 500-600hp would you just go with port injection E30 with MHD or stay on pump 93Oct and do upgrade turbo, HPFP and downpipe? Which is easier to do, cheaper, better for the car. This is a daily car and will use that much power occasionally. Thoughts.

[@tlcnails2007]

I’m new to this game😂 can we use ports injection with out upgrading the turbo.

[@kern417]

Sure

[@miggeer8007]

Greetings, I have reasons, it does not want to connect to the computer, nor does it activate the injectors, I have made all the adjustments and nothing positive.

[@kern417]

make sure your wiring is correct and all of the DME plugs are fully seated

[@miggeer8007]

what could happen if there was a cable from the motive to the dme was badly located

[@miggeer8007]

could be the reason why it does not connect

[@kern417]

@@miggeer8007 it would cause the issue that you're describing

[@michelhamwy2920]

I’ve tried to get 50% off

[@kern417]

The video is over a year old. You missed it.