Ahh yes watching people do the purge... and then not have enough to go down the track.
@TorqHub4 жыл бұрын
Dabbled in the nitrous with both a VS clubsport and BF XR8. Would love to spray a 300 shot in the VH SL/E eventually too 😈
@thekiltedveteran10 ай бұрын
This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!
@thekiltedveteran10 ай бұрын
... Also it is a P-71 Police Interceptor if that makes a difference.
@CharlesFarr-v2o26 күн бұрын
Yes I have on a bone stock 396 350 horse 1970 elco. SS with t.400 trans and 331 locking diff
@kabar123ar3 жыл бұрын
I’m Listening to him talk about staging lanes and drag race terms when I’m just tryna slap a wet kit on my 1.8l 4 banger😅
@markgilmore81366 күн бұрын
2ZR?
@TorqHub4 жыл бұрын
Big fan of the Nitrous Outlet products, and David Vasser seems to be a really great dude also. Some awesome innovations from that camp with the stinger series plates and nitrous puck.
@raulreveles62933 жыл бұрын
Should the bolts on the solinoids screw in all the way. Mines get pretty tight mid way or a little above half
@BroomysGarage3 жыл бұрын
Yeah the screw in all the way on the ones I have. There are different size and length screws, so maybe make sure they are the right ones.
@lukyduk3 ай бұрын
Hear me out, can u use galaxy gas for this lol
@alyssadurfee22473 ай бұрын
😂😂
@KustomWitha-K2 ай бұрын
I have a feeling we both watched the same video of a guys using galaxy gas on his car😂
@TurntT12 ай бұрын
yeah itll just run out fast
@suspend80653 күн бұрын
in theory yes i think whistlindiesel did smn like that
@justinmendez5957 Жыл бұрын
I’m looking into just show, is it possible for me just to set up the purge kit ? without having the nitrous shoot into my engine ?
@Holmesy894 жыл бұрын
Will this primarily be used as a power adder or to assist in getting the turbo up faster?
@BroomysGarage4 жыл бұрын
It will primarily be used to blow up my lawnmower. Secondary use I will think about later 😂
@josephfilms6103 ай бұрын
Does anyone have links to all the stuff in the video
@joshsutcliffe60993 жыл бұрын
What would be a good setup for my fuel injected vtwin
@ferdsan90259 ай бұрын
Nothing , if you want to go fast on a motorcycle..buy a sport bike. A Kawasaki z1000 will gap a nitrous Harley
@calebgodwin60222 жыл бұрын
So I have a pretty well built foxbody with a 347 stroker I’m wanting to put nitro on it do I have to buy a new intake or what do I need to do with that I’m new to nitrous not trying to spend 2k on a turbo kit for my car
@BroomysGarage2 жыл бұрын
Depends what intake you have on it now. Carby, efi ?
@calebgodwin60222 жыл бұрын
@@BroomysGarage no I have a cobra upper and lower intake
@BroomysGarage2 жыл бұрын
Check out their website. They may do a bolt on plate kit that sits behind the throttle body for that engine.
@tonysouza95462 жыл бұрын
Are the jets purchased separate?
@8hp70cris3 жыл бұрын
Do you have the link for this kit? I want to purchase it for my ram.
@BroomysGarage3 жыл бұрын
nitrousoutlet.com/i-30560029-universal-efi-single-nozzle-system.html this is basically the kit, with a purge system and a blanket added to it.
@jessehern912 жыл бұрын
Can i have a link for this exact kit?
@Anonymous_________3 жыл бұрын
The purple ZeX bottles are rated to 2500. I trust those better.
@kylewiese3023 жыл бұрын
How much would this all together cost and then how much are the individual cans
@cptn2stealurgrl5222 жыл бұрын
800 for the whole kit for what you need
@kylewiese3022 жыл бұрын
350 smallblock v8
@_wimza_79832 жыл бұрын
I own a chrysler 300c crd V6 diesel, its a dry nitrous system and injector is Pre intercooler. I have it going into the turbo downpipe. Is there a better place i can fit it do you think?
@joetroy29042 жыл бұрын
If you’re using it to spool the turbo that’s fine, if you’re using it as a main power adder it should be in the throttle body if possible.
@ekmikeymike18332 жыл бұрын
Thank you so much for this video💪🏼 Is this a full kit?
@godisoncod4752 жыл бұрын
I thought this was how to install a nos kit , not how to unbox one
@eddieshlips28714 жыл бұрын
How does this video have only 294 views after 3 days??? People are missing good content!
@thekiltedveteran10 ай бұрын
This is off topic, but my Crown Vic RPMs drop after the engine reaches regular temperature. When idling in drive at a stoplight, the car stalls. Replaced throttle body, sensors and air filter. This problem is probably like changing a tire for you guys, but hey, I'm asking the best 👌Thanks!
@silentscream187110 ай бұрын
I think its probably idle air control valve
@thekiltedveteran10 ай бұрын
@silentscream1871 thank you! I'll check it out.
@silentscream187110 ай бұрын
@@thekiltedveteran update me when you figure it out