How To Install a Roll Up Door and Framing Kit on a Shipping Container

[@fixingscreens7075]

Absolutely love the attention to detail explaining the installation. Especially on the roll up door, you can bet the manufacturers instructions dont even mention one half of what was mentioned in this video.

[@ltsgarage7780]

I have to ask. How much are these doors. This one and the end inside door & the outside mounted one? Where can I order them??

[@mmanut]

GREAT PRODUCT GUYS‼️‼️ Vinny 🇺🇸

[@HannahCrozier-sq6qr]

can you ship just the jams as a kit to australia love the ease and product as im in a wheelchair this is a must for me

[@labellemike]

Thanks! Great Video!

[@winchesterbrothers4621]

What about modifying entry door as entrance door by welding one side closed and removing hardware on other door and then finding or making a door mechanism to open and lock from inside and out like front door entry?

[@TheContainerGuyTV]

Container doors are usually quite stubborn to close and the leverage from the two door handles is typically required to compress the door gasket and have the doors seat properly. I'm not saying it's impossible but if it was inexpensive and easy, there would be a kit out there already.

[@terrypaice2839]

Great Video Thank you! What hardware is included with the door kits? If not provided, can you offer a list of hardware needed to complete the installation please. Screws, nuts, bolts, rivets, etc. Thank you!

[@dori1oakes]

My roll up door literally broke! It is the second time! I really hate them, would you please post a video how to swam it out for a regular house door?

[@RKBrumbelow]

Forgive my ignorance, but since there doesn’t seem to be a standardized method for joining two containers to create a double-wide unit, could four of these door openings be modified to support the centerline between the two containers? We’re exploring options and considering a method using the following materials: • Structural Steel: ASTM A36 or A500 • Columns: 4-inch x 4-inch square steel tubing with a 1/4-inch wall thickness • Beams: W10x30 steel I-beams (10-inch depth, 30 lbs/ft) • Footer Plate: 3-inch high, 1-inch thick steel plate running the length of the container (40 feet) Additionally, we’re thinking about welding a 1/4-inch plate to seal the containers at the bottom and sides, adding a U-channel at the top to divert water, snow, and ice, and spraying insulation into the gaps. Any thoughts or feedback on this approach?

[@katch24]

Nice looking product. Do you have Canadian distributors

[@TheContainerGuyTV]

Yep, check out containermodicationworld.com for our products. We're also located in Canada.

[@billlevassiur5891]

What size rivets do you use 3/16 or 1/4 ? Great video

[@TheContainerGuyTV]

3/16" is what we use. 1/4" are HUGE and hard on tools.

[@steve6992]

Where can I buy this specific door kit

[@respectall4551]

I just subscribed 👍

[@angelrodriguez3521]

are the side pieces custom? can you show how it's made?

[@carolfitzsimmons-bc1ru]

Live long island where can I hire someone to do roll up or the other door.. Thanks, Carol

[@patrickbass3542]

Smart!!!!

[@TheContainerGuyTV]

Thank you. The kits work very well.

[@likeshisrye]

do you have a link where I can get a roll op door in Canada? Thanks

[@MrBigleo25]

can u do a 16' door

[@carolfitzsimmons-bc1ru]

what is the price to do a roll up door..or should I hire someone and where do I do that... Thanks,Carol

[@Bunkerma]

Do you sale the kits for side door

[@quevicular]

Where to go. How to buy. What who where when why? Full purchase kit on amazon??

[@andreykichuk]

Where do I buy the doors, I have two 9’6” that I want to install side doors, I was thinking you are selling them?

[@BobMcNutt-m4m]

Near Cambridge OH I need help to install some type of door into a 40 ft HC container. Could be a roll up door or an Agricultural slider door for farm equipment. any one I can contact to get help?

[@ltsgarage7780]

Do you make a roll up door to replace the end swing mounted doors?? My containers are standard height and width & 40 foot long. With The swing doors you must keep everything clear of the end doors. Cost of your end mount roll up doors I have 2, 40 footers now !

[@TheContainerGuyTV]

Hello. We have finally released the video on this. We can either install the exterior mounted roll shutter door or interior mounted roll up door. See here: kzbin.info/www/bejne/qZm3Xn9tgah0qpI

[@michaeljenkins5421]

do the garage roller door comes in a kit... and how much?

[@Integritypavingllc]

Where do I buy this tool up door kit?

[@TheContainerGuyTV]

Hi Jesse. This kit is developed by us in-house. You can fill out the Request A Quote form on our website at www.tcg.ca and that should give us enough information to provide you an estimate on the kit.

[@angelrodriguez3521]

do you sell kits?

[@earthstrongfrontier5576]

What metal is used for the structural frame part? What are the dimensions?

[@leoemond9973]

how much would the kit be to purchase?

[@scottd7615]

Where can i buy the framing kit for a side mount roll up door?

[@TheContainerGuyTV]

We have them in stock at our Saskatoon, SK location

[@justinlarson4959]

Are these kits available anywhere in the states?

[@manstir]

hi, Question, if we do insulation heat paint on the outside container (not inside), how long it will last? tq

[@TheContainerGuyTV]

Are you talking about that ceramic stuff? It's the same price as spray foam with no R-Value and no added structural integrity so it isn't worth it. I don't know how long it will last.

[@manstir]

@@TheContainerGuyTV ok tq

[@Mail4marc]

I wish the presenter would have shown how he laid out the installation of the latch.

[@TheContainerGuyTV]

The latch comes attached to the door from the manufacturer and there is a slot for it in the slide rails.

[@StrifeA217]

Where can I buy the roll up door and frame kit? This was exactly what I was looking for and would like to get my hands on one or two.

[@TheContainerGuyTV]

Hello, we stock these at a couple of our locations (www.tcg.ca). Where are you located? Depending on your whereabouts, it might be feasible to ship. The framing kit without the door can be packaged decently in a box and shipped parcel shipment if you can order a roll up door that fits locally. Janus International is a great supplier in USA.

[@frankieelder3210]

The Container Guy very good, a consistent tutorial………thank you!

[@thecouragetogrowshow]

Where would I find this kit at?

[@levismith8]

Link for kit?

[@adagre]

Sell these kits to people in Ontario?

[@danielvalcourt8728]

Can anybody tell me how to convert a reefer container into a druit dryer dehydrator?

[@stefanoferri1485]

Can i convert my regular door on the container to a roll up door?

[@TheContainerGuyTV]

Yes, you can. We will have a video out shortly on this. You will need to install a header and side frames to mount the RUD tracks. A person is better off to install a roll up door on the end wall rather than replace their doors if they are still sealed and lockable.

[@TheContainerGuyTV]

kzbin.info/www/bejne/qZm3Xn9tgah0qpI

[@puntacanaman1]

I need the finish brush edge kit. I can't find them anywhere.

[@TheContainerGuyTV]

Hi Andrew. We were backordered forever on brush seal but finally received another order and could sell you some. Heads up - pricing has gone crazy on that stuff.

[@puntacanaman1]

@@TheContainerGuyTV Thanks for the reply. I can't find them on the TCG website. Am I missing them somehow or are they not listed?

[@TheContainerGuyTV]

Hi Andrew. You'll have to email a request through the website. We don't typically sell the brush individually. It's usually a component in our Roll Up Door assembly. Please provide your shipping address in your quote request.

[@puntacanaman1]

@@TheContainerGuyTV Thank you!

[@TEKNO4wd]

Andrew look at action industries they have all the brush and retainer

[@christianosaulo4779]

HOW MUCH FOR RESTAURANT CONTAINER$$???

[@dirtyd9792]

What is the price for a roll door like that one and where can I buy one for my container ? Thank you i am now a subscriber to your channel.

[@TheContainerGuyTV]

Thanks. Please email [e-mail]

[@winchesterbrothers4621]

Why can’t u remove the entry doors and install this roll up here I guess it’s not sized to fit there?

[@JohnODonovan1]

Are you sure that you are not from northern Ireland, could have fooled me😀

[@aaroninks]

The rivet gun is your weak link. Time to step up to a Huck gun…

[@TheContainerGuyTV]

Thanks for sharing. I agree. I don't like how the center of the rivet punches out sometimes. Do you suggest using their blind fasteners for our application? Or just their gun?

[@adamwilliams8784]

You should have just rolled the door twice before bringing it in the guide then your tension is already set! I'm literally doing this right now as I'm watching your video.

[@adamwilliams8784]

I've done thousands of sheet doors!

[@TheContainerGuyTV]

Interesting. Which direction? When looking at the tensioner side?

[@soulsurfer4441]

I don't see why you have to wear a shirt

[@frankabella7489]

Where can I purchase a roll up garage door?