"How-to Install Automatic Bilge Pump" Super Easy and Cheap!

If you do not have an automatic bilge pump in your boat? I suggest you invest in one. My old boat sank overnight at our dock. I learned a valuable lesson. I like these Johnson pumps and the cool thing about them is you can just change the cartridge to change the GPH. Its worth every penny! Ill attach the link for the one I used in this video! Thanks for watching. I hope this helps.
Johnson Pumps 05503-00 12V 500... www.amazon.com/dp/B005BTAVD6?...
Support me and rep trickedtins merch 👇
www.trickedtins.net
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brother's company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/
Tricked Tins Crew 👇
DruYoder with Yoder boats.
www.Facebook.com/yoderboats
yoderboats?igsh...
Casey Bass With C bass welding.
/ @cbasswelding
/ cbasswelding
Simeon Terrell aka Sham4reel
/ @sham4reel764
sham4reel?igshi...

[@cramos6638]

I almost sank my boat on the first day of my vacation. The old " i put it in the wrong hole" it didn't click in my head why my automatic bilge pump would not stop pumping out water out of the side of my boat 🚢. Thank God I put on a automatic bilge put. It really saved my boat from sinking till I jumped in the water to put my plug in the wright hole 🕳️🤷

[@TRICKEDTINS]

Jeez. Glad it wasn't worse. My uncle did the same thing a couple months ago.

[@Everydayfishing]

Nice job - for your next project, it might be a good idea to install a fuse box or bus bar to consolidate all those wires running to your starting battery. You can even put it somewhere really accessible up front, and then run a main positive and negative back to your battery. Definitely helps keep things organized!

[@TRICKEDTINS]

I always install fuseblocks and switch panels in my builds. It looks like a lot of wires, but it's not that many. They are all for my graphs and the black box. They have to run directly to the battery. I dont want to get interference

[@BrokeBackBob4559]

I run two 800 gallon per hour pumps in my boat both are on dual setup. Never hurts to have more pump power in a emergency

[@c.shoefish]

Absolutely. I have an installed 1100 gph but I also have an oh shit pump, it's a 1500 gph with alligator clips that I can just drop in and pump overboard

[@charlesbrown1587]

I always replace bilge pumps with the 1100gph. I like to think it will give me a better chance to get back to shore if the boat starts taking on water.

[@TRICKEDTINS]

Not a bad theory

[@TheGsellers]

Nice! if I had one of those I wouldn't have to fix the leak in my boat. lol

[@TRICKEDTINS]

Hahaha, might still want to address the leak?

[@c.shoefish]

Bro...why do you alwyas say bilage?😂 It's bilge... Just giving you crap, I always get a kick out of it. Cool video bro, keep up the great content.

[@TRICKEDTINS]

Idk its just habbit

[@mattaneshansley5349]

I prefer to hook the battery wire to the ignition so the bilge pump doesn't activate accidentally and drain the battery, but I also don't leave my boat in the water overnight.

[@TRICKEDTINS]

Yeah, sometimes this boat sits in the water for 5-7 days at Lake Gaston.

[@williamcadou]

This guy deserves so many more subscribers:)

[@TRICKEDTINS]

Thanks brotha

[@nickstojanovic8868]

I have the exact same pump that I want to install however I was assuming that the base that you pop the cartridge into is screwed into the mounting plate on my lund. Nope its riveted. WTF. Why would they rivet a totally removable and replaceable bilge pump?

[@TRICKEDTINS]

The housing doesn't have to be removed. Only the cartridge!

[@FamasFTW98]

can i wire the the negative wire and the automatic wire straight to the battery and leave the manual wire un-wired

[@TRICKEDTINS]

Yes. Test the float tho and make sure the pump comes on when you lift it

[@FamasFTW98]

@@TRICKEDTINS do i need to install a inline fuse or will it be ok without one ?

[@Blueladderpainting]

What’s a Billedge pump? Billedge like Village? Lol!! Sorry man. But just as an FYI, people will tend to take you seriously when you pronounce the part correctly. Just a Bilge pump.

[@TRICKEDTINS]

Thanks for being an A-hole 😆 I'm pretty sure it's not that serious

[@blushbunnys4148]

Did not dawn on you at all that maybe you should show actually removing the old pump? Good grief.

[@TRICKEDTINS]

Hahaha, sorry, i didn't realize how dumb some people are, lol