HOW TO INSTALL INNOFADER PNP ON THE RANE 72 / 70 REVIEW VIDEO

******UPDATE READ HERE** IN ABLE FOR THE FIRMWARE 1.5.5 TO WORK WITH THE INNOFADER YOU NEED AN UPDATED BOARD FROM INNOFADER WHICH THEY CAN SEND FOR FREE SIMPLY CONTACT [e-mail] BY SENDING YOUR ADDRESS******
Instructions also work with the Rane Seventy, all you need is the updated version of Innofader pnp2 for Rane Seventy/Seventy Two.
How to install the innofader PNP2 on the Rane 72 and review video. I decided to make a thorough video of the new features the innofader PNP2 provides for the Rane Seventy Two. It's quite a long video so I've made links in the bottom of this description to cut straight to the install.
This fader is the lamborghini of faders! Get yourself one if you are having issues with the Mag3 fader.
Order PNP2: www.innofader.com/products.php...
Jump to specific parts of the video:
0:00 Intro
4:44 Curve Adjustment
7:32 Cables
8:31 Angle Bracket
9:46 Extension Fader Stem
13:35 Install to Mixer
14:02 Test Mode
14:40 Go Mode
15:42 Reverse/Rotate Setting
16:51 Calibrate
18:20 Install to mixer
20:47 Recommended Cut in settings
21:46 Review
24:23 First impression

[@RobertFreiberger]

Thanks for this video, I was having issues with the 72 fader, lubed worked a bit and backing out the set screw but after trying my Z2 with Innofader, I knew there was another way. Good to hear this is drop in vs having to hack around the mixer board.

[@djbuddy]

Great job bro. Step by step with explanations and no fluff.

[@ThaSkareflow]

I just ordered an innofader for my Seventy-Two MKII and I'm excited to get that nostalgia from the clicks on the crossfade. Reminds me of when I use to own a Vestax

[@djcaliente]

Hey Taylor... How is the innofader for the 72? Does it click like a Pioneer fader or Vestax fader?

[@jeffweez]

Thank you for this tutorial! I was getting stressed and overwhelmed by another tutorial that left out a lot of steps and details. Yours had more information and cleared up some questions I had. The Innofader is installed properly in my Rane 70 and such an improvement over the stock fader.

[@djcaliente]

Hey Jeff... How is the innofader for the 72? Does it click like a Pioneer fader or Vestax fader?

[@jeffweez]

@@djcaliente The last Vestax I used was ancient, so I can't really speak to that. I have a Pioneer DJM-S11 and I love the Magvel Fader Pro on that - it's quiet and quick. The Innofader on the Rane 70 has much louder clicks but aside from that the performance is nice.

[@djcaliente]

@@jeffweez thanks… I hate the Rane 72 quietness and plastic feel. I am looking to get something more close to the Mag feel and I think this is my only option.

[@ozzlikemike]

This helped me greatly - thanks dude‼️

[@gamingheadztvMediaHeadztv]

Your video helped me with my ns7 mk1 thank you 😊 🙏 I didn't what do do with the button

[@sinetwo]

Great video. Good to know about all this before going for an innofader.

[@kkpropertysolutions3785]

I can’t believe that you need to upgrade crosfader in 2000 💵 mixer🤦

[@danizm78]

exactly man its a joke.

[@djsupafly1]

It's a worthy upgrade. People upgrade their cars......why can't we do it in mixers?

[@krolkoolmarek7074]

Great i will try soon ❤🤞🤞

[@DeafSwitch]

thanks for the help 👍👌

[@DK-ys9yn]

Thanks for the vid made installation a doddle

[@nickl1430]

Thank you so much for this video! The instructions that came in the box are pretty confusing -- it would have taken me hours to install my Pnp2 in my Rane 70 without your help. Just a heads up that the calibration instructions you gave are slightly different than the manual and label on the fader -- those say to pull the fader left, right, then left again. Also wanted to say I ended up reusing the screws that held in the MagFour when installing the Innofader, and they seem to work just fine.

[@djcaliente]

Hey Nick... How is the innofader for the 72? Does it click like a Pioneer fader or Vestax fader?

[@djmarzek]

YO! great video! thanks! ...also where did you get your blue fader caps ?

[@djsupafly1]

Chroma caps

[@djcaliente]

Thanks for the vid. Do the mixer built-in curve knobs change the way InnoFader cuts? Or the only way to do that is by taking the mixer apart and using screws?

[@Shmack_]

Every make a follow up video using this? I'm debating on putting this in my 72 mk2 and see how the difference is compared to the mag four. I'm also considering trying the infinity fader.

[@danielbutler2969]

i bought three innofaders PNP's...is installation of the upfaders the same minus the bracket and im assuming its possible to have all 3 installed simultaneously too correct??? No known conflicts right? thank you for taking the time to make the video and for making it pretty simple to follow for a guy like me who has very little skill in this dept.

[@WidSidDj]

I bought this crossfader for my Rane 72, tested it for a month, set it up every way possible, and honestly I was not satisfied. My biggest problem with the original 72 cross fader was the cut in which was way too big and indeed the pnp 2 solved this problem. On the other hand, I don't like the feeling at all, despite the possible adjustment of the tension that I set to the minimum, the pnp 2 seems to me much too heavy (worse than the mag 3), I didn't hear any click effect when I scratched (more like a plastic noise) and some of the cuts weren't audible at certain times. I finally reinstalled the mag 3, adjusted the tension screw so that the cross fader falls off by itself when the table is tilted and added a small rubber ring on each side of the cross fader slide bar to have a shorter cut in and frankly it's waaaaay much better now... This is only my personal experience and I may have had a faulty pnp 2. In any case do not put all your hopes in this crossfader. Innofaders are good products, but this one felt wrong on the 72… Thank you for this video by the way, it really helped me

[@hardkore360]

FYI, i just watched a Rane video which shows the rubber o-rings being part of the factory assembly. They are there to dampen the fader click and to create a buffer zone.

[@WidSidDj]

Exactly, and by adding another one you can actually reduce the cut-in 😉

[@explorer2sea]

It Rocks!!!! What a different.....

[@djsupafly1]

explorer2sea yes innofader works great

[@cueyork8179]

Will this innofader work with the Rane 70 as well ?. Or does the 70 have a particular model?

[@OneBadAssDJ]

I never had good luck with the Innofader curve adjustment.

[@djsupafly1]

OneCrazyDJ the curve adjustment is made within the rane 72 settings......not on the innofader knobs.

[@ThaSkareflow]

What's the tool that you use to adjust the extra stem screws?

[@TheSoularius]

Does the reverse switch on the front of the mixer still work?

[@WazzyTV]

can you a review on the pnp3

[@sinetwo]

Also is that non phixion? 90s instrumentals 😍

[@marki3m3llo]

Yo whas good Dj I have a question... which innofader do I need for the Rane 70? Would it be the PNP2 as well ?

[@ozzlikemike]

Ya you need the PNP designed for the 70/72 👉🏾 www.innofader.com/products.php?id=34

[@OutNAbout415]

You made me decide to change those cheap ass faders on the 72. I thought I only had the problem with the faders!

[@djsupafly1]

CityBoyz415 awesome!

[@ajohnstitch]

Just fited mine sooooo much better the difference is night and day. Thanks for vid just need to replace other two as and when.

[@zakdee2732]

I just got 72 mk2 but mag4 is still not as good as the pnp2, seriously considering replacing it. Can't believe mixers at the top end cant match xfaders and customisation from the pioneer 707 or 909. Why is the cut in only in 1mm steps in rane? Unbelievable. Fucks sake the reverse switches are tiny, sucks as i need to go back and forth between hamster and normal mode. Anyone got the s11 and still needs to change xfader?

[@danielbutler2969]

Has anyone encountered an error saying no mag level 4 fader right when you turn on the mixer? I followed the steps verbatim. Hope I didn't do anything permanent to mess this thing up ughhhh

[@ThaSkareflow]

Can you use the Rane 72/70 innofader to replace the channel faders as well as the crossfader?

[@djsupafly1]

Yes! you can have 3 innofaders installed

[@ThaSkareflow]

@@djsupafly1 awesome, just wanted to play safe.... It's probably better I buy 3 of them and not have to buy a Pioneer DJM S11 SE as a backup

[@prestoernesto2280]

Hey...I thought the 72 has a really good crossfader? Whats the difference compared to the Innofader pnp2?

[@djsupafly1]

Presto Ernesto the innofader is much more precise and buttery.

[@karlousdavis8227]

Where did you get your skins from and is it magnetic?

[@djsupafly1]

Karlous Davis 12inchskins and yes it is magnetic.

[@marki3m3llo]

Hey fam, which innofader do i need for the Rane 70....would it be the same one you are using here, the PNP jawn?

[@djsupafly1]

Yessir. www.innofader.com/products.php?id=34

[@Subtitle_art]

Illlll BIIIIIIILLLLL !!!! I have a question, why don't setup the tension screw on the OEM Fader? or change the carrier with an infinity fader?

[@djsupafly1]

anyzuka the tension screw is not as precise as the innofader. Infinity fader is just a stem not an actual fader board. The cut in time on the oem fader is not very precise like I'm used to on the old faders.

[@Subtitle_art]

@@djsupafly1 Hummm ok. And I plan to buy this mixer but I'm a guy who love to be able to setup sharp his faders. So if you can it is possible to you tell me the minimum cut in lag that the 72 has please?Thanks

[@djsupafly1]

anyzuka it's like 2-3mm. The innofader is 0.2mm. Big difference.

[@Subtitle_art]

@@djsupafly1 Whaaat, seriously? Naaaa it really suck because I like to setup my cut in lag like to...0.8-1mm but It's horrible with 2-3mm minimum. I like the rane build or the option with the pad and midi but for the fader I think I will go for an s9.... Thanks for the answer dude ;)

[@djsupafly1]

anyzuka yeah I do like the s9 fader and the curve it has. The innofader got it's to be close to that.

[@Derfmurc]

dope fader but the screws are to heavy... need to exchange them to lighter ones.

[@djsupafly1]

DJ CRUM I don't notice the difference. Still seems very light and smooth.

[@djgroovefella1360]

My rane 72 does not recognize this crossfader when I turn on the mixer, an error message appears on the touch screen. Anyone know why?

[@djsupafly1]

DJ SINU did a cable become disconnected? I've seen that error whenever a cable isn't properly attached.

[@djgroovefella1360]

@@djsupafly1I've connected it just like you did in the video, many times. And I still have the same problem, it is the second time that audioinnovate sends me the pnp2 for rane and I can't find a solution.

[@djgroovefella1360]

Solve the problem, I just had to download the latest firmware.

[@djwurlwind3895]

Will all PnP2 faders work with the Rane 72? Or does it have to be a specific 72 PNP2 fader ?

[@djsupafly1]

Ryan Arthur there's adapters that are needed.