How to convert non turbo to turbo diesel. Non turbo to turbo charge conversion complete video.
Пікірлер: 348
@volvoripr99803 жыл бұрын
I love how everyone works together and efficiently like doctors doing a surgical procedure.. great job guys
@PakistaniTrucker3 жыл бұрын
Thank you so much 😍❤️🇵🇰
@chriscs90803 жыл бұрын
They all work together so noone will take the blame when it does not work or it blows off haha
@samsungsungsam54743 жыл бұрын
@@chriscs9080 no they work together as brother
@GenuineNPC3 жыл бұрын
They ARE doctors doing a surgical procedure. Car doctors. (I've heard people call them mechanics, but I like mine better.)
@shanuyadav72733 жыл бұрын
Unlike in western countries where theyll charge a ton and would keep ya vehicle for a week or two.
@captainr.88823 жыл бұрын
These men are truly impressive. The amount of work they get done with a limited amount of tools is incredible. THIS IS SELF RELIANCE!
@sairabshah3 жыл бұрын
Modern day A-team
@paulcarlsen40883 жыл бұрын
Removing fasteners from an exhaust system is the same in all cultures-very difficult😂👍
@adamtheede25753 жыл бұрын
True words
@anaskhalaf52103 жыл бұрын
Just imagine giving these guys some Milwaukee cordless tools .....life changing for them. Good job 👏 👍 👌 🙌
@Hbn1823 жыл бұрын
With some nice flex 1/2 flexible sockets and a digital Torque Wrench🔧
@DeanieBN543 жыл бұрын
Practical, but some prefer to use those tools, especially after you’ve been using them for your entire life.
@pmp13373 жыл бұрын
And where would they charge them?
@mianhaafi22512 жыл бұрын
@@pmp1337 at the workshop definitely , its not stone age lol
@user-jt3nf7in5w3 жыл бұрын
Let’s get this guy some more tools and see what he can really do - this guy is amazing
@nsalcedo223 жыл бұрын
Most all these videos show master and apprentice. Pretty cool to watch.
@PakistaniTrucker3 жыл бұрын
😍❤️
@micbad46893 жыл бұрын
Customer: what about torque specs? Mechanic: I wiped my ass with them.
@jaskarankhosa81573 жыл бұрын
Bro I don’t think I will ever complain about not having enough tools after seeing this…I feel like a pussy using fancy tools now
@Driftwhinelime3 жыл бұрын
😂😂😂😂
@chriscs90803 жыл бұрын
Tools make the job easier and spend less time
@hondalude893 жыл бұрын
My thoughts exactly! Lol
@Ericrm793 жыл бұрын
You need special tools that turbo will not get a lot of miles out of it. It will work for a little while but it will fail sooner then later
@Ericrm793 жыл бұрын
It's not torque to spec
@the2060ish3 жыл бұрын
No power tools old school.. Down and dirty good work..
@gsent563 жыл бұрын
Man, how are they repairing an entire truck with common hand tools? While I'm struggling to do a coolant flush in my car
@PakistaniTrucker3 жыл бұрын
😍❤️
@doughouston47413 жыл бұрын
Good Job. Nice to see Mechanics using a work bench and vise. Not crawling around in dirt.
@gurindersingh81093 жыл бұрын
You are right. Work bench is must for higher productivity.
@e30maniak3 жыл бұрын
It was so nice to watch it, good job made without nice garage and special tools - just pure mechanics❤ greetings from Poland
@PakistaniTrucker3 жыл бұрын
Thank you so much 😍❤️🇵🇰
@johanordonez6998 Жыл бұрын
It’s fascinating to see these smart mechanics figuring things out! Nothing but respect, love and admiration.
@PakistaniTrucker Жыл бұрын
Thanks ❤️❤️
@mirzaosmanovic54303 жыл бұрын
we need more videos like this, more remakes like this
@PakistaniTrucker3 жыл бұрын
😍❤️👍
@fredorico413 жыл бұрын
It's always very Important to have a chicken 🐓 safety inspector overseeing the job 🇦🇺👍
@xspower88993 жыл бұрын
Gotta have the head rooster
@ForeverEuroHouse3 жыл бұрын
No intercooler, no turbo lag 👍 hard work
@ariftorunoglu16913 жыл бұрын
No intercooler , yes high intake air temperature
@kartavyasingh86433 жыл бұрын
@@ariftorunoglu1691 after a new turbo they soon come back for a new engine 🌝 building loyal customer base even if you don't like it
@muhammadhanifkurnaen66893 жыл бұрын
Low boost aplication still ok for the engine. Its commonly found on low tier emission standard (euro 2 or below). Just adjust fuel to air ratio using turbo compensator mechanics Another engine that this way is isuzu 4HG1-T wich still in production in our country.
@faridmiah773 жыл бұрын
Kids in the UK perfecting their killstreak on COD and you got kids in Pakistan building turbos to fit on trucks. I have admiration for those kids... Bravo 👌🏽
@PakistaniTrucker3 жыл бұрын
Thank you ❤️❤️
@patrickstevens77863 жыл бұрын
When the rooster crows. it's "break time"!!!!!!
@giggitygiggitygoofg60693 жыл бұрын
Imagine wot these guys could do in a real fab garage. Well done,
@skkserkan3 жыл бұрын
Install that turbo on a Toyota Aygo 😂
@FailofWar1273 жыл бұрын
Really cool to see, although that 90* angle piping on the compressor side hurts to see, horrible for airflow lol
@germanico44013 жыл бұрын
SON TALENTOSOS ESTOS MAESTROS PAQUISTANIES......UN SALUDO DESDE CHILE....2021.........JULIO............
@susanthrapp61543 жыл бұрын
Is it me or is the new turbo alot bigger than the old one 🤔 and I counted 4 solid grunts tightening those bolts so if my metrics are right a 145ft lbs of torque
@kortrijk0563 жыл бұрын
its a conversion from no turbo to turbo
@cumbob3 жыл бұрын
Who's needs a balanced turbo 😂
@AutomotiveDysfunction2 жыл бұрын
In USA oSHA would be pissed 😂 anyway great job guys love watching this
@PakistaniTrucker2 жыл бұрын
👍😂
@xspower88993 жыл бұрын
Love the ole school torque specs,PFT Pretty Fucking Tight
@boostjunkie23203 жыл бұрын
Very impressive. Nothing but respect for these guy's. I could use your help on my car. The dealership and another shop only made it worse for $2k U.S. dollar's
@sharewithraj3 жыл бұрын
How many miles will these turbos last? They are not balanced and they are pretty big..
@supertreme55593 жыл бұрын
Dont need to be balanced. Its complete ballbearing kit and they mount it together. These tuebos are pretty big but they dont run at 100% so they would probably last like 150k km
@ramonluftgekuhltdx6313 жыл бұрын
Big engine= Big Turbo
@LastChanceHomie2 жыл бұрын
PAKISTAN #1 Real Mechanics!
@tommygreist95603 жыл бұрын
Pass the man some WD-40.
@MuhammadFaisal-vm5oz3 жыл бұрын
Its more expensive than a labor charge per day
@tommygreist95603 жыл бұрын
@@MuhammadFaisal-vm5oz Man.....I would mix oil and Diesel and put it in a spray bottle. It will make disassembly allot easier.
@abubakarmalik9453 жыл бұрын
@@MuhammadFaisal-vm5oz are u crazy how much its cost ?hhmm
@barbosa_tnt3 жыл бұрын
Smooth turns are required in the turbo booster system. Sharp corners cause a vortex and prevent the correct air pressure in the combustion chamber, significantly degrading engine performance.
@АлексейБалабатько3 жыл бұрын
Герметик сила!! Нужно на красный герметик все сажать, а провода синей изолентой мотать!
@WW-by2cs3 жыл бұрын
Там резиновые кольца красные умник
@АлексейБалабатько3 жыл бұрын
@@WW-by2cs если ты не знаешь о чем я подумал, зачем ты высказываешь свои мысли в слух! Для общего развития объясняю! Это был сарказм!!
@granturismosportchanellive10083 жыл бұрын
это не герметик умник)это цемент для выхлопа!
@oldman74523 жыл бұрын
A group of talented mechanics. Excellent work as a team.
@3017601473 жыл бұрын
Los Admiro . Todos los trabajos lo hacen con mucho profesionalismo. Saludos desde Costa Rica.
@surge45193 жыл бұрын
After building turbo they high five,shoot Ak's in the air.
@PakistaniTrucker3 жыл бұрын
😂
@kortrijk0563 жыл бұрын
sounds like either in attock or further towards nowshera
@PakistaniTrucker3 жыл бұрын
In Rawalpindi, mechanics from Attock & KPK 😊👍
@MKVB2203 жыл бұрын
У нас недели уходят на правильное сочетание, а у вас один человек на стоящем под оборотами мотором. У вас господин волшебная Тюбетейка.
@raybin68733 жыл бұрын
Rooster crowing in the background... 😄
@bruehlt3 жыл бұрын
I wouldn't want to stand next to that thing when it spools up, if you didn't balance it!
@raybin68733 жыл бұрын
It's a small one....
@zorans52003 жыл бұрын
@@raybin6873 it doesn't matter.. a turbo charger spools up to RPM'S in the range of 100,000 to 500,000 RPM'S. If not balanced properly things can go very wrong
@sudhanshushekhar94983 жыл бұрын
Even its not efficient as there is no intercooler for the turbo just dumping hot air in engine
@pj31613 жыл бұрын
If it’s tight it’s aight 😂😂💀
@martymcfly23252 жыл бұрын
When you install a turbo more air comes inside the combustion chamber, you need more fuel to compensate it, I suppose you moved the fuel pump too, right?
@HARDMAN9993 жыл бұрын
12:04 sounds like there's a radioactive geiger counter 😶
@sairabshah3 жыл бұрын
Pa Khair ustaza, well done, good job, all is well. Leeds UK
@AhmadAliKohi3 жыл бұрын
I gotta say something that installing a turbo on na means more air and you should install bigger injector and tune the ecu if it has one
@shahrozalijafri88163 жыл бұрын
Iss mein diesel pump hai ecu nahi hota
@driveryte3 жыл бұрын
Ali bahi. You thinking like a ghora, yes Pakistan hai, jalay gha
@e30maniak3 жыл бұрын
There is mechanical pump for fuel so i think they made some tuning with screwdriver🤣 old diesel hasnt got ecu or else...i had old diesel 1.9 td im my small vw transporter t3, i gave him more air from turbo and gain fuel with screwdriver, instal intercooler, ive make 100hp from original 75 ...but after 3000km ..little bum and engine blow off😅 too old for racing🤣
@Nali27722 жыл бұрын
💚Zabardast Videos 👌 Best Recording on KZbin
@PakistaniTrucker2 жыл бұрын
❤️❤️
@junesmotorworx3 жыл бұрын
Regular RTV on exhaust side..... And no intercooler on long haul truck..... impressive...!
@CxJason3 жыл бұрын
Much respect for what you guys do. I wish the best for you all. 🙏
@PakistaniTrucker3 жыл бұрын
😍❤️❤️
@gilbertoantoniodealmeida9543 жыл бұрын
I learn lot from you. Congratulations
@AbdulRaheem-vw3ux3 жыл бұрын
Bruhhh pakistani truck is on fire 🔥 Turbo does it sound like soooooooo stustututututu
@jayaseafarerandatrucklover27892 жыл бұрын
Can i ask sir??why they remove the enjection pump is there any changes in fuel system to be adjust or to be change when installing a turbo to a non turbo engine??
@dantew67083 жыл бұрын
are you guys against power tools
@ChristopherMundahl3 жыл бұрын
Cool channel, just subscribed. Thanks for sharing!
@DougCanney13 жыл бұрын
I feel like one of them has to have a torque wrench.
@jaskarankhosa81573 жыл бұрын
Built in torque wrenches called arms
@pramudithad3 жыл бұрын
In Sri Lanka some mechanics install turbos for TD27, TD42 and 3L engines
@turbomac51953 жыл бұрын
Love this channel from England 👊🏿
@PakistaniTrucker3 жыл бұрын
Thank You so much ❤️️❤️️
@TheMobileTrucker3 жыл бұрын
Simply amazing!! Great video, keep up the good work.
@rdtkhokhar21133 жыл бұрын
Very good job sir 👍🏻👍🏻👌🚜🙏🏼❤️
@PakistaniTrucker3 жыл бұрын
😍❤️🇵🇰
@АлександрМарчук-н8ы2 жыл бұрын
Трубку масло подачи затянул без прокачки и ключ на старт, по ходу скоро вернется) Оцените как изящно подведена трубка охлаждающей жидкости 14:53, трубка как и амортизаторы жестко приколхожены)
@DiceFarrugia28 күн бұрын
Where did you purchase this turbo kit from?
@GoVIT4L3 жыл бұрын
Smart hard worker people
@descrewface44933 жыл бұрын
Apparently turbo CHRA's do not need to be balanced at all in India. 🤷♂️🤷♂️ Wonder how long that turbo will actually last?
@volvoripr99803 жыл бұрын
I rebuild my turbo 4 years ago no balanced.. still pushing great boost .. sometimes just need to work with whats available
@bilalasghar75033 жыл бұрын
Its not india its pakistan actually 😅
@benson76003 жыл бұрын
No need for intercooler? awesome work.
@MrDan196973 жыл бұрын
Việt Nam xin chào, các bạn thật là Pro khi tôi xem video của các bạn tôi nhận thấy một diều là các bạn quá giỏi
@ravington6663 жыл бұрын
Wonder what Nick from Bad Obsession Motorsport opinion be on this conversion......
@emmams53 жыл бұрын
He definitely would've made a lot more brackets and took 10 times longer than these guys to do the build.
@ajaychoudhary98173 жыл бұрын
very good video
@learnousmodificatex3493 жыл бұрын
Bahi is sa chota size ka turbo kitna tk mil jay ga? Jis ka runner repair b ho skta ho?
@Milo-mc6dd3 жыл бұрын
So did they tune it or just slap a turbo on it and call it good?
@turboty69673 жыл бұрын
they did add more fuel at the injection pump
@josephmcgowan44363 жыл бұрын
Where can We get Twins that size😁
@shadymf3 жыл бұрын
You think these guys constantly lose their 10mm too? Seriously amazing to watch these guys work with limited tool sets.
@sawomirbanach76663 жыл бұрын
When you change oil?
@coralcoral77063 жыл бұрын
hi, thanks for your video !!!!! How long does a turbine travel without balancing?Boris Ukraine
@craigr3063 жыл бұрын
i love how he balanced the turbo
@Evibean173 жыл бұрын
Was thinking the same thing… lol
@nsn2vu3 жыл бұрын
Lol
@khalidmanzoor68423 жыл бұрын
Are you talking about 14:22?
@aniqtwolimbs3 жыл бұрын
Loving that chicken sound.
@MechanicTechnicianRepair3 жыл бұрын
Experience trabado. Amigo de pais eres
@amminabdullah59883 жыл бұрын
There's no air filter and intercooler?
@jjesusramirez41313 жыл бұрын
Where is the intercooling 😳
@tudorpopa99783 жыл бұрын
Real mechanic
@simonriddick3 жыл бұрын
You have to respect this. Great work.
@PakistaniTrucker3 жыл бұрын
❤️❤️
@miguelescobar70533 жыл бұрын
Muy bueno para armar turbos maestros
@LukasK853 жыл бұрын
montaż kluczem dynamometrycznym, specjalistyczny sprzet do wyważania turbo, badania przepływów, komputerowa regulacja cięgna WG - a tu szmata śubokręt i familia do montażu turbo haha nie chcę wiedzięc jak piszą pod niego soft :D
@PakistaniTrucker3 жыл бұрын
😊
@m.puuseppe60543 жыл бұрын
Das erste pakistanische Werkstattvideo bei dem der Arbeitsplatz sauber ist! 🙈
@emilioleandrotodo87063 жыл бұрын
wehre is the Intercooler!!!???
@RDC_Autosports3 жыл бұрын
just saying there’s no piston oil cooling nozzles in that non turbo engine… take the risk of melting pistons
@titofranz31363 жыл бұрын
Just to have better efficiency. Melted pistons didnt caused by excess pressure in the cylinder but rather the excessive fuel that is being delivered(too much fuel) unlike the gasoline that melts piston when the mixture is lean
@mirzaosmanovic54303 жыл бұрын
I put big turbo od factory non turbo diesel engine and I boosting it on 2.5 bar and 5800 max rpm and after 30000 kilometers only baring on rods god demaged and get noking for lanst 1000 kilometers and its important to have bigg bigg oil cooler and don't run in max rpm on hig speeds or poling in max rpm
@muhammadhanifkurnaen66893 жыл бұрын
Low boost aplication still ok for the engine. Its usually found on low tier emission standard (euro 2 or below). Another isuzu engine that doing this way and still in production is isuzu 4HG1-T wich does not have Intercooler and low boost. Competing with 4D34 and W04D engine.
@averageindianconsumer30193 жыл бұрын
Hey what about intercooler man are going to pushin hot air
@patrickstevens77863 жыл бұрын
Is that anti-sieze I see on those studs!!!!?
@MKVB2203 жыл бұрын
Доброго дня всем. Кому нужна эта балансировка, тиски накидной ключь в них и чувак в кепке модной, какая затяжка с по Ньютону а гайку хоть бы на краску.
@313m3n7073 жыл бұрын
what's the horsepower gain on the turbo?
@theonlygamer60843 жыл бұрын
Its over 9000😂😂😂
@dre59733 жыл бұрын
69 goat power
@orosa743 жыл бұрын
Does anyone know what’s The white their using in the exhaust manifold?
@nunez23j13 жыл бұрын
Just high temp rtv silicone
@orosa743 жыл бұрын
@@nunez23j1 ok, thank you very much.
@itsme32973 жыл бұрын
Are you guys gonna tune it or not?
@knightfall75343 жыл бұрын
What turbo is this? Asking for a friend
@fahim111able3 жыл бұрын
pakistan actually got best machenics for cars and tuners
@PakistaniTrucker3 жыл бұрын
😍❤️❤️🇵🇰
@kasperaustin3 жыл бұрын
Excellent job 👌👍
@PakistaniTrucker3 жыл бұрын
Thank you ❤️❤️
@matif44403 жыл бұрын
technical skill is bereft without culture
@preddy29403 жыл бұрын
great video but please get a torque wrench
@ПользовательА-у6ю3 жыл бұрын
Блин, тюнинг на потоке прям!! они на коленке делают лучше, чем АвтоВАЗ на заводе
@ПользовательА-у6ю3 жыл бұрын
@Demon X не у Тебя. мы с Вами на брудершафт не пили.
@mybestieischloer24013 жыл бұрын
you guys have good team work.two thumbs up.
@PakistaniTrucker3 жыл бұрын
😍👍❤️
@atlspeed3 жыл бұрын
dude hair cut is cleeeean
@AhmadAliKohi3 жыл бұрын
And I highly recommend an intercooler and a bov
@baghdadsersar53473 жыл бұрын
It’s a diesel no bov
@miksu77843 жыл бұрын
Diesel cant have bov
@madeleyinc2 жыл бұрын
You need to stick with sewing. Leave mechanics to the men that know what they're doing.
@camillelecoeur71883 жыл бұрын
Sérieux le respect de la mécanique.....
@anglers94543 жыл бұрын
Turbo piston and non turbo piston are different.
@anibalvelazquez84123 жыл бұрын
Saludos desde Honduras buena enseñanza ,agan videos traducido al español
@boltonky3 жыл бұрын
Great work but don't understand why the exhaust is so short under the vehicle there is no logic in that
@PakistaniTrucker3 жыл бұрын
Thanks for your comments, exhaust pipe extends to the rear wheels I guess ...