How to Make a BIG Wooden American Flag! (3 by 5.5 ft!) DIY Wood Project

[@gordonshute8816]

Nice job brother. At least there are still some people on this country that appreciate the flag and it's symbolism. Keep up the good work

[@MaxF01]

Thanks a lot brother I appreciate it!

[@user-nk9pz8lp4d]

Max = the upbeat energizer bunny

[@MaxF01]

Haha thank you😂

[@doncrist2012]

Thanks for the idea of using the sticking spray on the stencil. I have had problems with my flags using just little weights and tape.

[@shannonroberts9757]

Very nice. I've been wanting to build one this size but wasn't sure about the dimensions. Thanks for doing the video man. Beautiful flag. 👍🏻👍🏻

[@MaxF01]

Thanks a lot Shannon I appreciate it!! 🙏🏼

[@davepillow8478]

Love it. I see a table top in my future.

[@MaxF01]

Thanks Dave!

[@johndiego3105]

Max, another excellent job and video. You make it look so easy to do. You have serious talent

[@zanebanks1530]

Easy tac! Damn I wish I thought of this. I’ll be doing that on the next one. Nice video!

[@MaxF01]

Haha it works pretty slick! I used it on the Dont tread on me flag and was pretty surprised at how well the details turned out. Thanks man!!

[@robertcasto9806]

Another good flag. Now that would be a good size for custom area in the union.

[@MaxF01]

Thank you Robert! I agree!

[@nathanwiederhoft5075]

Great video man. I've been trying to find a video like this one cause I plan on building a 3 ft by 5 ft red thin line flag for my shop since my wife and are are firefighters.

[@MaxF01]

Thanks a lot man i appreciate it!! I hope the build goes well and thank you both for being first responders 😎🇺🇸

[@butchmiller2451]

Nicely done, a drum sander would make short work of your sanding process. 5 minutes vs however long it took with an orbital sander.

[@josepheburge]

Great job on your flags. I recently completed this flag based on your directions. Easy directions to follow and thank you!

[@Jimc4007]

Another great video! I haven't gone up in size, I did make a smaller one. Milled down a 1x12 for 1" stripes.

[@MaxF01]

Thank you Jim! The smaller ones are always fun to make and thats a good idea for the lumber!

[@bretfox4532]

That easy tac just makes those stars easier, I like it. Wondering if a paint roller would help tac it down better.

[@MaxF01]

Yea i really like it also, and thats a good idea! Ill have to give it a try

[@scottglesmer137]

Stencil size please

[@Lutzboater]

Just another great flag. Well done Max.

[@MaxF01]

Thank you very much! 🙏🏼

[@stephanieprice5780]

Awesome job, as usual!! Thank you for the video!!🇺🇸

[@MaxF01]

Thank you so much Stephanie I appreciate it! 🇺🇸

[@johndowning4292]

Ok to do those 1x4's 77.5"x62" to use on a truck bed cover

[@RexfishingFinland]

Looking good max😀👍

[@jb1933]

Great flag. I made your smaller version where you carve out the stars for my wifes grandfather who is a retired army vet and he loved it. I'm wondering if you do any other countries flag? He's Mexican American and has a sticker with both flags. I would love trying to make one with both flags combined. Any pointers? Seems difficult. Thanks keep up the good work.

[@AngieGreer-b1m]

Is there a supply list including stencil size?

[@laurasandoval1760]

Love love you do awesome work.

[@MaxF01]

Thank you so much!!

[@sugoiharris1348]

I need this in my life. I also need the tools to do this.

[@1newsted]

I love this and I'm trying to make one, but I can't find this stencil for the stars. Has anyone had any luck finding one that size.

[@hvwoodcreations6278]

Awesome work

[@MaxF01]

Thank you very much!!

[@Charles.Spillman]

@@MaxF01 Do you have another link to the stencil? as it is no longer available on Amazon

[@BrittanyChambers-y8n]

Why do you not glue each board edge?

[@mikemcdermott1988]

Man, that is some great craft working! Do you do any other flags, by chance?

[@chrisjosheff9527]

Any chance of getting you to do a video on how to use the bernzomatic torch? I think I want to try to make a flag and I really like the burn/distress look. Never used a torch before and would appreciate a tutorial.

[@traceydetwiler9552]

Great job

[@MaxF01]

Thank you Tracey!

[@BanderaBoricua]

Good job🇵🇷✌🏻Hermosa bandera!!

[@Missyp0819]

What are the names of the stain you used?

[@johnrojas8366]

To make this clear. The union is 26 5/8" X 18 13/16". 7 stripes 39 7/8" and 6 stripes at 66 1/2"?

[@elitelawn9547]

Great flag. Nice job.

[@MaxF01]

Thank you 🙏🏼

[@davepillow8478]

Love the video. Question. What size are the stars ? I’ve made a few flags from watching your videos. Thanks

[@josepheburge]

2 inch stars

[@redneckalo8491]

Great flag! What's the largest you can make?

[@Tideroller70]

Hey man amazing flags. Was wondering if you had a size in-between the 36 long and this one in the video.

[@Burley_Pepper_Co.]

Nice! What size are those stars?

[@jamesbarovero2266]

Nice flag but know one offers that stencil size not even Amazon.

[@jamesbarovero2266]

Yes, I can’t find that size stencil. How large is each star. Maybe we can buy the stars buy the bag and paint them. Think that would look cool too.

[@kennykennedy3478]

Do you have another site for the stencil no longer available on Amazon

[@nancyinnevada2785]

THAT ONE IS HUGE 🦅💗🤍💙🦅

[@maryfit3166]

Another great flag!

[@MaxF01]

Thank you very much!!

[@JB-br1ey]

If you are using 1x4 the height of the flag would be 45.5". That's quite a bit bigger than 3'. Am I missing something?

[@charlestouchton4871]

That is my question as well.

[@flybor]

He said rip them down to 2 11/16 so I would just buy 1x3 not fours if thats the case

[@traytonwuollet1776]

That’s awesome! 🇺🇸 I wonder how big you could make one?

[@MaxF01]

Thank you!! We might have to put that to the test!

[@RexfishingFinland]

Subscribed just found your channel.

[@schmeling2688]

How are your sales with all of your American wooden products? How do you market?

[@fishn365]

Great video! Man, with the price of lumber up, have you had to cut back on what you're making?

[@fishn365]

@@ballout7956 free? Like, you are allowed to remove whatever is left over, or, the old five finger discount? 🤣

[@fishn365]

@@ballout7956 not a bad deal!

[@Jimc4007]

@@ballout7956 you wouldn't happen to live in Central Texas would you? You need a couple more friends! 😁😁 That's a great way to help the employer and yourself, win-win.

[@ScreamingEagleFTW]

looks awesome but the stars would be awesome if they were 3d wooden stars.

[@SamerMasterson]

Sickkkk

[@MaxF01]

Thanks man!!

[@xsiner]

Looks awesome, with the price of lumber it only cost $500 in wood. LOL

[@MaxF01]

Thank you! Haha no kidding!😂

[@bretfox4532]

What's the union stencil size?

[@bretfox4532]

Never mind, just saw it in the description.

[@volfan8141]

Love the flags. I actually watch your videos when I need a refresher on making flags. If you don't like the flag or what it represents then get out of the US!!

[@MaxF01]

Thank you so much I appreciate it! And amen to that!! 🇺🇸

[@A.G.Rich51]

Murica

[@SteakMuncher-n9f]

Second!

[@neitzche1245]

Ok, maybe start doing other flags? Canada, Britain, the Olympics are coming up. I’m sure if you stop only doing American flags you will get more subs. Good luck.