Nexus Pro X (USA): www.walmart.com/ip/Adventure-Force-Tactical-Strike-Nexus-Pro-X-Manual-Ultimate-Dart-Blaster-with-24-Half-Length-Darts-Flies-up-to-200-ft/5101859033 Nexus Pro X (AUS): www.oztoystore.com.au/products/dart-zone-adventure-force-nexus-pro-x Nexus Pro X Upgrade Spring (USA): dartzoneblasters.com/product/nexus-pro-x-high-low-powered-spring-set/ Barrel Collet (USA): outofdarts.com/products/nexus-pro-x-barrel-collet?ref=RIa3bVI3vXYhUs Frontline Foam (USA): www.frontlinefoam.com/?sld=8 Worker Heavy Darts (USA): www.frontlinefoam.com/product/worker-gen3-darts-high-end-heavyweight-1-2g-box-of-200/?sld=8 Worker Darts (AUS): www.foamwork.com.au/product/worker-gen-2-he-foam-dart/1 Worker Heavy Darts (USA): outofdarts.com/products/worker-short-darts-200-pack-he-heavyweight-1-2g?_pos=2&_sid=4ce374717&_ss=r&ref=RIa3bVI3vXYhUs
@koenkooiman14903 ай бұрын
Got myself a Worker Harrier for a 300fps event in Denmark next month. And got a BK1S on the way. Bought them after seeing your reviews, keep up the good work! You are very much appreciated!😁👍
@sewwes123 ай бұрын
Foam Nomads!
@paullassahn46413 ай бұрын
If you want it to last shooting 300 fps you are going to want the sabre priming block, plunger & catch. using a 1.8x350 Swift spring
@koenkooiman14903 ай бұрын
@@paullassahn4641 ok, I got the sabre parts. I don't have the spring yet. Thanks for the advice!
@Kannolias3 ай бұрын
@@paullassahn4641where would you get that 1.8? I got mine off amazon from jcgworker and it's made of very poor quality materials.
@kingofgames2343 ай бұрын
@@paullassahn4641 you don’t need the sabre priming block and if you use the sabre plunger rod and catch make sure to grease the catch a little or the metal on metal will eat the catch even though it is metal. It will do 300 FPS on the 1.6 x 300mm if you just get a tighter barrel.
@JangoFoamFlinger3 ай бұрын
Wow. Great video. I can't believe how easy it is to get a Nexus Pro X to 300 FPS. Have you heard of the Siren Mauler, apparently it can go up to 270FPS out of the box. No modding necessary.
@mattorama3 ай бұрын
"I'm going to be ignoring the downgrade spring entirely." Good man.
@atmaanu48253 ай бұрын
It is even more impressive that you can prime this thing over and over again for the chrono, accuracy, and range test.
@BradleyPhillipsYT3 ай бұрын
It becomes a workout when you do it repeatedly
@Chamdar173 ай бұрын
great video! Lots of good detail and explanation matched by results, and I especially appreciate the 'survey' of other players at the end. Well done, sir!
@ScottBionicBlastersАй бұрын
I know, I've watched video before, and I've comments on it before. But, I'm incredibly impressed with what this blaster is capable of, when properly modded. I remember my old Aeon Pro didn't make full use of it's pluger-system because it was tailored for both long darts, and short darts, and by dedicating it to 1/2 darts, lengthening the prime, removing the 'slop' in the Mechanism, I was able to achieve a rather marked increase in fps/mps or whatever, before I addressed the spring pressure at all. I appreciate the simple approach you took to this mod. Though, I've got to order more barrel material.
@redxarmy78073 ай бұрын
The quality of these videos are awesome. Im really enjoying them. 😊
@quasistellar3 ай бұрын
I had a feeling this would be the result, considering the tube size and length. I'm still really impressed with the stock performance. I think the only thing that comes close under $100 USD is the Trion, and it's 60% more expensive and needs spacers to hit 200 FPS. For a $50 Walmart blaster I'm still amazed. I will also say that mine does have a perfect seal, which surprised me. I feel like this is the blaster that will really change the way kids view "nerf guns". The original Nexus Pro still felt really clunky, trying to still use full length darts.
@BradleyPhillipsYT3 ай бұрын
What you can buy on store shelves is definitely improving and as a result, kids will experience hobby level Nerf as they grow up. The inclusion of a BCAR was a brilliant decision.
@iank8613 ай бұрын
Very nice video Bradley 👍
@natalie_v0.0.12 күн бұрын
Sweet numbers, now I’m not disappointed about getting it first before the siren mauler was available. Ordered the spring and spacers, might try sealing it better like in this video too. Airsoft speeds are crazy for darts, def can leave a bruise.
@Vincent-cb5odАй бұрын
The bcar that came along with the pro x set really has a small inner diameter. And you managed to fit in on a barrel which i presume has a 15cm or 16cm diameter. How was that done?
@Frissdas12072 ай бұрын
I wonder if the international shipping caused issues with your seal. Mine will not gap with my finger plugging the barrel.
@jasonschwartz94813 ай бұрын
Just out of curiosity, how much performance upgrade do you think you get by just fixing the air seal?
@BradleyPhillipsYT3 ай бұрын
Not much, but it all adds up. Maybe 10fps?
@jasonschwartz94813 ай бұрын
@@BradleyPhillipsYT I literally only play with my kids...well, 15, 13, and 11... So more teens now? And hockey teammates Lol. I'm in Pennsylvania and everything competitive around here is airsoft or personal. I basically have a bunch of Nexus as a base, but am probably upgrading to more of these. That said, I didn't need anything hitting 300fps. But, getting the most out of the base Nexus pro X would be nice. Appreciate it.
@OldMateOutdoors3 ай бұрын
Good upgrade and not bad groups mate
@Kannolias3 ай бұрын
Could you do a 300fps guide on the worker seagull? I'd really appreciate it!
@himinplazy24913 ай бұрын
step 1: buy a harrier
@johnmurcott12733 ай бұрын
He already has a mod video. The gull isn't made for 300fps. As the guy above me says, buy a harrier for 300 fps
@Kannolias3 ай бұрын
@@johnmurcott1273 I'd have to check for myself, but I'm pretty sure that the npx doesn't have any more pt capacity than the seagull does. It may be difficult but i think it's definitely possible to make a seagull hit at least close to 300. Reason i asked for the seagull is because i simply don't want a blaster as long as the harrier.
@johnmurcott12733 ай бұрын
@@Kannolias the consistency drops like a stone after about 250fps.
@elldeebee14653 ай бұрын
Have you considered getting a luggage scale or something similar to actually measure the prime weight? Could be an interesting data point to compare between blasters.
@BradleyPhillipsYT3 ай бұрын
I have a fish weighing scale I've used before but could be awkward with heavier primes like this
@Bad_Rattle3 ай бұрын
Did your fore grip fit correctly? I feel like my picatinny didn’t fit right
@BradleyPhillipsYT3 ай бұрын
Yes it fit fine, might be grip depending
@Iskander-ve4bg3 ай бұрын
Are you gonna review any of those Black Raisins super expensive AEBs? Even though for Australia they might look a little to realistic...
@BradleyPhillipsYT3 ай бұрын
You mean the Storm? Already reviewed it
@Iskander-ve4bg3 ай бұрын
Well, the blizzard is the same thing, but I'd love to see you review the Skybreaker; blackraisins.com/en-ch/collections/g-o-s-games-of-softdart/products/ln02-skybreaker
@1EnZBosS13 ай бұрын
A cool blaster for only 50 american clams is really nice.
@davev838716 сағат бұрын
I am 9, and I just got a nexus pro x. It is pretty easy to prime. Should I mod it?
@billy_vr3 ай бұрын
What size barrel did you use? I want to go to home depot and get a copper pipe and use it as a barrel.
@NightFury-jd8ce3 ай бұрын
Thanks for proving what you suspected ended up true. I have a second Longshot Pro for $35 to try out a 300 FPS upgrade so not for me - love my stock NxP so much easier than original - why undo that easy prime when you can tag so accurately all day with stock easy prime.
@koolBOY83233 ай бұрын
curious if the roller on the stock AFG would help with that prime at all. i'm keeping mine stock aside from maybe some cosmetic mods, but being that DZ sort of intends that spring with those spacers to be used on an otherwise stock blaster, i kinda wanna know what just the spring and spacers do, without the additional barrel and better seal, and the vertical grip. it's likely a total catastrophe, but it might be fun to watch the crash.
@BradleyPhillipsYT3 ай бұрын
The stock blaster with upgrade spring caps out around 250-270 fps I believe
@BradleyPhillipsYT3 ай бұрын
Also the included foregrip is just bad, the roller won't improve that cheap quality
@NepDouble073 ай бұрын
What made you come to the 35cm barrel? It seemed very consistent with that length.
@BradleyPhillipsYT3 ай бұрын
So, like a month ago I calculated the air volume and I think I went with a 1.6 or 1.7 ratio
@strykerfpv3 ай бұрын
@@BradleyPhillipsYTso would you consider this peak barrel length, even with a stock spring? considering getting an npx and just sticking a 9$ kuryaka barrel on it with the stock spring and bcar
@BradleyPhillipsYT3 ай бұрын
Stock spring you'll probably want a little shorter. Maybe 30cm or so.
@strykerfpv3 ай бұрын
@@BradleyPhillipsYT makes sense yeah. thanks!
@knevil7533 ай бұрын
such a great blaster evern without the upgraded spring. the spacer(s) x spring make the blaster feel sloppy. its one or the other for me.
@Zetson2952Ай бұрын
Does the harrier spring fit?
@CitySlickerRisenАй бұрын
What’s the name of the optics that your using?
@kingofgames2343 ай бұрын
I’m actually cooking up a completely different solution to get it up to 300 fps without a barrel collet. But I like the transparency on how bad the prime is 😂
@BradleyPhillipsYT3 ай бұрын
I mean, you could tap the stock muzzle for a grub screw or something, interested to see what you come up with.
@kingofgames2343 ай бұрын
@@BradleyPhillipsYT I did the grub screw for my super spamf build but this time I’m trying something new! I’ll let you know if it works or if my NPX blows up in the process 😂
@jasonschwartz94813 ай бұрын
@@kingofgames234 if it blows up ... The video is still needed lol.
@Motionnerf3 ай бұрын
Would be cool to see you do a video on the dzp mk-4
@BradleyPhillipsYT3 ай бұрын
I considered it trash when it came out and that hasn't changed. Who makes a barrel extension that you can't add rifling to? Lmao
@poop420blazeit3 ай бұрын
@@BradleyPhillipsYTfinally someone who doesn’t endlessly suck DZ off lmao (Drac)
@tntchickenwingtnt85983 ай бұрын
have you ever tested rifling on nerf darts similar to first strike paintball rounds along with fully rifled barrels
@BradleyPhillipsYT3 ай бұрын
I have tried rifled darts but the creation of them was too inconsistent
@tntchickenwingtnt85983 ай бұрын
@@BradleyPhillipsYT what about fully rifled barrels? i think air gun rifled barrels may be useable. i know that Tiberius arms was going to make a rifled 50cal barrel for 50 cal fsr round for their flagship revolver but they never did
@johnmurcott12733 ай бұрын
@@tntchickenwingtnt8598too much drag
@paullassahn46413 ай бұрын
I don't think this would last long. The catch or priming block would probably break in a day. I was surprised how hard the prime is with the heavy spring DZ sells but I suppose they' might sell more blasters when they break innevitably
@BradleyPhillipsYT3 ай бұрын
Good for business if they break, though I haven't seen it happen yet
@Donut1172 ай бұрын
Anecdotally, I have a group that uses several Nexus blasters. They initially had the upgrade spring in them, but something inside the blasters would make a loud "snap" sound and the tension would release. Nothing seemed to be broken, since they worked with the original spring afterwards. Between seeing that and how hard they are to prime with the upgrade spring, I kept the spring stock on mine, and it's been great.
@Daniel-ef8ry3 ай бұрын
What scope are you using in the video? Can you provide me a link?
@BradleyPhillipsYT3 ай бұрын
It's a Holosun HS506
@wistralis73873 ай бұрын
I know you’re exclusive to springers, but how about the sabre flywheeler that looks like a kriss vector?
@BradleyPhillipsYT3 ай бұрын
Soon says Conrad who is sitting next to me
@seniorxj29313 ай бұрын
Somebody's gonna make a bigger metal plunger tube after watching this 💯!
@jolemaire66293 ай бұрын
What does just the longer barel with no air leaks with the stock spring do to the performance?
@BradleyPhillipsYT3 ай бұрын
Probably not much, the stronger spring matches well with the longer barrel, stock spring would need somewhere in between
@Aaron-l9q3 ай бұрын
Hey I Have A Question How Do I Remove Slam Fire So I Can De-Prime The Blaster
@BradleyPhillipsYT3 ай бұрын
I don't think you can due to how the firing train works
@totophi3 ай бұрын
Why do you capitalize the first letter of each word, yet completely avoid all punctuation? 🤔
@Aaron-l9q3 ай бұрын
@@BradleyPhillipsYT Alright Thanks For Letting Me Know I Appreciate It
@Aaron-l9q3 ай бұрын
@@totophi I’m A Kid I Think I Looks Good It’s Just Personal Preference I Guess
@littletrollinganamations3614Ай бұрын
When i put spacers in it it destroys the darts what should i do
@kerb233 ай бұрын
Any idea what the upgrade springload is in kg?
@BradleyPhillipsYT3 ай бұрын
At full compression, around 50kg I believe
@BradleyPhillipsYT3 ай бұрын
Notably the spring is no where near full compression even with both spacers.
@fullarmourtracksuit40233 ай бұрын
Jesus that’s heavy.
@alansurya65413 ай бұрын
Waiting for the silentknight footage tho.
@derkaiser98812 күн бұрын
I'm honestly just surprised the Nexus Pro X can take that amount of power.
@frogsbutfrogs3 ай бұрын
i wonder how long this will last
@frogsbutfrogs3 ай бұрын
in terms of long term durability
@BradleyPhillipsYT3 ай бұрын
Quite likely not forever 🤣
@frogsbutfrogs3 ай бұрын
@@BradleyPhillipsYT yeah, i wonder if sabre is gonna come out with anything for this, also how long in advanced are your videos filmed
@BradleyPhillipsYT3 ай бұрын
@@frogsbutfrogs the pinned comment can usually give you an idea of that
@frogsbutfrogs3 ай бұрын
@@BradleyPhillipsYT yeah also, is sabre putting on another operation silent night style event
@MaxLara-vs9gm3 ай бұрын
Can you please tell us where is your scope from 😭😭😭😭
@BradleyPhillipsYT3 ай бұрын
It's a Holosun HS506
@hal0odst7543 ай бұрын
With this what are the hobby grade blaster brands doing? 😂
@DEVILISHLY_DELICIOUS3 ай бұрын
My xshot long shot can hit 300 fps, but only with cut down elites, and without a bcar. The prime is so hard i can't prime it with 1 hand.
@BradleyPhillipsYT3 ай бұрын
This has a heavier prime than my 300fps Xshot Longshot for sure
@DEVILISHLY_DELICIOUS3 ай бұрын
@@BradleyPhillipsYT that's incredible. Which has a bigger plunger tube? Do you think either could hit 350?
@BradleyPhillipsYT3 ай бұрын
@@DEVILISHLY_DELICIOUS I think XLS has larger
@DEVILISHLY_DELICIOUS3 ай бұрын
@@BradleyPhillipsYT thanks.
@GrandmasterHobbyist5 күн бұрын
why did most of those grown men look like they couldnt get 1 prime much less all day lol..they need to upgrade their springs aswell for the workout
@scottblack27603 ай бұрын
You know the muzzle piece comes out without opening the body right?
@BradleyPhillipsYT3 ай бұрын
Yes but I also needed to glue the barrel in
@scottblack27603 ай бұрын
@@BradleyPhillipsYT Needed is a strong word. I did notice not all Kury barrels are exactly the same O.D. However, I did get a great seal with one but the sick purple one I needed a little teflon tape. Thanks for the awesome content bro!
@BradleyPhillipsYT3 ай бұрын
@@scottblack2760 no, what I mean is without a 3D printed barrel collet, what would hold the barrel in? Needed to use glue in this scenario.
@scottblack27603 ай бұрын
@@BradleyPhillipsYT I hear you. I jammed a couple cheap o rings in it. Not ideal for sure but the X Fox muzzle is just a fancy version of stuffing an o ring in there.
@AnTran1473 ай бұрын
Pretty cool, but it still looks like a frog with its tongue out to me
@BradleyPhillipsYT3 ай бұрын
A great description
@PeterCampbell-mb7np3 ай бұрын
Pils 400 fps
@paulnew33103 ай бұрын
What does pils mean?
@BradleyPhillipsYT3 ай бұрын
Not happening with the Nexus Pro X
@PeterCampbell-mb7np3 ай бұрын
Why
@timshooter803310 күн бұрын
@@PeterCampbell-mb7np I would guess...plastic shell ! & you need a bigger plunger tube...as well
3 ай бұрын
The Nexus is a very poor design. it is very difficult to pull up, its mechanics are too complicated and this has not changed in Nexus 2.0 either. and on top of that it's LGBT color.... i think it's a mistake
@maybeasianricecooker3 ай бұрын
what... is wrong with lgbtq
3 ай бұрын
@@maybeasianricecooker nothing wrong with LGBT.
@paullassahn46413 ай бұрын
@@maybeasianricecookerat least everything after the b, but in general all of it
@king_min_kyratАй бұрын
its purple..what are you on about mate
@natalie_v0.0.12 күн бұрын
I hope you don’t use *any* colors other than black and white then. They’re all on the flag :p