How to make your Dodge Charger Pop on Decel!

[@tone3560]

Sells civic and buys a charger...videos like this are produced

[@DropTopPerformance]

😂😂😂😂 I've actually never owned an import. However it's what the people like 🤷‍♂️

[@co9648]

@@DropTopPerformance Where do you live?

[@DropTopPerformance]

@@co9648 I just moved to Florida from Germany

[@shadowblack10]

Lmaoo I just Came from an 05 Civic to a Scat Pack in March

[@SDGunfighter]

Video starts at 3:00 you're welcome

[@soufianDEMOS]

Are you based in Germany ? Will this be the same settings on a Charger RT 07 ? Cheers

[@MOHAMMEDMUHANNA-k3r]

I've put big negative numbers in Spark base and minimum spark base But there is no result What i do 😢

[@Syuurp]

Just know that if you do this, don’t expect your cat to live for long 🤣

[@DropTopPerformance]

You're absolutely right haha

[@scatdaddy3922]

Thats why you delete it lol

[@DropTopPerformance]

@@scatdaddy3922 faxxxxx

[@cryptsys]

fuck that cat we dont need it :D

[@sunnysaggu5068]

I had done this pops and bangs tuning on my V6 3.6 and my engine was gone I had to replace it with the new one as the old engines pistons were broken and smoke started to come out of the engine. Help me

[@510CurtDawg]

Will you still get the crackles and pops with no cats??

[@ciarayoung5523]

How you turn off rear o2 sensors

[@Woo9foe]

How did u add paddle shifters on your car because i have a 2013 charger rt n it didnt come factory

[@Goyxrd3]

Hey I have a Subaru Impreza and have a custom crackle pop tune by my tuner. Do you have stock cats and if so have they been damaged by the tune yet? Please let me know ASAP I’m trying to decide if I should go catless now or wait!

[@DropTopPerformance]

I do still have stock cats with no damage that I have seen. But it will break down the cats over time, if you can upgrade to a catless down pipe do it.

[@Goyxrd3]

@@DropTopPerformance thx for the response so what your saying is I should be good for a while?

[@DropTopPerformance]

@@Goyxrd3 yes sir, all depends on how aggressive the pop tune is.

[@Goyxrd3]

@@DropTopPerformance alright thanks again for the quick reply brother 👍 I appreciate it! Subbed to your channel :) lookin forward to more content keep up the great work

[@JSanchez-jl7qn]

Hey whats good DTP... Very informative video ty i have a few ?s first How did you get the egr on your Engine general page?

[@goat_tingss]

@droptopperformance it says my ecm failed

[@bryanbrewer7702]

Did you get it to work?

[@jonwavy6242]

I have a cts v, it doesn't have a part throttle table only a hi and lo table, any ideas?

[@DropTopPerformance]

Yes, so GM will have a High and low octane spark table. That is your only spark table (much easier BTW lol) but what I would do is use your Scanning tool go for a drive and log your timing throughout the drive. Then look at where the hits are on deceleration and start adding Negative timing were you see fit. Once you find that sweet spot copy and paste your high octane spark table into your low octane spark table. Then you should be good to go!

[@jonwavy6242]

@@DropTopPerformance thanks for the reply, and how much negative spark do you add? by increments of 1 or 2?

[@DropTopPerformance]

@@jonwavy6242 I did by 5s till I got to 15 then started doing 2s. You'll just have to see what works for that particular application 😁

[@ak2296]

Bro,Do I need to do cat delete first for getting pop tunes?

[@DropTopPerformance]

Don't need to, but it'll help and keep you from destroying them. That way you can sell them for a lil $$

[@watchthemaster5906]

Bro what. It just made it self rev, and randomly bounce off revs around 3k rpm.

[@smvfishing1185]

Do you sell a pop tune? Tried to follow the instructions and didn’t work for me 😅 just gets stuck revving up.

[@DropTopPerformance]

Yes i can do that.

[@benhumphries2993]

@@DropTopPerformance how can I get in touch with you for the same thing?

[@ruly986]

did you have to mess with the minimum spark table at all?

[@DropTopPerformance]

So I did yes

[@ruly986]

@@DropTopPerformance I see that would explain why I was having a hard time getting the timing to drop under 10 degrees thanks for the reply

[@007dpond]

@@ruly986 Have you got any more info on this ? Thanks

[@007dpond]

@@DropTopPerformance do you have a little more info on this ? Thanks

[@ruly986]

@@007dpond what do you need to know?

[@christopherbenjamin1914]

Does this work for a 2011 and if so can you send me the tables I need to change? I can’t get it to burble at all

[@hemipower333]

So I just tried doing this on my truck and it doesn't pop or anything just feels like someone is hitting the throttle fast. 😕 Was hoping this would work

[@captain052A]

Great job! I did the same setup and also had my car stuck revving and doesnt want to go down. So should I keep the exact numbers from base to minimum spark? Or should base be more negative?

[@16prettyboy16]

I need the same thing, my cars stuck revving and don’t come down after a decel

[@captain052A]

@@16prettyboy16 did you fix it?

[@James-hg5tk]

Same

[@goat_tingss]

Hey man it’s saying my ecm failed

[@andresabeja1854]

😂😂😂

[@garagexrunner5968]

Can u do the same map tune on any car that is compatible with HP tuner??

[@DropTopPerformance]

Same concept probably, what is the vehicle??

[@Buster10211995]

How did u come up with negative numbers

[@xDaltn]

Will this work for a 3.6 Charger?

[@DropTopPerformance]

Yes it should, you may have to play with the tables a little just to find the sweet spot.

[@xDaltn]

Drop Top Performance with the hp tuner you have linked do I need to have unlocked pcm? 2015 sxt

[@DropTopPerformance]

Unfortunately yes 2015 and up need to have their ECU unlocked. You can send it to HPTUNERS and I believe it's a 2 day turn around

[@rodriguezluisu87]

Is possible to do a ghost cam tune on hemis like guys do on Ls motors?

[@captain052A]

Bro! Do we change MBT or Min spark after part throttle? For back fire.

[@DropTopPerformance]

Yes

[@captain052A]

@@DropTopPerformance i mean which one MBT or Min spark?

[@Jordan_Scatdaddle]

Would this work for a 2020 scatpack

[@hassanabas1549]

What about if I Want more flames I should go and richen my maf table according to my spark at specific cells can you make a video that continues this video about that part of the backfire tune I am stuck there ☺

[@DropTopPerformance]

Yes so if you add a little more fuel you get some flames. But also it depends on your exhaust set up😁 if you have any more questions feel free to message me on FB @ Drop Top Performance

[@hassanabas1549]

@@DropTopPerformance yeah I know that but I just don't know where to richen the maf table I gathered info about this everyone says it just need some logs to figure out where are you at and where to richen the table you don't want to just randomly richen the whole table lol like I did for experment of course so I just want to see some one that actually does it sorry that i had to bother you here I don't have a fb maybe email If you have and thank you for replying

[@DropTopPerformance]

@@hassanabas1549 so honestly a lot of it has just been me experimenting with it lol if I was to add fuel I would do it in the low engine load/mid RPM area. If its NA you really gotta throw some crazy stuff at it to hurt it, however if its boosted thats a different story lol

[@teezteeter1875]

where’d you get the steering wheel emblem?

[@timbonifas2174]

Do you need to buy the pro version to do these changes?

[@DropTopPerformance]

no you do not

[@timbonifas2174]

@@DropTopPerformance Thank you! Would you need the pro version to tune for a cat-back and CAI?

[@DropTopPerformance]

@@timbonifas2174 the only real advantage to the pro version is the ability to log your wide band. So no, ill be going over stuff like that once I get back home in a few weeks and can post again!

[@timbonifas2174]

@@DropTopPerformance Awesome! Thank you!! I will keep on the lookout for that video!

[@6speedcat]

Hey are you still in Stuttgart? I am I. Wiesbaden

[@Blacktopmafia660]

Question. I’m getting into tuning hemi’s with hp tuner. So if i understand correctly. You need cats to get the pop. No cats, no pop?

[@DropTopPerformance]

Without cats it will be more aggressive. You can make it happen either way.

[@Blacktopmafia660]

Drop Top Performance sweet! Thanks man. That’s what I needed to know.

[@champtv2033]

So should i adjust the minimum spark table as well

[@DropTopPerformance]

Yes, that's something I completely over looked while making the video and I apologize!

[@champtv2033]

Drop Top Performance no biggy still a great vid bro!!

[@DropTopPerformance]

@@champtv2033 thanks man! Now that I'm back in the states I'm gonna start trying to do more videos for these cars

[@510CurtDawg]

Thank you thank you for gettin some mopar hp tuner stuff up!! Not much on the tube for the hemis

[@jiggyr5504]

Would this work for dodge charger gt

[@Jayz_photography1]

Can you do it for a 2015

[@DropTopPerformance]

Yes but the ecu needs to be sent off to get unlocked for 2015 and up

[@sanalaking7704]

Can I do that on my 2015 Dodge Charger rt?

[@DropTopPerformance]

Yes, however you will need to send your ECU into HPTUNERS to have it unlocked

[@sanalaking7704]

Drop Top Performance it’s already unlocked and I already have the hp tuner, I get can’t get it pop on decal.

[@DropTopPerformance]

@@sanalaking7704 message me directly on the Facebook page and let's see if I cant help you out

[@franchise-pj6ow]

These adjustments only generate popping in park or neutral. Does NOT pop, crackle , or snap, at all on deceleration ! Sounds like a gargling sound , that's it.

[@DropTopPerformance]

You need to play around with your spark table to see what works best for your car. What works for mine may not work for yours

[@franchise-pj6ow]

Trust me I did, all ranges and some !

[@DropTopPerformance]

@@franchise-pj6ow whats your exhaust setup?

[@franchise-pj6ow]

@@DropTopPerformance bbk shorty headers to x pipe and 3 inch pipes straight out

[@helmernava9818]

will this work on 2008 300 5.7

[@jiggyrick6771]

I got a 2019 charger gt would it still work?

[@DropTopPerformance]

The same concept will, maybe a little different because its a V6

[@hammood2406]

would this work on a new 5.7? (2019)

[@DropTopPerformance]

Yes it would

[@DropTopPerformance]

@@mafiahalo93 so 2 things, 1 I completely forgot to add that you need to adjust your minimum spark table to the negative timing in the base table (sorry) and 2 the negative timing i showed was just an example. You may have to bring the cells closer together. What is happening is the car is hanging idle due to the negative spark for to many cells. I hope that makes sense

[@navdeepkhasria7505]

Does ur car aslo gets laggy when u down shift or brake? Cuz i just got mines tuned is it normal!

[@NOLXVENICK]

Mine kept failing after I got my car updated and removed all the codes any idea what to do

[@abdulrahmanjamal14]

What is the disadvantages of the pops for the car

[@DropTopPerformance]

Honestly man the only real downside would be if you have Cats still. But if you have long tubes or no cats nothing.

[@abdulrahmanjamal14]

Thanx brother Your car The cats still on it or you removerd?

[@DropTopPerformance]

@@abdulrahmanjamal14 they are still on because I live in Germany, but they wont be for much longer.....🤫🤫

[@abdulrahmanjamal14]

Drop Top Performance hahahaha thanx brother God bless your baby 🚗❤️

[@moparenthusiast2046]

Just wondering, how does this affect exhaust valves in a long run? Micro explosions from opposite side of valve head wouldnt lead to surface damage?

[@DropTopPerformance]

I'm not sure honestly when I do the cam ill pull the head and check the valves

[@JGLuxe]

@@DropTopPerformance Did you ever check?

[@riology2234]

i got catless mid pipes. would that be still doable?

[@DropTopPerformance]

Absolutely man, in all honesty it will probably be more aggressive lol

[@riology2234]

Drop Top Performance great! what's your exhaust set up?

[@DropTopPerformance]

@@riology2234 Blackwidow 250 series and Res delete. I still have my stock headers and Cats till I get back to the states. I have more videos on the setup on my channel.

[@Mopar_wyatt]

Will the table you gave us work for 3.6L? And is that a good table to start with?

[@DropTopPerformance]

So the table I showed was just an example. So just use the same concept and will work out

[@locospeed01]

Any way to make it sound like it’s cammed I know you can get that done whit the hptuners

[@justgaming8524]

Hello my friend thanks for this video i have a question do i need to delete a something in my exhaust? Or keep it original and i will hear this beautiful pops i hope to answer me

[@GoldenTracksOriginal]

Okay so I’m planning on doing this 100%!! Your exhaust is stock?? Because I see you had quad tips, so did you just buy tips? Change exhaust? I want to know because my exhaust is factory stock (and looks ugly)

[@DropTopPerformance]

They are not stock, I have blackwidow exhaust and res delete with quad tips

[@Mopar_wyatt]

Drop Top Performance can you link the quad tips please

[@Clutched392]

Do you know how to make a 392 hemi spit flames? I already got my cats mufflers and resonators out and have long tube headers. I do get pops but no flames.

[@DropTopPerformance]

I would have to see the tune and see what you're commanding and adjust from there

[@Clutched392]

@@DropTopPerformance I use diablosport (unfortunately I didn’t know hp tuners existed at the time I bought diablo, or else I would have gone with hp tuners) and I have no clue how to tune with it. I’m pretty sure I need some sort of license in order to custom tune it and look at my data logs

[@DropTopPerformance]

@@Clutched392 i believe so, im not really a fan of the Diablo stuff for that reason. I wish I could help

[@connorblazek3141]

Would I be able to do this for a v6 challenger

[@DropTopPerformance]

Unfortunately I'm not really sure, the software is the same but the engine is different. So use the same concept in a different group of cells and it should work

[@makai12383]

Okay so when I’m idle I got it to pop but when I’m driving on decel it doesn’t and my rear end jerks around 1500 rpm anyone else get that problem?

[@hashimalfraidi4977]

bro this is really helpful ... but i have srt 2016 charger when i go to DFCO there is no temperature to max out there is speeds (VSS) can you help me with that??

[@TheSchraith]

I tuned my car identical to what you have in the video and haven’t heard a single pop. I’ve also only experienced a significant loss in power. Not sure what’s going on. I don’t have cats. Could that be it? You should share your secret sauce

[@DropTopPerformance]

That's not good man, is yours a v6 or V8??

[@TheSchraith]

@@DropTopPerformance v8. i took the tune off but would like to see your setup.. i absolutely love it

[@TheCookiezilla]

Do you have the mufflers and resonators

[@DropTopPerformance]

@@TheCookiezilla I have Res delete and running Blackwidow 250s for my Mufflers

[@TheCookiezilla]

Drop Top Performance how do you get it to pop when not in drive mine won’t

[@jrt_3453]

Do i need to buy credit in order to do this?

[@danielschmidt3446]

Do you have to do anything else? My tuner tried your chart on my 2012 5.7 and it got stuck at 4k rpms when revved. Do i need to reset the ecu or bring the keys far away front he car so it resets?

[@daytonrd17]

Daniel Schmidt when your charger/challenger is in park or neutral your ecu limits to 4,000RPM. That is completely normal for your car to do.

[@DropTopPerformance]

Yes so once I get settled here in the states I'll do a video on how to take off the limiter while in neutral using HPTUNERS!

[@danielschmidt3446]

@@daytonrd17 I know that. I got the rev limiter bumbed up to 5500 rpm when parked. But my rpms would stay stuck around 4k even with the foot off the pedal.

[@daytonrd17]

Daniel Schmidt aaaaahhhhhh. Just making sure. Good luck with that.

[@DropTopPerformance]

@@danielschmidt3446 I'm assuming you copied exactly what I posted lol you gotta play with the cells and see what works for your car. That was just an example.

[@teampupusas5032]

You can used this in a challenger srt8 2010?

[@DropTopPerformance]

Yes sir, may need to play around with the timing table to see what works best for your car

[@realneth]

would this work with a 2019 scat pack?

[@DropTopPerformance]

Yes but the ECU needs to be unlocked by HPTUNERS

[@ThuqqN4styy]

so the more negative timing the louder the pops?

[@DropTopPerformance]

Yes however I do not recommend more than -25 degrees

[@engineermira8587]

Drop Top Performance what is a side effect on engine for pops programming?

[@thomasbusacca6585]

Hey man what’s going on, you think this will work for a 2018 Rt that’s got catless midpipes?

[@DropTopPerformance]

I do believe it will!😁

[@goat_tingss]

Hey brother, idk how to code or anything and the vid gave me an idea. It’s that chart a good guild line or what you use?

[@therealdjaux5184]

Quick question for anyone that has any knowledge on the 2011 5.7 hemi’s. I’m looking at getting one in December but I’ve read that people said the 5-speed transmission is very clunky and slow. Will hp tuners be able to fix that and unlock its full power ?

[@DropTopPerformance]

Yes, the Nag1 can be a little clunky. But with HPTUNERS you can gune the TCM and really dial it in.

[@therealdjaux5184]

Drop Top Performance thank you got the quick response. So all in all you recommend me getting it lol

[@DropTopPerformance]

@@therealdjaux5184 I absolutely love HPTUNERS.

[@brayanmartinez6348]

Will this work at all with diablo sport trinity 2 ?

[@DropTopPerformance]

not to my knowledge no

[@daveblank]

These instructions are incomplete. This will cause the throttle to hang. Should make the minimum spark table match.

[@joe112000]

Still no TSP cam?

[@DropTopPerformance]

Not yet, unfortunately I dont have the space or proper tools to do it here in Germany. So instead I'm saving for something different 🤫🤫

[@stinkrr]

do u need to buy the pro feature to do this?

[@DropTopPerformance]

No Sir, the pro feature I mainly just so you record AFR

[@stinkrr]

@@DropTopPerformance thanks

[@rhedinrage1601]

TY, Gonna be buying up and tuning up, thanks for the tips, gonna save me a lot of headaches :D

[@DropTopPerformance]

Anytime! If you have any more questions just message the IG page/FB page

[@farrukhahmedvideo]

I'm getting RPM hangs at 4000 with these settings

[@DropTopPerformance]

You have to make the MBT table match the negative timing.

[@AibonitoPerformance]

Am a bit confused when you said "Allows the Cat Converter to build more heat", How is that so? as catless cars pop louder than a catted car, I may just be missing something. Nice vid by the way, am trying to make my pops louder in my mustang but there is very limited info on HPtuning a mustang, so have to gather here and there lol. Thanks for the vid.

[@DropTopPerformance]

So the cat has to heat up so that it can pull all the "emissions" but the temperature is controlled by fuel cooling off the cats. So when you max the ECT and pull timing more fuel is sent into the cats and ignites the fuel creating the pop

[@AibonitoPerformance]

@@DropTopPerformance Ahh I get it, Thank you.

[@SB-qw8bz]

@@DropTopPerformance what if u don't have cats

[@driven5729]

So I am running catless pipes on my '12 R/T, so technically with this would the pops be more aggressive? Would it also be able to shoot flames? If you decide to take off your cats, could you please do a video on the most aggressive "pop-tune" and make it able to shoot flames? Amazing video!

[@leosantillan9049]

Where did you get your catless pipes bro and did you have to get longtube headers as well

[@leosantillan9049]

Cause I’ve been looking and from what I’ve seen you can’t go catless without the longtube headers and I got a 12 charger rt

[@driven5729]

Leo Santillan JBA catless mids

[@leosantillan9049]

On the stock headers

[@leosantillan9049]

?

[@UhhChriss]

so since i don’t have cats and you mentioned the catalytic converter getting more heat. would i end up shooting flames on some burbles and pops ?

[@DropTopPerformance]

In theory yes, however I cant give you a forsure answer because I still have cats until I get back to the states 😛

[@Mnd96]

V6 ?

[@DropTopPerformance]

5.7 hemi V8

[@jibbypoe1482]

I’m new, my charger isn’t RT, will it still work

[@DropTopPerformance]

Is it a V6?

[@jibbypoe1482]

Drop Top Performance yes

[@DropTopPerformance]

So ypu are gonna have to play with the spark cells a little. I've found that V6 cars like the Negative timing in different places

[@jibbypoe1482]

Drop Top Performance gotcha thank you sir

[@goat_tingss]

Aye man! I got a ram 1500 5.7... would this work?

[@DropTopPerformance]

It sure will!

[@goat_tingss]

@@DropTopPerformance hey brother can you help me with my tune

[@DropTopPerformance]

@@goat_tingss yeah send me a message on Facebook @Drop Top Performance

[@goat_tingss]

So it’s saying fail when I try to write it to my ecm

[@goat_tingss]

@@DropTopPerformance I don’t have Facebook! Email?

[@detroitrebuildz5748]

Can you do this on a v6 ?

[@DropTopPerformance]

Yes you can, but you'll have to figure out where the sweet spot if for the negative timing

[@jakekola9265]

How do I make it more aggressive

[@Rick2k23]

Go catless

[@jaredweiss9215]

I hate the stock deceleration. To bad tuning voids my warranty =(

[@DropTopPerformance]

Dang buddy I'm sorry! Better keep that warranty tho, that's a good thing to have while you can with these cars

[@Suckmyring]

Cant you just keep your stock tune file from the factory and reinstall it when you go into the dealer, they dont need to know.

[@brianasf4005]

did you need to get a new ecu for this

[@DropTopPerformance]

No Hptuners allows you to modify the tables within the stock ECU

[@armandogomez7882]

Playing around with the tables but I cant get it to work :(

[@DropTopPerformance]

Go to your minimum spark table and make sure where your negative timing is in the base spark table reflects into the minimum spark table.

[@armandogomez7882]

@@DropTopPerformance I ended up reading another comment that said that its all working now thanks bro

[@gerardoaleman342]

Can you get this done at a shop?

[@DropTopPerformance]

If that shop has a tuner there that knows how to use Hptuners then yes

[@JSanchez-jl7qn]

help how do i contact you

[@Havoc745]

Cats on or no cats?

[@engineermira8587]

Thanks for your video Actually its a great pops sound, I’m planning to apply it on my 2014 charger srt 6.4 is there any side effects on engine life?

[@DropTopPerformance]

Driven 20k miles no issues

[@engineermira8587]

Perfect brother

[@user-eu7po6fh8b]

So sick bro deff thinking about doing this 🔥 witch one do I specifically buy ?

[@DropTopPerformance]

Thanks for the support man! You can buy the MPVI2 you don't have to get the pro version to save some money

[@adamwarnek3938]

I need help

[@DropTopPerformance]

Send me a message on Facebook @Drop Top Performance

[@TrevorNet]

Jesus H(emi) Christ! It’s a HEMI, not a Honda. If all you’re doing is sitting around in TacoBell’s parking lot revving your engine, by all means, make it pop to your heart’s content. Just be prepared to pull away from the green light with the rest of the Siennas. There are plenty of modifications that _are not_ hacks that will increase the presence of your car. Why would you want to dump your fuel into your overheated exhaust system in what should be a sweet spot in your RPM table? And I’m not even going to touch the transmission issues this will cause. If you want a better sound, drop the stock pipes and install a throaty-ier set. Enough said. Enjoy your parking lot & remember to tell the ricers hi for me!

[@DropTopPerformance]

You would be surprised the amount of people who ask me to tune this into their tune. So I made a video on how to do it🤷🏻‍♂️

[@installme101]

Can this be done on a 2010 charger 3.5l?

[@LT3Fluffy]

Hope you're not running cats. Gonna pop them right out of the back

[@DropTopPerformance]

Yeah well this was when I was in Germany I didn't have a choice lol but now that I'm back in the states😜🤫

[@miguelchavez6060]

Can a 2006 charger do this lol

[@DropTopPerformance]

Should be able too, I dont know all the tables on that ECU

[@wyteboii3688]

This literally did nothing as far as flames or pops

[@3vshhnefty664]

Bro that shit was not popping my srt8 pops more than that on a straight pipe. 😂

[@DropTopPerformance]

*Gif of Dr Evil saying "Rightttt"

[@melissakasper1772]

Nice sounds good i know what im getting my husband for Christmas👍👍

[@RayanAhmed]

You Forget to get rid of cats It well make the pops more nicer and aggressive

[@DropTopPerformance]

You're absolutely correct! However at the time I was in Germany and couldn't run catless

[@Rtcam345]

Yeah i like watching this guy

[@yournextcarcarreviews6375]

That is soooo sick!

[@rEaLmErK88]

Subscriber 386 here Where are you located? I have a hemi for you to check out to give you ideas and content

[@DropTopPerformance]

I live in Germany and you??

[@BeanieMan252]

Love your vids bro, any downsides to this?

[@DropTopPerformance]

The only one would be if you still have cats it could ruin them over time.

[@danielschmidt3446]

I did exactly what you did and the engine kept getting stuck a 4krpm when revving....

[@bobberttv8565]

I know this been forever ago but I God I love the sound of this hemi. I need all of this in my life

[@DropTopPerformance]

Yeah I have made a lot of changes and updates to the tune. Sounds and performs sooo much better!

[@dasllamas]

Nicely done! Thanks for the instruction