How To Motovlog: Helmet Setup!

[@BlockheadMoto]

I'm glad this video has helped so many people over the years! Checkout the updated video for 2022 here! - kzbin.info/www/bejne/Y4fHcqCYj9-WmpI

[@RLMDesigns23]

Some of the best audio I’ve heard When you talk quieter it’s better. As you get louder it sounds like it breaks up a little but not bad at all. Exhaust is great also. Very clean. Wind noise was very minimal. Only recommendation is a dead cat for the mic. They have them on Amazon. I’m setting up my helmet this week. Hopefully mines as clean sounding as yours.

[@Petesmotoadventure]

Good job blockhead. Good audio quality. Nice to see another Florida rider with KZbin success.

[@BlockheadMoto]

Thanks! 👊🏼

[@m.kvlogs4697]

Sub My channel

[@motorman857]

How do you get the sound from the bluetooth communication device into the mic on the GoPro? Is the GoPro mic just picking up the other riders voice from your ear speakers?

[@VlogCity]

How does this setup work in the rain?

[@dockly9202]

Please do an updated video of this with the go pro 8 if anything changed with that setup as far as materials used and whatnot. Trying to order the stuff for mine right now as well

[@Andre-Mostert]

I have now sorted out all the kit and did my first ride. Was awesome and I hope to do loads more. So much fun and thank you for getting me going.

[@JohnBehring]

Nice clean cam setup, props.Thanks for including the test run at the end too. Sounds good.

[@JuanTorres-qb5ob]

before this video I always liked to imagine that your helmet was a block head like your logo.

[@lauragillis526]

juan torres That would be hilarious!

[@BlockheadMoto]

You wouldn't believe how long I looked for a squared up helmet, lol

[@lauragillis526]

BLOCKHEAD lmao

[@BrianWood]

Is this a gumby reference?

[@matthewsalvador9783]

I’m sure now, some companies would do customs helmets... I mean anything is possible nowadays.

[@ThePricansaint]

Wanted to thank you. I have been watching your videos and although I am not VLOGGING, you tip with the buckle has been a blessing!! I ordered and installed it to my helmet and it has been such a game changer!! Thank you again for the great videos!!

[@sunseeker8457]

It get the adapter to sick to the glue adhesive. Use some sandpaper to rub away the surface of the adapter where you want to sick it. works like a charm.

[@GreatOne2009]

Just bought the whole set up. $380 for all products you linked (As well as the Sena SMH 10-10). Spent $125 on the Bell DLX Qualifier without the sena cubby mount location. Spent 150 on the GoPro about a year and a half ago... so yah. Quit a bit of money to be able to begin Motovlogging

[@rosmotovlog1357]

Bro, it's been 3 years. You should make a new one with current tech.

[@rebel_ltz]

Video idea, Blockhead: HOW to ride safe and stay vigilant. Safety tips, like keeping the high beams on and such.

[@BlockheadMoto]

lol, love it! I'll add it to the list :)

[@rebel_ltz]

It's super cool you answered. Have a great one! :)

[@ineedalaught]

Awesome, Blockhead! I just moved my mic to the cheek pad because it picked up my breathing like crazy! I haven't tried it out yet, but I hope I get the same results as you!

[@BlockheadMoto]

Here's hoping! Should help a lot

[@ricardoruiz6612]

hey blockhead if you use the zip tie instead of cutting it twist it off at the base. it will prevent you from having to use tape. hope this helps

[@riderrohith6141]

Which gopro is good for vlogging bro pls say

[@forrestculver7301]

Thanks for this video. I got a GoPro for Christmas and I’m finally going to put it to good use. Probably no vlogging for me. I just want to record my rides. The camera on the helmet combined with my tall stature and my bikes small stature makes for a great view

[@mrdirtdart2239]

I mounted the GoPro Hero 5 to my Icon Variant helmet with " Sugru. " It is a mouldable glue that comes in a variety of colours. WAY stronger than the 3M double sided tape! Got it on Ebay and it is cheap as hell.

[@GoonRides]

Does the Giant Squid mic just plug into the adapter? Or would you need another adapter for the 3.5mm? That’s what I heard on KZbin haha

[@Kornholeeoo]

Cool video. I have a Silver 4 on my Schuberth. One thing I find helps a ton is to go ahead and link up the camera to the phone so you can see the angles before you snug everything down. I leave the screws just tight enough to hold it and adjust the camera while wearing the helmet to get the best angle, then tighten them up. Thanks for sharing your setup. Pretty cool!

[@pilkjaer]

Great video! Any particular reason why you haven't places mic om the left side? Then your probably could route it even more cleaner.

[@hagarthehorrible1391]

I've heard that if we record using the audio adapter and the quick capture mode, audio doesn't get recorded. I love the quick capture while riding. One press to start recording and one step to stop. I want to use the audio adapter going forward. How do you manage the turning on the camera in this case? Turn on using the Mode button and then press the shutter button? In that case do you turn it off by pressing and holding the Mode button?

[@Pitseolak1]

How do you factor in communication systems? Two mics?

[@jeffy3915]

You could use a mic splitter

[@DieselLegiance]

I am just starting to get into motorcycle flogging. I have tried two different helmets, several different microphones, different wind muffs, different mic placement inside my helmet and I cannot get any good audio out of any of them. Do you have good audio with no wind noise and clipping and muffed voice right from your setup or do you have to fix your audio in post edit?

[@TheMiraldi]

Why did you blur the bell logo on the lens when you were checking if the lens closed with gopro in place?

[@octanehighs6378]

Thanks! Ever had problems with the 3 M pads? I nearly lost a camera due to detachment in 40 Celsius. It was suoer stuck up to them and some theorized it would be above the adhesive operating temp..... anyway, do you employ a safety lanyard and ever had issues with the mounts detaching?? ( yes it was clean surface!) I s’pose the accessory attachment may give you a life line and it is in your field of vision ( mine side mounted originally)

[@robthesamplist]

Another external recorder placed under the seat will catch the exhaust noise and you can edit it in and out will make much more entertaining vids..

[@thefilipinothunderjad6568]

What up blocchead!!! Thank you so much for these videos!!! I’m getting my first bike/harley in September... should I buy it used or new? Pros and cons? Any other tip???!

[@Typhlosion100]

Can you show us how to have the audio from the Sena into the GoPro for videos?

[@sharktank5424]

just bought a new AGV. love the helmet but neither gopro mount will sit flush. trying to figure out the best way to fill the gaps between the mount and the helmet.

[@001jaykay]

I got the same helmet, great fit and looks awesome, but the wind noise is a bit too much

[@HovakMusic]

The GoPro setup looks very neat and clean, but the mix sounds distorted because it’s a shitty mic. I would suggest to invest a bit more and get a good lavalier mic from Sennheiser or some other reputable brand.

[@johnfitzgerald4274]

Great setup and excellent audio. Thank you.

[@rysobaszkiewicz]

I used some super glue on some velcro 3M stuff to get the velcro to stick to the adapter. Works well for me.

[@aa1bb2cc3dd4]

This is great just for the gopro setup, for standard driving video "dashcam".

[@thakurivlogs]

Good vlog brother kee it up

[@TheeLadiesMan]

Is there an adapter for the GoPro Hero that is bluetooth so if you have a bluetooth helmet that you can use the audio that way?

[@JeffSimpson101]

Is there an update to this video for current products? I love how your audio sounds when you record.

[@CaptTwo6]

First time watching one of your vids...awesome job with very good instructions. Within 5 seconds of your ride I was like "he's in FL" lol. I am from the Tampa area originally but stationed in Japan now. I will start a moto vlog series as soon as the mic adapter comes in. Thanks for sharing!

[@onemeaningsome3580]

Very nicely done, Block! (as always) The sound seems louder (clear/in a good way)... maybe it's just the positioning of the mic and the new helmet (different surroundings/acoustics). Thanks for sharing a glimpse into your setup!

[@BlockheadMoto]

Thank you! Yeah glad the sound comes across well, definitely easier positioning it in this helmet vs my HJC modular. Perk of a full face and cheek pads!

[@motorcycleden]

Thanks for the video! Mrs Den and myself record dual vlog (rider-passenger) and we did use an external recorder which sounded great but was a huge pain. We switched to sena audio pack which doesn't give us very good quality. I think I may go your route and pick up a camera for her, so she has a seperate mic. Not sure which way we want to go but thanks again for great info.

[@CreepyLemon25]

Hi! Just wondering why the labels on the visor were being blurred out at 6:01?

[@willnanney7789]

Hey Block, I might be missing it, but have you updated your Moto log setup? This video has the hero 5, but are you still using all the same components for your current gopro?

[@fistbumpbiker4214]

Isn't it best to use an external mic recorder?

[@MrSKOHC]

So I had to find this vid again (first full face helmet since the 80's (don't judge me). "let me see if I can make out what Mr. B used so I can duplicate"... I said to myself... then BOOM! You had everything in the links! You are amazing! thankyou! and love the vids of you and Ms. B riding and the journey she had from sporty to Soft Tail. then come the informative ones... just an amazing channel! thank you!

[@stllda909]

Where did you get you chin strap? I have one like that but mine is not heavy duty like yours. I love it though. Quick snap on, snap off.

[@rwooley4494]

Hey is there another video going over motovlogging with your modular helmet? I like having the modular but just cant seem to get the camera in a good spot other than the front and then you open it and the video is looking at the sky...

[@levip9828]

wow no windnoise so you don't have a mic for the exhaust right it's all recorded by the mic you have in the helmet?

[@bruhdamartinasty3636]

Nice video man. I'm looking to get into this. So that was over 3 years ago. I've seen that the Hero 8 has a "media mod" which would eliminate the need for a mic adapter., thank god! And I guess everyone is now using the Purple Panda mic, right? Thanks.

[@worcestersorcerer]

Just spent the weekend touring Wales with your setup. It worked very well indeed. Thank you very much!

[@eastcoastbrushworks6327]

Are you using a chest harness or are you wearing a second helmet with the GoPro mount to film this episode?

[@e115zombies121]

glad to see your sub count growing, stay awesome man.

[@BlockheadMoto]

Thanks man!

[@Ricky80838]

What if you extended a gopro headband strap and wrapped it around the helmet and tucked the mic adapter between the strap?..

[@profighter1234]

You able to vlog if you get caught in the rain after removing the side door on your GoPro for your mic or do you need to disconnect everything?

[@SooperMoto]

Is there another way to use a mic with microusb because it seems hassle to use the adapter

[@timothynguyen300]

Thank you for sharing. Considering this setup as a safety camera.

[@justinwhite9418]

Timothy Nguyen Yeah, me too, video evidence is a must as a motorcyclist.

[@capeRCouple]

only thing you done wrong was that you didn't heaten up the sticky side with a lighter...this helps it stick a hell of a lot better,you have to heaten it until the sticky part starts to sort of bubble a bit and you will find it will most likely never come off again

[@mjordan7411]

Do you have any video on set up and operation of the Sena communication used by you and Mrs Block?

[@bradylavy9592]

So what if I want a Bluetooth mic to chat with my buddy as well. Would that be a separate mic?

[@RidersUnited]

Do you feel foam does better job comparing to deadcat?

[@1lbofflesh900]

I have that helmet that transitions lens is a life changer

[@motokane2146]

Dude how about the hole on the usb side? Its open and can get wet when riding on a rainy day?

[@wilko527]

Which in the uk is most days.

[@lukuxider2000]

This is substantial weight to add for the helmet - not easier to just keep audio recorder in the jacket like zoom and record audio separate - helmet would be lighter if you really need camera on the helmet

[@BaggerBro]

Dude , i didn't realize how much work you put in to the set up. Super clean install!!!! Are any of the local block heads gonna do bike night with us?

[@BlockheadMoto]

Quite a bit of work man!

[@jaksidely7834]

how did you set up the duel talk with Mrs Block head on one of you vlogs you could hear you both talking

[@Yes-lq6id]

Just a question.. what is the best beginner motorcycle? Just wondering for when I'm old enough to get a license

[@bobbrownintruth]

Have you upgraded the GoPro on this setup yet? Just curious as I get quite a bit of crackle and pop'n on my similar setup using a GoPro Hero 7. I have tried 3 diff mics but at 65-70 mph snap, crackle and pop into the audio. Just curious if you had this issue and how you resolved it. (I ordered a Windjammer PRO Tour 2, but that is going to super suck in the hotter months.) Update: I see in newer videos that you changed out helmets and even have your wife's audio being recorded... can you make a video on how you make this happen? I am guessing your comms tie in somehow to the gopro?

[@SHIFT-ED]

I have been avoiding buying so many helmets because they have Dring... Sewing the straps outta the way would probably be a nicer option.

[@erickroyer]

Great video. I bought all the stuff that you suggested but I am having an issue because I do not have audio. It is set to Standard mic +. Is that correct for this mic? The only way I can get it to work is if I slightly unplug the mic from the adapter about 3mm. The problem with that is that if you touch it, it can start not working again. Can you think of anything I am doing wrong?

[@VVoltz]

Thanks for the video, as usual, very helpful and entertaining overall. That mic adapter brick is horribly big. As I understand the older GoPros did not need that, why do you think it was worth upgrading to the newest GoPro?

[@BlockheadMoto]

My pleasure! The older GoPros had much smaller adapters, better for motovlogging. The new adapters offer the ability to recharge while that adapter is still connected, through their USB-C connection on it. Why do I think it was worth upgrading? MUCH better and longer battery life vs the Hero 4, and image stabilization. Two things that won it over for me. Plus I can buy Hero 5 Black's at the cost of Hero 4's, so that influences my decision, too.

[@mickfitz76]

I got the same helmet. It's so good. The airflow keeps me dry like no other. Great choice.

[@somedudeona6367]

How loud is it? I just bought one as my first helmet

[@ambesa1]

I always want to put this setup with gopro, but since the camera always crashes, i have to pull battery out

[@iloveketo8916]

Loved the video. I have a Modular helmet. Can you tell me how you mounted the mike for your Modular helmet? Do you have a video for that?

[@cmhdwg]

Good stuff!!! What is the setup that allows you to do dual motovlogging? How does Ms. Blockhead's dialogue come through you to get recorded?

[@TonysGarage]

I setup my helmet using your video as a guide. Thanks so much for putting up great content.

[@BlockheadMoto]

+Tony's Garage Glad to help! :)

[@YNTGUNS]

This is the loudest helmet Ive ever owned lol. When I'm at high speeds on the highway there is a lot of windnoise coming thru my mic. Low speeds are fine.

[@BikerNic]

I like your setup a whole lot more than anyone else' on YT currently. This will help me to NOT deface my helmet for a mount.

[@BeardedBear22]

Hey Blockhead can you put a disclaimer by the Hero 7 link saying to not buy the Silver/White editions? I bought the Silver to start my channel and came to find out both the silver and white models of the Hero 7 don't support external microphones... Thanks bud and love your content! This guide is the only guide I recommend to my moto friends

[@MENACEWITHAMOTOR]

Do you really need the adapter to plug into a hero 7 and up or can I get away with buying the straight wire that goes into the gopro

[@DevanshGupta0705]

How to charge action cam while riding? Any particular charger used in helmet for cams?

[@CubanRider]

Sounds excellent. You gave me a couple of new ideas, I've been struggling with mic placement picking up some wind noise in my last couple of videos.

[@BaggerBro]

you in Orlando brotha?

[@BlockheadMoto]

Glad to help!

[@brandennguyen1129]

what kind the microphone and adaptor do you used? where can i buy it? that's help me a lots thank you bro

[@TacticalDingus]

i have so much wind that comes into my helmet for some reason, i even tried wrapping my lav mic with more foam but still all you hear is basiclly wind.

[@Bhuwanishable]

Hi Blockhead , I have a GoPro 5 black and the backscreen LCD is not working , can u help me out? There are no service center here in India. What should I do ?

[@richardspearmen9668]

Like the set up, I have to sena 20s. Can’t remember what the mic is like. Will it fit the GoPro mic adapter?

[@GRT1005]

Looking at getting the Hero 7 Black but the video looks no we're near as clear as your video when I have watched other footage from the Hero 7??

[@BlockheadMoto]

This setup isn’t with a Hero 7. My new videos have a Hero 7.

[@nur2039]

I bought a sj 6 legend. There is no way to avoid wind noise in sjcam.I notice from many riding vidoes that go pro does not create wind noise.is it true?please tell me what should I do? Can I go for a long ride with sj cam or buy a go pro?

[@tarokanashiro4523]

Hey man love the videos! Just a thought but maybe some lock tight, lock washers, or neoprene nuts on your replacement bolts for your GoPro mount. A little extra insurance that they won't loosen off while your riding

[@BlockheadMoto]

Haven't ever had the previous ones loosen up or come off in over 2,000 miles. I think b/c the mounts are actually plastic, they might absorb any vibration, plus it's stabilized for the most part b/c it's on your head. Not much vibration gets to the bolts. On Loctite note though, I move my camera around constantly, when putting it on and taking it off the helmet, so imagine it'd wear out kinda quick.

[@CptSlow89]

You could mount it directly below at the chin.

[@StuntMenLive]

This guy replaces Double D rings with some aftermarket clip-in mechanism? Do you not know that Double Ds are the safest helmet attachment out there and when you get use to it it's pretty quick to latch on.

[@moonstruckcreatives]

what happens when it rains? do you remove your gopro? since the side panel is exposed or the go pro wont be damage?

[@kell7195]

Great clean vid awesome, just got this helmet as well, did you find it noisy?

[@romanoangeles1830]

Thanks for your giving idea about how to fix camera in helmet.how about for modular how to fix the camera helmet?

[@didnthurt4077]

Have any issue of the 3M coming Off? Im kinda worried that my gopro might fall off while riding.

[@ZENUSSA]

Great How to video on this topic you've answered my question on motoblog filming however, What was your setup for filming this video.? I tried filming a video on a product the other day and was very frustrated on actually how difficult it is to make a good looking video of products while trying Video record it. Thank you for all your videos.

[@BlockheadMoto]

Settings for this video are my normal 'product' video settings: 1080p @ 60fps, Wide, Image Stabilization On, Stereo Recording On. Definitely difficult, just have to find what way works best for you. Cheers!

[@ZENUSSA]

BLOCKHEAD sorry less technician which camera are you using and what the hell is it attached to?? It's almost seems like your wearing your helmet while filming this video? I'm just trying to get started so looking for the camera and how you filmed it in this video. The camera had to be attached to your head some how....

[@danleethamracing1959]

Does water get in to the camera when the door is off where the mic adapter is plugged in?

[@madisonsgrandson6678]

I've seen other videos and the Mic door being opened up is a concern during rainy weather. I can't remember whose video it was, but they went without audio for a period of time during the video due to unplugging the mic

[@InfoMasiniGermania]

You said the Mic is Mono but actualy i hear stereo, how is that ??

[@philipolinger4574]

Great vids! I was wondering - how do you capture audio from your Sena (or other intercom)? Is the mic connected to the GoPro sensitive enough to pick up the Sena’s speakers?

[@city_escape]

Dude . it was really helpful for me who is seriously considering gopro 7 as a next cam but worrying about the way how to set. Thanks a lot bro. From korea.

[@BlockheadMoto]

Cool to be able to help out from across the world! Glad you found the video useful. Cheers from Florida!

[@kd8309]

Thanks - Great vid, and the angles were spot on!