How to Paint SPACE WOLVES for Warhammer 40k

[@dekai7992]

I vividly remember that scheme and all its incredible (especially at the time) conversions. Actually, I remember flipping through the Space Wolves codex of the time and that it contributed immensely to my awe of 40k and the striking, high-contrast 'Eavy Metal paint job of the mid-late 90s. Thanks for the nostalgia trip!

[@cultofpaint]

You're welcome, good times!

[@Dazron]

Very nice. Best tutorial I’ve watched on space solve painting combining air brush and hand painting. Lovely.

[@cultofpaint]

Thanks!

[@warthog45]

Love the classic look. I remember that article too.

[@cultofpaint]

Such a great article

[@davebul38]

Fantastic video. And brought back some good memories with the army painted by Kim.

[@cultofpaint]

Would have loved to see it in real life.

[@johnhanley5546]

Enjoyable and informative - the helmet really makes the marine.

[@cultofpaint]

Thanks, and yeah it's a really nice helm.

[@adamduffield7782]

Like the result, been looking at various space wolf painting videos and this really does look good, im starting a space wolf army (got the storm claw boxset, my son has pinched the orks, but got the space wolves left, so bought the horus heresy mk6 marines and a horus heresy tank, as theyre a homage to the old rogue trader plastic boxsets i had as a kid, so doing them as space wolves to go with the ones i have) so this has given some inspiration as to how to paint them.

[@cultofpaint]

Be nice to mix in mk6 for the nostalgia nod

[@alexjohansson1476]

Love the paintjob, really good retro Feeling 👌🏻

[@cultofpaint]

Thanks, that was the hope!

[@scottfiteni-gibson6453]

This is an awesome video and such a cool result! So much so that it’s made me want to start painting Space Wolves!! My Salamanders are going to be pretty annoyed - thanks for the content!

[@cultofpaint]

haha thanks. Definitely do some wolves.

[@hamzeyg3095]

that russ grey through the airbrush looks so much like the fang basecoat brushed on, super hyped as getting the fang basecoat in my country is the biggest mission, and i have a ton of russ grey on hand. wish me luck im going to be trying and airbrush for the first time following this!

[@rafalbronowski8124]

really like that , looking so simple but wow really like this paint job, they looking great.. I'm always trying to complicate my painting but this opened my eyes ,great stuff

[@cultofpaint]

Thanks Rafal, we love some complicated painting but for getting an army done you got to keep it simple!

[@mini-paintingpapa]

Fantastic job! Making the Sons of Fenris proud!

[@cultofpaint]

Thanks very much :)

[@torcmatrix]

GW Skavenblight Dinge works really well for me when doing the paint chip effect

[@theunknowntoilet3324]

Outstanding

[@ShinXyres]

Even if they're not an army I'm working on there's always something to learn from your videos! Eventually I'll work up enough courage to use that cult of paint airbrush I got lol.

[@cultofpaint]

Glad you're enjoying them! And also get that brush out! It's very user friendly.

[@danncozey]

Loved this, thanks dude

[@adamduncombe594]

Yes mate! This is fantastic love this style.

[@cultofpaint]

Cheers dude!

[@taxman3749]

I am angry this looks so damn good.

[@jdm090020]

Great video! I am working on my first Space Wolf army and basically following this guide exactly! Question though, I got the Vallejo Poly. Gloss, and it seems a bit thick.. Can I use normal Airbrush thinner with the gloss varnish, or should I use something else to thing it? Water?

[@Adamslee72]

Another great vid again funny enough I just got Ragnor Blackmane today kutgw I'll follow this tutorial cheers 👍

[@cultofpaint]

Brilliant new model.

[@OriginPainting]

Nice use of the oil pin lining 😁

[@cultofpaint]

Thanks! 👍

[@nemhod]

Amazing paint job, love the style. Ever considered doing a Scythe of the Emperors?

[@cultofpaint]

Thanks! Love Scythes. Would definitely like to do some of the more obscure chapters.

[@jarroda2170]

Would love to see an army shot with all these individual models you've painted up for the different legions/chapters making up a single army

[@cultofpaint]

We'll definitely do a year one family photo!

[@theBoonarmies]

As ever, superb

[@cultofpaint]

thanks!!!!

[@richardbrown8789]

Ace!! Thank you!

[@cultofpaint]

You're welcome!

[@jrreedve2825]

For The ALLFATHER FOR RUSS! *Howls in feral*

[@deethom1987]

As always great video would live to see you do some deathwatch!

[@cultofpaint]

We'll add them to the list!

[@jonb2183]

Great job 👍🏻 Where did you get the helmets from?

[@cultofpaint]

Thanks! It's from the space wolf primaris character that is now included in the new Combat Patrol box. Was previously in one of those big dual army boxes.

[@The_Gamer_DaD]

lol i still have all these old sets :) The new mini's are so much nicer. BUT still, i got the old metal ones and i like em hehe

[@geekchroniclestv]

Superbe fig gg nice j'adore hum ^^ ^^ !! !!

[@cultofpaint]

Thankyou!

[@jkillerb]

i cannot wait to see world eaters :D

[@cultofpaint]

Definitely need some more chaos!

[@atothe40khomeboi]

Great job! Are there any plans to tackle a Drukhari model at some point? I’d love to see the CoP take on them

[@cultofpaint]

Those would be great fun, still one of the best looking ranges from GW

[@Carltheblackone]

Why do u apply varnish after the grey layers? English isnt my mother tongue so sometimes i dont get what u say in the videos. Thx mate!

[@cultofpaint]

It makes the pin wash easier. ( wash flows into recesses better and is easier to remove mistakes)

[@davesatterthwaite1239]

Awesome work - I have some SW that have been undercoated with Russ Grey, what would you suggest to start airbrushing from there with?

[@robsonez]

Black. Redo the primer and paint them a different colour. Don't use the horrific space wolf grey colours.

[@Sir_Gonzo]

After you airbrushed the shoulder colours, how did you paint in the grey trim? Did you mask the yellow and red, or brush paint in the trim? Thanks. Love the videos. I'm a new wolves painter and really like your tutorial.

[@cultofpaint]

Brush painted. Followed the same steps, just with a hairy brush. So basecoated Russ, then highlight fenrisian, then highlight fenrisian/ulthuan. If you do it the same time you are edge highlighting the rest of the model it isnt too bad.

[@Sir_Gonzo]

@@cultofpaint Thanks, I'll give it a shot. Cheers

[@stevefredericks1645]

How much should you thin the paint down if you use the citadel air versions?

[@cultofpaint]

There isn't really a golden ratio. I'd suggest starting 50/50 and then adjust from there to where you are getting the desired effect in a couple coats.

[@gillfishy87]

Where did you get the head pelt from? Looks awesome

[@cultofpaint]

thanks, it's the alternate head from the leader in the Combat Patrol set

[@adhdengineer]

I've got a badger 105 arrow, a sotar 2020 and a H&S ultra with some infinity bits added and I still want to get the cult of paint infinity. I may have to admit I have a problem.

[@cultofpaint]

The problem being you don't have the CoP Infinity yet right?

[@adhdengineer]

@@cultofpaint exactly. It's nice to be understood, every time I try to explain it to the wife I get blank looks or muttering under her breath. I've tried to compare it to shoes but still no progress

[@Wingnut53]

What is the thinner for the Windsor newton paint? I can't quite make out the name. I've never used oils before but I wanna try pinwashing

[@cultofpaint]

Sansodor. Odourless artist grade mineral spirits.

[@HeadHunterSix]

I don't want to sound nit-picky because this is a beautiful model and far beyond anything I can do... but the decal you applied to the right shoulder is a Long Fangs symbol and this of course is a Blood Claw.

[@cultofpaint]

That's ok, these recipe videos are much more about how to create the colours, there's probably "accuracy" mistakes in most of them. Then people can go away and create as accurate representations of the fluff as they want. Or just paint something that looks cool to them.

[@noahward9445]

Is the yellow dag on the red shoulder part of the decal you applied or did you paint that on? It just suddenly appeared when you jumped forward.

[@cultofpaint]

It's a decal. Yellow dag with the longfang symbol over the top.

[@noahward9445]

@@cultofpaint Thanks!

[@TopTableGaming]

Love this dude, 5 mins in what did you use to cover the armour on the arm youd already painted, when you tackled the shoulder pad? - Steve

[@cultofpaint]

Its camo masking putty by Ammo by MiG

[@kaibe5241]

Is the gloss varnish necessary when you're doing a pin wash?

[@stevefredericks1645]

Yes (from their other videos) the polyurethane gloss varnish reduces surface tension to enable the oil paint pin wash to flow as described.

[@philipplume6605]

What a great looking model. How long did it take to complete?????

[@cultofpaint]

Always tricky to figure that out when filming. But a squad of these over a weekend is definitely doable.

[@stevefredericks1645]

Is that retributor armor or relictor gold?

[@CrimsonTemplar2]

How many coats of varnish do you typically use before pin washing?

[@cultofpaint]

Approx 3. They are thinned 2-3 drop s of thinner to varnish.

[@PlatonistAstronaut]

Maybe not to my taste, but a lot of obvious talent.

[@cultofpaint]

Thanks James

[@TeHRank1]

I wanted your version of the infinity air brush.. But couldn't get it.. So I had to get the regular CR infinity plus! Sad times!

[@cultofpaint]

That is indeed sad times! But you still got a great brush.

[@Dannos3d]

With that varnish, can I ask what your dilution is for the brush please? Thanks in advance

[@cultofpaint]

approx 2:1 thinner to varnish. 20 psi. 0.4mm nozzle.

[@Dannos3d]

Cult of Paint regarding the white you used as a highlight. The Tamiya white? Is that just a standard white and the thinner? Sorry not familiar with that range so looking for a good white for the air brush

[@kaibe5241]

Where the pelt on the helmets from?!

[@devilsworkshopminiaturepai4180]

What sort of masking putty are you using there?

[@cultofpaint]

Ammo by MiG camo masking putty

[@whittaker007]

90s Space Wolves are 40k to me

[@cultofpaint]

They are awesome

[@mrmike247]

*looks at the airbrush* oh *puts paint brushes down* , I mean it still looks very cool ;-;

[@cultofpaint]

Thanks! You could still use the same recipe without an airbrush. ( the shoulder pads rims are hairy brush not airbrush, as are some of the highlights)

[@robsonez]

The light powder blue is horrorific and should never be repeated. The same as yellow included anywhere within the space wolves iconography.