Morgen you have explained the DPF topic very well. Thank you for sharing this info.
@blindliquor14 жыл бұрын
Finally!!! A Regen video!!! Thanks!!!
@BrianPhillipsRC3 жыл бұрын
@ 3:15 - Good advice! Running a DK6010SE (and LOVE IT!) Reason I had the "Puff of smoke with thermometer" was I had been idling the tractor to warm it up for a long time as I filled the diesel... I was clearing some light snow, and wasn't planning on running it for a while, but I decided to run up the RPM's to 2000-2500, cleared the driveway and then pushed some piles back to kill to birds with one stone. By the time I was stopped at the garage door to take a garbage can down to the street, had thrown on the parking break, I noticed the "puff of smoke with thermometer" light disappeared - AWESOME! Thanks for making this video to help reassure what I assumed was happening. P.S. You can definitely smell that recirc happening! I suppose this makes sense given the stainless particulate case was probably red / purple hot!
@martinrademakers7624 жыл бұрын
My CK4010 regens approximately every 32 hours, and I always run it at 2300rpm during regen. Engine rpm's are your friend during a regeneration.
@hpduster89614 жыл бұрын
My NX5010 regens approximately every 32 hours as well.
@elwinsmead56914 жыл бұрын
I wish I could get 32 hours between regens the longest it's gone was when I first got it, went 42 hrs and has been down hill ever since along with a list of other things and my dealership seems to be useless they have taken it back to the shop 6 times and not fixed it yet and they have had it now for 2 wks and have no idea when I will get it back and I doubt it will be fixed,we bought new so we wouldn't have the headache of buying used what a mistake
@martinrademakers7624 жыл бұрын
@@elwinsmead5691 Wow, sorry to hear these issues. Try a different dealership for warranty and repair work. Its not the length of time for repairs thats a concern here, but the number of times you keep bring it back. Overall, most tractor dealers try to provide good service, but unfortunately some dealers just struggle to make competent repairs. A decrease in time between regens means your not running at high enough RPM's or your injectors or not performing properly. And just imagine how serious it becomes if you have both issues at same time.
@elwinsmead56914 жыл бұрын
@@martinrademakers762 I have tried a different dealership asked if I bought it from them and I said no and I got well take it back where you bought it. I run this tractor between 2000 & 2300 rpm most of the work I do involves the bucket and my backhoe but this tractor will regen and I will let it run its course and I have had it regen 20 min's later been doing this since new. I get about 4-5 hrs most times between regens and my tractor has no power when it does regen
@davehudson46073 жыл бұрын
I get about 25 hours between regens, just over 52 hours now. Trying a new higher grade Diesel fuel from Shell, we’ll see if it makes a difference.
@HomesteadWyoming4 жыл бұрын
Good info...the ck3510 book doesn't explain regen very well
@bradleyschmidlkofer30132 жыл бұрын
Great info. I thought my nx4510 had a problem. Thanks for helping figure out the issue
@michaelyancoskie4918 Жыл бұрын
Great explanation 👍 hope to see more 👍
@95BerrySt10 ай бұрын
Could you do a video showing how to remove the DPF system? 😎 Thanks!
@rogerboudreau84964 жыл бұрын
Thank you ! Well explain...
@zoodlezd97 Жыл бұрын
TM AG Tuning is pretty much the only company that can do a delete on these. It requires a bench tune, the ECU to be cracked open and read from contact points on the PCB itself.
@bullrambler2 жыл бұрын
Thanks for the info on the regen cycles. I noticed this tractor had wide turf tires on it. Is it possible to get wide Goodyear / Titan Low Sidewall (LSW)Tires and rims on the larger Kioti Tractors...?
@mr.redneck27154 жыл бұрын
I have a tier 5 and experienced two regens so far. I did the parked regens but don’t think it more than 15 minutes.
@kevinnguyen94304 жыл бұрын
When regaining, does engine hours still go up?
@mr.redneck27154 жыл бұрын
@@kevinnguyen9430 yes
@davehudson46073 жыл бұрын
What year? What model?
@mr.redneck27153 жыл бұрын
@@davehudson4607 it’s a CK 3510 2020 year.
@davehudson46073 жыл бұрын
@@mr.redneck2715 Thanks Don, how often does your machine need to regenerate? I have the CK4010, a 2020, only two regen cycles so far, a little over 50 hours.
@kevinnguyen94304 жыл бұрын
Just to make sure. The hour meter still goes up as you regen right?
@a.saintango13113 жыл бұрын
Yes your hour meter should increase anytime the tractor is running.
@alanskinner70313 жыл бұрын
Great info !!
@johnt9684 Жыл бұрын
Does anybody make a delete kit for the dpf system
@SacCityFD566 ай бұрын
I have a 2022 CK3510SE does Kioti make spark arrestors for their tractor?
@lostcreek1634 жыл бұрын
Does serviceability have a place in tractor purchase?
@davehudson46073 жыл бұрын
Probably should
@doroteovergarav16362 жыл бұрын
como se regenera el dpf del modelo kioti RX 8030 ya que no tiene boton de regeneracion se lo agradeceria
@ChuckNorris-ju5fn2 жыл бұрын
Regen is stupidest thing government ever came up with Wasting diesel for 40 minutes!..how efficient
@jayprettyman26348 ай бұрын
I have a similar Kubota, be aware the tiny diesels with the regen are pieces of shit. Manufacturer does not matter.
@justadbeer4 жыл бұрын
Lol - 12:09 - "use a propane torch to warm up your fuel filter"! That sounds like a Darwin Award in the making
@davehudson46073 жыл бұрын
More practical than Just Add Beer!
@a.saintango13113 жыл бұрын
Yeeeeeah I wouldn’t use a torch anywhere near fuel lines and electronics. Better to use a hair dryer and bring the unit inside to a controlled temp to help.
@Leumas2554 жыл бұрын
Is it safe to do a parked regen in a field?
@hellogoodbye31294 жыл бұрын
Its risky, I lit a match off my dpf cycle. Dry tall grass won't take much, saw a guy put a flex pipe up and over the brush guard.
@Leumas2554 жыл бұрын
I’m talking about short grass that’s been cut that it don’t reach the tire rim
@johnt9684 Жыл бұрын
Can you delete the Dpf
@mr.redneck2715 Жыл бұрын
My Kiote tractor was reGening every 40 hours but but now every 7 hours, what’s up?
@orchardhillfarmequipment4347 Жыл бұрын
Its definitely got an issue. I would contact your dealer. Could be a bad fuel injector. We have seen a few of those cause this issue
@jamest35524 жыл бұрын
To unthaw is to freeze.
@advancedwifinetworks4 жыл бұрын
During a regen, tractor does not loose any engine power
@QuintinJohn4 жыл бұрын
lose not loose
@littletruckerkennelminiatu34684 жыл бұрын
Sounds kind of screwy kioti will not let end users read the codes off the tractor
@orchardhillfarmequipment43474 жыл бұрын
Little Trucker Kennel unfortunately most all equipment manufactures do the same thing. As the programs and codes are total different from the car industry.
@martinrademakers7624 жыл бұрын
You can read the codes, but knowing what each code means varies from tractor manufacturer to manufacturer. Just like Ford, GM and Toyota all have proprietary codes.
@dsarti14 жыл бұрын
@@martinrademakers762 No kidding it's kind of screwy that you can't get and open code to find that when a wire has a loose connection to a sensor 1/2 to bring it all the way to the dealer costing time and money just because a wire is lose
@mamaulmer23104 жыл бұрын
I agree. My Kioti zero turn says ERROR 44 when I try to engage the PTO. No one can even tell me what that means. It's brand new, haven't even gotten to mow my lawn yet and now I can't 😡
@job38four102 жыл бұрын
I wish there was a straight to point regen video for ck 3510, you need to say neutral atleast 15 more times!!!!!!!!!!!!!
@jakemarshall99263 жыл бұрын
How can a DPF be over 100% full? Asking for a friend…
@a.saintango13113 жыл бұрын
Daedong …. The metric system. 🤣
@jayprettyman26348 ай бұрын
I heard the quote “you’ll never have an issue” cmon man…
@dsarti14 жыл бұрын
If the code reader from AutoZone will not give the correct codes off of the code reader why doesn't coyote sell a code reader for the end-user to pull the codes? After all we paid tens of thousands of dollars for the tractor but you're not going to let us read the codes to find out what's wrong with the tractor? Are you really selling us the tractor or just renting the tractor. When my warranty runs out if I cannot read the codes to find out what's wrong with the tractor I plan on hiring an attorney to sue your ass because I paid over $25,000 for a tractor and you're not going to let me read my own codes? Sounds like a class action lawsuit to me
@job38four103 жыл бұрын
When tractor is all paid for and off warrantee, rip the blanking tear 4 crap OFF!!!!!!!!!!
@tfisadog52604 жыл бұрын
Really! Sliding the tires on the Kioti Not the most safe thing to do. Your product is good but I use Hot Shot Secret in all my diesel vehicles. It improves performance and mileage. They even have real people that answer the phone if you have questions. Turn your hat around and look professional otherwise informative
@dethmaul Жыл бұрын
Get to the point. I've skipped to 4 minutes, sitting on my tractor, and no how-to.
@zoodlezd97 Жыл бұрын
Just call TM AG Tuning and delete all that bullshit.
@jayprettyman26348 ай бұрын
Looked them up they are Canadian…. Would love to have someone that could fix my Kubota
@zoodlezd978 ай бұрын
@@jayprettyman2634doesnt matter, TM AG Tuning can do it
@thedude46322 жыл бұрын
Your little speed and slide , wouldn’t buy anything from you . If you don’t care for your equipment wouldn’t let you touch mine!