HOW TO REPAIR PEELING CLEAR COAT

www.paypal.me/...
www.walcom-usa.com

[@mikewood3528]

Excellent work! Your gun work has the three most important components: 1) consistent speed each coat; 2) consistent distance each pass; 3) consistent atomization at the tip. I promise you folks, it’s not as easy as he makes it look! Great job, Bro!

[@PHARRAWAY]

Thanks brother

[@samdavis1228]

Say to yourself, “I am a robot”

[@PHARRAWAY]

@@samdavis1228 LOL

[@zombie21boy]

PHARRAWAY where are you located at brother.

[@markanthony976]

How long in between every coat? Is the nozzle setting the same on every coat with the same psi? A when does the light mist c control coat go on ,is it the colour just before the clear?

[@lowridingtrucks88]

DAMM!!! Steady arm , even distance on contours this guys like a Robot. Professionall

[@PHARRAWAY]

Thank You brother

[@garylivingston9052]

This is anything but professional, i have been a painter for 30 years and this is a quick hack job! in a garage?

[@gstacks510]

@@garylivingston9052 stfu

[@hunkydude322]

hows the saying go practice, practice and more practice.

[@brettfranklin2634]

Sooo much better and easier than the "professional" videos that require hours of sanding and resanding. You do a TERRIFIC job while also being efficient with time. Finished product looks AMAZING!!

[@PHARRAWAY]

Thank You

[@soppingwetburgers6493]

It's short term paint jobs.

[@douglassiever7017]

It looks fantastic, no doubt about it. The quick dry tool is quite amazing too. One thing that would've been nice to see is the final stage where you light sand the clear coat then buff it to give it that factory finish look. Other than that, a great video.

[@zachmedeiros4163]

Badass job man! I used to work in a boat/yacht paint shop in the marine industry and this is the best video I’ve seen so far on the proper steps and technique on a paint job. Sometimes I miss making things look so pretty. I really want to paint my old 98 Silverado but I don’t have the money or space to do it.

[@rae0521]

This is far more than a "repair."

[@harleyjune1233]

not a repair at all - this is a repaint 100%

[@cuh2603]

On god

[@swizzlecuts5004]

In chanclas no less...

[@hunkydude322]

it's a repair not a complete through paint job per say, cause he didn't sand till he hit bare metal some of you didn't notice that he only sanded to the level that was bad he didn't have to sand till bare metal, for those in the know.

[@wildestcowboy2668]

@@hunkydude322 I'm glad you told those Joe Biden loving gun banning clowns off

[@bigrobbo7874]

Absolute Eye Candy. And motivation to get off my butt and paint mine. You got skills bro.

[@PHARRAWAY]

Thank You brother

[@sgnt9337]

That gun puts down paint very nicely. Interesting video.

[@TheSunnyTrails]

SGNT it’s all technique and setup brother

[@samgentile7494]

Everything looks easy when you know what you are doing. And everything is very difficult when you do not know what you are doing. Great results as shown are all about the time and efforts that went into the prep sanding work

[@PHARRAWAY]

Thanks

[@homersimpson3136]

Spray from you to the middle then walk to the other side and spray from the middle to you. You never want to give it anytime at all to dry from the first stroke or you'll see a dry strip in the middle. It's a timing technique when it comes to chemistry.

[@lucashearne]

Great video. I was only going to watch a few seconds to vaguely see how clear is repair, then I watched the whole video.

[@PHARRAWAY]

Lucas Hearne Thank you more to come

[@knined46901]

@@PHARRAWAY I did the same thing and kept watching. Just wondering if its possible to do it with the hood still on the truck? Great job. I don't have the setup like you do. Compressor but no gun, and other items. Help?

[@PHARRAWAY]

@@knined46901 Hi brother yes it's possible to do it with the hood on, and about the gun, you don't need an expensive gun Harbor fright sells one for $9 and it will do the same job.

[@knined46901]

@@PHARRAWAY What are the supplies needed to really get started? I want to give it a go and restore the clear coat on my hood. There are a few spots where I need to put filler I guess. any suggestions

[@PHARRAWAY]

@@knined46901 can you email me some pictures at [e-mail] so I can see the hood and I'll make you a list

[@erik-rf3ku]

You are professional brother And you can find easy job any where you want And can teach others because you are a pro...

[@PHARRAWAY]

Thank You brother

[@robbysspeedshop5990]

Really good job! You know what are you doing. Excellent gun handling, sir!

[@grahammay4727]

Great work and instruction and without all the swearing that most seem to think is necessary.I now can show the grand children.

[@PHARRAWAY]

Thank You brother yes I don't like swearing

[@Scott-NCC1701]

Based on the facility and job at hand, this was excellent work. Primer sealer is excellent for uniformity. However, since this was a dark color, it worked out fine. Nice technique with the paint gun. Above average skill level here.

[@Robert8455]

Something really satisfying about seeing a professional in his game. Nice works!

[@PHARRAWAY]

Thanks and God Bless

[@Anotherdaynparadise]

Is that a Mexican spray booth?

[@misterlexx2721]

No. Puerto Rican. 😅😅😅

[@12luv365]

You just be knocking it out of the ballpark Iam learning a lot from you, keep up the good work!

[@kevinbaird7277]

It is possible to make a good living just painting faded car paint, then selling on, easy, $1000 investment and start making cash, excellent work. Thanks for posting.

[@hunkydude322]

yeah, but if the whole car doesn't need it your just wasiting your money and time .

[@jonathanjones8044]

What a craftsman-truly amazing results. And what a match color wise. Bravo!

[@PHARRAWAY]

Thank You

[@macgyver15147]

@4:02 Don't force dry paint with air. You will dry the surface making it harder for the lower coats to release their solvent. That can lead to more runs or solvent bubbles being trapped. Solvent bubbles look like soda bubbles

[@macgyver15147]

Also the desiccant can be spread out on a cookie sheet and left in the sun to dry out. No need to buy more.

[@lb-innovations]

He's using waterborne paint... that's the dryer you use for waterborne paint.

[@dreamkiss4u]

actually that all depends on if you are painting with all one in paints that are like spray cans since they have multiple things not just paint in it but also some clear in it and hardener but paint alone with a really good gun and the right pro guy to do it you wont have that issue.

[@homersimpson3136]

@@macgyver15147 your almost right on the money, the only difference is that cold air is okay, it's just don't ever dry it with a heat gun then all those side effects occurs.

[@adamoneale4396]

As long as you do it on each coat from start to finish, it's alright. I wouldn't personally but it works

[@Slimey78951]

Thanks for taking the time to film this video. Nice clear explanation of your process. Keep posting.

[@Ruud1911]

almost seems to me that you did not repair the peeling coat, but removed it and than spray-painted the hood again.

[@PHARRAWAY]

Yes I did that is the only way to repair damaged clear coat

[@anonimous2451]

Perhaps you are referring to a blend repair of the clearcoat. That never works out well and is mucho more noticeable. He fixeeed it the best way.

[@Ruud1911]

@@anonimous2451 no I was not. It was a joke because he called the video "Repair"and not respraying hood and respraying the clear coat

[@anonimous2451]

@@Ruud1911 Alrighty then. Was giving you the benefit of the doubt. Whatever.

[@jkrende]

You know, this makes me feel good because I just bought the same air compressor to repaint / repair faded peeling clear coat on a GMC - the same body style GMC you're working on in this video. Guess I got the right hardware!

[@PHARRAWAY]

James Rende yes you will

[@carlford5287]

Nice video - You have a good calm, even way of teaching. Thanks for posting the video.

[@PHARRAWAY]

Thank You

[@evanpenny348]

Excellent. No airy persiflage. Right to the point. Well done.

[@PHARRAWAY]

Thank You brother

[@rubensalais1502]

I like this video, you go straight to the point.

[@stentonmcintyre5753]

I love how you cut through the unimportant stuff and show us what is important. Thanks

[@bruhbwoi3618]

The sound when you're spraying the paint reminds me of nails on a chalkboard but it's a great video👍

[@philmapockitz8216]

Great finish !! Your Kosmosky Robot Skills are on point...shame you didn't take all the way off & resealed the hood. When clear starts to let go,the remaining clear will eventually let go as well.

[@SprayWayCustoms]

Very nice job...laid down excellent

[@jeffreyalbrittain]

SprayWayCustoms you ever finish that box Chevy

[@djphx0001]

Hey bro, greetings from Phoenix Az. This is one of the only videos on this subject that is pro tip quality 👍

[@PHARRAWAY]

Thank you

[@zx6rdood]

How to repaint a hood**

[@jeffburger3686]

That IS how you repair peeling clearcoat.

[@mydv9305txdied]

@@jeffburger3686 Yep, only proper way.

[@USCG.Brennan]

@@jeffburger3686 That's what zx6dood is saying.....this guy is not "repairing a clear coat" he's sanding down and then REPAINTING the whole hood. And I'd HIGHLY recommend using a primer sealer before shooting the color on....it insures a smooth paint application with no "pin holes" showing up in the paint or other crap going on.

[@scootjourney5513]

@@USCG.Brennan stop hating its technically repairing SMH

[@ericrojas3200]

???

[@stonesthrow420]

WIth all these silly KZbin videos..man Its finally nice to see a Pro at work. Thanks for the video

[@OldJoe212]

Nice job. Amazing that there are so many genius' that make comments but don't have any videos. I'm in the market for a new compressor. I'm not going to do much painting, but I want to have the ability. What size/brand compressor are you using. Thanks for posting.

[@PHARRAWAY]

Thank You for posting the comment it's true what you said and about my compressor, I'll live a link about it kzbin.info/www/bejne/Z6G4nYGtbcqhjMU

[@colesnyder7640]

good job, I’d recommend wet sanding1500-2000 grit to smooth the clear coat out then compound it,clay bar, polish,and finally a wax to really make it perfect and protected.

[@PHARRAWAY]

Thanks good idea but this job was done about 2yr ago but good tip

[@josephlopez4419]

Wish you lived in Austin Texas , I’d have you paint my truck !

[@PHARRAWAY]

Not too far brother bring it down

[@mlinecomposites1]

Good video I like how you got straight to the point on the job, clean work

[@mattblack9069]

Lovely job done , plain and simple video on how to covered all you need to know.

[@PHARRAWAY]

Glad it was helpful!

[@roadstar499]

so you were able to level surface without spraying hi build primer on those spots where you have primer showing????? maybe it would not have hurt to spray those areas and then block sand first...

[@marksimpson9145]

You ain’t no Joke. That mixology n Gun work FIRE!!

[@markcrawford8876]

"How to repair clearcoat" , or you could just repeat this process over entire vehicle, and I think that's called a "paint job"

[@hunkydude322]

in a way yes, but i don't know if you noticed but he didn't sand till he hit metal he stopped at the primer stage.

[@randyrasmussen8031]

@@hunkydude322 that’s still a paint job lol u don’t have to hit metal to be considered a paint job

[@hunkydude322]

@@randyrasmussen8031 still he didn't have to go to bare metal so what's your point

[@randyrasmussen8031]

@@hunkydude322 are u special lol my point is literally stated but I’ll make it easy “ it’s a paint job not a repair”

[@vladiordache9701]

@@hunkydude322 why would you go to bare metal to repaint?unless you have rust problems, you don't go to bare metal,this is not a repair is a paint job of a hood

[@David_Creyke]

I would have hit that with some two pack primer and blocked it out but still you did a nice job and the pay isn’t always justified to do all that. I can tell you have professional level skill but are slightly limited by your air. It’s testament to your skill level that you have adapted your spray style for lower air power but higher overspray/lower material transfer because it’s a garage and not a dedicated downdraft booth. You’d probably do incredible work with out having to worry about clouds of clear etc. Most guys spraying diy aren’t doing waterborne color or spraying clear at 30 psi, it’s a single stage at lower pressure, easier to manage in a tight space.

[@elvisbest3213]

wow i have a 2003 gmc yukon that needs a paint job lol wow awesome work

[@PHARRAWAY]

Thank You brother

[@elvisbest3213]

@@PHARRAWAY you r welcome sir keep the videos coming

[@artsnow8872]

Even several coats of paint are translucent, not opaque. The different colors of the basecoat and clearcoat will show through under certain viewing angles. This is why you need a uniform color before the new basecoat / topcoat. You need a primer / sealer.

[@1hourwave90]

First time I saw this trick with drying paint. Super.

[@thomasficorilli259]

Have you never heard of sealer so that you don't have dark and light spots?

[@hunkydude322]

i think they make different color sealers for thoese that don't know.

[@michaelnaisbitt1639]

Nice work no useless chatter just information. Very good

[@psdaengr911]

I like the result. The two things that are concerns when painiting a panel off the vehicle are color and texture, and here it looks like new.

[@PHARRAWAY]

came out nice color match out perfect

[@dortot1]

The biggest challenge I see is matching the newly done hood to the vehicle that is not getting repainted

[@filibertobarrera3839]

I used to fix this by sanding with 220 then applying three coats of 2 k primer surfacer then wet sanding it with 400 grit then painting it.Yesterday I saw this video and decided to sand it with 220 then 320 finishing it off with 400.all dry sanding. The only thing I did different is I applied one medium wet coat of sealer.Just amazed at the time and material I saved.Been doing it the old way for over 20 yrs.😲😲😲😲

[@Oliverkousha]

I have a question, paint has to be dry 100 percent between coats? I think paint doesn't dry in 10 minutes between coats.

[@PHARRAWAY]

I usually let it dry for 15 min between coats and no the paint does not need to dry 100% if it does you will need to scuff it down to add the next coat so not recommended to dry 100%

[@Oliverkousha]

@@PHARRAWAY what about between clear coats?

[@PHARRAWAY]

@@Oliverkousha It's the same 15min between coats it just needs to be tacky not dry

[@Oliverkousha]

@@PHARRAWAY thank you for your help.👍

[@PHARRAWAY]

@@Oliverkousha any time brother

[@Kravin8]

Awesome painter, good example of quality and speed.

[@armunro]

You make it look so easy!

[@jhonedinsongamboacarrero7355]

Increíble, quedó excelente, muchas felicidades por ese trabajo !!!

[@PHARRAWAY]

Gracias amigo saludos

[@mohammedkarim7503]

Thanks brother I learned so much from you and i have one thing to tell you do the edges first then do the open areas

[@PHARRAWAY]

hama Chanel Thank You will do

[@Al-ok1lj]

Wow! I have a question though. Is the hood and roof more susceptible to clear coat failure?

[@PHARRAWAY]

yes it is

[@peetre]

Because it has the most direct sun explosure

[@scottfirman]

Very nice job. Looks better than factory!

[@PHARRAWAY]

Thank You brother

[@craignilsson4473]

That gun sprays like a boss

[@PHARRAWAY]

Craig Nilsson They are some of the best guns I have ever used love them

[@typesgsr]

pharraway what kind of gun is it

[@PHARRAWAY]

Gam Bini Walcom genesi carbonio 360

[@Imwright720]

So many people complaining about the video title. He fixed the clear coat by repainting the car and putting a new clear coat on.

[@PHARRAWAY]

Yes that is the only way to fix that kind of clear coat damage

[@alanroder2619]

Nice job so you used 3 coats base , 3 coats clear nice job looks great, I have same problem with my Tahoe hood and roof

[@GregHarland1]

You can paint my car anytime. Excellent work!

[@mikeb837]

My clear is gone. Its down to primer....and my roof has surface rust... its a 94 chevy 1500....any vids on that?

[@PHARRAWAY]

Yes I have some in my channel

[@mikeb837]

@@PHARRAWAY ok ill look tomorrow. Thanks!

[@tires2burn]

Good job. I always strip the peeling clear and seal. This was a quick fix but will come back when the sun cures it.

[@bobjons7]

I’m not a painter, but can you tell me why on your clear, you laid it a lot slower after the first coat? Great job...looks awesome! Sub added.

[@PHARRAWAY]

the first coat was for adhesion after that you need to go slower for the shine and thickness

[@harireddy2242]

Very nice technique, impressed man 👍

[@medicmike4906]

Please do a video of your compressor / desiccant setup... thanks

[@PHARRAWAY]

sounds good I will

[@caknelson2254]

And here I thought watching paint dry was boring! :) Great Job

[@outoftime788]

this is not peeling this is faded. mine is peeling. wat would u do with peeling? jus try n peel it off or sand it or blow it off with air?

[@PHARRAWAY]

some times blowing it off works but you can do the same as i did

[@sandrawinkleman6503]

I`m a 70 year old lady that loves to see how you work with an air gun. I have a 2002 P T Cruiser and the clear coat peeled up in spots on the top so you can peel it right up. My car has a paint job that came from the factory with a dull finish to it and not a shine to it but l would like to know if l bought a gloss clear coat can i sand down the dull clear coat and put a shine on her instead . l subscribed and rung the bell .

[@bradledford8877]

Because we have access to a shop with all this equipment. Thanks

[@PHARRAWAY]

You're welcome

[@jamesal-hamadani221]

Love your posts brother. Keep up the good work. I just started working on my truck after watching your videos i hope it will come out right! thanks again

[@PHARRAWAY]

Right on

[@sergeantmajordyi7049]

Great job. I'm a novice at this and I'm about to sand clear coat off my 2005 santa fe. My question is. I see that you use different psi for paint and clear. How is that determined?

[@ballsoutperformance]

Its all personal preferance. Sometimes I bump the pressure up for clear just to help break it up. If i up the pressure, i back off the panel a little more.

[@aaronwood3540]

Finally, someone that knows how to actually fix a clear coat. That's right people, you sand it down and repaint it. That's the only proper way to fix it. All the other crap you see on KZbin is just a bullshit patch job for cheap ass car dealers. For all you folks wanting to learn, this is how you do it. Nice job for sure.

[@pitlion1]

Would you happen to know the difference between urethane and polyurethane?It confuses me,whats better?

[@PHARRAWAY]

www.thecoatingstore.com/difference-urethane-polyurethane-car-paints/

[@simonbolivar1678]

YOU NEED TO SEE MY PAINT JOB ON MY PICK UP... IT CAME OUT SO BAD...NOW I HAVE RUST SHOWING UP ON THE TOP AND HOOD.... I BEEN CRYING FOR WEEKS... NOT EASY TO LEARN THIS TRAID.... THX MAN... ILL FIND HELP...

[@manuelsaldana2730]

You may then look effortless excellent video good job

[@PHARRAWAY]

Thank You brother

[@dazedink697]

Dude, that was awso......, wait, are you painting while wearing Chanclas. Lmao!!!

[@PHARRAWAY]

LOL Yes

[@dazedink697]

@@PHARRAWAY well , still some great work.

[@PHARRAWAY]

@@dazedink697 Thanks

[@williambranham6249]

Nice video, No BS, Excellent finish

[@hankgs]

Nicely done... I have a 99 Suburban where the clear on the roof is failing- I going to use Dupli-Color rattle cans and clear coat over the front driver/passenger and truck bed liner from the front of the roof rack back... Wish me luck! :)

[@PHARRAWAY]

You will do good brother

[@williambranham6249]

Luck

[@gusserth936]

I was gonna talk some crap because for cases like i always apply primer and block it then paint but tjat hood looks 🔥🔥!! Nice job

[@PHARRAWAY]

Thank You brother yes a lot of people have primer mixed up I have a video explaining when you need to use primer kzbin.info/www/bejne/gl6vk5Sijdt3b7s

[@tompawlak3482]

TRY THIS EASY BRUSH ON WAX facebook.com/1158197997/videos/10217634508312019/?t=2

[@ephraim.1964]

Holly smoke amazing work!!!. 👍🏽👍🏽

[@georgereekie6397]

Ephra bass Very good

[@ericrojas3200]

???...primer first if you gonna paint the whole hood...you just didnt repair is...you sand it down to metal....i use primer first....

[@melvincardines6519]

that wasnt to the metal..you can still see the primer

[@javanfigueroa9822]

Primer is an adhesive, for metal so paint can stick. There was old paint and primer and it was smooth no need to primer it. If he did. That could of caused a problem, the paint on the car could’ve been thicker than 12 mil and it can start peeling or cracking offf.

[@williambranham6249]

@@javanfigueroa9822 12 mil is 1/2 inch.

[@scarab280ze]

​@@javanfigueroa9822 Primer seals the open edges and should have been done first. this is a back yard job or a mobil repairman. DON'T follow this advice. Prime first seal the edges of OEM paint .

[@jwill9877]

@@williambranham6249 no actually it's 12 thousandths of an inch

[@venetiancat]

Nice video, well done and easy to follow. Looks really good too!

[@PHARRAWAY]

Thank You

[@projects-reviews]

Tried something similar to this with spray cans and it didn’t turn out how I expected it to nor did it turn out like yours 🤦‍♂️

[@mohammadfaisalchowdhury5505]

Your skills are just "WOW"

[@PHARRAWAY]

Thank You

[@number1pappy]

So basically your not "fixing clear coat" ,your repainting the hood!...title is kinda misleading dont you think??

[@thomaspartin191]

Lmao. Exactly..... With all of the hurry up drying and 6 coats of material, I bet it spider cracked inside a week. 🤦

[@PHARRAWAY]

that is the only way to fix clear coat that is this way

[@PHARRAWAY]

@@thomaspartin191 and this paint job has been on for about 3yr and still looks like new Thank You

[@number1pappy]

@@PHARRAWAY granted! But the title says "how to fix clear coat" ! Its misleading as your not fixing the clear coat! Title should have said how to repaint a panel that's paint is peeling or how to repaint a car panel or etc etc....

[@PHARRAWAY]

@@number1pappy True, Thanks

[@SammyEddie]

Amazing. Why did you go slower on the 3rd coat of clear? Putting more on it at the end or just coincidence? All the other coats seemed to be at a different cadence to me.

[@caithimhjoe2135]

Your a very good sprayer my friend. Happy christmas

[@PHARRAWAY]

Thank You Merry Christmas

[@silvergrizzly316]

Brother, that was an Awesome job!!! 👍👍BEAUTIFUL!!!

[@PHARRAWAY]

Thank you brother

[@justinrolon4643]

Think u can list the tools being used. Air lines to paint reservoir to spray gun to the area fan attachment . Etc

[@PHARRAWAY]

Will do

[@hunkydude322]

thanks for giving us some of your tips, and for those that supposedly know it all they shouldn't be on here.

[@Burn269]

I did a quick paint job on mine. I used 320. A sponge and water to wet sand it. Then rattle-canned. Paint only. Why clear coat a four-toned 1993 Civic

[@scottryan9845]

Very nice job I have to do my 97 chevy pickup myself thanks for the tips

[@PHARRAWAY]

Any time!

[@805Hitman]

Great video. Great skill. Can you do one video how to find the matching paint?

[@PHARRAWAY]

Yes I will

[@homayounshirazi9550]

I hope you had air mask on! You don't want Polyurethane to coat your lungs too. Good job.

[@PHARRAWAY]

Yes I always do brother Thanks

[@josearrvizo359]

Well job bro Good steady hand

[@bobsillas3553]

keep doing side work the low price of getting by cheap went out the window about 20 years ago honey the washing machine not working then it the frig. you do good work son

[@PHARRAWAY]

Thank You

[@saveriosalemme5366]

I can watch this all day !

[@wildestcowboy2668]

This Puerto Rican can paint, he is not a beginner so your job want look this good