How To Replace A Stihl Chainsaw Safety Hand Brake with Taryl

In "TJ VS. The Chainsaw" Taryl shows you how to replace the safety hand brake on your Stihl Chainsaw. Prior to the fix, Tim Burr from Timber Tree Service finds out how expensive having knucklehead employees can be. And There's Your Dinner!!!
***Stihl Models this fix covers are 029, 039, MS 290, MS 310, MS 390 ***
Find Taryl on Instagram and Facebook! Instagram: TarylFixesAll
/ tarylfixesall
Be sure to stop by the Taryl Apparel Online Store for all your Taryl merchandise!
www.tarylfixesall.bigcartel.com
Special Thanks to Zach Sessions of Russell's Tree Care for letting us use their bucket lift in this video.
#stihl #chainsaw #smallenginerepair #tarylfixesall #grassratsgarage #arborist #logging #treetrimming #tree #treecutting #funnyhowtovideos #safetybrake #brake #safety #stihlchainsaw #handle #timburr #taryldactal #taryldactyl #taryl #diy

[@dapperdann1]

Last week I ran over my chainsaw with my tractor, I ordered a new brake handle from Amazon for $12 bucks. I didn't know how to put it on. I came across this video not only did I get a good laugh! But it was very instructional and very easy to follow along with step-by-step. And now I'm back up and running. Thank you so much for taking the time to make and share this video, it's awesome👍🏻👍🏻👍🏻

[@trouserminnow10]

Awesome video... you gave me the confidence to successfully tackle this job. The chain brake spring reinstall solution was fantastic. Thanks very much!

[@nasirramli8658]

Thank you to everybody for good and nice tuition..

[@patrickpk6299]

Thanks for the tubing tip...awesome!

[@geojor]

very practical video, thank you for your efforts ...

[@ronc5386]

Great tip thanks for sharing it Taryl. You make it look easy but if you take your time and follow the steps you getter done so thanks.

[@petefroud5308]

As always great tips and tricks . The spring tool is so smart..

[@esickle132]

Awesome spring -put-it- back -together tip. Thanks much. 72 and still learning...!

[@peterp4319]

Taryl, that tube spring putting on thingy was brilliant. You don't know every cuss word I've spoken and twice tryin to get that spring on. Thanks TD !

[@captainpegs0740]

I been getting pissed off trying to get this MS361 together but the end of this vid, the ominous music at 11:28 made me lol, thanks.

[@johno2355]

Flash back Friday brought me here, good thing it did too,never seen this video. Lots of good tips on here.

[@nasirramli8658]

Thank you for good tuition..

[@ricardospanish2329]

Good one I'll try that next time, thanks for the info

[@MissouriOldTimer]

that was a real good idea using the tubing to put the spring on,, I imagine that will work on other spring applications..

[@MrGoosePit]

I like the tool tip. That will come in handy. Thanks!

[@patthesoundguy]

made my afternoon with that one Taryl. :-) Thanks

[@keithevans9785]

Sir, you are a motor wizard !!

[@FernandoRodriguez-ds5ri]

👏🏻 👏🏻👏🏻 That’s a special tool. The highlight should be on one of ESPN’s highlights

[@shanemackie1]

Mate your video made putting my brake handle back on so easy with step by step instructions thanks very much from Melbourne Australia 👍🏻🇦🇺

[@raymondcampbell2346]

Good job Taryl you make it look easy. I always like your Taryl's Tools. You should make up a tool kit for sale and add it too your merchandise for sale.

[@sandrosbackyard343]

cool tools you invent and design Taryl!

[@jonmyers8046]

By the way, thanks for another informative and entertaining video. It's always appreciated my friend.

[@nasirramli8658]

Me too.. I loved this channel..

[@caryhubbardfamilychannel7516]

Great video, Steve Rob sent me over. Great tips on the saw, LOL lot of video work. well done guys. Thanks Stay Safe.

[@gregmason6109]

The 5/16 spring tool was exactly the idea I needed

[@eugenefraser2016]

Great video,saved me $65,keep them coming

[@larryhardin3985]

Thanks! I was having a terrible time trying to get that long spring back on.

[@stihlnz]

Saved me some $$ Taryl thanks.

[@ScottLRoyal]

Tubing to the rescue. 9:05 Thanks Taryl. Now I can proceed with the utmost confidence that the only thing to deter my efforts might be the C clip going for a ride.

[@nheng6913]

Reminds me of the old Newhart show in Vermont, with brothers Larry, Daryl and other brother Daryl. But almost cooked my brand new machine and brake the other day by accelerating with brake on, so all good stuff in this video. Thanks !

[@robmaccormick3398]

Thanks! parts/action is similar enough to enable me to fix my broken chain brake handle on my MS660....(now if I could fix the truck I rolled......Doh!)

[@dennisqwertyuiop]

good stuff

[@billking2328]

Very informative and some comedy on the side. GREAT!!!

[@jamesmayers5468]

I love this channel

[@TarylFixesAll]

Thanks James!

[@chrischiampo7647]

Agreed 😀😊👍🏼

[@yannih1782]

As cheesy as that was, it was still very informative. Thanks as it helped me...

[@blagomir86]

nice video

[@booger37391]

haaa amazeing tool for spring ! ..even better than my brake pliers for cars .. I used.. ...well little bit easier... a lot simpler!!

[@SteveRobReviews]

Buddy that was real easy, only took me 2 hours and a bit of sweet talkin them parts but I got er done. Wish I seen this vid LOL

[@DIYVariety]

Is there a oil adjuster screw on a ms271?

[@WAVETUBE84]

That spring kicked my ass!

[@RustyGlovebox]

Steve Rob sent me by, new subber now. Thanks

[@FernandoRodriguez-ds5ri]

I have the 024 AV with the Electronic Quick Stop. I got it from a coworker. The handle is broke off. My question is will this saw start with the broken handle? Seems like he dropped a tree or ran it over with his pickup just like you mentioned on the video. Help

[@jonmyers8046]

I probably would have used an automotive brake spring tool, but I think your method has less chance of stretching the spring. Slick! Ha ha! I knew a guy named T.J. that used to have a tree service....key words "USED TO" He wasn't very good with equipment either. lol!

[@roxy-tj3jo]

What happens if you strip out the thread ? Do you know if their is a parts numbers for thread or do you know if you can use something else to keep the bolts in ??

[@Icehso140]

Very nice video. 30 ft drops will break that handle for sure. MS180 only has plastic pins on the little cover. Pry gently...it'll come off easily.

[@jimmyscoffield1988]

Just what I needed, Thanks a bunch!

[@brucewalker1908]

Hi I have a little problem. My handle/ grip handle I don’t know the exact name but can you make a video on how to reinstall it. My saw is a Stihl MS 180C farm boss thank you

[@ferel4787]

Poor T.J. lost his job, but I wouldn't worry the Carnival will be in town this summer and i'm sure he'll get work at the Dunk Tank

[@loniedavis1167]

I USE TO WORK FOR HARLEY DAVIDSON AND HAVE SEEN THINGS JUST LIKE THAT !

[@waynes.2983]

Mr. Burr looks just like my buddy who does tree removal for a living.

[@leastofthese2684]

This isn't what I was looking for, but I needed the laugh. Yall stupid...lol

[@raymondcampbell2346]

Hey Taryl check out the blade balancer Doublewide6 made on his KZbin channel. It is pretty slick.

[@joemoser6638]

The 5/16 tube was a great idea! Worked like a champ.

[@beekeeper7535]

Grass rats garage NEEDS A ROOF bad.

[@captainpegs0740]

Hello, I'm trying to put a MS361 together and I'm stuck. Where does the front end of the brake cable attach to; the S shaped end at the end of the wire? Number 15 on the exploded parts diagram: www.diyspareparts.com/parts/stihl/diagrams/ms-361c/2a8049b2-6779-4adf-a9db/

[@adamsantiago4541]

Buncha burly self reliant tough men. "Gotta wiggle it, itll come." *entire room of giggles*

[@reneproulx7564]

chainsaw lack off lube for chain on a huskivanah

[@kastbarg]

That little clip is called a "Juicy" clip. When you take one off you say "juicy where that went?"

[@engineer2001]

Oh man, that comment made me laugh. I have lost a lot of juicy springs too.

[@mattheweburns]

Nothing beats having ur work be interrupted constantly by other less-prioritized commands. Let a mofo work? Thanks for the videos, cheers!!

[@krrrruptidsoless]

8:41 Quick question; If'n you had a turtle could you feed that piece of pizza crust to your turtle? 😐 10:05.... Reminds me of this 👇 kzbin.info/www/bejne/gYa2YZJ-r8h9ZpI

[@ss365landscape4]

Lol

[@dandagerman6604]

Which piece is designed to break if you run it with the brake in the wrong position? Fk it, I'll just take it apart anyway.

[@michaelprah8408]

Stupid comedy but good information

[@massmanute]

never force anything. Get a bigger hammer.

[@tomvanaalst5790]

Would be a much better video without that stupid crap at the start.

[@rothweiler]

Enough of the corny skits, get to the show!

[@timcasteel3866]

Cringe-worthy and excruciatingly lame