How to Replace Engine Water Pump 2001-2007 Ford Escape

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEWP00091
This video shows you how to install a water pump on your 2001-2007 Ford Escape. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2001 Ford Escape
2002 Ford Escape
2003 Ford Escape
2004 Ford Escape
2005 Ford Escape
2006 Ford Escape
2007 Ford Escape
Tools you will need:
• Flat Blade Screwdriver 1aau.to/odw/1AXAA00013
• Pry Bar 1aau.to/oaD/1AXAA00020
• 10mm Wrench 1aau.to/oay/1AXAA00010
• 10mm Socket 1aau.to/ocA/1AXAA00017
• 15mm Socket 1aau.to/oc8/1AXAA00015
• 19mm Socket 1aau.to/obc/1AXAA00043
• 8mm Socket 1aau.to/ocA/1AXAA00017
• 1/2 Inch Air Impact Gun 1aau.to/oy/1AXAA00252
• 1/2 Inch Ratchet 1aau.to/obc/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/ocA/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oc8/1AXAA00015
• Socket Extensions 1aau.to/oc8/1AXAA00015
• Torque Wrench 1aau.to/obN/1AXAA00044
• Gloves 1aau.to/oD/1AXSS00048
• Safety Glasses 1aau.to/oA/1AXAA00343
• 10mm Hex Socket
• Drain Pan 1aau.to/oR/1AXAA00320
Subscribe: / @trq
Check out our playlist:
Ford Escape 2001-2007 1st Genereation: • Ford Escape 2001-2007 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@justinheatherly1905]

I have a 2002 escape and this is not where the water pump is. Mine is located on the other side of the motor at the top.

[@CountryBoyShane]

That is definitely a Michigan car. That rust is COMICAL!!!

[@rudeliorodriqueziii1090]

Is this the 6 or 4 cylinder engine?

[@jacobs7281]

Thanks for this video. Can you give the name or link for the pry bar you used lock the nuts from spinning on waterpump

[@salvadorvasallo3330]

Greetings, the video is very interesting. Do you have a video on how to change the time strap?

[@johnmclaren7059]

Nicely done ! Now to start 2024 replacing the pump on the wife’s escape! Only wish I had a hoist 🥲👍🇨🇦

[@gerrymiranda7003]

Can the O-ring be changed when only coolant leak is the issue….? ‘Appreciate advise. Thanks in advance!

[@privatename8888]

Thank you awesome video

[@jingersnap4912]

do you have to vent the radiator line when refilling the antifreeze??

[@Imam12377]

Thank you...

[@LilChiefakaStinson]

I feel like this is a 2.0, 4 cylinder. I have 04 with V6 and mine is located on driver side, with its own belt.

[@JhonyJimenez-hf3pb]

This is a 4 cyl.