Thank you for this. Beware do not use big zip ties they will cut the belt. I learned this the hard way. Use the size the guy does and you'll have no problem. Saved me 860 dollars.
@user-wv-6pds22 күн бұрын
That was a a very good work. Specially working with one hand on the job and the other hand holding up on your views. Thank you and good job, again.
@retouchMOJO9 ай бұрын
Other videos have you removing the cam pull, but it's completely unnecessary so thanks you. BUT the best take away from your video is the zip tie trick for putting the belt back on... That was awesome!
@crazysexycool1808 ай бұрын
i hate those type belts
@ImdiekeFamily3 ай бұрын
For your vehicle yes....but kind of unfortunately, they they made a few different styles with the same year. Mine, I have to pull the cam pulley, because it covers the power steering bolt access.
@r.i.a.n.632 жыл бұрын
Excellent video. I was getting so annoyed seeing people pulling the cam pulley to do this job. Props to you for doing most of this one handed too lol. And you gave me a reason to go buy a new tool “see honey, he says I need that spring clamp tool to fix your car”.
@crazysexycool1808 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZbin for more material on a different level.
@anniejo5390 Жыл бұрын
You probably shouldn't watch this if you don't know how to remove a bolt🤣🤣🤣. This was extremely helpful. Full time mom, part time nachanic😁 you saved me alot of money!
@crazysexycool1808 ай бұрын
Thanks for watching , please like, share, and subscribe
@larryaltman18726 ай бұрын
Thanks for the clear explanation and guidance😶
@crazysexycool1806 ай бұрын
My pleasure 😊
@elm41722 жыл бұрын
Good job, man! Very detailed repair job. Thumbs up to you. Keep up the good job. Helping other people should make you proud 👍🏽
@danielhampton90014 жыл бұрын
Thank you for posting this video my water pump just went out I feel so much more confident on having to replace it keep up the good work
@crazysexycool1808 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZbin for more material on a different level.
@juanrodriguez-st2oq2 жыл бұрын
How about the thermostat? Would it not be a good idea to change it when you replace the pump?
@sannybingco22312 жыл бұрын
This is what I need to do now. Thanks for this video bro. It’s really helpful.
@crazysexycool1802 жыл бұрын
No problem 👍
@charless76704 жыл бұрын
Just heading out to do mine. Thanks for your video!
@kellyrogers70662 жыл бұрын
Thank you!!! Does one need to Bleed out the Air of the Coolant System??
@Juggalo559 Жыл бұрын
Can you tell us where the cylinder head temperature sensor is located i have the same engine and cant find a video or picture
@008Sercanu4 жыл бұрын
Hey, thanks for the video. What brand is the hose clamp tool, and where did you get it from ?
@beachbumblog3 жыл бұрын
Thanks for posting this. I'm curious if you happen to remember the mileage you got out of yours? I have one with 110k where it's starting to squeak pretty good, and looks like some movement happening off that cam shaft pulley but was confirming more about it. My belt is super dirty so going to clean it up and check the condition more but probably just time anyways.
@robertohernandez52664 жыл бұрын
Thank you for posting this video.
@hoopzballa3 жыл бұрын
i know this is old, but did you have to drain the coolant from the radiator first? or simply keeping the hose up so the coolant would not flow out.
@jerryrockney902 ай бұрын
replacement of Water Pump went smoothly; but antifreeze empties from system as soon as I start engine up; in frustration, I call a mechanic I know (& use) at that point to see what is happening; he replies that the new pump must be defective; I can't see exactly where the antifreeze is leaking from, but it appears it's coming from directly behind or below the new pump; I noticed that there is a weep hole in pump housing directly above the lower right bolt; he replied that the fluid will escape through this weep hole if the pump is defective; I am taking the pump back to exchange it, but can you explain how the fluid will flow through that weep hole; I am confused on how that happens ( & frustrated that I have to do this replacement again;)
@Nfinitly52 жыл бұрын
I was wondering Can you a 50/50 coolant after draining the coolant?
@jeanettawhite14314 жыл бұрын
He'll what the name of the tool you use for unscrew the screws with? Nice Video
@mechanicandskills72154 жыл бұрын
Excellent thanks bro
@timdoyle99813 жыл бұрын
Just found a 2002 going cheap using water they say possible cracked head. Perhaps its something simple like this but I'm not sure if there's water in the oil it's too far away for a quick check over
@amarilocass76333 жыл бұрын
My belt keeps popping off on the water pump on a 2008 Mercury mariner 3.0 not right away over like a months time this is the fourth belt belt I look like a small only goes by though cam pulley pulley
@juanrodriguez-st2oq2 жыл бұрын
Do you think Because it did not spin it broke the belt?
@robertroland16163 жыл бұрын
What is the size of the bolts your taking out??
@tw61962 жыл бұрын
Is there a weep hole on this pump?
@maxss90054 жыл бұрын
You showed zip tie trick to put the belt back on to the new water pump ,but how to take them off in the beginning. What is the trick on that one.
@mcselasie4 жыл бұрын
Cut it lol. You wont be able to reuse it anyways
@naquangraham4912Ай бұрын
Anyone know what size are the bolts?
@1974geary4 жыл бұрын
Thanks
@frende4812 Жыл бұрын
Doing mines tomorrow
@jerryrockney902 ай бұрын
Can I call someone to ask a question about this?
@bshnabel2 жыл бұрын
Very good, thanks 👍
@crazysexycool1808 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZbin for more material on a different level.
@chuckyray233 жыл бұрын
Whats the torque for the water pump bolts?
@zoneonthetrack44993 жыл бұрын
Same
@sosick20053 жыл бұрын
What were the symptoms of the seized pump?? Over heating, noise etc
@crazysexycool1803 жыл бұрын
yep
@siphilipe4 жыл бұрын
However, the question for me is how to remove the belt? Thanks!
@beachbumblog3 жыл бұрын
Scissors :)
@anthonyharris53064 жыл бұрын
how do you remove the belt though
@davidmcallister4564 Жыл бұрын
Cut it, install new belt with new pump.
@ajamesbertman5 ай бұрын
Anyone find torque specs?
@dorotheataylor7089 Жыл бұрын
My daughter is having this done at Firestone, they say they can't refuse coolant and she needs to also get a system flush as a result of this repair and a oil change....... is this true? PLEASE PLEASE HELP! 🙏
@scout13fox Жыл бұрын
I know this is already a couple of months past, but you absolutely should perform an oil change after completing this repair. This is especially true when you don't know how hot it got or how long the engine was hot. It usually "cooks" some of the oil. Consider it a cheap oil change since it's already in the shop and you won't have to make a separate trip later. The warranty on the water pump "requires" the coolant flush and refill with new. DIY people don't often do it, but should.
@crazysexycool1808 ай бұрын
new coolant yes oil change is not required for this job. Thanks for watching , please like, share, and subscribe
@manuelforero21163 жыл бұрын
Lo
@manuelforero21163 жыл бұрын
Mine goes out at 75000 kms
@juanrodriguez-st2oq2 жыл бұрын
Righty tighty, loosy floossy you forgot to say the size of the boltz.??? Be informative.
@ronaldscott781 Жыл бұрын
11:51 he does here, perhaps a tad out of sequence tho. (8mm).
@crazysexycool1808 ай бұрын
Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZbin for more material on a different level.