How to Replace Front Caliper 2003-2008 Toyota Corolla

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABCR00120
This video shows you how to install a front caliper on your 2003-2008 Toyota Corolla. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Wrench 1aau.to/oR3/1AXAA00010
• 8mm Wrench 1aau.to/og4/1AXAA00011
• 11mm Socket 1aau.to/obiT/1AXAA00015
• 14mm Socket 1aau.to/obiT/1AXAA00015
• 17mm Socket 1aau.to/obiT/1AXAA00015
• 21mm Socket 1aau.to/oaaH/1AXAA00043
• 1/2 Inch Impact Gun 1aau.to/oqt/1AXAA00252
• Torque Wrench 1aau.to/oawS/1AXAA00044
• Brake Grease
• Gloves 1aau.to/oQ3/1AXSS00048
• Safety Glasses 1aau.to/oJn/1AXAA00343
• Drain Pan 1aau.to/ow5/1AXAA00320
• Floor Jack 1aau.to/oXj/1AXAA00068
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@jcrnda]

Thanks for not forgetting to mention the torque settings!

[@jepoydaninja]

Thanks for making these videos TRQ and also buying these parts from 1A auto! Good job and thanks!

[@danyelfenix2750]

Muy buen trabajo

[@handgunner1911]

Thanks for video great view and explanation of how to do it

[@ram4nd]

You spray break cleaner on rubber? Why do you change the calliper not the bushings?

[@Alejandro00729]

Excelente 👌

[@riceburner4747]

Nice job, BUT, no "V" clips on top of PADS?? 🤔👍 PS. clamp the hose. 1st time u broke banjo bilr loose. 😉

[@yeasirarafath32]

I' have complete my automotive leave 1 cors and I need work to do please give me a chance 😢

[@yeasirarafath32]

I want to work with you please give me a chance