How To Replace Power Steering Pump 1999-2003 Toyota Solara

Buy Now!
New Power Steering Pump from 1AAuto.com 1aau.to/ia/1ASPP00026
A failed power steering pump will make lots of noise, and you'll have trouble steering! This video shows you how to install a new power steering pump in your 1999-2003 Toyota Solara.
This process should be similar on the following vehicles:
1999 Toyota Solara
2000 Toyota Solara
2001 Toyota Solara
2002 Toyota Solara
2003 Toyota Solara
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 14mm Wrench 1aau.to/oa/1AXAA00010
• 24mm Wrench
• 12mm Socket 1aau.to/oa/1AXAA00015
• 14mm Socket 1aau.to/oa/1AXAA00015
• 17mm Socket 1aau.to/oa/1AXAA00015
• 24mm Socket
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXAA00044
• Paper Towels 1aau.to/oa/1AXSS00035
• Drain Pan 1aau.to/oa/1AXAA00320
• Floor Jack 1aau.to/oa/1AXAA00068
• Jack Stands 1aau.to/oa/1AXAA00065
Subscribe: / @trq
Check out our playlist:
Toyota Solara 1st Generation 1998-2003: • Toyota Solara 1st Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@teddiazjr.6223]

The pump can be removed with taking out the bracket

[@jackjones9460]

Thank you for the good detailed video. Nothing left out & nothing extra!

[@randallbeavers5284]

Wow! What a fantastic job! Wish all maintenance videos were as polished and fantastically done as yours!!! Keep up the great work!

[@Michelle-SS454]

Got to the part of putting the bolts in and the bottom bolt stalls as we thread it. 2women on a mission

[@mr22guy]

Always use new crush washers! (those aluminum or copper washers that you call gaskets)

[@tipabr]

Great Video! Is there any way to determine that the pump is the problem and not the rack & pinion?

[@johnnygonzalez4209]

Very good video bro thank you so much 🙏

[@joedebosco3047]

OK -- I see you cleaned the mounting parts -- good.

[@thesilentpotter3676]

Great video!! Thanks!

[@SKCCP]

It could have been easier if the nut fastener of the pulley, first.

[@cnsrvtv7666]

Great job! Thnx

[@west_park7993]

i dont like when you use impact wrench to install bolts. if they are not perfectly aligned you will destroy the threads. use grease on the threads.

[@VinodKumar-jt3og]

Nice 👍 good job halpfull video

[@west_park7993]

have you seen leaking hoses? the hoses that connect the overflow reservoir to the pump? the rubber becomes old and starts to oooze liquid tru.

[@malcolmaxolotlhusok8308]

How do you get the pulley off after removing the 17mm nut?

[@greggyfree]

Does anyone know if this is the same as a 2000 Camry V6 xle?

[@west_park7993]

Can you use ATF fluid? I hear they are the same...

[@digdugg4976]

I'm assuming this is the same idea as a camry with the same 3.0 engine? Great vid!

[@jong4203]

I believe it is.

[@gleebob5071]

Ik late, believe the camry and soloras, till the next body style are 3.0l. Newers ones are 3.2l.

[@mariaovando3585]

😱 estes el mejor en you tube pero hablas muy rapido

[@mariaovando3585]

Habla un poquito más despasio para que la traducción en español de tiempo de leerla me gusta tu canal pero hablas muy rápido amigo.

[@west_park7993]

Please!!! DO NOT use impact wrench on 6-mm bolts.

[@TrungNguyen-wv3bd]

Truly TRQ

[@west_park7993]

when you removed the old pump, you could have cleaned the bracket and the tools. this way is easier to work, and if there is new leak, you will see it immediately.

[@TRQ]

+West_Park Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@martinfamilyband]

Seems to be the same as 2000 Camry V6?

[@TRQ]

+carl martin The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ

[@wesraffa]

I shouldn’t have watched this video. Although maybe this is removal sequence for a 3Z it is definitely not for a 1MZ. Just spent an extra hour trying to remove the bracket when it’s two bolts and the bump just drops right out. Not sure what this is