How to replace starter motor on Nissan Sentra 2014, Car dont start, starter motor

Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic
#nissan #nissansentra #nissansentrastartermotor #startermotor #starter #motor #nostart #cardontstart #nostart #sentradontstart #sentrastartermotor #nissnastartermotor

[@Bigum99]

Great job and thanks for the bolt size...easy to understand

[@priscillachava520]

Cool, like this vid and the way you explained it. 👌my next project.

[@RBTheMechanic]

Yup u can do it !!

[@thatsdaniellelol]

Never heard or thought about matching up the teeth…🤦🏾‍♀️🤦🏾‍♀️🤦🏾‍♀️ Thank You!!

[@RBTheMechanic]

Yup Now days part store will sell u anything trust me look check count and observe they look same

[@durial702]

Thank you!! Saved a bunch of money by doing this myself with the help of your video.

[@RBTheMechanic]

Nice job!!! 👍

[@TR-qr9hs]

​@@RBTheMechaniccan u tap it from top or bottom so i can get to my house

[@RBTheMechanic]

@@TR-qr9hs top

[@vincentkosik403]

Jersey, great video and go North Arlington bro

[@RBTheMechanic]

U rite there I come there lot

[@harryschneider1760]

Just had mine done ...was told exust manifold had to come off to do it...told me that's the only way....only paid $280 for complete job....tires plus quoted me $800. Thanks for the video

[@RBTheMechanic]

U welcome!!

[@harryschneider1760]

@RB The Mechanic question. My check engine light keeps coming on for mass air flow sensor...I replaced it twice from Amazon...$25 and $55 for the 2nd. I noticed they were both exactly the part but 2 sellers selling same exact thing....some days check engine light goes off by itself I'm getting 30 to 33 mpg. Should I just leave it alone?I do clear code n last about 300 miles then other times 20 miles...but car runs fine...I just hate having check engine light on....any advice ...TIA

[@RBTheMechanic]

@@harryschneider1760 it might be defective sensor u get lot of these I try to get original

[@blount_man]

This goes for a 2015 Sentra also right?

[@laquandac]

What city is your company located? I like how you explain everything. 👍

[@RBTheMechanic]

I’m on NJ bayonne

[@luisgaribay4783]

I’m fairly new to working on cars and recent broke some corroded bolts to an AC compressor inside the engine and the car spent a week in a shop. 😭 Have you ever found the bolts holding the starter being in a similar condition or is this more of a compressor thing? How would I deal with getting these out safely? Thank you!

[@RBTheMechanic]

No not starter or compressor that’s wierd

[@luisgaribay4783]

@RBTheMechanic Thank you!

[@frankwhite555]

I was shown how to change my power steering fluid on my 2004 Honda Accord lx. I was just wondering do I have to Jack the front of my car up and also when I am turning the steering wheel to get the fluid out do I need to turn the car on and have it running while I'm turning the wheel and pumping the old fluid out and leave it running while I'm putting the new fluid in? Hope that's not confusing haha

[@RBTheMechanic]

No u don’t need to jack up the car but don’t drain it out completly u will damage the pump. I usually suck out the flood from reservo and then put new fluid and keep doing that several time it will clean it self out

[@frankwhite555]

@@RBTheMechanic ok cool thanks again.

[@Yourfavcurlyhead25]

Hey I recently started having problems with my car. It would start in the morning and by the afternoon be dead. I changed my alternator 2 weeks ago. I got a new battery in April. I just changed my starter this morning. Plus I changed out my battery terminals. This has been stressing me out for 2 weeks now. Do you have any idea what else could be the problem. I have a 2019 Nissan Sentra sv

[@RBTheMechanic]

Well can u make a small video when this happens again need to listen to sounds and lighting on dash. Also have sun one help u and when u press brake to start make sure sun 1 is look at brake light if they come on when ur trying to start

[@jbook-fundsfoxbodys9403]

Same for 2018 ?

[@RBTheMechanic]

Yup about same I think so see the set up

[@kingfrostLa]

Hey buddy I did the same thing and 2 light came out in dashboard check engine and another one can u help me plz ?????????

[@RBTheMechanic]

Scan the car maybe u left somthing loose sensor or somthing

[@kingfrostLa]

@@RBTheMechanic p0335

[@AFatherToTheFatherless]

What engine is this for?

[@RBTheMechanic]

2.0

[@AFatherToTheFatherless]

@@RBTheMechanic there's no 2.0 but I see they only use the 1.8 engine. Thanks anyway

[@javmart932]

4Cyl, 1.8

[@antoniocruz973]

Is easier to remove the intake manifold

[@RBTheMechanic]

I doubt it this is simple and safeer

[@justinl9677]

If you remove the intake you'll have to buy a new gasket. Everyone knows that once you remove a plastic intake there's a good chance it will warp even if you remove the bolts in the correct order because of the type of plastic it is made of

[@upsetinstinct718]

@@justinl9677 intake manifold gasket is $15…

[@luiscastellanos1506]

its gonna be a bara bing job! jaja ( laughing face )

[@blount_man]

This goes for a 2015 Sentra too right?

[@RBTheMechanic]

Yuppp

[@blount_man]

@@RBTheMechanic Looks complicated. Might pay somebody to do it 😂

[@blount_man]

@@RBTheMechanic Would it be easier to just work on it from the bottom up?

[@RBTheMechanic]

@@blount_man you can try that

[@Phantom-jce10]

bada bing bada boom

[@RBTheMechanic]

Bang zoom…. Job done…!!!

[@DanielK-tr2ry]

Easier tontake the ten bolt out the intake and move it out the way.

[@RBTheMechanic]

Ok

[@keavisdyer1935]

Wish you recorded from the start to actually show us

[@RBTheMechanic]

Yes but it’s simple I show all steps

[@frankwhite555]

Hey man can you help me with something?

[@RBTheMechanic]

Here’s a video on honda how I did it kzbin.info/www/bejne/lXvdf3aFpcyLnMU

[@frankwhite555]

@@RBTheMechanic appreciate it

[@ClumsyCars]

you can leave everything and take it out the bottom

[@RBTheMechanic]

Ok

[@mannyoge5533]

How much should I charge for this

[@RBTheMechanic]

This is like $250 labor

[@juanrodriguez1114]

How long labor time tho start to finish

[@RBTheMechanic]

I can do this is 45 minutes with tools I have

[@jorgechivalan3215]

I’ll probably take about 4 hours

[@kingfrostLa]

​@@RBTheMechanicneed help

[@RBTheMechanic]

@@kingfrostLa did message u double check all of ur work and scan the car give me the code

[@kingfrostLa]

@@RBTheMechanic ok yes has 2 codes