This video will show you how to replace the EGR Valve on any 2010 Dodge Grand Caravan or Chrysler Town and Country Van. If you have the trouble code P0406 this should solve your problem!
Пікірлер: 65
@frankmarroquin25953 жыл бұрын
I got a check engine light on 2010 Grand Caravan, hooked it up to my scanner. Gave me a PO405 CODE faulty EGR valve. Got a new one from O'Reilly. $109.00 The hardest part was taking out the bottom EGR bolt. No room to maneuver. Must use an angle socket driver. The rest was easy. Thank you very much Happy new Year. May God richly bless you.
@jeffsimpson36404 жыл бұрын
Thank you for this no gimmick or drama. Straight to the point! Very helpful.
@thefixitdad92284 жыл бұрын
You're very welcome. Glad it was helpful
@ani73garcia3 жыл бұрын
I want to thank you for the information you have given us; and I just want to tell everyone to be able to remove the screw it is located on the bottom of her valve, you will need 10 dice, elbow, medium extancion and wrench; push wrench down to loosen the screw and be patience good luck everyone.
@19121chessman3 жыл бұрын
Thank you for showing a logical display of workmanship unlike some of these other JOKERS.
@mongrel17994 жыл бұрын
Just completed over the weekend... 2008 GC, but same motor. I disconnected and removed the battery, after one arc and the determination for more room. I disconnected the spark plug wires as well, for more space. I had to use a 10mm box to get that lower bolt free (almost stripped it... which would've been catastrophic). New EGR had a slightly different orientation for the plug so I had to trim a valve cover bolt/standoff. Otherwise, it was as easy as you depicted. Thanks for sharing!
@thefixitdad92284 жыл бұрын
Thanks for the additional insight. Its always good to know what helps. I always try to make things easy-to-do! I appreciate it.
@victoriaann84953 жыл бұрын
@@thefixitdad9228 , why doesn't the video show how you removed the lower 10mm bolt, can't get a socket on it?
@tomdipasquale96335 ай бұрын
@@victoriaann8495I just changed it for a friend. I used a ratcheting box wrench to get the bolt off. You have to feel for it, can not see it from on top.
@sonofadam4303 жыл бұрын
Well done brother. Very informative and very goof instruction. Thanks a lot. God bless you my brother!
@asdfgh781003 ай бұрын
Good video. Gave us absolutely everything we need to know . . to do the job.
@DaBean4Eva6 ай бұрын
Great video ... also when buying that part it's covered under a limited lifetime warranty at some parts stores
@seistarango3125Ай бұрын
Found great use from this! Thank you 🙏 ✊
@rockym84822 жыл бұрын
Thanks, I'm going to attempt this tomorrow 🤞🏾 you made it look very simple.
@justinjbolyard2 жыл бұрын
PERFECT! Very informative sir thanks for this video!
@slhelper2 жыл бұрын
Thanks for the informative video. Very helpful. Yes, the bottom bolt is very difficult to get to, But I was able to squeeze a regular 10mm socket on a 3/8" socket wrench in there. I also wonder if the electrical connection wasn't at a slightly different angle, as re-attaching the connector took some work. I had to unplug the 3 rear plug wires and the connector to the 'distributor' in order to work that connector into place.
@joelf48924 жыл бұрын
Thank you for taking your time to explain.
@thefixitdad92284 жыл бұрын
You're welcome
@juarezzz3475 Жыл бұрын
Thanks! I just replaced it.
@davestoycave24837 ай бұрын
Awesome!!! Exactly what I needed to see brother.💪A+
@xvassilli28 Жыл бұрын
Excellent video. Perfect explanation.
@esperandieu12 Жыл бұрын
Great job and very useful information.. thank you
@jimbrown35112 жыл бұрын
You just nailed my problem. Good video.
@rackets00110 ай бұрын
Replaced mine, simple enough. Tube is clear and new valve in place. But now it has code P0507 and P0404 and the dash power light come on and it idles like garbage and won't accelerate past about 25 mph! Did I just get a trash new valve from RockAuto or does the computer not recognize the new valve setting?
@RyanVorel Жыл бұрын
How how do u get the last two bolts out the one that under the egr valve and the other one thats on the right side of the pipe cause I'm trying to place mine let me know
@BoxingTECH.canada5 ай бұрын
Thanks, this video is awesome
@user-om2uj9mn7z2 жыл бұрын
Wait how did you get to the bottom, first bolt with the exhaust manifold in the way? Extension? What tool did you use? Thank you
@shawnjackson12233 жыл бұрын
That bottom bolt thats a 10mm how did u get it off. There's no room to get it off. I tried.
@leprechaunfx19472 жыл бұрын
Agree. He skipped the most important part.
@tomdipasquale96335 ай бұрын
I used a ratcheting box wrench to get it off. Just have to feel the bolt because you can’t see it. You might also try a shallow socket using a universal joint socket or adapter with an extension bar.
@jgoyena3 жыл бұрын
how's the EGR valve almost a year now? I have P0405 on my T&C Limited 4.0, not sure if the same part #
@thefixitdad92283 жыл бұрын
Still good with no issues
@jgoyena3 жыл бұрын
@@thefixitdad9228 Thank you I just received my parts today and will install them soon. We haven't driven the van for a couple of months now coz so scary that suddenly it stops whenever it wants.
@jgoyena3 жыл бұрын
I replaced an hours ago. I was so exited to test but still the same, it died after just 10 meters and then 100 meters. I’m thinking if I got a bad part or something else I’m planning to remove and return.
@aaronb67272 жыл бұрын
No gasket between EGR valve and head? Or tube and top of engine?
@GOGSHANK8 ай бұрын
Great informative video
@lecroyantengage8724 Жыл бұрын
HI, WHERE IS IT LOCATED IN THE 2013 DODGE GRAND CARAVAN?
@briansell9772 жыл бұрын
Thank you that was very helpful
@cachoscorner5488 Жыл бұрын
Thanks for video.. My 2014 town n country reads a misfire cylinder 2.. Started of with spark plugs..will move to EGR..since its really Misfiring..
@danjohnson53556 ай бұрын
Check the coil first.
@benitaeason11064 жыл бұрын
Great job 👌
@thefixitdad92284 жыл бұрын
Thank you
@CHEAPROLLIN Жыл бұрын
Did it fix it
@TimothyTrisnadhama3 жыл бұрын
Hi, do you have the link to the part you ordered? I googled dorman and the review was pretty bad on amazon... Which one did you get?
@leonardoromero63112 жыл бұрын
Great vid!
@mattgetsey18043 жыл бұрын
Super helpful, thank you!
@davestoycave24839 ай бұрын
Can this keep the van from starting?thanks!
@nielminor75293 ай бұрын
So I've been having intermittent start issues for years. Have always been able to get it started, but can take 2,3,4 times to do so. I only had 1 key fob, got a new one and went a year without issues. Happened again and found out i had major oil leak and radiator had hole in it. Replaced, went months no issues and again started having start issues. This time i got a check engine light. Mines po401 but still the EGR valve. I was told that this can cause starting issues.
@armandosmendez99002 жыл бұрын
Thank you for this video
@TheGeno2001h3 жыл бұрын
How to test fuel pump on 2010 Chrysler town and country (without adapter) at the end of the video see how I replace the EGR
@devildog61793 жыл бұрын
Should add the link for the one you ordered in the description
@SparkyFireDog20004 жыл бұрын
I cant get the red clip off
@thefixitdad92284 жыл бұрын
They can be tricky and stubborn sometimes.. If you can get a small flathead in there that may work to help release it.
@fastgoturbo3 жыл бұрын
Got right to the point perfect
@olderolderman46033 жыл бұрын
Thank to the 👦 that has little Marco Rubio ✋ ✋
@sabian27724 жыл бұрын
Ty sir!!!!
@thefixitdad92284 жыл бұрын
You're welcome. Gald to help
@AlfonsoHernandez-bz3fq4 жыл бұрын
Thank you....
@thefixitdad92284 жыл бұрын
You're very welcome
@leprechaunfx19472 жыл бұрын
Too bad you skipped showing how you actually get the bolts off the bottom. Thumbs down for that reason.
@davidmdonaldson Жыл бұрын
Thumbs down for your shitty comment.
@Wykednick10 ай бұрын
Common sense man, you just take it to a mechanic shop