How to Replace the Fuel Pump on a Nissan Xterra/Frontier

This video demonstrates the proper method for replacing the fuel sending unit assembly (fuel pump) on a 2005 Nissan Xterra. This video should work for all second generation Xterras 2005-2015 and second generation frontiers.
Here is the link where I bought the pump: amzn.to/2i4HZju
Check out the Official RTCG website! rtcg.tv
Support the channel and get a cool t-shirt: represent.com/...
***As an Amazon Associate I earn from qualifying purchases by use of affiliate links.
#howto #diy #auto

[@JesseTobler]

My dude. Can not tell you how valuable your XTerra videos have been for me. Thanks for the great info.

[@marcusmarron6113]

No bells and whistles, no unnecessary editing, no acting, wow , no sponsors! All thoroughness and great detail! The level of SAFETY taken.. it’s a freaking gas tank after all.. keep the good work up, stay true to your roots.. yes I’m 5 years late.. this is EXCELLENT.

[@Rythecarguy]

Wow, thanks Marcus. I appreciate it. 💪🏻

[@Sean-ii6sz]

Great video, you will need to buy the Dorman 800-041 5/8in Fuel Line clips. They are designed to be a one time use part, they are on Amazon for less than $10. I saved $700 by doing it myself. Total time 3hrs start to finish, fuel pump $130, fuel clips $10, satisfaction not giving the dealership my money, priceless.

[@Rythecarguy]

+Sean Creamer awesome! Isn't it a great feeling to knock out jobs on your own car?!

[@jonclarkson5911]

700 dollars?? Impossible. My mech wanted 400 bucks. Did it myself. Everything was right there. Banged it out in 2 hours with beer breaks. Just needed to replace that round o-ring washer.

[@P50MG]

Just replaced Fuel Pump and sending unit in my daughter's 2007 Xterra. This is the best video on YT to help you though the job ! Using Amazon, I chose to by the Bosch unit for about $180 and added the Dorman plastic clips to my order. Glad I got the Dorman clips because the original ones broke. I would just get new ones and not waste time trying not to break the brittle originals. Also, I took an extra hour or so to pump out the 7 gallons of gas with a small hand pump, had to access the gas via the tank opening after disconnecting the filler tube. Couldn't fit floor jack under tank, and with it empty, you don't really need a jack anyway. Glad I had the impact wrench to loosen the tank strap bolts! Was tough to get the electrical connector on the new pump, very snug fit, Thought I was done but had a gas leak due to pressure hose not being fastened securely on the new pump, luckily there was no other issue. If I can do this, you can do it too! Thanks to Ry for the excellent video, I saved about $800 and spent 5 hours with my mistakes and stretch/water breaks. Now that I did it once, I could do it again in about 3 hrs. if tank is empty to start and I didn't waste time trying to save the original Dorman clips.

[@joebarraza3896]

Loved the video. I went the easy route and cut a hole in the back seat. It was simple with the right tools.

[@jonclarkson5911]

Seats in an xterra pop right off.

[@sephiros9883]

Your videos are so underrated, it should have tons more views and subscribers! Thank you!

[@Rythecarguy]

Wow thank you. Thats a very nice thing to say.

[@mjschuetz]

Just finished on my 2007 Xterra. This video was a lifesaver! Also saved ~$500 by doing it myself. Many many thanks!!

[@stephenheymann323]

Just finished this with my 2005 Xterra. Thanks Ry, I've used 5 or 6 of your videos now for major maintenance and all projects have been successful. I'm blacking out my X soon with your trim paint video. Keep em coming.

[@waldenhatton7313]

How long does the job take?

[@Islandlyph]

You change so much things on that Xterra, by the time you’re done with it it’ll be like a brand new car!

[@Rythecarguy]

Haha just about!

[@ksaint3244]

97 pathfinder R50 after dealing with p0505 and ecu replacement and tps now I have a MAF p0100 checked open wire no big deal. Attempt to do idle fuel mixture procedure stalls out no codes check pressure no adequate pressure well looks like I gotta do a pump now

[@eliassisneros5390]

best how to video i have seen for nissan

[@TheRealBobHickman]

Just replaced my sender/sensor rather than the whole unit. Wanted to say many thanks for detailing the whole procedure. It really helped. I had one mishap where the fuel line wasn't fully clipped in (and spewed gas everywhere) so I had to drop the tank a second time, but I finally got it. Thanks a bunch man, and keep up with the videos, your content is awesome!

[@sethdover4999]

For those of you with the Gen 2 Frontiers that have had the fuel pump fail...did you have a period of time (before it failed for good) that your truck would randomly go dead while going down the road, but you could crank it right back up? My 2006 4.0 did this for at least 2 years before the fuel pump finally went out. It wasn't often, but about one a week it would randomly just die sitting at a stop light or even going down the road, and I'd just pop it in neutral and crank it right back up. In hindsight, I'm pretty sure now that was the early stages of the fuel pump failing.

[@Lexy1596]

You're so awesome! I love watching your videos. I've installed my own hitch, changed out my radio, conditioned the plastic trim and installed my own spark plugs thanks to your videos :D Changing the crankshaft position sensor next, thinking the fuel pump is gunna pop up here pretty soon too lol. Keep up the good work!

[@Rythecarguy]

Thank you, YOURE awesome for watching my channel.

[@tejano2828]

you did the spark plugs? they are a pain I did mine also.

[@mlg0303]

This video was spot on for my 2006 Frontier. Had trouble getting the fuel line clip removed from the old pump, but everything else went really smoothly. Thanks so much for your time and effort in making this and all your videos!!!!

[@Rythecarguy]

Glad it helped

[@jodysanders1111]

Very thorough. This means the world to someone who hasn't tackled a job like this. Thank you.

[@Rythecarguy]

My pleasure! Thank you for watching.

[@jimlimon2986]

Watched your video and got on it and finished in 45 minutes. Dropped the tank cleaned out tank installed new pump and done. Thanks for video

[@Rythecarguy]

Good work man. Glad you got it knocked out.

[@ericklamotte617]

You are really good at explaining the process of all work done on the Xterra, all your videos are excellent, thanks.

[@Rythecarguy]

You’re welcome Erick, thanks so much for watching.

[@papertrail44]

Great video. Finished my job exactly same amount of time as you said. Wouldn't have been that way without your tips and pointers.

[@Rythecarguy]

So glad to help!

[@frankwebb9167]

This video is outstanding. Had to replace the fuel sending unit on my 2006 Xterra last weekend and followed this step by step. About 3 hours (and a couple of bloody knuckles) and passed inspection with flying colors after the codes reset. Thanks for the great details!

[@Rythecarguy]

My pleasure! Thank you for the kind words.

[@sethdover4999]

Frank, why not replace the whole assembly while you have it all out?

[@dorit7402]

Thank you so much! Awesome instructions! Your video enabled me, a complete newbie to car mechanics to exchange the fuel pump with a little help by my injured hubby. Probably not what you put it up for, but honestly very empowering for me to see I can get something like this done! Thanks again!

[@Rythecarguy]

It's exactly why I upload these! I actually catch flack from more experienced people because they think I over explain. But TFB, I would rather help people like you. I love hearing stories like this and I appreciate you sharing it with me. Hope your hubby gets well soon. Congrats on crushing the job. 💪🏻💪🏻

[@zerogravityindicator]

thank you for your video. DIY guy here helping a neighbor. your tips helped. also ordered the dorman 800-041 clips as replacements since they were brittle.

[@Rythecarguy]

Good call!

[@donolson874]

Thanks for posting this very helpful video. I have a couple of suggestions, first never take chances with fuel connectors. Replace any connectors or hoses that break while disassembling. Second, as others have mentioned clean the tank thoroughly before removing the fuel pump/sending unit. Thirdly, carefully inspect the electrical connector that plugs into the fuel pump for signs of overheating or corrossion as this can cause fuel pump problems even if the pump itself is good.

[@Rythecarguy]

👍🏻👍🏻

[@CorbanLundborg]

Thanks Ry The Car Guy. I watched the video and figured it out, saved me $500. I also bought the Dorman 800-041 5/8in Fuel Line clips after reading the comments, mine broke as well.

[@Rythecarguy]

That's awesome Corbin. Glad you got it worked out.

[@CliveBarnettrecluse]

Appreciated especially, the advice at the end with regards to allowing the system to pressurize by turning ignition on and off before actually cranking.

[@Rythecarguy]

👍🏻💪🏻

[@1smoothlander538]

Nice job. My dealer wanted 1200 for that job. Found a quality part on RA for about 180. Looking forward to knocking it out.

[@revolutionaudio1599]

What brand did you end up buying on Rock Auto? I'm in the process of comparing the different models and am thinking about buying the Bosch part.

[@mikeobrien5867]

Thanks for the video! I'll be tackling this job tonight.

[@Rythecarguy]

Of course! Hope it goes well!

[@Rick99gsx]

Thank you so much for this video. It helped a lot with the fuel pump replacement on my '06 Pathfinder. Those little plastic clips broke on mine as well, maybe you can update the description with the replacement part number so people can have them readily available. Our local parts store had them in stock, the ones I purchased where the Dorman 800‑041. Again thanks for making these videos!

[@mikebannis]

Thank you Ricardo. It's so much easier to just break that silly little clip and replace it than try to remove it.

[@robertoternate5195]

Roberto Ternate 1 hour ago The video gives me the confidence to replace the fuel pump on my car. Excellent!!

[@Rythecarguy]

Glad it helps!! 👍🏻

[@mogwyrependelhurst1947]

Got the P0463 code 1 week after buying my 2005 X at a used dealership :\, bought the assembly that you listed (hope that helps support the channel) and the light turned off before I could get around to dropping the tank! It keeps turning on and off, typically after I fill the tank up. I might just wait until the code stays put before doing this fix, and glad I have this vid for reference.

[@samstevenson7723]

Good video. My son and I just replaced the fuel pump assembly on my daughters Xterra. Get the Dorman fuel line retainers part number 800-041(two clips per package) for the fuel evap hose. These clips are a one time use item, just pop the old ones out with a pocket screwdriver.

[@nowukno9]

Compared to the Timing Chain job this was soooo much easier on my 05 Pathfinder. Hardest part was trying to figure out a lift to lower/raise the tank while keeping balance. I didn't feel comfortable with my floor jack and ratchet straps so i used my ATV lift and it wasn't perfect but it did work. Other than that it went pretty smoothly. I did break both clips but i prepared and already had a new pair that i bought with the new fuel pump...once done the truck fired right up and check engine light gone. And best of all i now know how much gas is in the tank lol.. Thanks again Ry your videos are the best very detailed and accurate. Keep doing what you do.

[@Rythecarguy]

I agree, since this video I have started using a transmission jack and that has been working wonders.

[@starguard4122]

Thank you for taking the time to make this video. It was very useful and informative!

[@HowardPaulblasingame]

Thanks for posting. I will be changing my pump next week

[@Tecnolock]

Another fantastic video. I broke a C clip like you did on an old Ford Exploder and the local Napa sold them in a four pack.

[@johnnylorona3361]

How much for the clips

[@Tecnolock]

Johnny Lorona, they were like $2.50 when I got there.

[@johnnylorona3361]

Thank you I appreciate that

[@pfam12134]

Thank you Ry for the video, it was tough but I got it done.

[@Rythecarguy]

Glad you got it taken care of! Thanks for watching

[@brady4475]

Thanks my new friend. Great video, you made the job so much easier with all the fine points. Hard to find someone like you. Watched many videos yours is by far the best. Thanks again!!

[@dereksmith4178]

really one of best how to videos I've ever watched, thanks for your time you put into this.

[@Rythecarguy]

Wow that means a lot for you to say that. Thank you. They are a ton of work but I am happy to do it if I know they help people.

[@Afig24]

Well I have been putting it off but finally completely replaced my fuel pump and fuel tank on my 05 Frontier. The tank was leaking gas and every sealant I tried would not work for much more than a few months. The pump was still working but I figured I should replace it since I was in there and because it was over 10 years old. You're video helped a ton! Literally same exact process from what I could tell. Hardest part were those damn plastic electrical connections. I was able to get them all off without braking anything but it took forever. Anyways, thanks again for the great vid!

[@Rythecarguy]

That's great! doesn't it feel good to get it done? I love getting things working again.

[@charliejohnson5375]

Nice video. Lots of good info. I would suggest that after the tank is out, you scrub it clean BEFORE you pop the pump. ALSO use a brass drift instead of a screwdriver.(No Sparks). You should also clean the inside of the tank. Good job. Always be safe.

[@gettammyc]

Thanks you so much for this video. Thanks to you, we successfully changed our fuel pump on our 2008 Nissan Xterra. There was a lot of cussing involved, but we did it! You're awesome! Thank you!

[@Rythecarguy]

+Tammy Carmical thanks! I'm glad it helped!

[@Gaspumperman]

Thanks for the video. I look forward to knocking this out quick. I did the pump on my 07 Saturn Aura with somewhat short jack stands in about 2 hours....this looks a lot easier.

[@percivalL8685]

You sir are a life saver!

[@danielvitale6852]

Ry, thanks so much for this video, as others, I was able to get this done and save at least 600 bucks. I did get the clips which I definitely recommend as I broke both, and by far the biggest challenge for me was getting the electrical plug disconnected. I had to press on the clip with pliers to get it out, but other than that it was pretty straightforward. Again, Thanks!!!

[@alexlunham61]

What a great help this was. I have been waiting years to do mine and i have watched your videos over the years leading up to me doing it today. Thanks for the video dude!

[@Rythecarguy]

My pleasure, glad to help.

[@klrmoto]

Thanks for creating your video!! The video provides so much information for advance planning purposes etc...

[@mountainbiker44]

You’re vídeos are the best. Thank you

[@Rythecarguy]

Thanks man! 👍🏻🤘🏻

[@phonkyfeel1]

In case anyone hasn't added this comment... That c-clip will come out if you very carefully bang out the rocks that are kind of caught up inside that clip area hit it with a screwdriver handle very carefully...... and definitely props on the video extremely good video

[@Rythecarguy]

+Joey Scagnoli thanks man!

[@belbusrodman576]

really good video. Despite your warning, I also broke the same clip. I just replaced the fuel sending 'brush' 30$USD part on the fuel pump to fix the fuel gauge/whole repair should be warranty recall in Canada but is only so in the USA. Still had to do everything you showed. Thanks. Good work!

[@bikerworld2471]

I loved the video. Very few good ones for us Xterra owners.

[@Rythecarguy]

Thanks man! I have like 100 more of you need anything for your X

[@mariansirbu867]

I like so much your explanations, you are real professional mechanic and you know to explain without doing "circus" show , as they are doing other guys , here on you tube, where under the reason that they explain something they are doing really unpleasant "circus" show. Congratulations sir ! My full respect and considerations. Definitely I'll subscribe to your channel .

[@carltongossett2282]

Thanks Ray will do

[@Rythecarguy]

👍🏻

[@thomasghernandezrivera8806]

Thank you so much for this video. It helped me a lot to install the Fuel level gauge on my Frontier and Pathfinder. Nice Video!

[@Rythecarguy]

+Thomas G Hernandez Rivera thanks!

[@stephenyackel7720]

I just wanted to say thanks this video truly helped me out. And great job on videos they have answered all my questions and the video quality was perfect

[@Rythecarguy]

You’re welcome. Thank you for watching!

[@joshdecamp6958]

Very good. It's a great video for the less experienced. You were slow and informational which is great compared to other guys I watch and don't explain things worth a damn. And there too fast as well. Anyways I'll keep watching your videos if you keep posting them for sure!

[@Rythecarguy]

Thanks man! Thats the plan!

[@dukeritchie]

Super helpful Ry, thanks a ton.

[@kevinshea5819]

1:08 removing the gas cap .."I assure you that is the easiest step." LMFAO

[@Rythecarguy]

😂

[@renedelafuente123]

Thanks for your reply, but I didn't have time to reset the engine light, so I ran the frontier with engine light on, and wallha, light went off by itself. And that was sure the problem, defective sending unit in fuel pump, the other defect the frontier had was radiator which I already changed out, and the other defect on this stupid truck is power distribution module, but have not noticed any bad symptoms on this thing. Called the dealership if any of these defects could be changed for free, but you already know it wouldn't be free. Don't buy the Nissan Frontier, nothing but problems, and it barely has 96,450 miles on it. Again thanks for the video, it sure helped us out a lot. Keep'm coming.

[@lukejensen2661]

Thanks for doing this! Just finished mine up and this video made it easy.

[@Rythecarguy]

Glad it helped!

[@FIF0101578]

Great video like always. You always take the time explaining everything carefully for our benefit. In the future though. If you are worried about sparks from hammering try a brass punch.

[@Rythecarguy]

💪🏻

[@hemi1500srt]

ive been watching your xterra videos and they been helpfull thanks man keep up the good job

[@Rythecarguy]

Thanks man!

[@dogger99]

thanks for posting great video, is there a drain plug in the bottom of the tank to empty the tank first?

[@jayline8250]

I just took out back seat then cut hole in floor behind seat exposing fuel pump, changed pump, used sheetmetal and rubber gasket to seal hole, no fumes or water can or has got in, lot quicker and lot easier

[@johnjpa808]

Good video bro. Savings this when I need to do mine. I have to do my engine mounts when they come in on my Xterra

[@Rythecarguy]

Sweet man, let me know how it goes.

[@sloppyjoez]

Thanks again for posting this, was looking to tackle it in the coming weeks but hit another road block. Rats have made a colony inside my engine and ate every wire imaginable. Looking to claim on comprehensive insurance to avoid the monotonous shirk wrapping and soldering of new wires. Cheers!

[@Rythecarguy]

+Josh Hahn Damn! sorry to hear that. I hope they help you out.

[@tomlee6263]

To the sky and beyond! Thanks!

[@sadramirez]

He is so cute and helpful!

[@Rythecarguy]

Why thank you! :)

[@leapnlarry]

awesome video, i have the exact same problem with my xterra, it is going to be a good sized job, now i know what i have to do to get ready. I have made some videos on my xterra, so i know how much work it is putting together doing one of these videos, while also figuring out how to do it. thanks again!!

[@Rythecarguy]

My pleasure. Thanks for watching

[@tejano2828]

Took apart my back seat i am not willing to destroy my carpet it looks brandnew just to cut out a piece of metal to get into the tank, looks like I'm either going to pay for it or I'm going to drop it so checking out your video thanks.

[@mannygomez3879]

Brother, i have a problem with my xterra. I have good Rams but it doesn’t accelerate at all. Got my transmission check and they it’s good. The throttlebody is new also. I removed both catalytic converters and still having the same problem. Do you think is the fuel pump that is not throwing sufficient gasoline? I really don’t know what else to check. I been a subscriber since long time and every time i have a problem with my xterra i watch your videos! Thank you so much for helping us a lot !

[@TheSkoto1]

I know this is old but there is an access panel under the back seat so you don't have to pull the tank? On some of them. If not cut one.

[@Rythecarguy]

That's true for some models. Not mine.

[@TheSkoto1]

@@Rythecarguy I cut a hole in mine took me about an hr in total and then cut a piece of sheet metal, sealed it screwed it down in place covered it up with the carpet just in case I'd have to do it again. so much easier and quicker. Didn't have to drain gas jack the car up take a tire off. Just like the factory did and should have kept doing. Saved them money cost us more.

[@rizz917]

Another great video, Ryan. Thanks a bunch!

[@Rythecarguy]

You're welcome, thanks for watching!

[@smokegonzales2605]

How do you do a fuel pressure test ?

[@maricagayjotomen]

mire un video antertior el cual facilito el remplazo de bomba de agua de xterra 05 igual que esa , ahora por casulidad a la misma camioneta le cambio la bomba de gasolina y miro de nuevo un video tuyo , me sirvio y mas facil al hacerlo, gracias ry. :)

[@carltongossett2282]

Ray I need to change my fuel strips for they are bad rusted the truck came out of Chicago Illinois but bots are so rusted I rounded one bote head off . Can you help me with this ??

[@carltongossett2282]

Ray how often should I charge my fuel pump it's been working fine but has 246 thousand miles on it ?? Thanks Carl .

[@Rythecarguy]

They are technically not maintenance items and they usually show symptoms before failure. TBTH I would wait until you see issues before taking action.

[@Islandlyph]

Maybe you’ll know the answer cause everyone else can’t figure it out. I have a 2005 Xterra, it has hard time starting when hot, it’ll start every time when cold, but after turning it off it won’t start until I wait 10-15 min then it’ll start. I changed the fuel pump, relay, spark plugs and coil packs, cam shaft sensors and it still has the problem. Once started it runs great. Any advice will be appreciated.

[@glock316]

Ever figure this out?

[@totally_not_joe_mtb7998]

Same exact problem here. No one can figure it out. Replaced everything and still won't start after it's hot. Anyone figure it out?

[@StevenChisham]

Is there just a fuel filter in the sending unit or is there a second one somewhere?

[@dorse72]

I cant get my daughters Xterra to start at all, just replaced battery, turns over just like this one. 125k miles, 2012, I really think its the fuel pump but REALLY dont want to tackle that job. checked fuse, it looks good, cant find relay. What about plugs and wires?? throttle body test Angel Fix did?

[@benito26py]

Thanks for the vid. I just replaced the unit in my 2006 Frontier and this was extremely helpful!

[@Rythecarguy]

awesome! was it the exact same process?

[@benito26py]

Yep, exactly.

[@Rythecarguy]

+W Bennington Nice, I should put that in the description. thank you!

[@AbelJauregui-y1s]

Thank you for your help.

[@Rythecarguy]

👍🏻

[@DonRomandel20]

Awesome video I just finished changing the fuel pump on my 07 Xterra and everything went smooth thanks to you, question does my 07 xterra have a fuel filter as well?

[@anibarlainez60]

Very detailed video, I have an 08 Frontier and when I try to accelerate it doesn’t respond right away, it jerks a little, it does this every once in a while, any idea what could be, thanks

[@jasinwest9511]

This was a awesome video it helped me out a lot and showed me how it was supposed to be done correctly

[@Rythecarguy]

+Jasin West thanks! I'm glad ot helped. More coming soon!

[@jvazquez7160]

After I replace the sensor level I get a code of evaporation leak I've been told is cuz didn't replaced the O ring seal with a new one

[@brendacatron3703]

Please tell me how I can retrieve a simple fuel sample to verify there is water in my tank 06 Xterra 4.0. THANK YOU!! I bought gas at a service station in a few miles down the road everything went to heck. :-(

[@keithtx8983]

Great video, thanks. Question: the strap with the "T" at the end, that hangs from a cross member, when I dropped the tank it wouldn't come out. Fell out on it's own while I had the tank out, and now I can't seem to find the magic touch to hang it up again. Would appreciate any suggestion here. Thanks!

[@PrettyRayNola]

Hey I have questions I just change my fuel pump and now When I put gas in the gas come out a lil it want me fill it up. What can I do to fix it?

[@markdoucette3096]

Question. Throwing code P2A00 and P0180. Fuel pump works and is maybe 2 years old. Could they be connected? Should I replace with higher quality pump?

[@lorettacaputo6997]

I understand that the gas line filter is in this tank. Is it a part of the entire fuel pump system and if so, where is it? I understand that changing the filter is a scheduled maintenance item that I am dreading if it is infact a part of the fuel pump system.

[@sapphirejan2040]

Very nice, thorough video thanks. I came here to try to get an understanding. How do I know if I need a fuel pump or just a fuel level sensor? 2007 Xterra same code P0463. Only symptom is the gas hand situation that you describe.

[@Sroor2023]

Want to ask you that seal wich match the wiper washer fill up with washer tank there is a seal is it available in nissan cause mine went bad and was thinking its the tank, ive dissasembled the tank but no problem 😄 so that seal only do you have any idea its matching fill up piece from engine bay to the tank which is in the inner fender,.

[@dantemolonlabe1090]

Thanks for another great video. On start up I noticed your vehicle had high revs why is this and where is the fuel filter situated? My Navara although it always starts you have to crank for a short while then it revs high when it starts could you offer any advice as to why this would be? I thought maybe a blocked fuel filter or faulty pump? Many Thanks.

[@ahtoh1]

I have P1446 code. 2005 Xterra (auto). Do you have material explaining on what to do? Seems like a bunch of things that needs checking to resolve this issue. A video would be lovely.

[@joeperea3979]

hi do you know where the fuel pressure sensor is located ?

[@renedelafuente123]

A friend of mine helped me change out the fuel pump on a 06 nissan frontier b/c experiencing same problem as you, problem with gas guage. We took out the fuse and did what you did, but forgot to disconnect battery cable. Everything went smoothly, truck is running with no problems, no leaks, etc. Only thing is engine light is still on. Do we need to disconnect battery for it to reset? Would hate to do that b/c trip odometer reminds me when to change oil. Thanks for video, any feedback appreciated.

[@Rythecarguy]

I have an OBDII reader that I use to clear my codes at home. I made a video on the one I use if you want to take a look: kzbin.info/www/bejne/anilmqqrndyIZ7s

[@carltongossett2282]

Thanks for this video it helps me out because l Haft to change my fuel pump on my nessan extra

[@Rythecarguy]

You're welcome

[@ahmadghosheh3104]

I am thinking about just cutting a hole under the back seat after dropping the tank for future access. My Camry has access port from the factory and I don't see why not have that here.

[@submerj]

Great video. I was under the impression that the error code indicated a faulty fuel sending unit. I have this issue that the gauge reads correctly until about half full then drops to empty, The check engine light is also on. I need to fix my 05 Xterra and wondered if just replacing the fuel sending unit is enough or is it wise to go ahead and replace the entire fuel pump module just in case it is near failing? What do you think?

[@OscarMejia-nm9lv]

Hi Ray I do have a Nissan Pathfinder 2005 my fuel Level gauge don’t ready accurate with the digital deader. Sometimes the digital read empty but the level gauge read half tank Any idea about this ?

[@Rythecarguy]

It’s likely that you’re level indicator in you fuel tank is getting stuck due to corrosion.

[@OscarMejia-nm9lv]

@@Rythecarguy thank so much for answering. The pump is only one year old

[@kikoy1061]

I follow your video to fix P0463 and the issue was resolved , but when i erased the code ...P0181 and P0182 pop out ?...im looking for a video with these type of code and nothing...hoping u can help...thank you again Louie