How to Replace Timing Chain Set 02-05 Mercury Mountaineer - Part 2

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@AntoineFinch]

FIXED MY 01 FORD EXPEDITION USING THIS VIDEO GUIDE! Everyone told me a 4.6l was a throw away engine but after replacing the timing chain and tensioner/guides it runs better than new you can't even hear her running THANKS

[@1AAuto]

+Antoine Finch Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/timing-chain-set/i/1atbk00100?KZbin&CTA+Comment&TCMvN20

[@determineddad7935]

Antoine Finch Awesome. All my friends say it's not worth it. Gonna try this soon. Any advice?

[@R3llim87]

Have a good set of tools. Takes a day for a first timer. Cleaner, rags, an impact or an electric 3/8 ratchet will speed things up a lot. The fan is perhaps the most difficult. I prefer the trick using a strap wrench and a 18" crescent.

[@PonFORDS]

Antoine Finch WoooooT!!!! Congrats!!! I like it when people take control an do things themselves. You not only saved yourself some coin but now you got the pride of saying you did it YOURSELF!! Again congrats Bubba!!

[@sparklesherelle6702]

Can you come fix mine, I have a 02 ford expedition

[@kmoss9521]

I was having a hell of a time getting my chain on until i saw you do it. Thank you so much

[@lyubomirnoev1164]

Great job , man ! Maybe take off front grill and radiator for easy job?

[@08_crown_vic]

Is it possible to put back the timing civer without removing the valve covers?

[@arthuresclamada1805]

was wondering why you need to remove the sprockets when taking the chains out? can the chain be replaced without taking the sprockets out? thanks..

[@josezarate2761]

Very good video guys I wondering how much would this job will cost?

[@Silent_Shadow]

Is the timing kit different between the 4.6 and 5.4 2v? Because finding the kit is difficult. Please help.

[@dudleyrue6859]

I am sure you have the guides crossed up. The shallow one goes to the left.

[@DaddyJuanCGonzalez]

Are the camshaft pulley screws reusable for this 4.6 engine or do they have to be replaced when changing the pulley?

[@commanderstud2417]

Is the cam holding tool only used for holding the cams solid in place when removing the sprockets??

[@Joanmclane6697]

I have a 4.6l v8 2v and im installing the timing guides and chains after everything was set to top dead center and i wanted to double check the rotation and I noticed that the chains go from loose to tight during hand rotation. Is this normal or did I do something incorrect?

[@prosserdaqwerty]

Just so I'm clear, the crank timing mark must be at 11 o'clock AND the cam sprockets both at matching positions? Or do we start with the crank at 11 o'clock, move the cams to matching positions and wherever the crank mark winds up is where it should be?

[@josephsmith2599]

If it has jumped time how do you make sure that everything both the cams and the crank are in time before you put the chains on without screwing up the valves or the Pistons?

[@dxta7360]

Depends on how many teeth has jumped.

[@geofferymaxmax]

I know the outside of this engine look dirty but the inside of it is super clean.

[@davidhoulden5791]

Can you give me a link to the camshaft holding tool.

[@smileythegee6950]

that 2x4 method for the harmonic balancer is genius

[@smileythegee6950]

+1A Auto Parts It worked like a charm for me! Great video i thought the whole timing chain replacement procedure was harder, but your video made it very easy well everything except that power steering pump bolt hahaha

[@Pneumamechanical]

good video, thanks, I just did this job on a 4.6 2V in an '05 F150. broken guide on the drivers side. Put it back together and it still makes noise, now what? I heard an oil passage might be clogged? Maybe followers

[@1AAuto]

+Terry Filkins We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Pneumamechanical]

@@1AAuto lol, I am a mechanic, I use the forums and youtube a lot. I haven't ran into this before Just looking for some idea'

[@richardtrowell8812]

@@Pneumamechanical Any luck resolving your 4.6 problem. I got a used car with same motor same issue. Lost all oil pressure. Started with cold start noise. Previous owner didn't change oil all clogged up. Two mechanics were no help. Pulled plugs, coils and valve covers to find out. Have either valve seals leaking on left cylinder head or left cylinder head gasket bad. No engine codes just low oil pressure light. Go figure.

[@harrington6225]

at 1:57 until 2:15 what was that tool number?And did you have to removing any of the components on drive train.my plans are to replace timing guides,tensioners,and oil pump on 2001 Ford excursion 5.4l gas,w/324k/no compression problems. just would like to expand the life of engine.I've take great care of engine

[@1AAuto]

+Nalt Harrington So, the tool shown in the video is a generic camshaft holding tool for a Ford. It's not something we offer, but maybe you could pick one up at your local tool vendor? Otherwise, your plans sound good for replacing those parts. We'd recommend you do the water pump while you're in there. I'll post a couple of links for the parts you listed. WATER PUMP: www.1aauto.com/engine-water-pump/i/1aewp00180?f=900792&y=2003&KZbin&CTA%20Comment&ATony TIMING KIT:www.1aauto.com/timing-chain-set/i/1atbk00100?KZbin&CTA%20Comment&ATony OIL PUMP: Unfortunately we don't offer this part right now. Sorry about that! Hope this helps!

[@mrobles661]

Good idea to spin the motor with a ratchet before you put the timing cover on. Just in case you missed something on the timing. Cheap insurance.

[@determineddad7935]

z4pp 2 rotations right?

[@midnightrun7]

Great video, What kind of cam holding tool did you use. I have not seem them around. Peace!

[@1AAuto]

Thank you for watching. It is a general Cam holding tool, you should be able to purchase it from most tool vendors like Snap-On, Matco, Craftsman may have one as well. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@RNTV15]

Thank you for posting this

[@1AAuto]

+Redneck Tv Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/timing-chain-set/i/1atbk00100?KZbin&CTA+Comment&TCMvN20

[@joshferrell2777]

Im still looking for a cam holding tool also

[@AntoineFinch]

what about 01 expedition eddie bauer 4.6 L 2V ? is it the same

[@colesmith2447]

How did you re-compress the tensioner after taking it out?

[@determineddad7935]

Cole Smith your kit should have clip to hold it

[@lilkiller20]

will this work for 2005 Mustang GT 4.6l 3v?

[@America_Countryhumans1]

Hey can you tell me how much that kit runs i have an 02 explorer and the left side tensioner is making a horrocious noise

[@1AAuto]

+josh dylan Sure here's a link to the kit shown in this video with current pricing www.1aauto.com/timing-chain-set/i/1atbk00100?KZbin&CTA%20Comment&ATony

[@wise3489]

will this be basically the same for a 2002 f150 5.4?

[@1AAuto]

Since they're different engines, they probably won't be the same procedure. Buy your auto parts from 1AAuto.com?KZbin&CTA%20Comment&ATony

[@southpaw8040]

if youre only replacing the tensioner and guides, is the cam tool necessary?

[@josuevasquez578]

Do you have a video on a 4.6 4v?

[@1AAuto]

+josue vasquez It may be a different procedure on your application. We currently do not have an auto repair video for this particular engine set up. Thank you for asking. 1aauto.com

[@alexvelez2141]

Cam shaft holder part #????

[@1AAuto]

+Alex Velez Thank you for checking us out! We do not carry this particular piece, however you should be able to find this at a local part store. 1aauto.com

[@sergiosolis4003]

great videos. well done

[@jwa718]

So where's Part 1 of this series?

[@1AAuto]

+jwa718 Delete? kzbin.info/www/bejne/pX3Xf42YidyAqsU

[@volvotwoseries3384]

Great video. I just don't understand why you'd replace the sprockets. They don't wear out.

[@gilmo7131]

great video

[@johnsonking9211]

great vid

[@1AAuto]

Thanks for watching. If any of our viewers needs to make this repair, we carry the timing chain kit shown in this video on our website. Here's a link to them goo.gl/Zn8aN5

[@Stuntingonmycanam]

looks like an expensive bill ?

[@1AAuto]

+Jermaine.M Cain This video should help out with the repair. We also carry the timing chain set on our website. Here is a link to them www.1aauto.com/timing-chain-set/i/1atbk00100?KZbin&CTA+Comment&TCMvN20