How to retract electric parking brake on a jeep renegade

[@lonniemaize6718]

Very helpful info! Especially on a standard equipped model. Thanks for your helpful video.

[@christianrayford5802]

Excellant thank u. I'm seeing to many videos of people just manually compressing brakes without doing this.

[@becon5]

This is the most useful video i have seen in a long time

[@Maverick_HunterJ]

This is great info I’m glad I looked this up for when I need to do my brakes

[@Thewittyabout]

This info is like god sent, Thank you so much Sir. I have liked and suscribed i love my Renegade but when it comes to service manual there is next to nothing on the net. so your info it's extremely valued. thanks again. Greetings from Nottingham United Kingdom

[@willclarke4631]

You made my day, with this advice the rest was a piece of cake.

[@scottmacdonald6351]

This is exactly what I was looking for. Most useful brake video for this car ha.

[@seththemodder]

Thanks allmost broke the whole jeep over this!

[@4sl648]

Thanks! I made use of your tip tonight.

[@jodencro]

Thank you for this information.

[@danielhelman7256]

Tack så mycket. Ska byta på min bil imorgon👍😀

[@dmitriyp6056]

Every EPB at all cars has a two position switch one position for stop, and other one for releasing, so if you need to release press the switch down, if you need to brake - stop pull it up. The ignition must be on, and the pedal brake or gas be pressed.

[@mr.pumpkin2]

What do you think is my 2016 Renegade issue, I filled up my brake fluid and following morning. The brake pedal is hard to press, feels like booster is dead. Did over filling the fluid causes that?

[@fpatton]

brake booster check valve or vacuum leak somewhere in that system.

[@bernarddargie3142]

Awesome! video saved the day !

[@karljolley8346]

helpful, thank you.

[@jayhernandez6812]

Is this same thing for service auto park brake warning light for 2021 Jeep Renegade trailhawk also don’t have this setting on my car?

[@Servus-humilis]

What happens if you put the brakes in service mode and twist the caliper to put pads on? After changing pads the brakes will not go back out of service mode

[@jorgeglez4478]

Thanks for your time and nice video quick and informative 👍

[@Empress.420]

What if my screen is broken and I can't see anything, let alone tap on the screen? Is there another way to do this without having to go through this and change my rerar brakes anyway?

[@Catman1798]

Have anymore tips for a renegade? Servicing etc. I wanna know about changing the transmission oil. Other fluids other than regular oil changes. Coolant etc. not many videos about how to fix a Jeep renegade etc.

[@messinwithmr.wilson6678]

There really is not much you can do. The transmission can only be drained and refilled but you need specials tool to check the level. It is not recommended to be changed. Coolant is good for 10 years.

[@Catman1798]

@@messinwithmr.wilson6678 yeah I got that Dipstick tool from amazon

[@yugin7002]

I have a problem with epb on. Came out this morning and understood that I didn’t close the door of the car, so the battery died at night. I want to charge it with another car but the placement of jeep is hard to get to. Here is the question: How to turn off epb when the battery is dead, so I could relocate the car with my hands? Can’t do anything because the brakes and doesn’t turn off despite the battery died.

[@johnnycastillo132]

So my jeep showing light and feels fine got new front and rear brakes less than 4 months ago if I do this restart will it be fine or I should take to mechanic

[@rhphotocdn]

Great, but you should also tell people how to turn off the parking break without the radio. Say your radio screen is cracked or your battery is dead and can’t access your radio.

[@stitchedup431]

What do you if someone changed the factory radio out to an aftermarket?

[@messinwithmr.wilson6678]

you can still use a scan tool to retract them

[@jackiedeberry7179]

Won't go into brakes service mode

[@iliketocamp1342]

Once its retracted is the piston all the way in so you can install new pads or do you need to C clamp it?

[@messinwithmr.wilson6678]

Once it is retracted then you can use c clamp to compress.

[@iliketocamp1342]

@@messinwithmr.wilson6678 So no need for a special star head tool ? Just a standard c clamp??

[@messinwithmr.wilson6678]

@@iliketocamp1342 just a c-clamp to compress it. But I think the bolts to remove the braket may be an inverted torx?

[@iliketocamp1342]

Thank you!!

[@derekhoyle5371]

After watching this I was sure this was my issue Unfortunately there’s something different with my jeep, although I’m working on a Cherokee I went through the unlock/retract sequence and the piston is still seized up

[@lonniemaize6718]

Did not have that option on my jeep

[@chriscole7189]

Very usefull.

[@monkeywrangler5200]

Thanks man!

[@messinwithmr.wilson6678]

No problem. Glad it was helpful.

[@messinwithmr.wilson6678]

@Uriel Zaiden Glad I could help