my favorite part is 3:11 where you wear no mask, chewing gum with open mouth at outside, hoping for some small wind to breath in all the nice paint :D and then you hear the motto "spray like a pro in no time". BTW its a good video, it helpfull.
@tracieumbel2509 ай бұрын
😂😂😂😂didn't catch that😂😂😂to funny
@Mister2You7 жыл бұрын
Do NOT "Allow for significant time for the paint to dry before removing tape from your trim". That is wrong methodology. Remove any masking as soon as you are able to do so, that way the paint doesn't dry and peel pain from the finished surface along with the tape/masking. When it is still wet, it will come off with out damaging the finished surface and the lines will still be crisp.
@lynneacevedo66414 жыл бұрын
Thank you! Just bought my first house...painting is some bullshit
@niks9834 жыл бұрын
@@lynneacevedo6641 lmao painting IS some bullshit. We bought our house 5 years ago and painted everything with rollers. Now we are selling and need to paint everything white for resale....I guess people like a blank canvas and it looks bigger. I'm buying the 200 dollar harbor freight sprayer and not fuckin around this time.
@beautifulbritishcolumbia76553 жыл бұрын
Agree 👍
@jepp0711 Жыл бұрын
Exactly.
@user-rc8vb9zd4p7 жыл бұрын
some info for beginners helpful. cut in corners but go up an down not side to side unless u like stripes. I use graco 1095 highboy. run two guns. but rarely... I use 1221 tip or 1223 tip for Interior walls 2 ft fan hide lines. 310 or 312 green finish tips for all trim work. doors 515. exterior manly 517 side to side. but up an down for vertical running siding with a Texas two coat "back roll" I can spray a house out in one day if one person's in front of me masking windows or doors. only 2 people on job site. 2 easy days. 2 1/2 days for brand new Interiors....taking off doors an hardware, masking floors,cabinets, puddy nail holes, caulk all new trim n door casings, shoot trim and doors..reverse masking to protect trim work shoot body an then drape walls to blow out the ceiling.... easy right?
@skessaruddin9627 жыл бұрын
Joe Spahn can you tell me that what should be the psi(pressure) needed?
@Sms686 жыл бұрын
Joe Spahn Joe, I am looking for a Sprayer system now without breaking the Bank. I am doing my Detached Garage which is about 16w x 20L and is Gray Wood paneling right now. Any Info on a decent system. My budget is about 200 and I have a Couple Sprayers already. Thanks Joe Scott
@bac49986 жыл бұрын
SMS CUSTOMS Home Depot rental. They rent top line Greco airless systems
@awantikasharma19406 жыл бұрын
+Joe Spahn interesting points ,if anyone else trying to find out how to spray car paint try Sovallo Auto Painting Fixer ( search on google ) ? Ive heard some extraordinary things about it and my co-worker got cool success with it.
@kiahptrs12 жыл бұрын
if you have a thicker paint base you should pull your triming almost instantly so you prevent peeling!
@DavidSmithEverett7 жыл бұрын
This was extremely helpful. Thanks.
@Stevevan6412 жыл бұрын
Just bought a 3000 psi Wagner. This video is very good. Thanks a lot.
@cjspray11 жыл бұрын
If you have any general of specific questions on spraying, feel free to call us at 1-888-CJSpray or email customerservice at cjspray.com - we offer FREE technical advice and assistance should you have questions or run into problems.
@badalsawantdessai44895 жыл бұрын
How can I purchase this spray gun in Goa India🇮🇳
@jeagle2152 жыл бұрын
I've been spraying about 7 years now and can never get a pattern that nice. I've tried different tips, thinning, different pressures the lot. Even after full services. I have a 495 pc pro.
@dirkmcgirk112 жыл бұрын
That’s because you aren’t a painter sir
@jeagle2152 жыл бұрын
@dirkmcgirk11 what a ridiculous comment. I've been a painter for 24 years. Self taught at spraying like most but I struggle with it sometimes. Maybe offer a bit of advice instead of being a wanker.
@jmor22525 ай бұрын
Old video, but very fantastic instructions.
@sarorra7 жыл бұрын
Excellent instructions! Thank you!
@herbratamoeljo507610 жыл бұрын
To achieve the air pressure correctly, we can adjust the air pressure control gauge and reading the number on it. To achieve the width spread correctly, we can adjust the spreader adjustment valve and measure how width it is (by inch or cm). To achieve the correct distance between gun and the surfave, we can measure it (by inch or cm). But how to achieve the correct fluid debit or velocity? What is the best indication / direction in adjusting the fluid control and how to know if the volume of the fluid's spray is right and properly? (whether is too much or too little?)
@jazzman16269 жыл бұрын
Very good tips,thanks. I am about to spray paint my house exterior. It's just a bungalow, thank goodness lol
@TheHouheightskid8 жыл бұрын
Hey Jazz Man..... How did the bungalow spray project turn out?
@jazzman16268 жыл бұрын
Mike Anderson Sorry, I chickened out. I will get to it this year,though. I decided our bathroom needed refitting instead.
@chriskline80127 жыл бұрын
I like how right after they say dont angle the spray gun the guy is angling the spray gun while hes painting
@chelaash6 жыл бұрын
Exactly they contridicted them selves they suppose to angle their gun
@cubamarci43205 жыл бұрын
Lols
@cjspray8 жыл бұрын
Several people have asked about the model in this video, they do not show enough of the sprayer to identify. It is likely an X7 as people mentioned, but this video is meant as a general video to apply to Graco's line of Magnum sprayers.
@23183902 жыл бұрын
Thanks for the info. It's my 1st time and this is great help.
@-thefalcon-2 жыл бұрын
I got a coworker who is gonna love this video
@drosky3106 жыл бұрын
the best explanation on a subject on youtube answered many questions , thankyou
@zonedout59984 жыл бұрын
Instructions are on point. People actually painting in the video do not flex their wrist. 🤦🏻♂️
@joeyysossa41443 жыл бұрын
How much pressure were you using...for propper spray patern???
@terryblack59707 жыл бұрын
Good Video...Thanks...Very Helpful...
@justinandmistydevinaspre76964 жыл бұрын
What to do about splatters coming out when spraying?
@juliabarton57538 жыл бұрын
The spray can using the knockdown method
@hayderxyz04 жыл бұрын
Thank you
@YiftachC6 жыл бұрын
thanks man Ididnt know how to do it
@blackcat493457 жыл бұрын
Very useful. Thanks
@girlsdrinkfeck8 жыл бұрын
i dont know what inches are
@martinpattison89166 жыл бұрын
One inch = 25.4mm. It is an old fashioned unit of measurement still used in the US, particularly by the construction industry and Lockheed Martin.
@dean-gm1lg5 жыл бұрын
Its English measuring system still used in UK although metric is the norm now a foot is approx 300mm
@ericinxenia11 жыл бұрын
Thanks. Nice video.
@sivanandadas47614 жыл бұрын
Thankyou sir Thank God
@DirtyJobsGuy111 жыл бұрын
Great Video!
@chaoschief6 жыл бұрын
very educational!
@bmitsuca10 жыл бұрын
Does anybody knows the price for a.cheap spray gun ??? It would help a lot
@FrostTheMonarch11 жыл бұрын
Great thanks
@danallansarthou72 жыл бұрын
Always use straight for even coat?😁
@skessaruddin9627 жыл бұрын
Joe Spahn can you tell me that what should be the psi(pressure) needed?
@wing1wing25 жыл бұрын
THX
@lauraferogiaro578212 жыл бұрын
what Graco model sprayer is this?
@orbiebibbee9773 жыл бұрын
The fan should always be horizontal.
@mirooovuujjj79184 жыл бұрын
Grate video
@BloodTar12 жыл бұрын
@MrDuncmck Agreed. Painting contractor, 19 yrs.
@Maxkil7 жыл бұрын
BloodTar agree painter 10 years
@wowcompany10 жыл бұрын
good job
@MrDuncmck12 жыл бұрын
hasn't any of these instructor vids consider the idea of back rolling interior smooth walls.a drywall or plaster job is only as good as the paint job.plaster/drywall contractor 35 years.
@Maxkil7 жыл бұрын
MrDuncmck hey mate, 100% agree ! I have some drywall and paint spraying videos, one video, there are so many people criticising me for back rolling, some people are oblivious to this.
@brettlott5705 жыл бұрын
Ok so I'm not that off when I told my dad I should back roll the walls after the sprayaing just to blend or get any holidays.
@satyanarayanareddybommared30524 жыл бұрын
can i paint to my home with the sprayer
@darksbacon58564 жыл бұрын
You want a respirator not a dust mask this is for safety not annoyance
@ravitrinisha53464 жыл бұрын
Price
@jayakumarg8026 жыл бұрын
Is this enamel paint or is it white/colour wash content.
@mohamedismailsaleh10 жыл бұрын
how can I know the thickness of coat I sprayed,for example in some data sheets they recommend you to spray 35 micron .. ,so when can I stop and say that this is enough
@jacobmoreno9019 жыл бұрын
Mill guage you can get those at sherwin williams..
@duaneschul59909 жыл бұрын
Jacob Moreno wet mil gauge
@eamonodwyer67473 жыл бұрын
Is one coat enough should I cross coat on my interior walls
@cba83513 жыл бұрын
Nope minimum is 2 coats to have a better finish
@ricardodouglas38728 жыл бұрын
what thi is modelo ? xr7 ?
@Davyboi16906 жыл бұрын
My pressure isjnt good how do I fix it it's up high
@ionutionut23116 жыл бұрын
You need a regulator installed near the handle
@ramvachal78254 жыл бұрын
please tell me did the gun used comoresor
@SlotsxMyxThing9 жыл бұрын
Lol I spray commercial vehicles for a living and always seeing what techniques are out there but you can't use this because all the overspray will build up on the edges if you don't flick your wrist outwards to avoid overspray build up
@dovahzoh7 жыл бұрын
He said that in the video multiple times
@leoncaldwell55516 жыл бұрын
DovahZoh lo 99k9 Lolol 9kkmm l.p. l.p.
@shahidrizwan3584 жыл бұрын
plz tell how can i purchase this spray gun.
@bettymiss51587 жыл бұрын
great
@killabee623 Жыл бұрын
I see the pros flicking wrist and not releasing..
@wanelly5 жыл бұрын
Why I’m I still using a brush and a roller? Aaaaaaaaahh...
@remabegum97724 жыл бұрын
Hi how much is this machine in pounds plz?
@toddcrews32842 жыл бұрын
at 2:54 to 3.00 minutes
@vapidRush11 жыл бұрын
is there a price point recommendation or a brand. I have seen some at HD but do you have suggestion?
@SukhwinderSingh-ly2sx5 жыл бұрын
es ke Kiya keemt hai
@prashantthanait84794 жыл бұрын
Where i bye this machine in the qatar?
@sergejuscernauskas8 жыл бұрын
is it enough 24L air compressor 2.5hp 9.5 cfm to paint a house?
@cjspray8 жыл бұрын
We would not recommend it. You need at least 12-15 CFM at 40 PSI, and even that is low if you are painting a house. Our toll free number is 1-888-257-7729 (Monday-Friday 8am to 5pm CST) if you need any recommendations for your project.
@ericwatters83567 жыл бұрын
cjsprayinc
@mrbomberman891007 жыл бұрын
What model did you use?
@gopalsewag88423 жыл бұрын
Kha milti h machin
@Imtiazali-5656 жыл бұрын
How can't I get this machine
@matejskobalj67918 жыл бұрын
I have spent months studying spray painting and found a great resource at Magic Painter Method (google it if you are interested)
@djlifelike12 жыл бұрын
good video thanks
@kvamontjosefk.932110 жыл бұрын
Graco?
@collectionvideos35906 жыл бұрын
perfect paint your contact pls...
@mirooovuujjj79184 жыл бұрын
Where did you bay spry the gun?
@randallwildschut92872 жыл бұрын
I LIKE TO bay one we're can l Bay one
@vijaydahel64374 жыл бұрын
Praej Keya.hy
@marcostecpa5726 Жыл бұрын
Cómo limpiar
@PotrabukChanel4 жыл бұрын
Like'4,8 juta....
@ricardodouglas38728 жыл бұрын
model?
@brianbaxter77827 жыл бұрын
Question..I'm painting inside a warehouse,half the walls are block,no problem,but the other half is new board,which I already primed. The paint for the 12' walls is semi-gloss finish. How do I spray,so that it doesn't look like ass....Do I bankroll the semi-gloss? I think no...I will just make worst. anybody's advice much appreciated
@dirkmcgirk112 жыл бұрын
This dude is killing me. Spraying is an art. You, sir, do not have it. Stay tuned folks. I’m going to show the world how this is properly done and get rich doing it.
@abmohd94707 жыл бұрын
where to get this spray? i m doing house painting?
7 жыл бұрын
Are not sure if you're doing house painting? Why the question mark?
@haniefharun4 жыл бұрын
Harã Ferraz 🤣🤣🤣
@rajcontacter95565 жыл бұрын
Hi mujko msen cahey
@eduardotomfort11 жыл бұрын
Please, distribuidors Brazil, City. Tanks.
@syed53925 жыл бұрын
Trying paint on the wall???
@gopalsewag88423 жыл бұрын
Hy
@kanarimentos70569 жыл бұрын
i buy this machine but i dont like.t to much strong and dripping other machine i have is very good
@seancole69977 жыл бұрын
and what is that machine?
@kanarimentos70567 жыл бұрын
Sean Cole C800879 Power-Flo Pro 2800
@chandiuk857 жыл бұрын
Kanari Mentos can you suggest me which sprayer is better. Because i am using wagner at the moment but its not really that good
@nayebkhishavand50643 жыл бұрын
عالی
@purpleflower82608 жыл бұрын
the guy paint wrong he moves his hand not arm
@priyasachdev77818 жыл бұрын
ee
@toddcrews32842 жыл бұрын
x5
@elephantgrass6317 жыл бұрын
Dude.... CGI @0:37 lol.
@mikefalcon15 жыл бұрын
And a cheap one as well.
@baharulshaiad21469 жыл бұрын
b
@osamagad17102 жыл бұрын
I am founder of new company specializes in airless painting machine.we would like to send for you painting machine to be tested please feed us back about the machine. If you like the machine we would appreciate to make special KZbin video about it.
@fasi-ur-rahmankhan44774 жыл бұрын
V
@MBSK-xw4ff3 жыл бұрын
★★★
@brenthill559610 жыл бұрын
wtf..this video is how not to spray. must be the camera guys assistant spraying. spray from one end to the other without stopping so you don't have holidays all over the wall or that garage door.
@duaneschul59909 жыл бұрын
duaneu- dude you should always trigger your gun so you pump catches up, even if you have a great rig it will prevent wearing out your airless but we have occasions when you have long strokes but doors or cars you know.
@shawnmccollum39207 жыл бұрын
DirtyBanditabl e
@justbone217 жыл бұрын
There are so many errors made in this video it's not even funny.
@19perception836 жыл бұрын
What are they please? It's not helpful saying that then not pointing out what they are.
@chelaash6 жыл бұрын
Well plenty my husband sprays for living and actually is showing me. He always told my to spray keep it consistent not making so many different strokes. Examples up and down. And that's all this video he spray everywhere that's going to look blotchy. If it was out side then yeah you can do horizontal because depending on the crackes or details of the song or garage doors but just where you see the crack and continue to spray up and down. And the removal of tape should be removed like a couple minutes after not to long but if you do decide to wait to can pass the putty knife or a box cutter to where the line meets the tape and then slowly peal the tape away from where you paint not towards .
@jay00700700710 жыл бұрын
Thank you
@bmitsuca10 жыл бұрын
Does anybody knows the price for a.cheap spray gun ??? It would help a lot
@user-rc8vb9zd4p7 жыл бұрын
Mitsuca Benoit 200 bucks for a graco contractors series.