How To Time The Blades On A 30" Toro Timemaster Mower with Taryl

[@shalomsims]

Legendary video guys! Looks like I'm 7 years late to the cool club but ya helped me fix the timing belt on this big ol mower. Hit a dern dog rope buried under a foot of grass. Never buying a green rope again. Thank you!

[@1tiredcitizen796]

If it weren't for Taryl's mower videos my grass would be 6 feet tall. By watching him, I was able to completely tear down my 42" mower deck, replace the needed parts and while I was at it I also scraped and repainted the deck. Thank you Taryl.

[@jessemoreno7254]

I totally agree with 1 tired citizens comments!!! Without these videos I would of spent hundreds of dollars on repairs.. it took me like 15min to do it!! Great fckn videos!!!! Keep them coming man!!!!!!

[@alexiannelli4899]

Best instructional video I’ve ever seen !

[@johnvucharlotte]

makes you wonder if any real work gets done in this shop! :) haha

[@johnskinner1150]

My blades were out of alignment, but thanks to you, they’re back! Thanks Tarly!

[@jjr56991]

Just found this channel a few days ago and I love it. the skits are funny and entertaining, along with info and advice on making repairs.

[@bossmoney3855]

Damn I'm so grateful this video was made i didn't know what to do with my exmark 30 i pay for new blades but where touching after looking at this video it only took me 20 minutes to get it done and think that i was going to take to dealer and get fixed for lots of money . yeah his is toro time master and mine is exmark better quality but after looking at the components they are all the same to change or udjust the blades thanks again guy's for this video

[@IRVPIANODRIVER]

Enjoy all of your videos....you are truly a cornucopia of knowledge when it comes to lawn equipment. Thanks so much for sharing.

[@lafred2007]

Excellent. One the best step by step guide how to solve a problem. Cheers from Aussie

[@ftowles2001]

Thanks Taryl, I am demoing an old clunker today and need to do just what you taught us!

[@caseyobrien3447]

Taryl your videos are great and educational and there's your dinner

[@johnskinner1150]

Thank you Taryl, my Timemaster blades are now in timing!

[@paulwright2335]

Don't change a thing Great entertainment and Learning Channel

[@michaelglynn2638]

Pity the pipe didn't blow when Nate asked for used air. I've got some used beer if he needs it. Thanks boys, enjoyed it.

[@bleepnsheep2310]

Died laughing when he drank that motor oil.

[@ZombieDaveAZ]

Cheapskate Nate in looking for a used 2 piece flywheel key. lol. Nice video boys!

[@Shane-et6zv]

You guys are hilarious. Great job

[@chriskehoe406]

Best how to ever good stuff guys!

[@joshtheinflatableking]

Do you have any used belts that are snapped?

[@troutbum8699]

FYI toro suggests to fit a .25mm or .01 shim in between the bracket and the tension bolt on the belt tensioner.

[@lashlarue7924]

Thanks brutha man. Was derned near worried I donebusted muh lawnmower!

[@spacejam4840]

Thank you so much I fixed my exmark 30 . That pully you took off was different for me cause I had to take a top off for it. But everything else was the same . Thank you

[@joselimas9925]

Thank you, saved me some 💰

[@sirchomps]

Thanks for another great video! I'm with Van Harmon! You should charge people an extra 5-10 bucks to clean the crap out from under or on top of their mowers! I can't stand to get my hands on it. I don't mind the oil and grease! You know under the deck it's grass and dog s..t! And maybe some cat s..t too! Plus whatever weeds they have could end up around your shop lawn too! OK, I'm through with the rant.

[@Dinoxt12]

Taryl the master Mower Repair Man...there,s no mower he can't repair...Go Taryl.

[@rmpj13]

Fixed my Timemaster, THANK YOU!!!!!!!!!!!!

[@douglasgrilletto1522]

Still relevant thank you

[@Jim-ie6uf]

Something tells me Ronnie and Nate are related. Good video.

[@raymondcampbell2346]

Great Video as always Taryl and clan. I have seen the Time Master at a Toro dealer. I guess the 30" cut is suppose to save time. I haven't had one come in for repairs yet, but what I saw in your video, Toro gas taken a step back on quality with this machine and for $1000. I think I will stay with a regular Toro or Airens.

[@mattsfirewoodvideos738]

New sub here great Content and very helpful with a dash of funny 😄 keep it up fellas

[@adamdorris4081]

That used motor oil bit was some of the funniest shit I'd ever seen!

[@barbaraohara2995]

Harbor Freight air line !!! Lol. Love the videos bro . Gonna stop by when I go to the ponderosa sun club !!!

[@ClaySeaman]

Thanks for posting, did exactly what you demonstrated and fixed!!!!!

[@InDatParish]

Once the first 5 minutes of stupidity passed, the video was actually very informative

[@kd5byb]

How are the blades held to the spindle? I was thinking if I was doing this job, I'd just loosen the two blades from the spindles from the bottom and time them that way. But I don't know if Toro uses just a hole thru the blades and clamping pressure from the spindle bolt or those star-holes in the center? But even with the star holes, wouldn't that get it close enough? I mean it's a mower, not the space shuttle. ;) Which is one of my favorite lines of yours. :)

[@kd5byb]

Nevermind...I saw the two "nubbins" that the blade mounts into, so the above can't work.

[@transmitterguy478]

I worked for Sears Service in the '90s and almost every customer was a "Cheapskate Nate". They thought because they bought a tractor or mower from Sears, they got parts for free.

[@philliphall5198]

That’s a fact to You owe them the rest of your life 😢

[@exterminator1]

Great vid as always. I know several cheap skate nates here lolol

[@Matowix]

The customer could have had the decency to clean out the grass beforehand

[@neillien72]

Hey Taryl ! You are so cool , I wish i could come over to your shop and hang out with you and Jr.

[@leblond67]

Hello...I have a Troy Bilt 33inch walk behind mower 11.5hp Briggs...and today in tall grass the blades crashed together....got them fixed, but I can't figure out how to get one of them pulleys off for the cog belt to adjust the timing again. Pulley on the left side wont come off...either stuck or a press fit. I assume that's what I have to do to get it timed..I cannot find one video for my model machine in here to tell me what to do. Any help would be great. Thanks!

[@diegochavez9484]

Very nice video🙏🏼

[@zephr5]

Thanks I needed this.

[@timfillion4422]

yo listen I need your help can you explain to me I have a Suzuki King Quad 300 1995 every time we try to go over top end we clean the carburetor there's no guts wants to die the carburetor is not the problem could it be the ignition coil to CDI

[@jt2475]

My exmark 30 blades will spin freely both ways by hand. I don’t feel I have the torque in my blades that I used to. Do you know the cause?

[@samsacre]

That's my mower !!You got any ideas how I can get a little more power out of it for mulching!

[@ellag8885]

We replaced the tenisoner near motor that blew out after hitting a canvas dog toy. We replaced it and set everything and ran it to make sure. PUt shields back and ran the mower yesterday and nearly finished then the left pully bearing blew out. Why? cascading failure due to the tenisoner failing? Any advice?

[@newcoyote]

Didn't watch the entire video so apologies if this was addressed. Before going through all of the top end stuff, first, check the more likely cause of misalignment. There is a washer (called a blade adapter P/N 20199 20200) that fits into the blade above it. The two small holes on either side of the main drive shaft hole of the blade. It is like a mechanical fuse. If you hit a rock or whatever, pins shear off rather than the shock transfer to the drive shaft. Check that first.

[@antoniomoody1161]

Thank you

[@paulwright2335]

And the Oscar goes to Tara dekhta

[@lucaswaterhouse]

Have any used Carb Cleaner?

[@SinnerSince1962]

Perfectionists make less per hour, Taryl.... :)

[@johnsamuelson3234]

Doesn't anyone clean there equipment in Podunk? I bought one of the grass scrapper from ProParts they work great! Great video I've been thinking about getting one of those Toro time master mowers are they any good?

[@walter2670]

John Samuelson I had one a few years before selling. It worked great for me. Not good for cleanups or really overgrown grass, but works/cuts really nice on a well kept yard.

[@johnsamuelson3234]

Walter Welch thank you for the info about the Toro!

[@howardroberts4549]

I love my timemaster. Auto choke, auto self-propel speed, 2 height adjusters, easy flip handle. I use it for 1/4 acre residential lot.

[@andyk7217]

That was funny how the air line blew when you're filming, it's happened to me too...it can scare the crap out of you sometimes lol

[@lewiemcneely9143]

he needs to go to d.c. They have a LOT of WELL USED air there!

[@GreenPowerFarm]

Awesome!!!

[@jonathna11]

I timed them and rotated multiple times with it off. But when I turn on the mower and activate the mower blades they come out of timing again

[@jonathna11]

I did this and timed it. And when I go to activate the blades the mower throws them off of timing again. What can I do?

[@prevost8686]

That’s a great design if it was just built to commercial standards.

[@jensenwilliam5434]

Thank you!!!

[@fredb2129]

would you rexamend a john deere s240 or a john deere x330 which one is better

[@jakesnake_27]

Is that an old Clinton on that Interstate Battery rack?

[@grabbagmedia1031]

I accidentally lowered my Toro Timemaster 30/model:20199 onto a tree stump. Now only one blade engages. The other blade has no tension/resistance. Helpppppppp my friend! Thanks in advance!

[@jhitt79]

A masons margin trowel is the best tool for scraping grass off a mower deck. The offset handle keeps your knuckles out of the crap while being able to get the blade in there. Anyone who tries one will never use anything else.

[@baltazarjimenez4580]

Can you make a video about Toro Timemaster not charging properly?

[@leoo0076]

To bust the grass I use the biggest flat head screwdriver unless it’s wet grass then I use a dull razor blade

[@barkybarker2592]

I prefer a flat wooden spatula from Walmart to clean under the deck. Wood won't scratch the paint like your metal one can.

[@ZippoVarga]

Anyone catch Cheap Skate Nate calling Taryl Daryl? Zip~

[@VE1AXC]

That's what I tought I heard

[@Maik1968]

First time I saw a small engines specialist on KZbin clean the downside of a mower. 👍 Sometimes I would like to come in the internet in order to do that... 😂👍

[@suzrmx250]

What if the blades on the time master are scratching the sides of the deck

[@eduardochay9967]

Thank you very much mister it hapend a lot to my mower because i hit stombs, thank you very much agian

[@Ben-zh8bx]

The only thing I didn't see you do, but maybe you did, was to disconnect the spark plug wire from the spark plug before starting to work on it.

[@samsacre]

"Safety third"

[@jerrycannon6145]

The spark plugs is grounded bc the leave isn't engaged

[@MartyChristianSoldier]

Do all multiple blade mowers have to be timed?

[@TarylFixesAll]

Only certain ones

[@MartyChristianSoldier]

Thanks for getting back to me.

[@geojor]

thank you ...

[@LookAmongTheHeavens]

That must be Nate's walk behind , can't afford to spray it off for a buck

[@jmj267]

typical Toro powdercoat flaking off. They should take a tip from Areins.

[@fredflintstone8048]

Cheap Chinese air lines and fittings... Did Cheap Skate Nate sell em to ya?

[@TheDasFaust]

Looked like MTD Quill assemblies under dar!

[@MJorgy5]

Looks like he cracked the top of the deck too.

[@hunter7476]

my favorite part was when the hose busted lol maybe nat needed some used air hose

[@newt66c33]

holy crap clean it

[@Methodical2]

Somebody let the snake loose. Nice step by step video, very helpful, but damn tell the owner to clean that thing every then and again. Thanks

[@chrisgreer1911]

Could u not just unbolt it like you would if you sharpen the blades and do the timing that way Does it jump timing for no reason , i just sharpen the blades and put them back and then out of nowhere it clipped each other so i shut it down and seen ur video

[@27cornelius]

that air line got close

[@Pure_KodiakWILD_Power]

😬 Why did Nate drink the oil?

[@motoman5023]

too many of our customers buy these for commercial use. they fall apart so fast. they call me Mr 30 " at work because I work on so many.

[@janlabij7302]

The original concept was good. Then the cost analysts got their oar in the project.

[@robertluich5656]

If you're putting new blades on why don't you just take the old ones off then put them in a timing position you wanted them

[@karenreinhard9660]

11:32 is funny

[@evanesceful]

I love you dude, bro are those teeth really permanent? i wanna know so bad

[@Pinozcyclezandridez]

Mine wants to cut off in taller grass..like and an inch or more...shes under powered

[@dredger9mm]

Bang bang........Ow......

[@faithsandstrom3883]

As a female that has to do my stuff :( lol Get rid of the costumes But love the info

[@lynnh7694]

How do you remember all those part numbers. Time master... Lol

[@derekobidowski3301]

This Toro has the Briggs & Stratton its nitorious for problems because it has a plastic camshaft and timing gear in these which these always break. then the valves don't work in the engine. its very piss poor on Briggs & Stratton's part these are on Mowers and pressure washers these engines.

[@HammanD152]

Better yet, leave the cog belt cover off!

[@sergiorodriguez5249]

🚜🚜🚜🚜👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@Flaaaaanders]

Jaysus that mower is dirty underneath.

[@bairfamilyfarm1336]

Used oil looks likes chocolate syrup. But I bet it tastes as bad as used oil.

[@robertdavis6708]

I'm still laughing.......two crazy techs. with too much timemasters on their hands.

[@larryspiller6633]

Good Job Taryl. That is a poor design. Kind of like zero clearance valves on say like an old Ford Escort. Peace.

[@theguywhorarelylies5454]

What do you consider "old" escort? Because 90 models and up the manual says they are zero clearance engines...but its a lie I have probably cracked open about 300 of them to fix and never once seen Valve to piston contact from a timing belt break. Like Taryl says I DON'T CARE WHAT THE BOOK SAYS! Those damn escort do have a fatal flaw of dropping valve seats when they get some age on them and then the piston gets wrecked.

[@FishFind3000]

Maybe some used gas...