Do zhiyun plan on, or can they have a system that will allow the app to autofocus using the focus servos? I have a d850 which has god awful focus tracking and anything to help with that would be awesome.
@StephanRavendark Жыл бұрын
Will had the Focus peak and other focus tools in the next firmware update ???
@dougkingZim2 жыл бұрын
Hi I have just purchased the Zhiyun Crane 3s Pro which came with the COV-03 transmitter.. I have the COV-02 Receiver as well as the Remote and would like to sync the COV-03 Transmitter to the COV-02 Receiver. 01) is this possible? I have been trying with no success. I have an Atoms Ninja monitor and don't feel the need to purchase a MasterEye over and above, if this is purposely not an option by Zhiyun, I believe it is a big over site on their behalf as I use a number of different devices with my monitor and would prefer to only have to carry one monitor, so I would look at alternative products and sell the Crane 3s where I am not restricted. I have always gone with Zhiyun because of its functionality and there great compact design, but if I have to carry more equipment than what I require whats the point.
@shotbyjcontreras17 күн бұрын
Hi I can’t use my follow focus control dial on my VC100 and I can’t seem to update it to a newer version. There’s no option for firmware on the zhiyun website can anyone help???
@ilikespaceships5674 Жыл бұрын
hey is it posoble to connect only the camera to this rc without using the gimbal???,would be cool to use it as an monitor aswell
@alexluribe Жыл бұрын
all you need is the zhiyun ai transmitter
@TendyFilms2 жыл бұрын
Hi can I use mastereye visual remote control with my weebel S gimbal? I have transmitter for weebel S.
@scottpollock65492 жыл бұрын
No you cannot. This is only compatible with the Zhiyun AI Transmitter. Be very careful you don't do the mistake I did and buy a AI transmitter for the Weebill S as it WILL NOT WORK. The only reason to buy this MasterEye controller is if you have a Weebill 2, AND An AI Transmitter.
@TendyFilms2 жыл бұрын
Thanks very much
@jake30966 Жыл бұрын
According to Google it can be used with the Weebill S and the AI transmitter , it better as I've ordered the Zhiyun MasterEye Visual Controller .
@cemkar8782 Жыл бұрын
I have webill s and first transmitter they work together very well. But webill s with ai transmitter make little problem the Vc 100 works
@ДмитрийКоробов-я6ц2 жыл бұрын
Hi, would this remote work with weebil s? Rotation control, focus (CMF), etc?
@GSDHOMEINSPECTIONS2 жыл бұрын
Did you find out if it does work, if it does, is there are any features that don't work that should?
@cemkar8782 Жыл бұрын
Yes it works with Weebil S and cmf focus
@gilicodfilms9 ай бұрын
Does it work with a crane 4? and blackmagic 6k pro?
@BojanGashi2 жыл бұрын
Hi guys, I hope Ill get answer to my question :D I have problem with masterEye that not all functions are working :/ and everytime when I restart it different ones are working :P only screen and not possible to use anything, or no screen and just recording button and again next time just zoom buttons :O I tried to fix this problem but still nothing. Or is it my camera that is not fully compatible ? I have sony a7iii THANX in advance
@Seeloko Жыл бұрын
works only with zhiyun gimbals? I have a Moza Aircross 3.
@hebehe462 Жыл бұрын
Yes, it only can work with Zhiyun devices.
@doganumutmuzik Жыл бұрын
Hi. I can’t use motion control, F1 mode, ve gimbal modes. Can you help me?
@JordanChin2 жыл бұрын
Can it be used with a cable instead?
@PerroLandaeta2 жыл бұрын
will this Visual controller be able to work with the Zhiyun S3 ????
@mortimermouse Жыл бұрын
Cannot use the record button on Sony FX30 + Crane4. Shutter button for pictures works (albeit slowly and unreliably) but record for movies don’t.
@sebastianadam833911 ай бұрын
anyone have solution to this? Please?
@fundacionbpn Жыл бұрын
Hello! Is this controller compatible with crane 3 Lab?
@hebehe462 Жыл бұрын
VC100 can't work with Crane 3 LAB.
@PerplexityStudiosOfficial2 жыл бұрын
Is it compatible with the Crane 3s?
@deadendboredom2 жыл бұрын
Yes, you perhaps have to adjust one setting and then the controller is fully compatible with the Crane 3SPro
@YouMoustard2 жыл бұрын
Hello , I'm trying to use the Record and Photo Button in my Sony A7MIII , but I don't know why it doesn't work , may you help me ? , I would be so greateful if you could ... Greetings
@zhiyunsupportglobal7062 жыл бұрын
Hi! For Sony A7M3, 1. Please select "PC Remote" for your camera's "USB Connection". 2. For Sony cameras, after connecting stabilizer and camera with control cable, power on the stabilizer and then the camera. Make sure the camera is fully charged. Please let us know if you have any other questions. Feel free to DM me here: facebook.com/officialzhiyunsupport/
@wer4te95 Жыл бұрын
It´s compatible with Panasinoc Lumix DMC G7?
@hebehe462 Жыл бұрын
Doesn't compatible with Panasonic Lumix DMC G7.
@avobass7 ай бұрын
Greetings, Does anyone out there have experience with the VC100-Sony FX3 camera function controls? I am hoping the VC100 will control the Weeblii 3s and Sony FX3 via AI Transmitter while the camera rig is mounted to the bumper and the camera operator stationed inside of the vehicle.
@SebastianAdam_ro2 жыл бұрын
Hello! Is this controller compatible with other gimbals than Webill 2 Pro?
@JasonVendryes2 жыл бұрын
Just got a MasterEye this week. Works with my Weebill S
@SilverbackReviews2 жыл бұрын
@@JasonVendryes I bought the ninja V last week. I have the weebill s, transmit, and the focus motor. I'm thinking of exchanging the ninja v for the vc100 now. I just wasn't sure if it was compatible thanks.
@WuAhGestudioproduction Жыл бұрын
I have the masterye , weebill 2 and weebill 2 and I am using SOny A7IV. However, it does nto work as I am not able to control the camera setting when I am using it with any of the gimbal. Any help would be greatly appreciate.
@HellenLee-yz2oj Жыл бұрын
Did you connect with the AI transmitter also?
@WuAhGestudioproduction Жыл бұрын
@@HellenLee-yz2oj yes. Tried msny different cables too
@HellenLee-yz2oj Жыл бұрын
@@WuAhGestudioproduction There total need connect with 3pcs cables, two cables connect the camera with the transmitter: LN-HAHB-A04 and LN-UCUS-A02, and one cable connect the transmitter with the gimbal which with the yellow mark:Type-C to type-C LN-UCUC-A03.
@michaell83792 жыл бұрын
seem to have problem with Motion control mode. (mobile phone app motion control works fine). When using Motion control mode on Mastereye, gimbal still swings to the left, even when mastereye is put on a table. Got the Mastereye replaced, and it now swings to the right, when Mastereye is put on a table with no one touching it. Anyone has any suggestions?
@RiccardoPearlman Жыл бұрын
Can I use this to switch between two crane gimbals?
@hebehe462 Жыл бұрын
if want to switch between two gimbals, you need have two image transmitters, and need to make the reconnection.
@geovanihurtado82322 жыл бұрын
I have a question, how changed the sensitivity from the control ?
@cyfoel_yang9425 Жыл бұрын
Single press ISO Button to enter sensitivity parameter settings, then rotate the quick adjustment wheel to adjust sensitivity parameters. :)
@cemkar8782 Жыл бұрын
Hi i bought MasterEye but it don't record on SDcard.
@hebehe462 Жыл бұрын
You need to get the image transmission first, then press the F2 button to turn on the Screen Record.
@vinzaputra3 жыл бұрын
Is there any Hdmi out port?
@sebastianadam83392 жыл бұрын
Nope :(
@one.sevenstudio8064 Жыл бұрын
lag at 3:20 is so beutyfull 🥰
@encikthomas2 жыл бұрын
Hi. Does the Mastereye VC100 work with Weebill S? I have the COV-01 transmitter. Thanks.
@JasonVendryes2 жыл бұрын
works with my Weebill S
@zhiyunsupportglobal7062 жыл бұрын
Yes, Mastereye VC 100 can work for Weebill S, Weebill 2 and Weebill 3
@jake30966 Жыл бұрын
Will this work with the Weebill S ?
@chenlyn-cj8ve Жыл бұрын
I only know that the VC100 can work with CRANE 3 Lab/WB3/Crane 3S.
@cemkar8782 Жыл бұрын
It works with webill s. I have one
@HellenLee-yz2oj Жыл бұрын
It work with the weebills, but it need connect the camera which in the compatible list of weebills and Zhiyun transmitter.
@kb37253 жыл бұрын
Can you give zhine smouth Q2 foor revieu
@dronesrj403 Жыл бұрын
No HDMI out?
@hebehe462 Жыл бұрын
Nope
@davetinoco2 жыл бұрын
Does this work with the Crane 3S?
@ZhiyunTechGlobal2 жыл бұрын
Hi David. No it can't work with C3S.
@STUDIOJBAph2 жыл бұрын
@@ZhiyunTechGlobal Will it ever be compatible?
@deadendboredom2 жыл бұрын
@@STUDIOJBAph Well it already is, I had exactly the same question and then I took a risk. If you have the Transmitter AI it will work. Because I couldn't find the information anywhere, I just made a video about it
@STUDIOJBAph2 жыл бұрын
@@deadendboredom oh great, I was hoping to use the joystick!
@STUDIOJBAph2 жыл бұрын
@@deadendboredom freaking awesome dude thanks!
@harshrathod3102 жыл бұрын
i wanted clean hdmi out from this reciever so that i could. connect it to switcher
@MrTaczyk2 жыл бұрын
I need that too. Is it possible or is it possible to catch it and view it on PC so I can send clean hmdi to switcher?
@pr1sm552 жыл бұрын
Why is the video so laggy?
@pr1sm552 жыл бұрын
Video Signal"
@คนไทย-ล5ฌ3 жыл бұрын
👍🇹🇭🇹🇭🇹🇭🇹🇭👍🙎♂️🙏
@heznadastudios3 жыл бұрын
Would this work with Crane 3s?
@mattpallotta2 жыл бұрын
I have a Crane 3. not everything works for me. Focus, zoom, and joystick do not seem to work. Or at least I can't figure out why.
@heznadastudios2 жыл бұрын
@@mattpallotta O yes I had to return it too it didn’t work as expected with my crane 3s
@mattpallotta2 жыл бұрын
@@heznadastudios Glad you did that. I think I am just outside the window for returns.
@mattpallotta2 жыл бұрын
I found out my issue the Gimbal. I reread the manual. When using the Transmitter AI, I failed to read where I had to switch the Gimbal Camera Setting to cca from the camera one. Once I did that I got the controls I was looking for.
@heznadastudios2 жыл бұрын
@@mattpallotta Yes I did all that and it worked but the focus function didn't work for my Bmpcc 6k pro as the usb port was where my ssd would go and that was what the device wanted to use for camera controls