How to fix dL Error Code | LG Top Load Washer | Replace Lid Lock Switch | WT7800CW Washing Machine

[@RoyAguilera23]

Can confirm that the 02 works. Just ordered the 04 and LG sent the 02 as a replacement. Installed it and it is working.

[@HowtoandReviewsOfficial]

Awesome! Thanks for the update, it is very much appreciated! I will pin this comment and add the information to the video description. Thanks again!

[@stodgo8095]

Nothing, I got the part, I changed (pain in the ass) it and not results, same freaking shit, next step I think is call a freaking technician and pay between $300 to 400 dollars, I know what he's going to say " YOU NEED A NEW MOTHER BOARD, frustrating...😤😤😤😤...thx anyway.

[@PAYNEKILLER..]

Thanks for this

[@samanthatadje6352]

Thank you so much for saving this mom of seven from going more than three days without a washing machine! I ordered the 02 from Amazon, and it works like a charm. The video was so helpful, I was able to replace the locking mechanism on my own while the hubby was still in meetings. You saved my sanity and laundry room from being stuffed to the brim with dirty laundry!

[@HowtoandReviewsOfficial]

Awesome! So glad it was helpful!

[@bradeversole4081]

I love that this kind of stuff is available on KZbin, this will help me fix this issue for $23 instead of a $150 service call. Thanks man. 👍🏻

[@HowtoandReviewsOfficial]

Awesome! Glad you saved some money!

[@mojob.1222]

Thanks!!! Great video. I just fixed it without taking off the lid thanks to this video! Great work. You're still helping in 2023

[@HowtoandReviewsOfficial]

Awesome! Great job! Glad the video helped!

[@EllaSchimschal]

Thanks so much for this video. Used it tonight and replaced the door latch in about 20 minutes. Saved us a bunch of money!

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@davekramer161]

Thanks you!! This saved me time and a lot of money. It cost $30 and got it from Amazon 2 days. Mine wasn’t exactly the same but real close. Awesome job!

[@HowtoandReviewsOfficial]

Nice! Glad it was helpful!

[@JimBob-wi3rq]

Nice vid! Currently losing hair over my lid that also had screws. Why on earth would they do that!?! Figured I could replace switch without removing lid, but glad to see you video that demonstated the thought I had.

[@HowtoandReviewsOfficial]

It was pretty straight forward. The worst part was trying to film it. It should go smooth for you!

[@sofoniasmondono4774]

Best step by step video I’ve ever seen

[@HowtoandReviewsOfficial]

Very much appreciated! Glad it was helpful!

[@JadeReedbeats]

Just a dad in Iowa saying thank you. Doing gods work over here!

[@HowtoandReviewsOfficial]

Awesome! Glad it was helpful!

[@JadeReedbeats]

@@HowtoandReviewsOfficialgot the part and installed. It works!

[@bethkellett2340]

Thanks sooooo much for this video!!! The hubby & I were able to fix our washing machine & didn't have to purchase a new one. You video was very helpful!!!! Thanks

[@HowtoandReviewsOfficial]

Awesome! That’s perfect! Glad it helped!

[@bygtymr]

Just swapped mine out and works great, thanks for making this video showing how to do it w/o taking the whole washer apart. Took me an hour and I’m not super handy

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@brandtsweet]

I love this video I just found out if you look at the front top corners on the side of the washing machine, Both sides, you're gonna see a small white cap. Pop those take the screws out and you can lift the top of the washing machine..

[@HowtoandReviewsOfficial]

Awesome! Thanks for sharing this!

[@brandtsweet]

@@HowtoandReviewsOfficial If you would like an update, everything went in smoothly and successfully, I would not have had a place to start. Had your video not existed, so thank you, sir

[@sylvias4231]

Thank you a VERY VERY MUCH! I was able to fix our washer thanks to your video!!

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@nursingnotes212]

I really appreciate this video! I have the exact same washer as you have, and your video was easy to follow. Like you, I had trouble finding the 04 model, but I was able to overnight ship the 02 model from Amazon (gift card I had saved took a chunk of change off the price!). I replaced the lock switch today. I was sick when I did it, so I had to take a few breaks in the middle to lie down. Actually, I was halfway through the install when I realized I was installing the old lock. I probably wouldn't have noticed if the model numbers weren't different, so glad I went with the 02 model. Also, I got the washer used, and the previous owner actually put the lock wire under the support bar, attaching it with one of the blue clips. The way they positioned this clip, the part that you squeeze was on top instead of the bottom, and I spent a long time trying to slip my needle nose pliers into the gap to squeeze the top. I actually ended up breaking it. Luckily, the old owner also used wire to secure the wire from the switch, so I made use of that and pulled the wire through so there wasn't any extra slack. The way the old owner had it set up, it worked for me for about a little over a year, so I'm fairly optimistic. When I called the LG repair people, they quoted me $400 just to come out and look, and their soonest availability would have been a week out. Thanks to your video, I saved a bunch of money, and I've been able to do the laundry for the first time in two weeks. Thank you!

[@HowtoandReviewsOfficial]

That’s great to hear. I hope you’re feeling better!

[@masonfeathers315]

That was the most informative easy to follow along video ever!! My brother and I fixed it no problem!! You just saved me a lot of $$$$$! A+++++ video!!

[@HowtoandReviewsOfficial]

Awesome! Glad you saved some money and got it working again!

[@mire118]

I bought the item with the link provided and it was exactly the part needed! This video was very helpful. It was a bit different since my model is an LG WT7300CW, but I made it work!

[@HowtoandReviewsOfficial]

Awesome! Glad it worked, and glad the video was helpful!

[@justinshay9122]

Thank you for video. Despite the challenge working with big hands in the small space, got the replacement installed and am back in business. Mine had tiny twist ties holding cable so I had to replace with thinner guage wire to securely hold it in place. Wasn't confident it eould work, but all is good. Many thanks.

[@HowtoandReviewsOfficial]

Excellent! Glad it helped, and thanks for the update!

[@alyssaashley8841]

Thank you for this video, your instructions were down to the T. I was able to replace mine with ease, much appreciated

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@billallert9963]

Thank you so much for posting this. Repaired my washing machine because of it for just the cost of the part! Not going to lie though - getting that damn switch to come out of its socket took a LONG time. But got there in the end and it's working a charm! I also took the top panel off to make things less fiddly but that was just my preference.

[@HowtoandReviewsOfficial]

Glad the video helped, and glad you got it sorted out!

[@nezihsabankaya384]

Great job that’s exactly what my washer’s problem thanks

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@Ona-vd8ri]

Thank you for this video. We were able to fix our washer ourselves saving at least $100.00.

[@HowtoandReviewsOfficial]

Thanks for the update! I’m happy to hear that; that’s exactly why I make these videos! Glad it helped!

[@Xnibblet]

Thank you so much. You are a lifesaver with a very good step by step video.

[@HowtoandReviewsOfficial]

Glad it helped!

[@claytonworthen]

Saved me a lot of time with this video. Thanks!

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@pmgear]

great video, thanks for taking the time to educate your fellow DIY:ers and helping us save a buck and tons of time

[@HowtoandReviewsOfficial]

Glad the video helped!

[@rdprdputube]

Is there a lid positioner that may be faulty as well?

[@1stgod54]

I have the same washer. Mine wont start im assuming because the lid wont lock. Any help you can offer would be greatly appreciated 🙏

[@1stgod54]

475$ later it was the computer mother board

[@karenharbin4184]

My washer is about 2 and a half years old and the DL switch is bad. However, my washer is the LG WT7900. Do you think the same part you used will fit mine?

[@shonamarietouey6519]

Will the dl problem go away if I just remove the switch?

[@ismaelrodriguez1337]

Will the same replacement part work for model number WT7400CV?

[@HowtoandReviewsOfficial]

I’m not sure.

[@karenpennington5073]

Boy did you save yourself a lot of trouble,I’m trying to replace mine by following removing the top,and I’m a stubborn woman.

[@HowtoandReviewsOfficial]

LOL! I’m sure you will get it handled. Good luck!

[@benaatkins6295]

Great video my guy! Thanks ! Helped out so much love the detail you give

[@HowtoandReviewsOfficial]

Awesome! Glad it helped!

[@marcelosalussolia5349]

Thank you for your video ! It is so helpful! You are a legend .

[@michellejuerschik6406]

You champ, thanks so much! Saved us several hundred much needed dollars!

[@HowtoandReviewsOfficial]

Awesome! So glad it helped!

[@AimGobalWorldBibleSchool]

Good Job man...Thanks for the tip...

[@briancurtis-music]

Thank God for the reverse camera on my phone or I would have never gotten the screws out, or possibly dropped one in between the frame and wash tub because my lid would not open either using a putty knife. I was able to repair mine using your advice. Thanks for the video. Model WT5680H*A

[@yusufhuman7098]

Heeey , really amazing job.. i have a washing machine with a much older model ( T1809ADFH5 ) , with the same DL error code, would this lid locker that you used fit with my machine’s model? Bc I consider purchasing it .

[@AmericanCarnage]

Is the DE code caused by the same switch?

[@citymanagements7319]

Thank you. This was very helpful

[@HowtoandReviewsOfficial]

I'm so glad!

[@kimberlybriggs809]

Thank you I’m going to try this

[@maureenhaisten2178]

mines plugged into mother board so I might just trash this thing great video I did everything else fine.

[@thedetectivebm]

This was very helpful. Thank you for sharing.

[@HowtoandReviewsOfficial]

Great, glad it helped!

[@yiqingzhou5172]

this is very helpful, you are doing a great job !

[@HowtoandReviewsOfficial]

I appreciate it, glad it was helpful!

[@bagnon]

REMOVE the LID following the instructions shown on video n5p3VuPEHF0 "How to Remove the Top Cover on a Kenmore or LG Top-Load Washer" where you just need to remove two extra screws in the back then lift and slide, don't try to pry it open from the front with this model. I could not get a normal scredriver to reach the zip ties without it removed and my hand was too big to get in there, so remove lid and have a helper hold it to prevent stress to harness.

[@HowtoandReviewsOfficial]

Awesome!

[@Mr1976impala]

Thinking about buying one somebody has for sale and they too said their lid isn’t locking.

[@HowtoandReviewsOfficial]

If they are selling it at a low cost because of this problem, that would be a great opportunity. It is inexpensive and easy to fix yourself.

[@BeyondAldebaran]

Thanks, this helped a lot 👍🏻

[@HowtoandReviewsOfficial]

Glad it helped!

[@muzafarali9607]

please give me some understanding about this i also want to do this

[@HowtoandReviewsOfficial]

Every detail is in the video.

[@alondramacias6059]

Do you know why that part malfunctions? this is the second time it happens to me

[@HowtoandReviewsOfficial]

My guess would be it’s just a cheap motor inside that fails prematurely.

[@theshaddocks5605]

Very nice and helpful video.

[@HowtoandReviewsOfficial]

Great, glad it helped!

[@swaggerchri5]

Excellent and very helpful video

[@HowtoandReviewsOfficial]

Glad it helped!

[@brianthomason6475]

I just took the white box apart and there are two leads that need to make contact at different times when the lock is sliding. My contact points were corroded. I scraped them real quick with a mini flat head and now it works. Bad thing is I lost one of the two screws 😂. Hopefully it got tangled up in the clothes already in the drum.

[@HowtoandReviewsOfficial]

Awesome! Thanks for sharing! I considered disassembling my broken switch to see what was going on inside. And possibly repairing and keeping it on hand in case I need it again in the future. But, I didn’t… thanks for opening it up and sharing the results!

[@brianthomason6475]

@@HowtoandReviewsOfficial mine was clicking like 10 times so I knew something still worked. I thought it was misaligned and not sliding all the way in so that was the only reason I took it apart. The 2 leads looks like the solder popped off but the sliding lock actually moves it off and on, up and down, depending on different sections of the slide. Great video!

[@matcha-latyay]

thanks for the vid! was super helpful and just what i needed since i also need to replace the switch on my machine, did you ever find out if the EBF61674804 and EBF61674802 parts are interchangeable? the -04 are harder to find and def pricier 😅

[@HowtoandReviewsOfficial]

I emailed a couple washing machine parts websites asking if they are interchangeable but didn’t receive a response. If you find out, let me know and I’ll add it to the video description!

[@ryanmcquighan7298]

I tried the 02 and it worked! Much cheaper too: amzn.to/3C9YFPb

[@marithesabad5612]

thank you,,,,,,now see if i can do it

[@jaylee8613]

I Switched the lock did not fix the issue bought a second one same thing error still on NEED HELP

[@HowtoandReviewsOfficial]

Unfortunately, I do not have any additional experience or advice. I had a whirl pool washing machine a few years ago with an error. I replaced the part twice and it didn’t fix it. I had a repair person inspect it, and they agreed that part was the problem and recommended to try replacing the part one more time, because maybe the first two were defective. Third attempt didn’t work, so I bought a new washing machine. Unfortunately, that’s how it goes sometimes.

[@TJJS982]

What about an oe error?

[@Kiki.shannan]

How much was the switch

[@HowtoandReviewsOfficial]

I got it on eBay for $27.48. I also saw new ones online for $45 or more.

[@wisdomwisdom817]

Awesome job thank you so much

[@HowtoandReviewsOfficial]

Glad it helped!

[@chesterbanks1232]

what if the latch isn't catching

[@HowtoandReviewsOfficial]

That sounds like some type of alignment issue. If your sure the lock works, but doesn’t go into the hole, try to determine the misalignment and the cause.

[@chesterbanks1232]

@@HowtoandReviewsOfficial I got it. Had to Bend a little bit

[@chesterbanks1232]

Thanks. This was a Big help. They wanted 90 buck for the part and 150 to put it in. Did it myself for 40 bucks.

[@davidburke6225]

Model # WT1101C 740

[@JEFFREYSOLORIO]

Having this issue again not even a year after LG fixed it for the same Lid error issue. I'll never again buy LG.

[@HowtoandReviewsOfficial]

It’s hard to trust any brand these days. I switched to LG because my brand new front loading Whirlpool died after one year. I’ve been happy with the LG so far. I’ve had it for almost 3 years and I suppose I’m OK with throwing $30 at it for a lid lock switch.

[@maureenwatkins7934]

Do not suggest purchasing from the Amazon Link included above - I did and been 3 weeks and still hasn't shipped - cancelled order and will search for the part myself. Great video though, thanks.

[@HowtoandReviewsOfficial]

Good to know! Sorry to hear that! I will double check the links and see if they still make sense.

[@rmalus10297]

THANK YOU!!!

[@katikasecky4621]

You saved me 🙏

[@HowtoandReviewsOfficial]

Glad to hear it! Glad it was helpful!

[@me-qg6hc]

Thanks!

[@HowtoandReviewsOfficial]

You bet!

[@ajisl.3671]

Thank you so much!

[@HowtoandReviewsOfficial]

Glad it helped!

[@SlattonStandard]

My lock is on the side, not the middle

[@HowtoandReviewsOfficial]

I hope you got it fixed!

[@muzafarali9607]

Hi

[@hamfistsman6267]

I have to take my washer completely apart to get to the door lock. Ridiculous. I don't even want the door lock.

[@HowtoandReviewsOfficial]

That’s brutal. Good luck!

[@IJustWatchYouTubeAllDay]

man crazy that part failed in only a year or so....

[@HowtoandReviewsOfficial]

Yeah, that doesn’t seem right. But, luckily it was a cheap fix. I think the used one I bought has lasted longer than the original one.

[@GhostPepper233]

I would drop all those screws and wire down between the drum which is luck in life.

[@HowtoandReviewsOfficial]

I highly considered using a magnet, but I was feeling lucky that day and I made it without dropping anything.

[@mbb8111]

My LG washer is the biggest piece of shit...motherboard goes, rusting on the inside and now lid lock switch error. All within a year and a half

[@HowtoandReviewsOfficial]

Oh wow! Mine is almost 2 years old and is still doing ok (other than the lid lock). I had a poor experience with whirlpool, which is why I switched to LG this time!

[@stodgo8095]

Thx bro, very, very, very helpful video 👍👍👍subscribing right now... update: mine doesn't have those blue clips and has a black tube that goes around, your doesn't have that black tube, 🤔🤔, mine uses the 02 part which is way cheaper, waiting for the part to install it...thx again 👍👍

[@HowtoandReviewsOfficial]

Glad the video was helpful! Below is the link to the switch from the manufactures website. It’s also available through several third-party websites if you Google search EBF61674804. lgparts.com/products/ebf61674804 I personally got a used one from eBay for about $20. Let me know how it goes!