Husqvarna 455 Rancher oiler high output mod

I've had fits with the oiler on my Husqvarna 455 Rancher, the same oiling system is on the 460 and possibly other models too.
After ruining many a bar and chain, I found a guy online that says he has the solution, lets give it a try and see if we can make this saw oil like it was meant to!
Piston stop tool: amzn.to/3wCE4nP
Clutch removal tool: amzn.to/49WPMaY (use this instead of a punch and hammer)
New oiler should your saw need one: amzn.to/3OZbRNZ
Become a channel member to get early access to videos and help support what I do:
/ @trythistv
Links here are most likely affiliate links, should you choose to purchase from one of them, I may earn a small commission for referring you to the seller. And, this is done at no extra cost to you!

[@trythistv]

Here is what you need to get this done on your saw: ➡Piston stop tool: amzn.to/3wCE4nP ➡Clutch removal tool: amzn.to/49WPMaY (use this instead of a punch and hammer) ➡New oiler should your saw need one: amzn.to/3OZbRNZ Links here are most likely affiliate links, should you choose to purchase from one of them, I may earn a small commission for referring you to the seller. And, this is done at no extra cost to you!

[@rooster3019]

Interesting, I do not have a 455, but my 572 might benefit as it is a bit drier than I like with the oil rate setting at max even with Husqvarna's all weather type bar oil.

[@trythistv]

Looking at the 572 oiler pictures I can find online, it looks vastly different at first glance but after looking for a minute I think it is the exact same pump just with a very different looking frame, I bet you can do the same thing, just might be a little harder to get apart