Husqvarna 435 Oiler upgrade

There are a lot of husqvarna saws that use the same type of oiler, relying on a small roll pin in plastic to keep your bar and chain lubricated.
From my findings it is possible and easy to upgrade to a more robust style of oil pump that is adjustable and doesn't run the risk of the roll pin falling out of the plastic housing.
Here is what you'll need to accomplish this:
Stock style high output pump: amzn.to/3wTk542
455 style upgrade pump: amzn.to/3IuKeJ3
M5x16 Screw for 455 style pump: amzn.to/3v6YLYr
Piston stop tool: amzn.to/3wCE4nP
Clutch removal tool: amzn.to/49WPMaY (use this instead of a punch and hammer)
Become a channel member to get early access to videos and help support what I do:
/ @trythistv
Links here are most likely affiliate links, should you choose to purchase from one of them, I may earn a small commission for referring you to the seller. And, this is done at no extra cost to you!

[@trythistv]

Here is what you'll need to accomplish this: Stock style high output pump: amzn.to/3wTk542 455 style upgrade pump: amzn.to/3IuKeJ3 M5x16 Screw for 455 style pump: amzn.to/3v6YLYr Piston stop tool: amzn.to/3wCE4nP Clutch removal tool: amzn.to/49WPMaY (use this instead of a punch and hammer) Links here are most likely affiliate links, should you choose to purchase from one of them, I may earn a small commission for referring you to the seller. And, this is done at no extra cost to you!