I Bought The CHEAPEST Angle Grinder On Amazon!

[@BigBoyJay_69]

Sparks flying everywhere, gas can in the back, wearing shorts, and no care in the world. Never change.

[@TheFeltmeister]

He said the gas can has been empty for months in a comment below

[@michaelmardling3152]

And wearing Slides, because why wear footwear that fully covers your feet when using power tools and dropping stuff.

[@fskartingco.1055]

@@TheFeltmeisterthe fumes are more dangerous than the actual gas, mythbusters did a bit on it like 2 decades ago

[@David_barnes55]

In his defense he's really not that intelligent

[@vladdevener5586]

​@@michaelmardling3152 ah holly shit LOL.

[@mike_0213]

LOL I just picked up the CHEAPEST angle grinder from Harbor Freight for $9.99 on sale from $14.99. Seems a better deal then the $50+ you spent on Amazon.

[@ksavage681]

Now those are good. I restored a car with my cheap Chicago Electric, no problems at all.

[@mike_0213]

@@ksavage681 nice, it was the first one I bought. I was looking at the DeWalt compact cut off wheel but $141 for just the tool was too much because I’m not going to be using this a lot. I just wanted it in case I need it one day. lol

[@GeorgeT6566]

I have one of them from Harbor Fright it's 3 years old and still running. I use it all the time. They was only 9.99 when you bought more then 50 bucks worth of stuff you got the deal on the grinder. I did not think it would last more then one or two uses but so far I been wrong about the junky little grinder.

[@mike_0213]

@@GeorgeT6566 That's great to hear. I did not want to buy an expensive one because really how much am I going to need to use one. I just wanted to have one for the times when it's needed. yea it was on sale with coupon. Only issue I saw was the disc would hit the guard no and then, but I did not really mess with it yet, I just got it Thursday.

[@shaneh7519]

I got the $14 Harbor freight grinder for wood carving. I’ve abused the shit out of it over the last month and it’s still going strong.

[@GadgetAddict]

For anyone looking for a cheap angle grinder, go for the corded type. Even a $15 corded angle grinder can do the job.

[@choccolocco]

Yup. Grabbed one at HF for $10 for a spare, has been a pretty decent grinder. Also, I have a ryobi cordless purchased for $50, no battery, that works very well.

[@toxictrumptube7763]

Didn’t expect to see Tyler with all his fingers still attached at the end of the video! Well done!🤘🏽

[@Justachamp772]

Fr

[@calvinbarnes1721]

it would have stalled out before he lost anything

[@vladdevener5586]

😅 lol.

[@ogdenatwood161]

As a testicular cancer survivor, much love for raising awareness

[@ihackedurgf]

Hope you’re doing great!

[@davegarber]

Project farm for business, Tylertube for party! Tyler is the best thing to happen to KZbin!

[@researching-with-will]

Oh that's for sure, always look forward to his videos !!

[@Kitteh.B]

Tylertube confirmed the mullet of KZbin channels

[@DCVinson]

Wrong. It’s painful to watch the uneducated try to educate people.

[@iamcerridwen]

Literally saw this and said to myself, "Thank God, another Tyler video" lol I genuinely always look forward to these videos, you're such a hoot to me 😂

[@No_Worries83]

Did anyone else notice the can of gasoline near all the sparks? 6:00 😂

[@bang2020]

Yeah this guy is has been touched with the tisim

[@RichardJamesWellingtonIV]

It was shooting the opposite wait of the can????? It’s not going to do anything

[@PeterBee911]

12:43 When she complains that you're too rough

[@mra3149]

Better off with a Fisher Price 'My First Tool Kit' 😂

[@ScammerBoy-l2s]

Bruh

[@FlyboyHelosim]

It's always a good start when everything's just chucked in a box.

[@psilocin6739]

All 18v and 20v (Milwaukee and DeWalt for example) tools are the exact same voltage, it's just the marketing. They both have 5 18650 batteries in series. The difference in a good battery pack is the peak amps it can draw, and the capacity (how long it will last). Of course there's other factors but those are the basics.

[@gabest4]

It's usually the nominal 3.7v that is used. Fully charged 4.2v, that's why he measures more. To calculate capacity, you do 3.7v * X mAh, it's the closest to reality.

[@deadly_dave]

@@gabest4 This is correct, however, neither of those values are the reason the tool is stalling. The voltage will in part determine the speed of rotation but the stalling is happening due to a loss of current, which is usually denoted by the C rating of the battery. The C value will tell you the amount of current the battery can dump into the tool at any one instance in time or as the OP said peak amp draw. Even a good tool with a sucky battery will be sucky.

[@refactorear]

Indeed. In America they call it 18v, in Europe they call it 20v but it's exactly the same. I think there was a legal reason for that.

[@deadly_dave]

@@refactorear This is not correct, it's marketing and brand specific, not region specific.

[@DCVinson]

⁠@@refactorearno it is 20v in the United States and 18v Europe. You have it backwards. I live in the U.S. and own about 25 batteries. I can assure you they are all 20v here.

[@RodgerL-s4m]

Love the sparks and Gerry can right behind him. With a spout.

[@Okurka.]

What can?

[@ndunwoody]

8:50 it's kinda funny how all the sparks are showering over the gas can.... Lol 😂

[@gernhartreinholzen3992]

Tyler's guardian angel must be really burned out, because he's working harder than any of his colleagues. HE NEEDS A BREAK, MAN! 😂

[@adamhell1226]

I suggest testing portable/personal air conditioners.

[@jbrandomclips6175]

Tyler I have a video suggestion. Could you do a test for cut resistant gloves and the different levels of them and see which one can handle the most extreme cuts even with angle grinders.

[@Pinkooru]

Safety is becoming a real concern.

[@davidhudgens499]

20:04 DAMN… 🥺😢 You didn’t have to bring that up.

[@dementedproductions87]

The grinder is amazing, you're just doing it wrong remember.... 🤣

[@nissenenokin7537]

17:08 Maybe the sawblade cuts better if you install it correct? Try to use this machine with 18v makita battery, it works

[@jolde3000]

I have a 20$ cordless and its usable with Makita batteries, but the knock offs dont have enough juice

[@Martinchox]

Please tyler, stop spoiling the video in the first couple of seconds

[@majormushu]

Blame tik tok for that. The new concept of shorter videos means you have to hook people in within the first 10-15s or they will leave. At least he doesn't do the 27,000 jump cuts that have also been shown to increase viewer retention.

[@joshuasteele5108]

This ​@@majormushu

[@ShelbyWatson-bx8fw]

I agree 100% but still watch it to see the shenanigans.

[@DG-mi2mc]

Yes.

[@Floofie_boi]

​@majormushu well why would I stay for the entire video if the entire video is just spoiled? that seems like a really shity way to retain viewers.

[@gernhartreinholzen3992]

*How* is it possible, that you still have all your fingers? I swear, there are people way more cautious than you with fewer digits!

[@wesstokes9282]

Skill issues

[@bradley9856]

Tyler, 20v and 18v batteries are the same thing, one is maximim voltage and one is nominal

[@Zaque-TV]

Everything is a goddamn marketing scheme

[@sveinbjrnv7291]

I think that's what my local council uses... probably why they never get things done

[@Austin_allegro]

Please take it apart, i really want to see the motor and all the other components

[@Comedyshorts686]

Always love your videos been watching for years always wait for the new video I have ran out of old ones to watch lol keep up the amazing work mate also the gas can please don’t go boom I need them videos

[@Digitaldemon85]

i got a black friday deal on a 10$ angle grinder at harbor freight and used it tons of times and it is a beast of a grinder granted not wireless but still

[@MOHAWKris8]

Come on Peeps! Let’s Get Tyler a Gold Play button! This Year !!!!!

[@m.cigledy6769]

Powerful enough to be dangerous, but not enough to be useful.

[@beerbarn21]

Hell my wife’s electric pencil sharpener has more power than that thing!!

[@leevons_home_vids]

Tyler: "I just realized I'm a complete idiot" Me: "oh we knew that years ago, but glad you're becoming self aware now" haha

[@bonnsin720]

go to Harbor, freight and get you a 10 dollar warrior grinder that is corded. I worked there for 2 years, I sold 10 or so. Lol

[@JGsgarage_unboxings]

I have one of those. Held up so far, doesn't sound healthy but works well.

[@robbobsjobs8456]

I really want to see somebody hold a powerful magnet next to the Sparks from a grinder to see if it affects all the sparks.

[@deadly_dave]

Oh interesting. I would also like to see this, esp in slow mo.

[@EdHadder]

Great Video Tyler 👍🏻

[@TheFeltmeister]

Keep up the good work Tyler been here since the flex seal video

[@swoopulater]

well tyler, you know the old saying "you get what you pay for" ;o) thanks for the entertainment though, was fun to watch.

[@GuyWithASolderingIron]

The Milwaukee battery is 18v nominal and the cheapo is 20v fully charged, so its just to make you feel more volts more power.

[@tatichip]

Dad said, "Who wants a Slushie?????" I say, "Yes, a Blue one!!!" 23 years later, all I got was an angle grinder (review.)

[@raymyers6016]

Gold star for wearing your safety glasses-finally!😂 Don't keep us hanging about your dad. We caught that last comment.

[@kennethwilbur4225]

My new favorite feature of your videos is reading people losing their minds over the intro 😂 - keep up the good fight Tyler 🤘

[@jayjonah2762]

whoa whoa whoa... Tyler!!! the real test here... when you took off the guard and no one was worried for your safety... should tell you exactly how much we thought it would cut... :D great video man

[@davidkronenburg3970]

Best channel on youtube

[@therantman879]

That saw blade on the grinder had me 😬😬😬

[@earl3358]

That is a 'Makita Compatible' tool. Which is the go to platform for random China knockoffs. The batteries are often the weak point (and why the low price) and are notorious for the BMS going into protection because the cells are low amp. Try a genuine Makita 5ah pack and it will likely perform much improved

[@deathangelo82]

Tyler and Project Farm collab please. Please make this happen!

[@researching-with-will]

And Tyler makes a great video again !

[@UnacceptableViews]

project farm does actual testing and knows how to use the tools he reviews. Tyler is more for comedic purposes and really shouldn't be using power tools..

[@MarekSobczak-jp5ss]

@@UnacceptableViews Totally agree, this video doesn't have anything in common with proper test review. I'm aware that battery came with this tool is very cheap and weak but seriously, he didn't even try to charge it first before use. Fully charged should have at least 20,5-20,6V and that 1V difference really matters in cheap batteries.

[@hobbychameleon1024]

I think a hacksaw might be faster if you need just one cut

[@TylerTube]

100%

[@MegaBCAD]

In Australia most pro level grinders actually have the Handle at that angel it’s a lot better for heavy grinding For me it’s the difference between a light duty one for cutting and one made for grinding

[@michaelhinkle6648]

That's like something you get in a kids tool set we used to get when I was a kid lol. I've got the Milwaukee M18 and it's a beast.

[@toolman008]

"Sounds like something is trying to break off in there" shortly after removes the guard 😅

[@JustAnotherViewer6]

This tool is the definition of let the tool do the work don't push on it let it breath 😂

[@mattwickert736]

A lot of those tools can accept a Makita battery. I wonder if that would make it any better...certainly couldn't be much worse lol. I am sure the cells in that battery are designed to run a light not a grinder.

[@booom2314]

I have a fake Makita BL Angle grinder and I love it it takes Makita batterys but I adapted it to use cheap batterys from "AX POWER".

[@DrakeDracoDragon89]

Hi Tyler I had a question for you. What's the best thing to use to sharpen knives and swords without taking too much metal and shortening the life of the blade? I saw a video saying they used the work sharp with blade grinder attachment but then read grinders take off too much metal but I didn't know if using high grit belts with light pressure would get the job done without doing that. So in your opinion what's the best way to sharpen a knife with shortening life duration?

[@alekpo2000]

i had one of these but with a cord (its a stock model from china), it said it was 750w and it died in less than a day use... the rotor just got chewed up by the coils lol the first time ive seen some like that, i dont know what was made of but it wasnt copper i tell u

[@milchpulverkakao4917]

20v and 18v batteries are the same it just depends on what standard the manufacturer uses. For example you can use dewalt 18v eu batteries on 20v us dewalt tools . And Makitas 40v battery would be the same as two 18v makita batteries. But yeah 19.4 v is a bit low for a fully charged and new battery.

[@Usef320]

was anyone else staring at the gas can when he was throwing all the sparks with the grind wheel 😂

[@Dustin_Baker]

Anyone notice Tyler cutting the wood with the blade turned the wrong way!?😂😂😂

[@markchartier5005]

I like how theres a gas tank right behind him lol

[@Digital-Dan]

Machine teaches Tyler to do what it likes.

[@markfireinthehole7003]

Have you heard of soft start? But it most likely not any good 3:07

[@bryson.evans80]

20:02 i did not expect that

[@trystandake178]

bought the lawnmower 4.0 and cut my balls 3 times no matter how carful i was i always got nicked

[@IANHANDS]

Yeah Dude.. errm you need to talk to manscape

[@SakaYeenVI]

The only use i can see for this is like a movie prop. Theres no way anybody expects real work out of this thing.

[@suzykheeshond3640]

i bought some knock off M18 batteries from Amazon, they worked for 1/4 driver, drill and 3/8 impact, wouldn't run angle grinder, 1/2 impact, leaf blower or wet/dry vac. Dropped one attached to tool and it broke into many pieces and shorted out. Ran over a M18 battery attached to my angle grinder with a semi tractor, I had to replace the angle grinder but the battery just had some scrapes and a tear in the rubber cover. Noticeable difference in the weight between the two also. Didn't do a voltage test.

[@ChaseK2415]

Just go down to the old hobo freight and get their $13 corded grinder at least you can get some work done 9:02 grinding with a gas can right there might not be the best idea

[@SonyLabbaga]

How about a video on RE-CELLING battery packs of those cheap cordless tools? The battery pack of that grinder is light because they used very poor quality 18650 cells which are very light and don't hold that much charge. Try replacing the batteries inside with high quality 18650 cells and see if that makes a difference. Just a suggestion. 😊

[@IANHANDS]

Just buy a good tool In The first place . Good cells X10 will cost you around 40.00

[@SonyLabbaga]

Just for fun. To see if it can turn a crappy tool into a half decent or even a decent one.

[@EdHadder]

I Love Tyler Tube Vids 🩵💖✌🏻✌🏻

[@WaxedMerkin]

Pull the battery apart and see whats inside of it. lots of battery packs use 18650's or similar

[@Belnick6666]

I have two weird drills at home, Alpha Tool I think one brand is, they are the worst tools I have ever used, I think top speed is 200 rpm lol

[@mnoslife5519]

This is the grinder you give to the new guy and let him think its the best one you have so he can have an easy day.

[@Floofie_boi]

I think the reason why you need to keep pulling the battery out and putting it back in when it stalls out on high is because the battery is actually turning off due to some kind of over discharge protection

[@TechHowden]

Yeah, the battery is so underpowered that the motor will instantly trip the BMS protection if it stalls.

[@yankeebisbis]

Hi Tyler...did you tried this angle grinder with a genuine or another good battery after the video?

[@Braxel_]

Makes me wonder what the problem with that anglegrinder is, is the motor underpowered or the battery pack just delivering a weak amperage? would cool to check with a proper battery to see if it even improves. but that would need a adapter or some jank rigging.

[@coolman05]

i love the fact that he finds out it has two power modes later in the video

[@scott8919]

Tyler is Project Farm if you bought it on Wish.

[@stu-j]

Battery grinders suck anyway and if you have power in a garage or workshop use a wired one!

[@bmir89]

They have their place. No, they'll never match the power of unlimited 120v supply from a wall. But for the odd quick cut or bolt or whatever they needs cutting - they're perfect. I have power all around my shop, and when I just need a grinder for 2 seconds, I grab the battery one every time.

[@nickbob2003]

When I used to work at a metal fab place I remember always hating using the battery grinders

[@stu-j]

@@bmir89 half voltage! 220v in the uk

[@zachaliles]

You know what I never have to pull the battery out of and reset it? My corded 6" DeWalt grinder. It never stalls out either. I love battery tools, my drills and even my sawzall is battery. I don't think I'll ever own a battery grinder though.

[@jethrow6670]

Why would you not test the cheap cutting disks vs the good ones instead of throwing them

[@Dominiksautowelt]

You know what would be really interesting? Seeing whether this tool can perform better with a decent battery.

[@georgeaura]

When you found out there was a high mode did you recharge the bat to full to redo the test?

[@AlexTheUkRainbowGod]

I only need on grinder and it's an app 😂all jokes aside glad you're safe.

[@XsaviXander]

I gotta get on that app. But I'm too shy to do so.

[@randomescu]

Long time ago , 15-25 years ago i bought an cheap angle grinder and a cheap drilling machine. Both works very good even now but i used them very rare, tbh. At work, for heavy industrial use they bought Hitachi and Bosch. Hitachi works better but the handle is not as good as Bosch's. Bosch is better anti vibrations.

[@IMDARKFIRE007]

Tyler is the guy who uses a leaky boat in gator infested waters but prides himself on wearing his life jacket.....dawns safety glasses, does not EVEN care he is throwing sparks in a room with a gas can🤣

[@dhall6896]

Let’s goo new video

[@FusionDeveloper]

You couldn't pay me to use that. My blood pressure would keep rising until I exploded.

[@elw38]

I have a review suggestion. The Craftsman auto hammer.! Enjoy!

[@racoonlover13]

But my dad was a single parent my entire life 😭 roasting my present dad, imma tell on you tyler!

[@KevinTodd]

Is a perfect grinder for the DIY that has never used A 4 1/2 inch grinder before potentially I have no idea how many people get hurt by a four and a half inch grinder every year it'll get the job done and not explode a disc

[@robertw5763]

Again with the gas can right behind you while shooting sparks everywhere. I'm sure that coat hanging over the gas can would stop the flames from spreading though.

[@TylerTube]

That gas can has sat there without gas in it for months

[@TheFeltmeister]

​@@TylerTube weird flex😂

[@robertw5763]

Just be careful with the potential fumes is all I'm saying.

[@jerryreeds3306]

Well at least you have a knew bread slicer

[@jameshedrick605]

The angle grinder i have got it at harbor freight close to 10 years ago for about 10 bucks or so and surprisingly it still works

[@f4deyt318]

Tyler is the cool uncle i never had.

[@DCVinson]

I would be embarrassed if this guy was my uncle.

[@zackhaas3267]

20v is the same thing as 18v. It's the same amount of cells, and the same full charge per cell. 20v is marketing hype, and is the max full charge of the battery, which is around 4.1v-4.2v per cell. 18v is the nominal voltage of the pack, which is 3.6v per cell. 18v still charges to a max voltage of 21v, or at least should.

[@bald_chicken]

There should be a consulting business sole purpose of which would be to”Tyler proofing” your product.

[@mtnman8783]

This guy has got to be the greatest troll on KZbin lol

[@attackofthehog]

I'd be super interested to see AVE tear this down and see what it's got going on under the hood.

[@stanimir4197]

likely very weak battery cells.

[@chrisgamecave]

Those glasses arent stupid. They are awesome!

[@Mr1234512]

Tyler “buts cheapest grinder on Amazon” immediately complains it’s cheap 😂

[@treghall7623]

not sure if i missed it, but how much is the price of the milwaukee?