I Bought the LOUDEST Train Horns for the Peterbilt, Full Install Video!

[@jenniferwilson954]

Yep…had to steal the camera so I could get a cameo in there 🤣🤣🤣 Love Mom 😘🥰

[@AndyMohlman]

Classic Bruce getting pissed at someone making noise while he installs train horns on the Pete 🤣

[@shayneAus]

I was thinking the same

[@RAVI-zs5ix]

@@shayneAus me too

[@johnnysouza5601]

And coming from someone who has has some when you first install them you play with them a lot for no reason at all. It was fun to hit them when someone was stopped on the tracks close to an intersection too lol. Yes I know it could have caused an accident but I was young, dumb, and it was funny.

[@marcpavlik8776]

Exactly what I was thinking.

[@h8GW]

Kinda like how the whole SUV craze got started

[@Blue-moon12]

Is it sad that I love watching you leave/return from your Napa visits! Also your deadpan look when you were interupted...priceless.

[@jakobharris2719]

4:47 Now Bruce knows what it's like when he's driving by in the TRX.

[@kevinryan3241]

Bruce you need a magnetic drill press can drill 1 inch holes through most any thickness of steel upside down if you wanted their pricey but well worth it!

[@johnnybuss5637]

Proper reversing signal.. Horns should be pointed forward if people are to move in traffic 😎

[@robertfitzgerald8243]

Good thing ur drill shavings r going into the air linez

[@realkilju]

Functional stacks next would be cool 👍

[@adriannetea4447]

They are really loud those train horns.I like them very much,thank you for the video Bruce.Take care of you!

[@CoalMiner379]

Iv got the Nathan K5LA horns on my peterbilt 359, absolutely love them, way louder than the Leslie s5tchorns i had before

[@ProudPapaw88]

Sounds badass, Bruce. Great video thanks for sharing!!

[@keepitsimple8627]

Used this for years on stainless with impact drivers no issues with galling, It's called "Tef Gel". Being made from a Teflon® base the lubricity of Tef-Gel™ also acts as an assembly lubricant and prevents galling.

[@lucasbergfors9446]

Bruce you got the kawaski loader problem sorted out yet ? We'd like to know what became after what you told us a few monrhs ago 😄

[@lucasbergfors9446]

Go away scammer or i will get the police on you

[@davidcaskey4669]

@@lucasbergfors9446 Lucas you may like Cole the Cornstar channel he is on a big farm in Iowa

[@lucasbergfors9446]

@@davidcaskey4669 i haven't seen videos from him though but they pop up sometimes i'm a tractor, car and small engine guy so i will check him out when possible, dad and i have 1981 Fiat 880 DT backhoe made by T.Syväsen Konepaja a finnish backhoe anf loader company that existed from the 60s-90s 😄

[@davidcaskey4669]

@@lucasbergfors9446 didn't know if you lived on a farm I'll get another channel for you he works on alot of the older cars and trucks i can't remember the spelling

[@davidcaskey4669]

@@lucasbergfors9446 the channel is sleeperdude. He has his kids help him alot pretty good channel

[@jordanmcfarren7226]

That brake valve you mounted would've worked better where the air lines T into both sides of the horn base, this way there's less line to be pressurized each time the horns blow. This would also help alleviate the honk-lag as the horns bleed off the air from all the lines.

[@craigcross1504]

drilled on top of the fitting, hope water dont fall from the sky or truck wash. I install the valve instead, so I have 3 working horns. city, air, and train. I have no lag. I didnt drill no holes in no valves. when it comes to real train horns you need volume, to make them loud. if you waste your money to get a chrime shop "train" horn you need pressure not volume to make them loud. pressure would be working your to the smallest possible fitting. volume is running the fatest line to the horns.

[@Jamaican_Gaming]

I can't wait for those stacks to be fully functional

[@jaysonwhite4473]

Love the sound of it sounds great!

[@keviniske7443]

I like how you go back and forth to NAPA !! That is cool !! Love the Scooter

[@BigHoss920]

Led Light LOUD Air Horns, LOVE ME SOME LOUD AIR HORNS!! you have a Windshield visor, Now it Needs Functional Stacks

[@Stereo4102]

Those horns honked in E major, but to me the loudest truck horn was a 1970s truck horn that honked in G3. It was deafening!!!!!

[@Backdrk]

Don't mind the background noise Bruce. We hear you fine with the mics

[@davida.p.9911]

These would make a cool back up alarm as well. 😄

[@randybarentine5762]

Think I’ll add those to my smart car, Awesome 🤩

[@realkilju]

Need more videos of fitting parts on the pete!

[@earlycuyler8719]

They won’t last long mounted there! All the water and grime from the road will blow right into them. Most guys either mount them behind the fuel tank or behind the sleeper on top of the frame. They face them outward not downward.

[@johnrauner2515]

Yeah, already pointed this out to him.

[@davidcaskey4669]

I was thinking about all the gravel the drives kick up those will look like they have been sand blasted

[@alexplus3]

Bruce Crew check ✔️✅ in

[@richardhoneywell7411]

Great video Bruce love the train horns.

[@johnlund3852]

Smart to install air resv. just for the horns. They take a lot of air or at least the ones I had did.

[@simonlen235]

Hi Bruce all the way from the U.K. love your videos the video with the train horns is the freaking best live loud horns I had them on my van and scared a lot of people lol great fun would love to come meet you if I ever in your neighbourhood love blue collar great truck stay safe mate looking forward to the next video peace bro👍

[@EvilDeadFan11]

I was watching this and have some sizable speakers. I was doing some other stuff at the time and didn't realize Bruce was about to pull it already. Shadow, my dog jumped out of his skin lol.

[@nathanthibodeau6549]

You should have left the factory horns hooked up also that would've sounded badass

[@davidcaskey4669]

He going to run a hose from the factory horns and he's just going to blow in it for fa tory horns

[@Unduplicatable]

19:11 hheeeyyy ssoo uhh maybe instead of drilling into the valve/coupler especially at the top where water can get in, why not just do it somewhere on the line that’s cheaper to replace?

[@toddbob55]

SINGING KEITH WHITLEY- IM OVER YOU

[@benjaminstockton3917]

Awesome horns Bruce appreciate you 👍

[@polandball7482]

Cool I’ve seen you truck place thing before I’m a local railfan in nampa idaho

[@donaldfranklinjr7087]

Awesome train horn video Brice 🤙🤙🤙🤙🤙

[@davidberryhill1123]

Bout darn time you got some train horns. Just kidding. Nice install Bruce. Good job.

[@derylsanders307]

Train horns are cool. Sound good. Can't wait for the next video

[@briangustafson6878]

I'm about to do the exact same thing. My horns are in paint as i type this. Which brake relay did you use?

[@reubenswinkels9742]

What was the point of the two airlines if you just tee into one that is the same size? Not really getting any extra flow that way. Seems like it worked well either way though.

[@craigcross1504]

true true. a waste of time unless he ran a separate tank and compressor.

[@lloydrobinson7081]

not bad sounding horns, keep the clips coming

[@rickpullins8590]

Great video Bruce

[@rickpullins8590]

Hi Bruce

[@r.a.6799]

I argue with my with my wife. All the time abt my junk draw. That draw almost saves me about %80percent of my work and it's free. 😆 Lmao

[@dreid288]

Waiting on the Headlight bulb conversion video

[@benmoen]

Bruce when a loud motorcycle passes: "dang it get out of here!" One day later *blasting train horns*

[@Travisthegamer22]

Love the videos can't wait to see the next one 🕜😂🕜😂

[@southwestiowacattlefeeding6720]

Only thing about not having the other air horns hooked up to is I don’t think the train horns are DOT ok to just have. I may be wrong but I think I would look it up at the DOT.

[@craigcross1504]

they are fine. its the decibels they put out k3 train horns aren't that loud.

[@jam-owner-ops18918]

Missing that cabover bring Blue boy home Bruce

[@progenlol]

Imagine hearing that at a grade crossing, then seeing it roll across the tracks in front of you XD

[@Damage-Case13]

Hot Damn ! ! ! I've been waiting for more Blue Collar content !

[@ProlificInvention]

The more horns of different lengths, and the higher the air pressure they can handle- the louder it is. On a related note you can find instructions on YT to make your own airhorns out of PVC pipes and common materials and they are loud as I've made them. I have two old Hadley brand semi horns (different lengths) and they're loud AF at 150psi.

[@ConvoyBebop]

The only issue with more horns is needig more air volume

[@ProlificInvention]

@@ConvoyBebop Yes, I use a pancake compressor

[@geargrind5981]

Really would like to see a roxor on the channel since you like mahindra so much

[@Tysmopars69]

Lmao The Keith Whitley song made my fckn day😅 you heard I was drinkin more than I should and I ain’t been lookin all that good lol

[@jerredwayne8401]

How you just gonna murder my favorite Keith Whitley song like that bro? 🤣🤣🤣

[@jackrichards1863]

Hey Bruce. Maybe you should have got a wholesale deal on those horns and bought a gross ? Then you could retail them through the merchandise outlet and your shop. Same with those bloody annoying LED headlight bulbs. Some of those headlights get ya feeling like throwing a hammer through the headlamp as they are approaching with the mental glare in your eyes. The reason your horns sound like a boat is the length of pipe thats pressurized after the valve. And for that reason they are more frequentlybmounted on the roof above a momentary tap connected to the thong. Good Luck.

[@SRT3921]

🤣🤣 Bruce I was dying laughing at your comment .. you should never use impact when tighten haaaaaaa

[@jbncnow]

I would have just drilled a hole for that fitting to stick through and feed the air in there too and mount them on a piece of angled iron

[@matthewpowell5278]

I’m gonna order a set when I get home from vacation.

[@paulgrae6120]

I'm gonna steal those horns. I need them

[@dodge33445]

How you been brother? How is the wife and kid? Hope evrything is good in Bruce land.

[@darrinfry2251]

Hey Bruce you getting a cb cb done buy 440 again witha rf amp?

[@matttanis5704]

That hurt my ears through my phone. Awesome 🤘🇺🇲

[@robertmatthews2776]

Great Job. GOD BLESS...

[@patbateman6729]

I need this on my Ram

[@davidanddiana7173]

Cool video man 🤙

[@joerowley3409]

Bruce what is the valve you used on the train horn?

[@Wolfhound.]

so 2 hoses from the horn into 1 of the same small size ? so its still getting less air then it wants i guess but im sure that is more then ok lol

[@sandasturner9529]

I NEED THOSE HORNS, so that I can scare some 4 wheelers into some trees.😈

[@paulrichards6033]

Like the horn setup!

[@markhenderson7717]

Been following you since day one what’s up Bruce your not putting out as many shows to watch compared to the past start giving more or you will loose this subscriber ☮️

[@travisfletcher5751]

fenders and functional stacks

[@matthewoneill7107]

Ha I found out that my stepdad had a white straight pipe Detroit peterbilt 379

[@stowaway475]

Dang right when I was gonna get off KZbin after watching semi casual and your video pops up I can't miss your videos yea come on

[@stowaway475]

I love you Bruce I can't help but watch you in action on you tubs wow that sounds gay just for your information I'm married with kids like al bundie dats rite

[@framfull]

Why did you drill in the valve 19:48, and why was that valve loose?

[@allabouttrout6831]

Keep up the good work I like your videos

[@Dominican_rudy]

Este tipo es uno de lo mejore digo el mejor love it.

[@davidcaskey4669]

I think he should have let the peterbilt dealer install them but this is funny watching. He looks like a catoon character on that scooter

[@ky.gambler5281]

Should mounted the relay valve on the air tank.

[@seanschmidt0682]

Hey what kind of scooter is that? I need to get me one, and we're about the same build, I'd like to know which brand is good for a guy our size.

[@hahahaha-dr2ge]

Need 1 inch air line to run train horns properly and Manuel pull valve all in large air flow more sound

[@edwardstephens247]

Sounds great

[@tobbe.7052]

Do you have Volvo bm tractors in US?

[@billtaylor6502]

Well I guess I shouldn't have listened to that with my headphones on 😂😂😂

[@waynekibich3753]

Those sound awesome

[@johnbingamon525]

Love it sounds great Bruce

[@Petey1378]

Bruce you should've mounted those horns on top of the truck on the other side, where they belong.

[@timtippit9915]

Don't forget batteries for blue collar

[@roberttraylor1392]

awesome video enjoyed it seen preview on instagram you have me laughing at time i like your scooter lol i need that on my vw bug 1971 lol

[@MichaelPonton]

Well hear you coming now

[@jeffrey36rich]

Good content bruce

[@jonysingh6987]

Nice bruce

[@ТатьянаПавловна-й4к]

Доброе утро Брюс! Вы отлично как всегда сделали! Прекрасный звук горна!

[@Firearms_united]

What's going on with the iron giant??!

[@harlandmcnall2579]

Pete cabover down the road if you are interested

[@decschannel1000]

Love you bruce

[@clodoaldocamargo]

Cade o blu color aquele caminhao era demais

[@lucasdobson9278]

Just sent this to my boss man he's like guy them we are going to get these on my truck

[@caleblee4856]

What’re you gonna do with the old ones? I’ve been wanting to put some on my 96 Tacoma. Mine has a whimpy horn. I’ve got to compensate for the lack of my truck being large😂

[@ProlificInvention]

There's a diy YT video on how to make semi horns with PVC pipe and some other common materials

[@caleblee4856]

@@ProlificInvention oh cool

[@MrMicronano]

Luv your channel big rig making big noise how it should be ‘Merica

[@JamesPretty]

sounds nice.