Brother, you earned a sub from me. After what started as a search of ”Pro Cosplay Deadpool suit review” and it’s spiraled into you swaying me to buy it and upgrading it once it arrives! Thank you brother!
@mas._.k_Ай бұрын
absolutely!! glad to hear it and I hope the video helped!
@snow-_-pirate21 күн бұрын
Bro I literally have the Lady Deadpool version of this costume and just dropped it off at a tailor to have it fitted because even though it's very well made, the proportions are extremely off. I appreciate you making this video so much. I'm having the tailor cut holes into the nose and mouth because that thing makes me feel like I'm going to suffocate. I love what you did by trimming the sides. The Ladypool versions little cuff on the back is not as bad, so I'm leaving that alone - but it does do weird things to the ponytail. Anyway, good stuff! Thanks again 🤙🤙
@mas._.k_21 күн бұрын
Hey!! Glad to hear it was helpful and that sounds awesome!! Their lady Deadpool looks great
@cyclopsegg4735Ай бұрын
Could use a drill instead of a dremel tool, might work
@Mistah_J_786Ай бұрын
Yes you can I used a drill. I purchased the same costume from pro cosplay
@samuelcollins2417Ай бұрын
Looks spot on - was waiting for this one thanks man
@mas._.k_Ай бұрын
Thank you!!
@Rifer0Ай бұрын
That actually does look a lot better, nice job! I actually cancelled the order of my Deadpool suit cause there's an improved version coming after Halloween and since the comic-con I want to attend is in February or even April I'm gonna wait for the new version.
@mas._.k_Ай бұрын
OH YEAH! i'm hoping ill get a chance to check that one out.
@dylankrugerthesalessleuthp5787Ай бұрын
Same here, somehow I doubt the mask will be much different to what it looks like currently. Based on the "movie quailty" lady deadpool version it primarily just better quality materials being used with some finer details on said materials, another guy I watch do a review on this suit pointed me to a a guy making replica masks, Joyydesign, that wasnt too badly priced.
@mas._.k_Ай бұрын
@dylankrugerthesalessleuthp5787 joydesign is also a reproducer who makes money off stealing hard-working people’s files. But do as you wish.
@dylankrugerthesalessleuthp5787Ай бұрын
@@mas._.k_ Oh? How do you mean?
@Rifer0Ай бұрын
@@dylankrugerthesalessleuthp5787 I only care about the new suit itself, I bought the mask from Etsy, seller name Tommysprops, quite expensive, but worth it, I think.
@BenjaminMaas-xp7xiАй бұрын
The introduction makes me want you to cosplay vecter
@mas._.k_Ай бұрын
bet
@BenjaminMaas-xp7xiАй бұрын
Ok I will be here for it
@IFYOUSEETHISURLUCKY26 күн бұрын
Yesss! We need it now
@pointmaker8833Ай бұрын
You gotta buy and review the prop golden desert eagles from Deadpool and Wolverine!!
@Just_yo.animatorАй бұрын
I wanna see a vid where he steals the moon also nice upgrade! Will try it out for my deadpool costume!
@spideyproductionzАй бұрын
If you used a dremel to clean the sharp parts, it looks better
@scoringgalaxy842 күн бұрын
do you have any ideas on how to make the neck longer??
@khronyk2455Ай бұрын
Just got the mask and shoes to the costume and might do this to my mask. Only difference is I ordered mine off AliExpress but I’m almost 100%sure it was the same manufacturer.( I barely saved money I’d just pick whatever has best shipping option if you need it for Halloween)
@Egglover47Ай бұрын
This is so cool (says as i have never got a face shell)
@cvonia374528 күн бұрын
Have you ever thought of making a vid on weathering this Deadpool suit? Cause I would totally watch that!
@mas._.k_28 күн бұрын
i’ve considered it, but i want to wait until Procosplay hits me up about their new deadpool suit before I mess with this one too much.
@Bin_LaGGin25 күн бұрын
Have you tried the clear faceshell they sell with the holes precut? Wasn't sure if it was worth buying
@watercolorhomie146Ай бұрын
Dude this just came in super handy... thank you so much was wondering how to rescue this mask I got from shein... 🎉🎉🎉🎉
@mas._.k_Ай бұрын
happy to help!
@colinmsmallАй бұрын
Nice job. For holes I would just use a drill instead of a dremel
@mas._.k_Ай бұрын
definitely. would just require a lot of sanding afterwards.
@SpideyreactstostuffКүн бұрын
Best KZbinr
@Dudepool.OfficialАй бұрын
Awesome Job, Awesome Video, thanks Bro 👊👌
@liamlohrbachАй бұрын
Dude the original mask be lookin like the raimi gg helmet
@TizzifyyАй бұрын
I really wanted to see if the jaw could be removed but it would mess the whole thing up, good vid will be doing this to form my head better
@mas._.k_Ай бұрын
i thought about making it a half shell, but decided against it because of all the leftover fabric.
@TheTheoryFilms6 күн бұрын
It’s hard to breathe in it . Did you make a hole for ventilation?
@deerhunter11trukovichАй бұрын
1:49 bro has the jawline
@colespofford820727 күн бұрын
Could I make it into a half shell
@cadaverousghoul8008Ай бұрын
Omg thank you!!! I got this same mask and I'm a small girl 😂
@mas._.k_Ай бұрын
happy to help!! us small-headed beings will rise!! 😭
@justlucas125Ай бұрын
What I did, was heat up a small, thin metal circular rod, and stick holes into the mouth area of the mask. I breathe a little bit better while wearing the mask now.
@mas._.k_Ай бұрын
perfect!
@taylorsprincz3624Ай бұрын
Pretty good video!
@mas._.k_Ай бұрын
much appreciated thank you!
@cosmictr4shtv992Ай бұрын
Wait this is crazy because me and my bro were trying to fix it LITERALLY YESTERDAY. Here’s how i did it: * I ripped the cloth from the mask because I thought it was too stretched out on the mask, but I just super glued it back on at the final touches. It’s not as good as it used to be, but it works. I would’ve done the same as you if I had just tried to work it harder. * instead of trying to cut and form the sides like you did, i completely cut them off. If you look at the black eye pieces like diamonds, i cut the mask IN LINE from the bottom of the chin UP TOWARDS the Bottom edge of the diamond, I also made a cut BETWEEN where the SIDE of the mask meets the TOP of the mask, so the angle that basically aligns with the seam on the top of the cloth, but on the plastic piece. All The area in between those two cuts is removed, with the exception of the plastic area around the eyes where it’s supposed to be glued. I also put some bandage-textured type tape and wrapped it over some jagged edges as well as smoothing the chin area that were left as angles because of my cuts. Once I cut and removed both sides, I cut some room for the top flap on the back of the mask to let it hang and also smoothed the plastics edges from those cuts. * THIS PART WAS A BIT RISKY BUT I THINK IT WAS WORTH IT. I cut the LOWER half of the CHIN straight off, then I SMOOTHED the angles from that cut, on the mask, and the cut chin piece, then I messed around with the angle and length of the chin. THIS CAN VARY AND IS A TRIAL AND ERROR PROCESS that requires patience. From here I put the mask on with the red cloth, zipped it on, then I grabbed the chin piece, put some foam on it to give my chin volume and pushback then swiped it under the cloth and on my chin and adjusted to see how my chin would look best, this usually meant trimming the chin so be careful. If I thought it looked good then I used some thick tape and formed the chin back on the mask using tape. THERE WILL BE A SEAM LINE SO WHEN USING THICK TAPE, TRY AND FILL AND STACK THE TAPE TO SMOOTH IT OUT. I got to a point where it looked the best so I put tape on both sides and it was like the chin piece was forged back on. *I superglued the eye outlines back onto the mask and let it dry and it was FINISHED.
@colinmsmallАй бұрын
@@cosmictr4shtv992 got pics or video anywhere?
@FlowingTitlesUniverse27 күн бұрын
IDK why but my mask was so tight I couldn’t get it on… my head isn’t even. That big either, I think they may have given me a small mask
@clarkconnerАй бұрын
My zipper on it got stuck and I tried everything to fix it so I had to buy a better mask
@gabrielacero8644Ай бұрын
Awesome 😎
@NiquobАй бұрын
I was gonna get this mask from ebay, whats your recommendation?
@mas._.k_Ай бұрын
I find it curious it’s on eBay, they just be selling it separate through a third party, this one from ProCosplay is great with a little modification.
@DocMcThuginsАй бұрын
I wore my suit to Macdintons and it was a hit lmfao
Anybody know a mask that would match well with the pro cosplay suit that can be purchased somewhere else? I’ll definitely try this but I’m wondering if there are ones available on the market that would match well
@mas._.k_Ай бұрын
if i find one ill definitely make a video for you guys, but you can always just get some extra fabric, and use your own faceshell! video on this soon🫶
@colinmsmallАй бұрын
@@mas._.k_ I have several shells printed out and a pattern I bought and some red fabric… but I don’t know how to sew 🤣 I need to learn
@mas._.k_Ай бұрын
@colinmsmall see if procosplay will send you an extra mask with no lenses/shell! they sent me a bunch of extra fabric since my friend plans to sew an accurate mask, but they probably could!
@colinmsmallАй бұрын
@@mas._.k_ I just emailed them and asked if it would be possible.
@ozzal13Ай бұрын
Would like to know if you are able to get the fabric. Would also be interested in making my own haha.
@jeezy5745Ай бұрын
That intro 💀
@Mj_yt_w14 күн бұрын
Can I have one?
@Mrbob-lq6okАй бұрын
Hi
@ZUO978Ай бұрын
cooll
@Heisenburg3459Ай бұрын
Definitely gonna do this to mine. Been thinking about getting a more accurate one but cant see dropping 400 on a solid mask. Pipospidey has some sick looking ones for cheap but seems sketchy
@mas._.k_Ай бұрын
@@Heisenburg3459 yeahhh be careful of third party sites, definitely give this a go before making that decision, costs next to nothing!
@Heisenburg3459Ай бұрын
@@mas._.k_ I totally bought one from him and I will let you know. He's had the shop since 2019 it says so hard to believe he'd still be around if he didn't supply
@alexbrydaАй бұрын
WHY THEY MAKE THIS SHELL SO BIG ITS 60CM😂 also mostly all DP masks im finding are 60cm my head is small its literally 52cm so this thing looks like a behemoth on me😂
@mas._.k_Ай бұрын
same!! try this out, it definitely should help!
@alexbrydaАй бұрын
@@mas._.k_ thank you ! definitely gonna give this a try! plus i love doing custom projects 😊 absolutely BANGER VIDEO BRO! 🙏🫶💯💯👑
@spideyzone1423Ай бұрын
morning
@mas._.k_Ай бұрын
Morning!
@AuggieDoggieGАй бұрын
Pin
@Mrbob-lq6okАй бұрын
Pin😊
@goji_ink6842Ай бұрын
alr unsubscribing 💀
@mas._.k_Ай бұрын
Alright pal
@PrettyLittle_PissАй бұрын
Piss off, this gave me confidence to try and fix mine.