I fixed this Model Railroad Module and now it's great!

Learning Arduino Libraries
• How to Use Arduino Lib...
ScaleTree
scaletree.com
Trains In the Valley
www.trainsinth...
Model Railway Backshop promo code NMRA10
modelrailwayba...
Penguin3Dworkshop
www.penguin3dw...
Code (GitHub)
github.com/DIY...
Schematic
github.com/DIY...
T Trak Module
klawndyke.com/...
Kato Double Crossover
factorydirecth...
SIgnals
www.ebay.com/i...
Arduino Mega
amzn.to/49yG2Ek
L298N Motor Driver
amzn.to/3uWhxl7
Dupont Wires
amzn.to/3SSKQgD
Terminals
amzn.to/3SSfM0j
Barrel plug
amzn.to/4c3VYA7
Momentary push buttons
amzn.to/3OWS4ia
Resistors
amzn.to/3IexqGC
12 volt power supply with barrel plug
amzn.to/3TcjC60
Factory Direct Hobbies for all of your Model Railroad needs
factorydirecth...?sca_ref=4342906.pSQXhFmxxc
Connect with me at [e-mail]
Support the Channel on Patreon - / diyanddigitalrailroad
Amazon Store - www.amazon.com...
Facebook - / diyanddigitalrr
Instagram - / diydigitalrailroad
TRAIN SETS
N Scale Train Set - amzn.to/33TzsbS
HO Scale Train Set - amzn.to/311N17g
O Scale Train Set - amzn.to/3lAZCGu
G Scale Train Set - amzn.to/312Cn09
Sony ZV-E10 - amzn.to/3IK9pX1
MICROPHONE
Rode Wireless Go - amzn.to/33ipqDf
Rode Smart Lav - amzn.to/3dN6ChI
LIGHTS
Aputure Amaran 100D - amzn.to/3ELlysm
Aputure Amaran MC - amzn.to/3ER8Vfw
GVM 480LS 2 Light Kit - amzn.to/3EOTTGY
MOTION CONTROL
MOZA Aircross 2 Gimbal - amzn.to/3oNb4TG
MOZA Slypod E - amzn.to/3dMWtkQ
Channel Merch - teespring.com/...
Consider donating the PCOS Challenge to help women everywhere with PCOS
pcoschallenge....
“The godly may trip seven times, but they will get up again.
But one disaster is enough to overthrow the wicked.
Don’t rejoice when your enemies fall;
don’t be happy when they stumble.
For the Lord will be displeased with you
and will turn his anger away from them.
Don’t fret because of evildoers;
don’t envy the wicked.”
Proverbs 24: 16-19 NLT

[@danbalmer1]

Nice job. I have a double and single T assembled that I need to finish before fall, and this gave a lot of good advice and ideas. Thanks!

[@skerbs7755]

Looks nice! Thanks, Jimmy, for another great video! Model railroading is fun!

[@ma8rk]

Man, I'm glad I found your channel! For many reasons, I haven't been able to begin work on a proper layout since seriously getting into the hobby several years ago. Over the years I've collected a decent amount of motive power and rolling stock, but have had to resort to temporary layouts whenever and wherever I could lay one down in order to see my trains run. As a result I've amassed a huge amount of Kato Unitrack. Now I finally have a place to lay down a legit layout. I decided that I have too much money invested in the Kato track to just let it collect dust and I'm just not really looking forward to the rigors of hand-laid track. After seeing the results of your trackwork, I 'm sure that I'll be able to create a decent looking layout using my stock of Unitrack. Thanks for the inspiration!

[@bartbrinkman]

I saw some code coming by. Looks like you have extensive blocks of if-then statements, it might be more useful to create a mapping (an array or even a bitmask might work very well here) of sorts between conditions and state. This usually reduces the amount of code needed and might also be easier to read (and/or debug).

[@Marc_Miller]

Could you recommend a link or video to learn more about this concept? This sounds useful.

[@donh8833]

​@@Marc_Miller LightCondition = LightConditionTable[CurrentState]. CurrentState is a bitmask. ie: Switch1Reverse&Track1Clear (Values 1, 4 so it goes to index 5 (6th element)) enum Crossoverstate { Switch1Reverse = 1, Switch2Reverse = 2, Track1Clear = 4, Track2Clear = 8}

[@Marc_Miller]

@@donh8833 Thank you Don

[@ethanandrews1230]

Nice, Jimmy! Looks great!

[@loispadgett6306]

That looked great Jimmy. I like how you put them to gether and then blended it to look unifed. Thanks for sharing. GOD BLESS 🚂💖🚂💖🚂💖🚂💖

[@robertakerman1686]

Looking great Jimmy. That tip on chalks for Unitrack I’ll be using .

[@bartholomewsorrentino9013]

Good video. Love your enthusiasm!

[@dff19707]

The next time you separate the modules, consider painting that exposed Sculptamold with your brown base scenery, to guarantee that the white won’t show through at any viewing angle.

[@ArgentumCoyotl]

Alternatively, if your budget allows, mix paint into the plaster batches so that even if it chips its already an earthen color throughout

[@petermenningen338]

Aloha Jimmy, I take it that you place an arduino on each module and just run a seperate DC power buss between the modules to run electronics and lights. During the module construction could you show a picture on how you handle the connections between the modules.

[@billschneck9107]

Good looking module! Can't wait to see the completed Phase 1! Folgers breakfast blend ☕️

[@thetrainloverdk]

2 Questuins for you jimmy 1: Will you be giving more updates on youre new layout? 2: Will you be using Old modules that you have used in other videos?

[@DIYDigitalRailroad]

Hello! Yes I will be doing updates. The next module will be a big chunk of phase 1 and I will be doing the update then. I have 3 more major module projects before phase 1 is done. As for the old modules. I actually stripped them for parts because they did not match.

[@thetrainloverdk]

Ok thanks for the answer!

[@OldcampRanch]

Well done 👍🏻

[@KevinSquire]

Hi Jimmy - - great job, and as a T-TRAK modeler, I am enjoying the new focus to a T-TRAK layout :-) --- One thing I want to share- From my experience, having a double (or single) cross over module RIGHT next to the corner module can lead to some cars/locos derailing on the entrance to the turnout (a good example is exactly how you had it pictured at the 7:00 mark) .... When my group puts together layouts now, we always put something in between a corner module and a crossover module (Be it a full module, or even just a 62mm double track piece.. I know your looking at building this has a home layout, so you could always just make a par of "non-standard length" modules to address this if you don't want to mess with the overall layout design too much)

[@brianpugh2656]

What happens when the cross over is in the middle of a double module?

[@KevinSquire]

@@brianpugh2656 ... I assume that would be fine since you then have a built-in straight on either side. (The key is just to have a straight section of track before getting to the turnouts.)

[@EvergreenValleyModelRailRoad]

Jimmy have you considered making a Github for all your code and projects?

[@DIYDigitalRailroad]

I actually have a GitHub account and page! I just need to organize it better haha!

[@donh8833]

Usually, when you have a double crossover like that, they all throw at once (reverse) or all go straight (normal) Shouldn't pattern me Green Green for normal? And Red Red for reverse (crossover). That's my understanding. But I maybe wrong from reading my signalling handbook. I gotta say though, that's really a good looking scene section.

[@Mike__B]

"... did not do it to make it prototypical... " and me going "But it worked right? Why does it matter?" then I remember how close to real... sorry "prototypical" some people get with this hobby.

[@jdlcdn]

N scale layout?

[@DIYDigitalRailroad]

Yes!

[@TheNorthwestWind]

[@anthonyborden2513]

Look great 👍 qa Jimmy would you 🤔 think 🤔 about making a business 🤔 of do computer work and software other people layout as a contractor business