I Turn One Cylinder Engine Into Radial Engine and Turn Into Gokart

[@MultiKelly85]

One of the best go kart builds I have seen on KZbin. He not only built the motor from scratch, he built the frame too. Made it ALL look good and ran. Nice!

[@yugaprananda7398]

Òm7f

[@BIGSMOKE-bl2lq]

Steering pivots are to far from the wheels and has no Akerman angle wont steer for shit hence we didn't see him turn it and those bearings holding that pinon gear wont last 5 mins with a side load so mad props on the engine the gokart not so much

[@fieromaury]

@@BIGSMOKE-bl2lqif you think you could better do it, we’ll wait your results

[@SgtAwesome97]

@@fieromaury What an asinine comment. Not everyone has the money nor ability to do so. That does not change the fact that what he says is completely true. Does him not having the ability do this, make his knowledge void? No, it does not.

[@fieromaury]

Yeah, you right

[@djo_man]

Your Thread-cutting skill is immaculate. brilliant work!

[@jplxlabelle1681]

I couldn't be more impressed if you made an airliner out of popsicle sticks. I can't believe I watched you weld and cut the block for this! Amazing engineering isn't saying enough.

[@kevinsellsit5584]

You are a class act young man! You either have a great teacher or did your homework very thoroughly. I also like your use of recycled parts. Oh, the three tier F1 style wing is an A++

[@kwgaming6175]

Best go-kart build I have ever seen! He built the engine, frame, and just about everything, and its a monster!

[@goldblueberries326]

A total engineering feat with precision... great job... simply amazing

[@garypeterson9083]

Really nice build you have there. You are very talented. You should be aware that welding or using a cutting torch on galvanized steel produces toxic gasses. It's not a good material for fabricating. Stay healthy my friend.

[@nelqui7685]

I've seen several go karts being built on KZbin but this is one of the best with the best finish congratulations 👌👏

[@heneralwakin1277]

Can you make 8v engine using motorcycle parts and put in a car without engine.

[@DatBlueHusky]

cars in vietnam are almost impossible to afford, they cost almost $100k for a base model corolla

[@crowleylyrics]

@@DatBlueHusky He make the car

[@trekintosh]

Old car

[@leemilica]

8v like 8 valve?

[@trekintosh]

@@leemilica I think they meant V8

[@SlenderRogerOficial]

El eje este completamemte unido terrible en curvas esperaba que hicieras un diferencial elaborado como suelen ser tus vídeos, aunque, quien soy yo para juzgar siendo tu un gran inventor, buen video

[@ХОББИ_Олега]

Это двигатель не развил и половины своего потенциала на этом го карте. Для этого надо, хотя бы, мощное сцепление и коробка передач. А так вообще молодец 👍

[@ChrisCraigie-oi1un]

Outstanding metal working skills! You did a great job. Thanks for showing us how you did it.

[@marcchaffee7751]

O.k. I made gokarts all my life , but to build your own engine ? Im fucking impressed . Give this kid a raise !

[@StephenDanielAddeo]

Kind of surprised he stick welded all of this. Last minute switch to ring and pinion gear makes me wonder how the initial test went. Awesome job.

[@ronaldgreen5292]

Your engineering skills are "off the rails!" 😳🤯 It looks like you just "mocked up", that frame design, like you built go-kart frames before! Excellent design and work!!

[@oldschoolmotorsickle]

The centrifugal clutch is not designed to transmit the amount of torque produced by the engine. It will fail rapidly. The build itself is very creative though!

[@spenny3403]

Freaking badass! Amazing skills man I'm telling you to be able to create a radial engine like that that's wild! I think you should try to build a bigger one with like 6 cylinders haha! You need to make something that has a transmission so you can get some real speed going. Can't wait to see what you do next!

[@Shagnasty]

Great build. Really enjoyed the way it turned out. Looking forward to your next build. Thanks for sharing.

[@KrustyKlown]

I build racing karts ... awesome job for just winging it!! ... but do not use set screws on steering shaft arm, or on clutch drive adapter.... they will SLIP ... weld, Pin or cut keyways to be safe.

[@selmirikanovic]

Another serious design flaw.

[@karlnielsen5759]

This kart sounds so good. I love the sound radial aircraft engines make and to have that on a go kart is awesome!

[@kipohara5992]

Always enjoy your videos, but be careful when welding galvanized metals (frame here).....it gives off a poisonous gas that can make you very sick.

[@abyssmanur3965]

With this guys skill level he would know that.😊

[@SekAustria]

Bangis bro, ganda ng diskarte sa clutch!

[@markysspotlight2472]

Absolutely amazing, everything you make is impeccable and so quality!

[@erikbraguim4288]

Irmão que incrível trabalho , simplesmente divino , gostei e disso que estou falando fazer a preparação do motor até a construção do kart , fantástico, parabéns!!!

[@Flies2FLL]

Awesome! Looks like Panama in the background.

[@goodmanboattransport3441]

Nice work, I wish I had access to the tools you have when I was young. I see one potential problem with the set screws on the steering shaft, one of those should go through the shaft, at least part way in case they work loose, you will still have steering control 😉

[@martin-vv9lf]

I was thinking the same thing, not safe at speed, but put a nut and bolt the whole way through, no issue. grub screws are only good enough to fix a bearing to a shaft.

[@kimurajustice]

Truly the most creative channel on KZbin 😉🫵👏👏👏👏👏

[@kerrypierre9494]

You have an amazing skill set bro. Thanks for posting your builds, love the channel.👍🇺🇸🤘🔥🔥🔥

[@a-big-idiot]

Why the american flag bro?

[@kerrypierre9494]

@@a-big-idiot I'm American

[@Kev-N42000]

Work of art, I like the cooling fan, Wish it had the 3speed semi auto trans rigged to it tho

[@ralger]

Great fabrication skills , well done . 😊

[@carbonconnection2480]

*If this guy had the funds or lived in a country that had high tech equipment and tools, he would be dangerous!... good job my man! Damn good job!.*

[@SinsBird]

What is this 'high tech equipment' that you're talking about?

[@michac3796]

@@SinsBird Maybe he's talking about a technical university or plain cnc machinery.

[@carbonconnection2480]

@@SinsBird. "CNC Machine" along with tons of other higher tech tools than he is using...

[@tunk_2ton168]

@@SinsBird perhaps he means a particle accelelrator or a ray gun or perhaps even a machine

[@kasuraga]

@@carbonconnection2480 oh man, the things this dude could do with CAD and a 5 axis machine.

[@fastlosiccdl4600]

Not for nothing the way you made those threads was top notch 👌

[@Jordan_0121]

You my friend, are seriously talented. Absolute pleasure to watch your videos. Definately got me WELDED to my seat everytime. Keep up the good work! Your projects are true works of art. 🛠🔥🏆

[@wz8729]

Nice job all around, one suggestion, relocate the exhaust pipe so its not pointing into your back. Don't want to get burned.

[@timwegman5776]

Wow man your skills never cease to amaze me. Love the channel keep it up.

[@geo2cv6tron14]

Really really impressive and really really cool 🤩👍

[@lindseyshoptv8384]

WOW this is my dream to have a go cart in my house .. nice work sir .. i love your video's

[@fohkukohgeki]

really dope. not having a shroud on that fan is asking for trouble though lol

[@ur_quainmaster7901]

Not that it really matters for a go cart, I'm sure he's making plenty of power.... but those fans use way more power than is necessary to cool the engine. Then again, I didn't see any 12v charging to run cooling fans or an oil cooler or something. it definitely saves on weight and has a simplicity advantage. Does need a shroud.

[@ScarlettStunningSpace]

I love the addition of the rear fan

[@kasuraga]

Man that's so cool. It sounds wild.

[@kidsalex13]

i made a go cart with a single one of those 125cc engines, kept the 4 speed transmission though, that thing actually went about 45 mph, it was so much fun!

[@graemediesel2936]

Thats a pretty sweet little go cart.

[@mohamednibras4282]

Congrats bro🎉 Go win the world man...

[@darylSKYTZOwillis]

You are an excellent craftsman 👍🏼

[@maxotoki]

my God, it looks very reliable and repairable, I hope it is, although a lot of cooling is required for high power

[@JoeCamel-eb1nm]

Anyways you are a very Smart intelligent person no matter your age and you are extremely gifted

[@trinipattan1472]

That is the coolest go-kart in existence

[@crudboy12]

Just an FYI for future reference: You should use a grinder to remove the zinc coating on the frame tubes before welding. The fumes are very poisonous. Very cool build!

[@jerryballard5523]

Sweet ride man!!

[@J_SteamWorks]

Now... add a gearbox to the kart

[@minibikeaction4266]

Dude knows his stuff

[@blikje_in_de_water]

you should allow people to support you:) I think a lot of people will want to do that:)

[@Lucas_sGarage]

extremely cool man, i don't understand why it has so low views

[@GYULX294]

and the F1 style front wing hahaha 😂😂😂, I love that detail some much

[@cptrikester2671]

Never fails to impress. 👍😀👍

[@toktomikanikal]

This car runs in straight lines, as it did not take into account the design of the Solitaire, but it is good

[@robert-to7ev]

Wow man you are smoking it on the number of subscribers. Nice work!

[@toddburgess5056]

That kart is absolutely badass. I would love to spend an afternoon blasting around on that thing! It would be fun to see how far it would travel with a couple attached fuel tanks. Maybe make a multi-part video where you drive it across the country or something. 😀 🏎️💨💨💨💨💨💨

[@stevetag2081]

Let me have it ill drive it across the country

[@winarasangaming182]

Advance congrats for 1m bro 💝

[@ErickCarmen-g9y]

wow nice sana makita ko to sa cwc..

[@christophersherratt7299]

A work of Art 🎨

[@jeffreyariaso1432]

Over all.. astig! goodluck s mga susunod png builds Brother....!

[@amyasseektruth8246]

Absolutely AMAZING!!!

[@DM-wp9vq]

Somebody please send this man a pipe bender! Preferably hydraulic for his sake, but a manual bender would fit the channel well.

[@pokwa906]

Thanks. Really good video and craftmanship...

[@michaelstarr5861]

Pure Genius.

[@hunterbroskee6184]

At least this guy is whereing a hood cool project man

[@sasquatchtv4157]

Probably engineered that pipe bender himself.

[@speedybikelife7475]

He did. And yes he got a vid off that too

[@francobarra2718]

Sa cwc Yan ahh nice nice❤

[@brostermcgee9989]

If this guy just had a bit more funding and tools I’m sure he could do crazy and fantastically wonderful things

[@joegreene6250]

He has nearly 1 million subscribers, so he's funded quite well already.

[@Earth11111]

This dudes a true engineer

[@parker73711]

pretty darn cool...probably only thing which will eventually cause u issues is the rear drive...running those open and dry will im betting cause problems...but like i said cool project!!

[@goodmanboattransport3441]

Ya, same thought, I guess some sticky chain lube might help with the wear, or he'll just fab up something new should a problem arise

[@TRDKhanbrothers]

Awesome man and love the footage taken on how we replicate one these go carts 😎

[@blessedwithpatty3568]

Broooo! Love the new style of content!

[@DOCTRJ]

Awesome man 🤠😎🏁

[@peppende]

You are phenomenal! 😍

[@merijnleenaerts7107]

Great video again you could try to boost this engine to make it faster for example put 3 carbs and a bigger exhaust system

[@tonysargent1699]

Nice one! Great to see you back and in such fine fettle!

[@MichaelSteeves]

Next modification: A heat shield so that your neck doesn't get cooked while riding! Make it look like a roll bar just because.

[@dvspot]

And a shield over the cooling fan.

[@alexandertopale4456]

Congratulation!!!

[@axeus1382]

Можно попробовать сделать такой двигатель - на 6цилиндров или на 5 отлить блок из алюминия и построить вертолёт👍

[@Mechanico2017]

Nice bro!!! Next bro make a 2 stroke diesel or wankell engine!! I want to see that

[@physicsguybrian]

Welding galvanized pipe causes hazardous fumes. Very harmful. I hope you wore a proper filter mask good Sir! Excellent build!

[@Travelbeatcreations.official]

You have 1 carb for 3 intakes, and this is why performance is poor and you have sound from only 1 cylinder and not the cool 3 cylinder sound, air is restricted. I don't have access to the tools or the parts that you have, but I'm planning to make something similar and have it sound like something that can wake up the dead, but you still did very good👍

[@flydaddy55]

Very nice work...

[@elissandrooliveiralimalima3088]

Ficou muito bom parabéns 🔥👍🏽

[@noanyobiseniss7462]

You sure that fans working correctly? Nice work.

[@john-boywalton2954]

Nice🙂aber hat der Bastler schon mal etwas von Unterlegscheiben oder Federringen gehört oder steht er drauf,wenn ständig Teile abvibrieren?Mal ganz davon abgesehen,wie schön ne Schraube ohne Unterlegscheibe den frischen Lack aufreißt und abpellt und nach kurzer Zeit es dann rostet um die Schrauben drumherum....

[@Grego525]

Hey! You remembered the angle of the knuckle, wow, but you probably forgot about the steering trapezoid. Anyway, thumbs up and keep watching!

[@Thongjaychannel]

Very nice 👍

[@_.-art-._]

3:25-подшипники перегреются и размягчатся

[@RalphIvanDelaTonga]

The transfer or power to the wheels reminds me how Tamiya drivetrain works.

[@justinmacdonald6079]

Please as one of your subscribers even if it doesn't work, it's been a dream to see someone try a 1:1 ratio engine to a wheel especially for a go-kart. Since this is such a powerful engine, could you make a video of attempting a 1:1 ratio??

[@kinotransam]

Awsome work!!!

[@agungriski5224]

cool project....make me want to try my self

[@tesicnr]

For the next project take a 4 stroke 6 in line and make it 2 strokes!

[@TeamDriftEVO]

Pretty cool man - BUT.. those fumes from the galvanised steel pipes you are welding on are very dangerous. Lucky to be alive kinda .

[@MrKeithsplace]

Dam, put a little rack and pinion steering and some strut suspension on that and you could start a car company.

[@Jauertussen1]

nice work with motor and the cart. but the drive chain to the rear axel is an issue, eather make the force apply to one wheel or use a differencal. handling doing turning can only happen by forcing slip of one wheel, making it hard to turn.or eating the rubber.

[@ronaldgreen5292]

Unbelievable!😳 I thought he was going to paint it with a professional paint gun 🔫, instead he used regular spray cans for the primer and paint!

[@Estenio1604]

Ficou incrível. Parabéns.