K1600 Fuel Pump Removal and Install

[@yamanturan2707]

Thank you for the great information......

[@danamorgan8540]

Thanks I needed a little bit of help in replacing the gas outlet from the tank as it was cracked. The video gave a good picture of it. I use to live in Algonquin behind Meijers by the water tower.

[@kirksmotorrad]

you can always bring it to me!

[@shamoy1000]

With out your help I would have had to pay a fortune to maintain my K1200LT. Thanks

[@zycoBR]

Me to i live in brazil

[@kevinkelley1447]

Thanks for making and sharing this video.

[@zycoBR]

I learned a lot from Mr. kirk

[@donhickel3233]

Great video, If you had to replace the pump what pump would you have used? BMW doesn't just sell the pump. Thanks for the tips on re-assembly.

[@kirksmotorrad]

most likely one like this. I would have reused the filter sock. amzn.to/42hWdS2

[@Riverfurm]

Hope you removed that K&N air filter and replaced it. There is a reason why they flow more air. And get rid of those plastic quick disconnects. Replace them with them Stainless steel couplers. They will fail. Reply

[@kirksmotorrad]

I did. I dont like KN filters either!

[@waynehuntley7556]

Hello! Just wanted to say great video! I have a 2018 K1600B. Took it for a ride yesterday and must have put bad fuel in it at a gas station in the middle of nowhere. Running really bad but seemed to clear up enough to get home. 1. I'm wondering if you can tell me why you thought you needed to replace the fuel pump? Did the bike not run or start? I have several fuel pump related error codes in Motoscan now (3A1530 and 3A1062). 2. How did you test the pump to see it was bad once you removed it? You say it was repaired. Did it just have some dirt in it? 3. Lastly, just want to say thank you for making the video! It gives me confidence that I might be able to replace my fuel pump if I end up needing to.

[@salahshami8793]

Great job and great useful information . My dear I have problems with my bike K1600 the reverse not working could you please guide me how to fix this problem My best greeting

[@kirksmotorrad]

You need to get it on a computer to see what the issue is

[@AllTHINGSTRAMS]

Hi do you have a video on how to replace the starter motor on a bmw k1600gtl? Thanks

[@LTVoyager]

What was wrong with the pump that was repairable?

[@kirksmotorrad]

It just needed a little encouragement to clear out some crap that caused it to be stuck. It started right up again when I applied voltage to it and is running great.

[@BMWLDRider]

Don't you want to disconnect the battery? Or did I miss something?

[@kirksmotorrad]

You certainly can but very little chance of an issue with this one.

[@gguezille]

Is there any reason you did not replace the plastic quick disconnect while you were there, as they are known to fail?

[@kirksmotorrad]

I am not sure I didnt change it. The customer may have declined it too. The next time I have one in for that service, I will make a video on it. Thanks!

[@rossfelton1955]

Thanks

[@vfire2466]

Is there another fuel filter?Or is it just the one on the pump?

[@kirksmotorrad]

Just the one on the pump.

[@LTVoyager]

Bolts fasten unthreaded parts, with the help of a nut. Screws fasten parts that have their own threads. So, those are screws. 🙂

[@kirksmotorrad]

I have my grandfather's curse of getting the wrong names for things.. If he wanted to talk to me he would go through about 6 other names first before hitting on mine!

[@jeremyprince4945]

Hi Do you know if a fule pump for 2013 would work for the 2018?

[@kirksmotorrad]

it should be the same

[@phensriwood2093]

Set screws!

[@jubiletabustamanteserrano2446]

siempre interesante

[@dikketwigt]

Ausgezeichnet!

[@bogusm8940]

Glasses Kirk? Glasses? Looking like a dude now!

[@kirksmotorrad]

I am not getting younger...

[@FJRDN01]

Thanks