Infinity G35 - Nissan 350Z knock Sensor/ Cam Sensor Replacement - Code P0340, P0328 & P0327

If you would like to leave a donation here is a link ...
www.paypal.com... Today I'm replacing knock sensor on my 2003 G35 along with the Cam sensor on it while I'm there.
Here is a link for the Knock sensor Hardness
amzn.to/2te9U5S
Knock Sensor
amzn.to/2JSxj3E
Intake Gaskets
amzn.to/2JXuFJW
Cam Sensor for Passanger side
amzn.to/2tgjc0X
If you want to help out the channel with out spending any money and you are a Amazon shopper just my affiliate link to help out the channel!
amzn.to/2IMc0k5
IF YOU HAVE ANY QUESTIONS JUST ASK!
If you would like to leave a donation here is a link ...
www.paypal.com...
** If the video was helpful, remember to give it a "thumbs up" and subscribe. **
Follow me on INSTAGRAM
/ falcons_garage
Twitter.
/ falcons_shop
Garage's Facebook
/ falcons-performance-an...
Facebooks Hobbies
/ falconshobbies
My Gaming Channel.
/ @falconsgaming
Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage

[@Emeka383]

The more in depth videos I see on the VQ35 the more I hate it.

[@seasgarage]

Ha, bro stay clear of this car! Im at 200k and havnt had any major issues, but stuff like ball joints, gasket leaks, oil cooler etc, needs replaced. Pretty much everything that is in the most difficult places and hardest to fix.

[@kirkgill3237]

That music "CAME IN LIKE A WRECKING BALLLLLLLL!!!"

[@poseidon4979]

Does anyone know if theres a specific torque when putting everything back

[@gonrb3370]

Señor Falcon thanks for this video , i have changed the both crank shaft position sensors and Iam still getting a P0335 code and it is hard to start.can you give me some direction( I have erased the codes already ) I also appreciate that u dont use foul language, thanks

[@FalconsGarage]

did you use dealer sensors? also check the hardness

[@markcarr5142]

Nissan has A TSB for the code 335. It says to replace both camshaft sensors and crankshaft sensor. I've done this many times on nissan/Infinity vehicles. And always use dealership parts. Aftermarket has almost never worked for me, or if they did, they only worked for a few weeks, and then I had to do it again

[@epicspawnzz2529]

When these two codes come on does the engine make like a knock in the engine

[@FalconsGarage]

sometimes .. but it could also NOT be related

[@tombrown3445]

Great video thank you

[@FalconsGarage]

Glad you enjoyed it

[@r2ba435]

Do you ever have any bmw or Mercedes coming in the shop? And do you find newer cars harder to work on in terms of electronics?

[@seasgarage]

I find anything 2002 and up are harder. Especially the 2017 and up germans. I wont even touch porsches from 16 and up, and they're my specialty.

[@samptak3457]

I’m starting a stream right now

[@RAF.PHAEL.]

Hey, do you know what’s the other cable that connects to the knock sensor harness? I accidentally broke the cable that connects to the plenum. Please need help asap!

[@FalconsGarage]

could you send me a pic to instagram or tweet it to me so I can try to help

[@seasgarage]

Ever figure it out?

[@sparkles-s14]

What were symptoms of the bad knock sensor

[@FalconsGarage]

Check engine light on.

[@rolltide9547]

Power Seats stop working then water leaks.

[@leonardshepherd4284]

@@rolltide9547 bruh what😂😂😂😂

[@Johnson2985]

I need to replace a knock sensor on a 2003 G35 and there seems to be two different part numbers, one is KNE20 and the other is KNE08, which one do I need?

[@FalconsGarage]

It depends on what knock sensor you need. I believe your car has 2 sensors.

[@Johnson2985]

Its throwing a P0328 code

[@FalconsGarage]

I believe that’s bank one. I don’t know exactly what part number that one is. But any auto parts place or the dealer would be able to tell you the part number for the banks 1 knock sensor

[@lawrencesalanga8470]

I threw the code and as soon as i changed it the other one went bad. I would get all three sensors

[@lizyop2943]

Falcon's Garage I’m having the same problem here.may I please know the parts no of the knock sensor you used this harness? Or can you please tell me manufacturing date of your car? Thank you

[@JohnsonSX21]

Hey man, I am running low on funds to fix my dang car. I would really like to replace that harness, can you tell me where you ordered your knock sensor harness from?? Autozone and Oreilly's wants $100 for it, if there is a cheaper way please let me know. 04 Infinity G35. All this research is hurting my brain lol

[@FalconsGarage]

TBH .. i wound t go with a cheap product .. because its a pain to get to and it will be more in labor replacing it 2x ... when it comes to hardness I always buy from dealer or something like that

[@gstacks510]

Go on Ebay. Aftermarket parts are usually always good. Don't believe the hype of OEM parts. It's the same stuff they use to make them. Sometimes slight variation but if it fits and works why bother paying more.

[@mazemaz4169]

Please tell me where is this code p0328 infinity fx35/2006

[@shayrose7040]

Can these two codes cause car to stall? My check engine light has never come on then all of sudden my battery died out (interstate battery lasted for 10 years!!) so I got anew one now the car stars fine but my service engine soon light came on so I had them tested and these codes came back I just want to know these codes can cause the engine to not start

[@FalconsGarage]

Yes. This codes could cause a stall or a no start situation.

[@shayrose7040]

Thank you

[@Retch66]

@@FalconsGarage I have a 350z 2004, and i have this knocksensor code. And at idle it shut off by itself after awhile of driving. Then it stalled. After I install the new knock sensor, will this problem be taken care of?

[@SergeyPip]

Infinity? What??

[@joesanchez1176]

Hola yo cambie y me lo sigue marcando el scaner por que?

[@FalconsGarage]

borraste el codigo? puede qu tengas otro problema tambien

[@joesanchez1176]

Lo tengo que borrar?

[@FalconsGarage]

Si. Despues de cambiar la parte de tiene que borrar el codigo

[@joesanchez1176]

Oo ok lo are grasias Falcons me boy a suscribir 👍👍

[@joesanchez1176]

Sigue apareciendome el code del knoksensor Fslcons se prende la luz😑

[@shayrose7040]

I’m curious to how much you charged for this because it seems like a lot of labor geez

[@seasgarage]

Its not a lot of labor, its just knowing how to do it. I can do it in about 2 hours now. After the 4 days it took me the first time lol. Id charge about 150 plus parts. Stealership will probably be around 500.

[@tombrown3445]

Infiniti wants $1500 to replace the knock censor . I think im going to attempt it myself.

[@jonathna11]

I changed the knock sensor yesterday and today the light keeps coming on can someone help me please? I spent hella time yesterday to do this whole process

[@FalconsGarage]

you mentioned the light came back on .. was it the same code? what was the original code? did you use dealer parts? did you torque the knock sensors to specs?

[@jonathna11]

@@FalconsGarage it was the same code. I tightened it pretty good with my hand. Lol people torque stuff like that to spec? Yes it was the same code. Something with knock sensor 1 or single sensor. My car only has 1 so

[@staydown4bo]

@@jonathna11 yes, it needs to be torqued to spec and every bolt should be labeled because they all have different lengths

[@يوسفالنصيري-ع6ح]

Hello friend.. How are you ?? Can you give me some infos pls ?

[@FalconsGarage]

ill help as much as I can

[@يوسفالنصيري-ع6ح]

@@FalconsGarage thank you friend I have a G35S 2008..6 speed manual.rwd . Motorchaden.. I want know if the VQ25 of G25 Rwd can be installed and work normally in my car with the manual gearbox .. The princip reason is MPG...

[@FalconsGarage]

I’m not familiar with the transmissions. But for questions like this I always call my local junk yards and they can usually give me the info. But even if it “bolts on” I’m sure you will need to do some hardness adaptations and computer reflashing.

[@يوسفالنصيري-ع6ح]

@@FalconsGarage thank ypu very much .. I intend to buy a engine from ebay.. If this method will be workin perfectly..i will buy a VQ25 from you.. Im from morocco.. I have a cousin in NY can do all with you.. Thank you

[@seasgarage]

@@يوسفالنصيري-ع6ح how did it work out for you? I would not think it would work.

[@josefidel3490]

Si lo ases en español será mejor

[@FalconsGarage]

si quieres videos en espanol sigue mi canal de espanol

[@mazemaz4169]

Please tell me where is this code p0328 initially 2006 fx35

[@FalconsGarage]

what do you mean were the code is?