NISSAN INFINITI G37 CRANKS BUT WON'T START DIAGNOSIS

In today's video we take a look at a 2013 infiniti G37 with a V6 3.7l engine. The customers complaint is that the vehicle shut off while driving. Now the motor will crank but it does not start and run. From the sound of the way the engine cranks, it seems we may have a timing chain problem, but we have to run some diagnostic tests to be sure.
!!!Please don't forget to "LIKE" the video & "SUBSCRIBE" to the channel!!!
**********************************************************************
LOW AMP PROBE
Check it out here! amzn.to/2TXVckZ
**********************************************************************
THINKDIAG by THINKCAR
Can be purchased here! amzn.to/3fpfYSn
*Use coupon code 48PEKHFA for 30% off during checkout! Offer expires August 30th, 2021
*For technical support questions click here! / kingbolen.fans
*****************************************************************************
If this video helped you in any way and you would like to donate. Please
Click the link to Donate! paypal.me/advancedlevelauto
Thank you so much for your support!
***********************************************************************
Visit our Amazon store here www.amazon.com/shop/advancedl...
to shop for our channels recommended tools and gadgets!
************************************************************************
If you enjoyed this music then checkout Epidemic Sound here!www.epidemicsound.com/referra...
*************************************************************************
*You can email your questions and concerns to [e-mail]
Disclaimer:
Due to factors beyond the control of Advanced Level Auto, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Auto recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Auto, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Auto.

[@JS-ri2rx]

I honestly love how you make reading tech drawings from timing to wiring simple. Much appreciated and I am learning lots. Defo going to keep watching. Best teacher so far found. Awsome mechanic thank you

[@MrBuddysAdventures]

I've said it before. This is my favorite repair channel, why? Eric's a down to earth dude, quick and to the point videos, I don't have to watch at 1.5x speed like some others just to get to the point and I still usually learn a thing or two.

[@ADVANCEDLEVELAUTO]

Thank you for the support!

[@Hotecce1]

If you like Advanced videos, then you will love South Main Autos channel as well.

[@cocainecowboy1717]

South Main Auto is much better.

[@algeriathelandofterrorists3329]

@@cocainecowboy1717 I like scanner danner more ... he's more about education

[@valentingeorgiev5001]

Great diagnostics, Eric! I'm an electronic engineer for almost 30 years - your approach is very systematic, logical and scientific. You have a great understanding of the mechanical, electrical and software operation of cars and go right to the most time saving diagnostic method. If you ever get tired of wrenching, you would be a great teacher at a tech college. Any college should be happy to have you teaching the art of auto diag and repair. Thank you for sharing your knowledge with the world!

[@terra1568]

Complete Diagnostic without touching the Engine. Thats fantastic. Greetings from Germany.

[@ADVANCEDLEVELAUTO]

Greetings!

[@terrencewilliams2813]

I love it.

[@PistonShack]

Not all mobile mechanics are equal skill and experience! Well done Eric. Greetings from Canada.

[@stealthg35infiniti94]

They should have call Eric or Ivan and saved lots of money from the parts cannon.

[@PistonShack]

@@stealthg35infiniti94 That's correct or call another Eric from SMA, Paul from ScannerDanner as well)

[@mikeschaner5853]

100% truth.

[@khrazy_one6472]

Very educational and entertaining content. I'm glad I live in an era where knowledge and experience is easily transferable through youtube videos like this. Keep it up!

[@robertmedina6875]

Man Eric I really appreciate the videos! Thanks for being so detailed about the hookups on the car Eric! Because what is common sense to you is not to the newbies in the field. You make AWESOME VIDEOS!!

[@johnwilliamson2393]

Wow! You never cease to amaze and educate! Thank you for sharing, you do great work!

[@roxanneabbott8424]

Eric I could sit under your teaching for hours, thank you!!!

[@jerradguillory7909]

Completly professional wow. Great work and terrific explanation and i as a mechanic and constantly learning trying to be a technician appreciate your channels advice😎😎😎

[@1QMQY]

Exactly what typical old shops don’t understand, gotta KEEP UP WITH THE TIMES. Cars as old as the 2000s have hundreds of modules that control them, you need to have the equipment to work on them amd understand how to use that equipment. Great Diagnostic!

[@pontiacsrule8761]

This guy as always is a great teacher

[@88camaroman]

Man love watching all your videos, i always pick up diff.things to go about checking a vehicle

[@robertocantu792]

I enjoy watching your videos. You have much to offer. Greetings from San Antonio, TX!

[@Engineerboy100]

killer job on explaining what you were doing as you went along, very easy to follow and I learn a nice chunk. Thank you for sharing.

[@johnnyrivas4344]

Impressed with your attention to detail and explaining of where to put the leads and how. I would've loved to find this channel sooner! you'll be seeing some more interaction from me for sure!

[@Eweastwqgood]

Profesor mejor explicado es imposible, muchas gracias por compartir sus conocimientos.

[@siskiyouwoodsmann4279]

Awesome job showing mechanical component position through electronic wave forms💯

[@mikeschaner5853]

This was amazing to watch.. Comp test off of starter current.??...??? Mind blown.. Awesome vid. Keep up the great work man. Def got yourself a new sub

[@JoeUrbanYYC]

Great video as always Eric, your vids are better than a great mystery novel for my analytical brain. I haven't been watching YT much lately, I remember you closed up your shop a while back, are you purely mobile diagnostics now?

[@ganeshnarayan5505]

Hey Eric great job. your the man for this kind of stuff.

[@dangallagher7355]

Great work using the scope for relative compression vs pulling the plugs and using a gauge.

[@erik_cruz]

Methodically trouble shot and everything skillfully explained. Awesome content!

[@nikovandh]

Excellent. Very excellent diagnostic video! Great explanations during your process.

[@woppini]

When 2 channels is all you really need. Nice job my friend

[@7minnow]

Love how your quick an straight forward Great job

[@christdied4us]

Awesome tech!! Great job explaining the problem!! Diagnosis well done ✅

[@ramonmaldonado4884]

I'm glad I ran into this channel. Very informative

[@stefanos204]

well done Eric i see all of your videos and you must know that you have a fan from GREECE

[@derofromdown-under2832]

Great engine cranking sound effects Eric... LOL... 10/10 for the diagnosis...

[@fastrice3461]

You’re a real Master Mechanic! Well done!

[@redneckdrennan745]

great diagnosis. as soon as i heard it turn over i heard the sound of death and would have stopped

[@richard1835]

I appreciate your diagnostic videos. Always something to learn about and for helping someone to perform the job properly. People are not maintaining there vehicles. I do alot of Auto A/C work and always check the fluids and condition of the vehicle. I make recommendations based on what I see and hear. I have seen sludge oil, no oil, and what used to be coolant, with these vehicles. The A/C is more important than oil in the vehicle or coolant in the cooling system. It is amazing what I see. I do keep these fluids readily available because I want them to leave without a coincidence. Rattling Timing Chains but no A/C. Fix the A/C and I will deal with the broken timing chains. You have to be so careful with these peoples vehicles. Alot of neglect. Get the job done and move on.

[@MrJgonzalez2]

Love the sound effects

[@Angelo80907]

That was clear and straight forward explanation. Gotta get me one of those labscope thanks!!!

[@chrisc4924]

Beast! I would love to have this knowledge. I wouldn't even know where to start. Maybe one day. For now I'm just a backyard mechanic. Keep up the excellent work!

[@vicarod]

I seriously doubt that shop is capable of replacing timing chains if that's all it needs. Hence the motor swap. Great video and diagnosis Eric!

[@ethanwinters9619]

Yoo there's no way dude, this just happened to my G37 yesterday and I'm glad to have found you

[@NolanMotorsports]

I started watching your channel with the purple Viper fix. Here I think I’m pretty good at fixing cars but you’re next level lol. If you’re ever in Dallas and want to check out a proper early model Viper lmk 👍

[@petar443]

Thanks man ! Keep it up the good videos .

[@rankiad]

Love your videos, keep up the good work!

[@fredsalter1915]

My first guess when I heard you crank that engine was "timing is F-ed Up". Keep these great vids coming, sir!

[@jcmobilediagnostics8611]

Based on the RC test it pretty much proves the timing fault. Good video Eric.

[@sambitar8448]

THANK FOR A COMPLETE DIAGNOSIS AS ALWAYS

[@sergioduenas1533]

I had this once with a customers 350z. The second I cranked it and it backfired through the intake I new someone's gonna need a new engine . Checking the codes n compression confirmed it for me. 3 dead cylinders n crank/cam codes. Great content bro #mechlife

[@patricksmith80]

Outstanding Diagnosis !!!

[@chris.dellafave]

Good video. Your a smart man. Right to the point. It’s appreciated

[@5kwattz]

Love ur channel keep it up 👍 🍻

[@ChengSAE]

Definitely better to replace engine. Great diagnose process. I had assumed first with most nissans. Bad crank or cam sensors. I know it's a pain to do timing replacement on these. Very involved.

[@MartinM04]

Awesome video man!! Loving it

[@markferraro5250]

Great job Eric

[@MechanicTechnicianRepair]

Excellent diagnosis. Tec. Nice video esa es mi eramieta faborita

[@eduardocastillo239]

Very nice and well done man, thank you for sharing you knowledge wirh everyone else. That is how we are suppose to learn, by doing and grrr getting dirty. And people should appreciate what a good mechanic has to go through to earn a buck, not every diagnostic is simple and easy, some do kick your butt!

[@meabob]

LOL But we have a computer that will tell us what's wrong so figuring it out is easy. (I'd like to smack those kinds of people)

[@florenciomartinez3695]

Can you make that cranking sound again!!! As an auto electric tech shop owner I have learned alot from you thank you and keep up the great work

[@arthurfricchione8119]

Eric excellent video and troubleshooting. Have heard back from the shop or did the replace the engine? Eric thanks for sharing and stay safe and well Artie 😊

[@speedy_pit_stop]

Speaking of timing. ..On many channels I end-up increasing the playback speed, as I often feel they are wasting time. Your approach is better, BANG, here it is, so I don't need to do that. Thanks for the quality, super-concentrated and highly focused content.

[@riseabove3082]

New subscriber here - seen two of yur videos so far and I liked them.

[@DTUFINOPhotography]

Love watching your videos, i dont own an infinit but planning on picking up s used FX35 (Maybe an 08). Liked and Subbed! Keep up the amazing work!

[@luis140500]

Great video I really enjoyed it 👍

[@ADVANCEDLEVELAUTO]

Thanks for watching!

[@nicksteinbuch1561]

Very well done sir!. Spot on. Probably ran low on oil. Very common on the vq .

[@jonathanrodriguez1185]

Im so glad I subscribed. I enjoy watching someone who knows exactly what to look for and how to explain it.

[@xnotx2]

2:00 yup, that was my thought instantly lol Flawless diagnosis!

[@gonzgarr1592]

great vidio with great info thanks

[@DiaperSNiFFER]

bro i had a similar problem with my infinty m35x. except no power for my scenario, long story short it was some sort of fuse i don't remember with one thou. keep it coming brother i love this videos

[@julianbarrios1275]

you are talented my man!!!!!!!!!!!

[@badboytommy187]

Good diagnostic 👍 not too many good mechanic out there ,all they do is parts changes .

[@juancarlosartola747]

minimo...........excellente the video and the diagnostic. professional........thank you masther eric ......forever and ever......

[@dplorbl]

Great diagnosis

[@richardperkins3612]

Thank you for the education ! 🤩

[@whitetiger8652]

Great diagnosis!

[@MD-xw3gd]

I liked and subscribed. Your a good talker.

[@AzeezOverseas]

Great diagnosis...

[@jgeorges3061]

ERIC, AWESOME approach brother that shows how professional you are I wonder if u scanned the car if there was any correlation code and as always great video to the point thanks for sharing. cheeeeeers

[@ADVANCEDLEVELAUTO]

I didn't bother scanning the car. The battery kept dying so I know it probably had a bunch of false codes. Thanks for watching!

[@kostasnikonor3770]

Very educational Very useful. Thanks.

[@DustinxCameron]

Love you bro! Your an amazing teacher.

[@orgtua4x48]

Good review Eric....as previous episode...keep supporting you ...keep post a good content..

[@ADVANCEDLEVELAUTO]

Thank you for your support!

[@orgtua4x48]

@@ADVANCEDLEVELAUTO yes,..welcome Eric...

[@scroberts9316]

It's unfortunate the owner didn't know about you in the beginning. Timing chains are supposed to be much more reliable compared to a belt, plus it's sad that just happens to be an interference engine. Great diagnosis btw!

[@JoelAutomotiveInaction]

great diagnostic

[@gmak1n785]

Great video dude

[@billneu9520]

Another great video Bill N LINY

[@germangarcia9918]

Thanks again, for your Good Info,!!!

[@lobssangmarrero4781]

Great video and diag. Curious to know what was the code or codes u pulled? Was it a p0019 or p0021? Seen this a few times on these engines. I think it comes from wrong type and or low oil allowing the chain to stretch and or guides to fail. The other techs/ mechanic should had known better than to throw parts at it

[@angusalamezie6193]

Eric we will always wait for you

[@ADVANCEDLEVELAUTO]

Thank you!

[@johnwilliamson2393]

You know it!

[@johanarias1940]

Amazing explanation 🙏

[@andrewvillanueva4222]

Its always good to see you solve the problem. There ok mechanics and there are good mechanics. You are a very good mechanic.

[@BigEightiesNewWave]

This guy is Gold.

[@khasem87]

good video thanks , but where you can get good known signals .

[@justinpsychomonkeyjohnson2845]

I watch your videos as a tool. I'm about to start making my techs watch them

[@farrellwatson1428]

You’re a bad man with the skills you have.

[@tickyul]

Great job!

[@victorpecina7137]

Video chingon carnal saludos

[@htownblue11]

Crank immediately sounds like low or no compression. I’m 2:08 into the video….. Looks like timing issue and possibly isolated to one bank (5:40 into video)….….BOOOM! I was correct I believe. Had to do a cam crank correlation on a Range Rover I owned with similar symptoms. Awesome Eric!

[@Rein_Ciarfella]

Great information, even for a DIY guy like me without all the expensive equipment. Thanks so much for doing this one! Also, what’s that classic ride in the next bay?!!

[@EATSLEEPFARM]

One of these channels I like before I even watch 😎 great stuff as usual bro!! So glad you show how you actually hook up your scope and go through almost every step. No skipping around your actually teaching. Would def like to see more scope videos explaining why your doing what your doing.

[@Ironblank1]

Exactly! Most of the other channels do not show the step by step of the process. This guy is actually teaching.

[@EATSLEEPFARM]

@@Ironblank1 thats why hes one of the best bro 👍

[@fernandohood5542]

Awesome skill. Why is there a need for so many pulses on the camshaft?

[@iambeerus6744]

Damn i was hoping you fixed it...love your videos bro..eres una verg.....

[@joemmanraief8619]

Hey man your good Iam learing ton of stuff here 👍👍

[@on-site4094]

Eric top notch tech

[@opereznine]

Nice video, I have a Nissan Altima 2009, it does the same but the motor sounds very good, no arrhythmia. Any suggestions? Will greatly appreciated. Thanks

[@Android_Warrior]

On your videos I"ll do the thumbs up first and then watch the video.