Install TAB Performance Folsom Prison Bars on Indian Challenger

[@CarlosRamos-dj5vw]

Thank you for the great video. You guys make installation so much easier and save us a lot of money because the dealer wants to charge five hours for this type of job. 😂

[@TABPerformance]

Glad this video was helpful! Funny enough, we were just talking about what some dealers charge! Have a great 25' season!

[@stevewalters6403]

2024 Pursuit Disassembly Feedback: - The heated grips introduce a few more connectors to deal with when removing the clam shells - Due to the heated grips, the clutch side grip is not glued on the the handlebar like on the Challenger. There is a screw underneath the grip you need to loosen. - The lower fairings restrict your work space when removing the riser bolts, but it can be done without removing the lower fairings. - Between the harness connector and where the wires enter the bars there are a few zip ties to snip before pulling the wires through the bars. I did not see that in the video so be sure to look for them before pulling on the wires. Everything else in this video for the Challenger applies to the Pursuit for disassembly.

[@TABPerformance]

Thank you for your feedback and helpful information, Steve!

[@karlneumeister2802]

Not sure if I wanna go with these or the KST bars, Comanche bars, but it be the sixes

[@TABPerformance]

Let us know if you have any questions. [e-mail]

[@kyleclose3499]

I’m stuck at the moment because my riser bolts are so tight they won’t budge, any ideas? I’ve tried an impact and nothing

[@CarlosRamos-dj5vw]

Where can I get that sticker for the side of my tank?

[@TABPerformance]

bravewolf.us/

[@CarlosRamos-dj5vw]

@@TABPerformance Thank you

[@guyver77]

Can bars be adjusted without removing the tank if you find that they are too far forward?

[@chiefjoseph8154]

Yes, but not an easy task. Leave the rear bolts lose

[@user-wm3cd7jh7x]

Is +4 the commonly talked about 12 inches? If I don't want to replace the cable in its original condition, what size is possible? Is there a need for a separate handle riser?

[@TABPerformance]

That is more of a H-D thing for the 12 inches talking about total rise to the middle of the grip. This is a plus 4 over stock height. I would consider the 6 more like a 12 for feel on H-D and all of our sizes can be installed with stock cables.

[@Tomtheo391]

​@@TABPerformanceEven the clutch and brake cable on the 8+? Thanks for a good video

[@user-wm3cd7jh7x]

My height is 170cm. question 1.Which size is right for you? 2.If I purchase only the handlebar, is it correct to use existing cables and handle risers?

[@artm9253]

Height size of the bars in the video?

[@TABPerformance]

These are the plus 4" version.

[@johnnydangerously7186]

Do these work with a 2019 Roadmaster with heated grips?

[@TABPerformance]

Yes, we have installed them with heated grips and are ready to rock and roll for that option.

[@Just_Me_77]

How much higher than stock are the plus 4" bars and how soon will the plus 6" bars be available?

[@TABPerformance]

4" and the 6's will be available in the next week or so. Very close, just waiting to get them back from powder.

[@tonyalb3863]

sooo much work just to replace bars WTF

[@TABPerformance]

There is a reason the dealership charges 6-8 hours for a bar install. Just a Saturday with some garage beers and friends to knock it out if you have the patience and know how.

[@tomambrosio425]

yea I agree thats pretty crazy amount of work. Seems like more work than a Harley. I guess you got to make sure you really want the bars and the bike

[@Fox_406]

Still get more from Indian stock than you do from Harley so I’d rather deal with the extra work