Really appreciate your taking the time to review our fog light film covers for the Type R. Loved how you demonstrated the installations in both manners. Keep up the great work!! - Ben
@TORQToolbox5 жыл бұрын
Hey thank you so much for the compliment Ben
@BB_deez4 жыл бұрын
Pro tip: with the yellow overlays. With the dry install, don’t use a squeegee, tack the center on the light then spin your thumb in circular motion from the center out to the edge. Goes on perfect, no issues, no scratches, no heat required! Thanks for the video!
@TacticalToolbox5 жыл бұрын
I can't wait for the Power Mods
@mortysmith55564 жыл бұрын
Same
@savagebeastkiller34975 жыл бұрын
I love the new channel I'm interested in firearms but I love cars so now you do both 👌
@TORQToolbox5 жыл бұрын
Hey man! Thank ya for coming over
@the_batmobile0.44 жыл бұрын
This man content is a 10/10, explaining and installing in details 👌
@jasonchunyeo4 жыл бұрын
i know u from ur gun channel and i bought a type r recently so i ran into ur videos. i did a double take like "wait, did he have a car channel or gun channel??" i was going to keep my ctr stock, but now i'm having a hard time sticking to my guns. anyway, ur always making top quality videos. thanks man.
@mblake04205 жыл бұрын
The haze goes away, window tint is the same till it sets up
@TORQToolbox5 жыл бұрын
Good to know man...it's been about 2 weeks now and the haze is still there...How long does it typically take?
@Matt-xw6zu5 жыл бұрын
@@TORQToolbox Not that long. Usually a couple days
@madcatmeow1964 жыл бұрын
Ya. I put a wet application screen protector for my phone. It was hazy for a few days. Now it looks like there’s nothing there
@pedrorivera23082 жыл бұрын
Just a month or less to get a red FK8,,Cant wait!! Great channel 👍💪
@daverodda67013 жыл бұрын
The wire tap connectors have a through hole and a hole that stops the wire from going through so the end of the new wire is not exposed out the back side of the wire tap connector. When you install them with both wires passing completely through the connector the new wire sticking out prevents the connector from closing properly as there is a plastic wall or stop that comes down on top of new wire. this wall is there to bottom out end of new wire inside the connector. I enjoyed the content of your video and due to a Rogue Deer collision I am about to dive into replacing a front clip on my daughter's 2021 Type R Civic Sport Hatchback. Watching your various videos have given me great ideas on what we can do rather than just a OEM stock replacement of the various parts.
@Sakura-dq5om4 жыл бұрын
You know what’s crazy? I used to own an ep3 and one of the mods ppl used to do was to swap clear lights for amber lights because it was the “jdm” spec. A decade forward and it’s backwards.
@xd3lusi0nxx124 жыл бұрын
Stay on those opt 7 tail lights. Just installed the smoked version on my white hatchback and let me tell you, what a difference!!!
@fishpony12115 жыл бұрын
Damn that color red on ur car is so bad ass i cant get over it. Looks like my old crx
@TORQToolbox5 жыл бұрын
Thank ya man!
@sagerlover955 жыл бұрын
Doing some great work over here! I have a 10th gen hatchback sport and might follow some of your tutorials and links, right after my 9mm ar build😁
@ObiWanStromboli4 жыл бұрын
really like how informative these videos are. been looking at wanting to get a type and modifying it and these videos gives me great confidence in doing them. Congrats on the new subscriber here
@dannysantiago41964 жыл бұрын
I was struggling at first to take off the plugs from the headlights. But their is a black cape you press on the plug. And it should come off. Passenger side: right side Driver side: left side
@madcatmeow1964 жыл бұрын
Pretty awesome. I’m going to pick some up for my new Si. Thanks for the video
@IguanonPR5 жыл бұрын
Great vid. Finally decided to put on the LamynX tints on my Civic Hatchback, I already had them. Tacking the black trim off is the way to go if you have the tools.
@friz35844 жыл бұрын
I love this video thanks I will buying these items to add more mods to my R. Thanks!!
@TORQToolbox4 жыл бұрын
Awesome man... I'm glad the video helped ya👍
@mingusbreeze5 жыл бұрын
Thanks, very cool, inexpensive and dramatic mods.
@TORQToolbox5 жыл бұрын
agreed
@mr.tuckers28484 жыл бұрын
Nice video on lighting mods. When I was doing a rewiring job installing a head unit for my minivan, I used a better product than the t-taps you were using that allowed me to easily tap into an existing wire connection. They’re called positaps. What is sweet about this product is that you take the bare stripped end of a wire (in this case the red for the blinker) and a twist attach it to one end of the positap. On the other end of the positap, you attach your source wire into a channel and twist down over it. There is a sharp point within the tap that penetrates the insulation straight into the source wire and stay in pretty securely without needing to strip off any insulation. So far my wiring connections using these taps have no issues after 2 years of usage. There are different positaps that accommodate different wire gauges. 👍
@jdmkidk244 жыл бұрын
Sidemarkers look great!
@khvidtube16174 жыл бұрын
The haze is normal for tinted headlights. I have that on my Audi as well even it was applied by professional.
@WilliamBadmf5 жыл бұрын
I will keep mine 100% stock!
@TORQToolbox5 жыл бұрын
Nothing wrong with that man
@SIRICKO4 жыл бұрын
Yup im happy i found this channel Loving the content.
@TORQToolbox4 жыл бұрын
Thank you so much man
@Apolloneek5 жыл бұрын
Type rs were verry rare at Findlay only saw one
@TORQToolbox5 жыл бұрын
yeah same here when I bought it there was only one
@Apolloneek5 жыл бұрын
@@TORQToolbox lol maybe it was you who took our last one lol still havent gotten another in just si manuals
@cananghanreymond54375 жыл бұрын
Love your car dude. Looking Good..
@TORQToolbox5 жыл бұрын
Thank ya man🙏
@timmay67134 жыл бұрын
I bought the same light smoke headlight overlay and it looked too hazy so I took it off
@damianpeter804 жыл бұрын
Great video love the lights have anyone told you that you look just like Ron Pearlman
@WickedFk83 жыл бұрын
my suma side is not flush with the bumper. it has a gap in it.
@rafaeldiaz12445 жыл бұрын
Love your content dude keep it up 💪
@TORQToolbox5 жыл бұрын
Thank ya Rafael, I really appreciate it
@UNDERFUNDEDGARAGE5 жыл бұрын
More car videos !! Sweet.
@TORQToolbox5 жыл бұрын
Will do brother
@theoisgooddog4 жыл бұрын
Any tips on disconnecting the wiring harness from the headlight housing to install the wiring for side marker? Trying to install on my 2020 Si and no luck even getting it to budge.
@charlesjones42683 жыл бұрын
I have the same exact side markers but mine will only do either DRLs or signal. I can't get both to work. Do I need to get a switchback relay?
@kennupoiss3 жыл бұрын
These tinted covers have 2 layers? I think. One is ultra thin and must be removed when you apply those base layers on light.
@johnrebel89255 жыл бұрын
Lots of work for what appears to be not an equitable amount of return. Should I see your car around I’ll have to ask you how is it holding up
@TORQToolbox5 жыл бұрын
It's not as much work as it looks, it's just seems that way because I explained every step
@denisediaz59963 жыл бұрын
So, do the tints for the headlight make the LED’s darker at night? Is it not as bright at night?
@markcisneros5055 жыл бұрын
Hey man look into 50/50 mix of water and j&j baby soap
@TORQToolbox5 жыл бұрын
will do brother
@Chappers.Gaming Жыл бұрын
Why did they make the orange side light for??? Like why couldn't it of been white from factor and an indicator? They definitely miss this one ...
@MrGlvzmrk3 жыл бұрын
I have a question, is the process to remove the fog light bezel the same for the 2020-2021 type r?
@venturemotors88564 жыл бұрын
Cool mods might have todo some to mine
@brandonkeithley74645 жыл бұрын
“Squigee”
@OlDirtyBandit5 жыл бұрын
"Yallow"
@bliss73754 жыл бұрын
I bought smoked covers, but the vendor omitted amber bulbs. Are the required for traffic code to be amber or would the stock bulb be acceptable?
@sr3g.manila9994 жыл бұрын
love the firearm channel also👌🏼
@anthonystake65545 жыл бұрын
The tools to pop the plastics?
@IguanonPR5 жыл бұрын
He is using acuity trim tools. But you can use any brand trim removing tool, they work the same.
@TORQToolbox5 жыл бұрын
There's a link for them in the video description
@jonathancalderon35304 жыл бұрын
Hey brother did the overlays burn the material
@mr.vickterry3 жыл бұрын
How do you pull the black piece out
@mohddanielchris17023 жыл бұрын
What brand is the sport rims..?
@kennydied1175 жыл бұрын
My man.
@weduhpeople85044 жыл бұрын
You could just protect the wire with split loom from Harbor Freight
@hartmutthomas9894 жыл бұрын
Huhu. In my headlights, I see tons of tiny impacts in the plastic glass. Can this be repaired or does it have to go to the bin? Mileage: 21,000 kilometers.
@TORQToolbox4 жыл бұрын
You'd need to get a light restore kit like this amzn.to/2VWtuDN
@sav60383 жыл бұрын
Do you need a garage to put the tints
@TORQToolbox3 жыл бұрын
no sir
@tylerkeebs5133 жыл бұрын
Your the guy from gun review right?
@_manny4 жыл бұрын
Be wary of installing their films. I had them on my focus ST and it caused hundreds of spider cracks on my headlights over time.
@TORQToolbox4 жыл бұрын
Whoa... How?
@_manny4 жыл бұрын
TORQ Toolbox I'm assuming a mixture of the application process and the heat that gets trapped by the film. My pre cut film wasn't fit properly without having to really stretch it. I'll DM you pictures once I find them
@TORQToolbox4 жыл бұрын
@@_manny Dang man... Thats crazy. That's the first time I've heard of that happening.
@_manny4 жыл бұрын
TORQ Toolbox just sent you a DM on IG
@mblake04205 жыл бұрын
Dont use those splice conectors.......
@jojo-cx4cn4 жыл бұрын
I open my headlight n after that all crack my headlight..not rekemen tinted your headlight.
@K03sport4 жыл бұрын
Wire loom!! Use wire loom. You really really need a drop cloth, or special mat, or dedicated work bench to work on. Do you clean your guns with stuff just sitting on the concrete; I didn't think so....
@TORQToolbox4 жыл бұрын
I actually installed some wire loom, but they didn't arrive in time for the video
@antonho59034 жыл бұрын
LOL
@Matt-xw6zu5 жыл бұрын
Get some more light. Too dark in the video. Where's the after shots?
@TORQToolbox5 жыл бұрын
yeah...it looked brighter when I was editing
@Matt-xw6zu5 жыл бұрын
@@TORQToolbox Where in Phoenix do you go shooting? I'm in Queen Creek and looking for somewhere to go besides the range.
@Matt-xw6zu5 жыл бұрын
@@TORQToolbox also, I'm a v8 guy but I'm digging the type r...and the bufferless ar to go with it
@shenray3372 жыл бұрын
Just connect them to the ACC in the fuse box….
@scottdiver364 жыл бұрын
wouldnt it be better to put a yellow bulb in your fogs ?😂
@TORQToolbox4 жыл бұрын
With the Type R the led bulbs are integrated into the housing. So unfortunately no
@MrKanderson2234 жыл бұрын
sounds weird but do film applications in the bathroom while running a hot shower to after one, no dust
@TORQToolbox4 жыл бұрын
That's not weird at all
@vench1124 жыл бұрын
Oh man please for the love of god don’t use those scotch-locks. They’re the most Mickey-mouse connector ever made. If you want it to last wire it properly.
@mblake04205 жыл бұрын
Probably didn't hear back bc u are a gun guy, discrimination my man
@TORQToolbox5 жыл бұрын
They knew I was a gun guy from the start
@77doppelkorn774 жыл бұрын
Pfusch ^^
@hartmutthomas9893 жыл бұрын
Mal abgesehen davon ,das es bei uns verboten ist . Ich sehe keinen Sinn darin .
@9MMSWORD5 жыл бұрын
Don't get those cheap ass headlights, nothing but trouble trust me there not even worth it
@h5ibluntman3 жыл бұрын
At least use butt connectors, if your not going to solder it. The things you used are crap.