installing our onboard coffee roaster

[@arthurraymond6239]

Why is this channel so woefully undersubscribed 🤔it’s a travesty 🙁probably the best thing on KZbin 😊and probably is an understatement 😎👌👍😎

[@zoeg7985]

Another great visit thank you. Anyone else notice William is looking more like Jo of late? He used to be a mini Vic but lately he’s morphing into his mom! I love seeing him grow and change thank you again you guys xo

[@monicadarrah8425]

I thought the same as he said bye!

[@brianthompson5613]

At 8:35 where you spin the top of the mushroom vent takes me back to 66 when we were on our own canal boat on the Staff and Worcester Canal. We were on a short trip and dad had sat two vents into their spaces. He did not secure them unbeknownst to me. I took great glee in spinning one of them, until I gave it one almighty spin which sent it flying off into the canal never to be seen again. Needless to say, I was banished to the cabin for the remainder of the trip. Love your channel.

[@daveallen63]

William nailed it, "It's a hole". I mean you asked. LOL he's a great little fellow.

[@elf5012]

Oh my gosh, when the locals smell that delicious coffee roasting they will want Jo's delicious desserts right then.

[@jamesellsworth9673]

A fine feature of this video is the look at a boatyard as a community of people.

[@CBersPond]

Great video guys 👍 Vic - your recent video grabbing some beans and grinding them before heading to the office has got me back on buying fresh beans again. Watching the installation of the smoker with interest. Hope you're all well.

[@kimbolton2842]

So look forward to your videos on a Friday. Thank you for sharing your life with us ❤️

[@SuperNickbb]

Who'd have thought, watching a bloke drill a hole could be so appealing..... But it is! Nice work Vic.....and Ben.

[@steamingiron]

I absolutely love your vlogs but the one thing I don't like about them is when you turn to the camera and say........ " I think we'll leave this video here"🤪 xx

[@paul-88E]

So true, I don't want them to end. So peaceful to watch. Easy. Just nice and relaxing.

[@alisontaylor6135]

Loved the product placement of Jo's book there! xx

[@suehall3298]

Bye 👋 William your Dad & Mum make Brilliant video's see you all in the next one 🤗👍🌹💐🌹☕🍰☕🍰 Love Sue ❤❤❤🇬🇧❤❤❤

[@franktuckwell196]

I was going to say for the coffee, its a pity we don't have Smellvision, but after your comments on your run, i'm jolly glad that Smellvision hasn't been invented yet.

[@TheFairyQueen]

The next time I’m in the UK I am definitely coming for a coffee and pastry. I enjoy her one liners so much 😊.

[@lyndamorrissey6646]

I would suggest another coat of Osmo on the work bench. It will make a big difference

[@jean-pierrescherer8250]

Sure will improve and while applying, do not rub against the woodgrain !!!

[@paulyoung6165]

Hi There Vic Joe and William , Hope you are all well , Great video so enjoyable to watch , And what a Great job you have done on Holly , loved it All , so Thank you for Sharing , keep up your Great work , Take care All XX 👍👍👍🌟

[@aprildixon-ff1bc]

I roast my own also , Brazilian green beans . Absolutely love it and so much cheaper 🎉😊

[@susannecollins8765]

Holly is coming along nicely!

[@markrant1460]

Hi Vic, Love watching you work on the boat. You take your time and do the job right with the right tools, two thumbs up to you. HINT: When you cut pipe draw a line around the circumference. Then as you cut through the pipe, rotate it and follow the line. I have always found this to provide me with a good straight cut. Take care, Mark Alberta, Canada

[@vadmal5210]

I like these instructive DIY videos. They make me convinced that I will always hire a craftsman ... 😇😇😊

[@paultrussy]

The hole cutting went a whole lot better when the hole cutter was spinning in the cutting direction. 😳 On the whole it was a good job - I w-holly approve 😁👍

[@paigelorrabeth]

Had to hunt down a comment where someone had also noticed the drill being in reverse! It seems to be going the right way when it finally cuts through. Easy mistake to make!

[@paultrussy]

@@paigelorrabeth I was working on the fuelboat at the time so was around to assist - after drill direction change I spent a few minutes squirting cooling fluid at the cut and hey presto - job done 👍

[@janiep2931]

Any chance of sometimes a bit more cake making with Jo? Love watching her and tends to give me encouragement to do some baking myself.

[@ashleighmackenzie8670]

Second this. But they aren’t open at the moment while they do the work on the boat, so I’m sure that’s why we haven’t seen any of that, because she won’t be making cakes if they aren’t open.

[@janiep2931]

@@ashleighmackenzie8670 Fair enough if that is the case. Just miss the cake making. Hopefully Jo will be back soon with her delicious bakes.

[@susanB24F]

I can smell that roasting coffee all the way to San Diego!

[@cathygreen5719]

Always great to pop in for a visit, with the nicest people on the planet. 😊. Cool, calm, creative. From Cathy. Port ELIZABETH. South Africa ❤❤❤❤❤🎉🎉🎉🎉🎉😊😊😊😊😊

[@maureenlowther7621]

Love your channel and what a good job you made of the roaster.❤️❤️

[@layalabi1667]

Bravo for all the DIY stuff you do! Looking forward to the finished kitchen. 😊

[@mozismobile]

The shiny, shiny coffee-smelling vent!

[@matildastewartgriffin4771]

The up and down method for starting a siphon is ingenious. Love the videos!!

[@stephaniegarrett3246]

A most relaxing vlog.. You are doing a beautiful job on Holly ❤️🙏

[@Acapulc941]

Your talents are endless, Vic.

[@dr.chrismort8448]

Nice video 👍

[@krimke881]

"Yeah, with lubricating oil and slow speed. It'll be alright!" .. Vic continuing to drill 90% of it,,, dry. 😅

[@susannahwhitaker994]

Thankyou for my holly family fix lol. Love popping into your life lol 🤗

[@Lee_Proffit]

Vic, pull that pipe down and add some sealant to the top, to stop the fumes coming back into the boat and to stop the heat escaping in the cold weather. Personally, I would have removed that rear window, fitted a bit of plywood with a hole in it and gone out that way. saves you having to make good if you remove the roaster and one less place for the water to enter 😞

[@dennismatthews6660]

Thank you! I love the personal touch to your videos. Always including the viewer.

[@_Tiamat_.]

💜💙💚 Happy week-end.

[@simonsolo7750]

I love the way William innocently says it's a hole. If he was older it would of been sarcastic 🙄 😂😅.

[@laurah8556]

Well done, I'm sure Alex and Jo are relieved👏

[@deborahreynolds1552]

Love It!

[@Esther-rehtsE]

That looks really great. I like it when you can still see the wood. It's a beautifull piece of wood you have there, for as far as I can see from up here😂 A lot more space for cakes🥰🥰🥰

[@SueC-oj6zv]

Aww well done on all that hard work Vic, perseverance pays off and its looking great 🤩. Looking forward to seeing the roaster working…. perhaps on the next vlog 🧐. Have a lovely family weekend 😊☕️ x

[@johnnewton3837]

Thank you, a nice window into your current life. 😊

[@brianeggar]

Nice to see two craftsmen at work I bought off Ebay a tin of food grade bees wax from The Cornish Chopping Board Co that might have done the same job

[@heidimacarthur7205]

Wow! Fantastic new counter.

[@BoatTime]

Totally with you on the big dinners! 👌🏻

[@HellyAvard-xt6mz]

Thank you I love your videos just so wholesome

[@trevorpoxon401]

Loved the Vlog you make us feel as though we are at the side of you joining in. Well done guys ❤❤❤

[@suzannehicks5856]

Wish I lived in your country and close by. I’d frequent your establishment as often as possible 😊

[@WiLLiAMOnline]

I feel ya on the hole cutting shipmates! Patience and not too much pressure, a slower speed than you would think and some good cutting oil to help works wonders. I had to cut many holes in stainless steel and i'm not going to tell you it was always easy - once I even went through 3 hole cutters and one of the directors came out to do it in the end (i'd been using too much speed and pressure so the metal got hot and the cutting edges rounded off and went blunt)... *Sure this is a massive waffle about holes and metal cutting... but by god it feels good to vent! haha!! 🤣

[@philroberts7238]

Well, this cutting WAS all about the vent!

[@lottieholdsworth]

Looking really good and what a big difference it's all made, only thing is I would put at least two coats of sealer on them worktops think we did 3 for 1st time on ours

[@bradleybolton3843]

That dinner looked soooo good. Was it as nice as it looked? Great vlog

[@hughcarson6837]

Job welll done

[@KarenSFrancis]

better off with a non battery/plug in drill! I know - where would you plug it in! looks great - Ben is a true craftsman.

[@markkunath8440]

Time is relative! That hole took less time than you've had the roaster - so didn't take long at all. 😜

[@stephenworthington8508]

Take care 🎉

[@MissingLink-hb9ov]

very nice as usual, thanks for sharing

[@johnarnell4241]

I was here at the start when youd have been dragging that fallen wood back to the boats to burn 😂

[@Si-zy2lz]

You know he was thinking about it though.

[@pandrew3146]

Well done😊

[@joffey1212]

Great work as usual ,at the end going against the government I found upsetting ,they want to free the sausages and you go and eat them😊😅😂😂😅😊

[@jillosler9353]

😂😂😂

[@fatfish6763]

cool stuff

[@stephengreen6338]

Got to call for coffee and cake now

[@CarolWhite-il7ki]

Thankyou all take care

[@sweetpeainfrance6729]

Hello. Is there any chance of heat from the roaster scorching the worktop? Maybe you did more than one coat of the protective white oil? The hole is not easy as it's on an angle. Love your workmanship and ideas. I have a dream of coming to H t Cafe B one day when I am travelling not in France! Thank you.

[@sweetpeainfrance6729]

again i think about three layers of oil at least because when it has a wet wipe over clean the oil does eventually fade... You must also leave time between coats for it to properly dry or cure.

[@ChrisReadUK]

Time to polish some “mushroom vents?” 😂

[@MrFroglips69]

Another groovy episode. OMG, a coffee roaster. You people are just too cool. Are you big fans of Banger and mash? I am

[@Celticcross688]

Hi Guys how are you all 😊how is lil Billiboy 💞 Like your Kitchen looks great 👍🏻

[@anfieldroadlayoutintheloft5204]

great vlog on channel thanks for the vlogs on channel thanks lee

[@allpicturenosound]

More Ben please 😍

[@davidh.5204]

Wow! Never been this early into the comments section - nice to be here! :o)

[@grendel_nz]

Did you put a bead of silicone under your mushroom vent? To reduce water ingress? And file yer edges ;)

[@frankquevedo6001]

Question; Is your big Green cooker, cooking?

[@henrywilliam8506]

Great vlog but it had me very worried. You opened the vlog with the remark that something had died and stunk. We had to wait until almost halfway through the vlog before we saw Jo and William. I thought, Oh no, he’s bumped Jo off, who the Hell will do all the baking in the future?

[@fatfish6763]

Installing my coffee roaster

[@ohioclassCcamper]

I was surprised you did not have to put colk between mushroom and metal roof. But I only have worked on fiber glass roof on RV so probably different. Hard to put hole in a roof always makes me nervous.

[@flyergowest]

👍

[@fergusallan7187]

One meal a day ( omad) is a fantastically healthy lifestyle. Keep weight off ( not that u need to) but also helps keep blood sugar and insulin down .

[@c1p1moore]

Excellent content as per 👏 Is it me, or are your vlogs shorter? Take care all 👍

[@leonielawrenson7606]

❤❤

[@Dore60]

👌👍

[@martykitson3442]

🤠👍👍

[@desmondrobinson169]

I’d watch you watching paint dry

[@veronicasmith1147]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@marcfuller7531]

3:50 - Isn't that going backwards? Obviously could be the frame rate making it look so but later seems to be going the right way. :)

[@isnoo1]

🥰🥰🥰🥰🥰🥰

[@realamerican6101]

So, King of Mushrooms lives on Holly roof?

[@jean-pierrescherer8250]

Cover the plastic pipe with sm old copper colored foil please, my ocd is killing me very painfully

[@xIDarkSideIx]

early for a change 👀👀

[@johnkey1682]

OMAD it's a thing

[@Mach_One_Photos]

your getting near the point where you start listening for the 1st crack and how far past the 1st crack you need to go to achieve your desired roast profile 🤣🤣

[@pocketchange1951]

👍👌❤🇨🇦

[@donaleeslack4925]

Sorry Ben lol there is caffeine in tea😊

[@jhenline7813]

Ben asked for herbal tea..no caffeine in that

[@terenceseymour-tf8rptassie725]

Most herbal teas are caffeine free .Some herbs do contain caffeine .I googled and the advice was to check the ingredients before purchasing .​@jhenline7813

[@ribohne]

Enjoy your videos but a bit concerned that a plastic drain pipe as a hot air vent and the heat from a coffee roaster are not going to be compatible. Dangerous even. If it doesn't melt you may have an issue with toxic fumes from hot plastic.

[@balibelle63]

Oooo first here!

[@robsin2810]

Two coats of marine varnish for the bench top, would work a treat.

[@antonyjh1234]

I don't think the roaster is a good idea, I live by a commercial roaster and it can get quite acrid and extra heat in the summer?

[@themenagerieminder]

🩷🩷🩷

[@Jacquiscraftingfun]

Love the videos but there is a serious lack of Jo and William. Not that you arnt a good watch but I really do love the videos when you are all in them more x

[@lindachadwick2911]

Please wear a mask - too much dust being inhaled!!

[@isaakwalton9600]

"Installing our new coffee roaster" - sorry but you're in danger of boring your followers to death.