Tesla Turbine [Smoke Flow Slow Mo]

The first 100 people to go to www.blinkist.c... are going to get unlimited access for 1 week to try it out. You'll also get 25% off if you want the full membership.
Patreon Page: / integza
Follow me on Instagram: / integza
In this video, I give a detailed overview of my journey on building a Tesla Turbine using resin 3D printers.
Anet N4 Printer:shop.anet3d.co...
Ortur Master Laser Engraver:www.gearbest.c...
Resin (Good Quality):www.amazon.com...
Standard Tesla Turbine (3D Models):www.thingivers...
Volute Tesla Turbine (3D Models):www.thingivers...
Venturi Nozzle (3D Models):www.thingivers...
Instagram: / joel8leoj
Steam turbine documentary (1946) - film-directory....
Music
A Mission - Scoring Action by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
Lazy Boys Blue (KZbin Audio Library)
Komputo (KZbin Audio Library)
Take Me Out to the Ballgame (KZbin Audio Library)
How About Nah (KZbin Audio Library)
Folk Love (Artlist)
The Bone (Artlist)
Arkansas Traveler (KZbin Audio Library)
Cherokee Shuffle (KZbin Audio Library)
Rap beat 1: • [FREE] Freestyle Type ...
Rap beat 2: www.looperman.com
Trickster (Artlist)
White Dream (Artlist)
Lift Motif by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/
Bro Time (KZbin Audio Library)
Late Night Drive (KZbin Audio Library)
Beach Walk (KZbin Audio Library)
I Feel Like Partying Right Now (KZbin Audio Library)
#Tesla #3dprinted #turbine

[@integza]

So at 3:22, the turbine is turning in the opposite way. I know, my bad!

[@kashv1793]

I came in the comment section just to see whether anyone else noticed that.

[@christo7059]

Name it "Lady Janett"

[@bravojr]

Look into the inner workings of the Stirling motor... Then contemplate what happens when you make radiators with coolant, and then contemplate what happens when you "decompress" heated coolant using a compressor on the opposite end of what you'd expect one to be. A heat gathering device of epic proportions? Surely there's got to be a key where hyper efficient pressure mediums can siphon heat and pressure differences in a super compact way.

[@notsure9735]

Who is that next to Tesla on the picture in the background? It looks like Momar kadafi?

[@aadj1]

Call the new printer R2-Eta, because that is what you need to 'improve' that Tesla Turbine. The coefficients of determination to efficiency for whatever your salient parametrics might be. (Hopefully not curious turbulent inlets driven by handheld shop-air nozzle with large inconsistent velocity vectors & profiles.) How about some parametrics related to the boundary-layers on the rotor disk:pack surfaces. Possibly controlling and measuring the inlet & exhsust pressures (and temperatures if getting high power extraction), will add some further independent variables to the efficiency map. Where it's most efficient, may be far from where it's producing a high output. The magic is to optimize power and efficiency. Uniform flows across the width of the disk pack as well as the effective Reynolds No. from OD to ID. Is another head scratcher. Hey, here is a thought, why not just power the TTT, measure the power and speed, and the now dependent inlet and outlet flows and pressures. Explore its performance. Gee, wondering if disk surfaces are better with Tesla valves instead of just simple spaces? (... so don't be an Isaac (fig) Newton barber and cut me out if it twerks :),

[@inferno7181]

"I am now the proud owner of the world's crappiest tablesaw" Strong words from someone with a table. And a saw.

[@noahpaulette1490]

Damn that's dark.

[@richardlibby2407]

Funny. He owns at least 3 LCD 3d printers, a few PLA 3d printers and no $50 table saw from Craigslist.

[@shottysteve]

I like how real you are about the process. Some of the creator experimenter youtubers cut out their mistakes and imperfections as if that’s not an important part of the learning process- or they’ll make everything in their 50 thousand dollar shops with equipment we don’t have access to. Like, I got a 3d printer but I don’t have room for a bandsaw or machining equipment in my studio apartment lol

[@integza]

Thank you ! It helps a lot that I'm genuinely an idiot that has horrible ideas ahahah

[@fhaxaris291]

make vidja

[@周暘恩]

by showing the mistakes u did, it really encourage me a lot. as a student of engineering department, i am afraid of making mistakes while doing my personal projects. and this thought has bothered me for a long time.. but, after noticing that even u, a far more experienced and skilled master compared with me, may also make some funny mistakes and even dare to admit it to your audience, it really boosts my courage and encourages me on designing my own models as well as trying to print it out without any useless worries. thanks a lot ~~

[@AISC95]

I also appreciate showing the mistakes and problems found along the process. It motivates people to keep failing until you become successful. Iteration brings you closer to your objective, but persistance is the name of the game!

[@FirstArchon]

on the other hand he's the only youtuber i've seen who can make pulse jet engines and still make the takeaway from nearly every video "i'm a great big dummy who accomplished nothing"

[@Chsymstrd]

this dude has like 7 500+ $ 3d printers, but he had the worst tools known to man

[@ChaseBlackmoon]

That's what irritates me about this 3D printer craze, any hipster can get one and be a "crafter" without starting with a good set of basic tools and knowing how to use them.

[@orange1248]

You never know when you need one :D so you dont invest on it, either way he knows how to improvise and make it work... kind of...

[@sarchlalaith8836]

They're 200 on amazon

[@russhagan861]

@@ChaseBlackmoon Don't need to know how to use a scythe when the future is all lawnmowers.

[@ChaseBlackmoon]

@@russhagan861 both things still have blades, and you still should know how to sharpen one with a file.

[@bugass81]

If you have eight kids you don't need a turbine to grind wheat. You can just make your children do it. You can bribe them with cigarette bouquets.

[@bugass81]

in all seriousness tho, great job you made an amazing turbine using a fascinating design.

[@integza]

@@bugass81 Dude, don't ruin my intro! Thank you :D

[@bugass81]

@@integza Whoops sorry

[@ComradeJehannum]

@@bugass81 slave labour for the win!!!!

[@bugass81]

@@ComradeJehannum kids who grow up on farms usually do some work and remember, they are being payed with cigarette bouquets. So it's not slave labour it's just a really strange and sad currency.

[@PexiTheBuilder]

"I don't have tablesaw, but I have table and saw, how hard could it be?", my method too :D

[@Mayosoftware]

I would have put a 90° rod/metal bar sticking out, and a screw at the end to make a radius cut.

[@commiezombie2477]

Fxcking genius. 😎😎😂

[@boia9228]

Ok

[@luminousfractal420]

i got here trying to build a laser cutter on the cheap,😬😂

[@11Denis11]

I would need to use the saw on the table to make a table saw xd

[@oandy1010]

“The pressure going down means that it SUCKS” That earned a subscribe, and the rap earned a like.

[@Awrethien]

"I have a table and I have a saw. How hard can it be?" Immediately starts laughing knowing what's coming next.

[@steelthfighter]

hey. i mounted a skill saw to a board and called it a table saw. the board just sat on two saw horses

[@Awrethien]

@@steelthfighter Not saying it can't be done, but be honest how many times have you kicked yourself for saying "How hard can it be?" I know I have way to much lol.

[@AlexTheStampede]

I have a table... I have a saw. Mhh! Table saw!

[@jonskowitz]

That looks like my solution to not having a table router

[@puddlez7936]

Call it Edison. Cuz Imagine Edison recreating Tesla’s inventions, and getting credit for it.

[@sober667]

Thats Genius and evil in the same time LOVE IT :D

[@jacobopstad5483]

I don't think I can do better. That's great!

[@NatureNatesVivarium]

I had a great name in mind, but this is so much better that I'm just going to give you a thumb instead

[@krome-craft1023]

call it donald trump cuz of the tan

[@Hebdomad7]

Tesla actually worked for Edison for a short time. So I'm not surprised if Edison attempted to do just that.

[@AlvinBalvin321]

no, if u have 8 kids make the kids do the work

[@Arduino_and_Redstone_Pro]

That’s slavery

[@minhhoangvo4759]

​@@Arduino_and_Redstone_Prowith extra step

[@FusionSource]

Nikola Tesla is also my favorite inventor, what an amazing man, just imagine if he had a 3D printer. Great videos, love your style.

[@twistedyogert]

Just imagine what he could do with a modern computer.

[@Retrodogo]

Just imagine

[@l5-cs.]

He wouldn’t be able to do much because you need filament (or resin!), cables, and a computer...

[@robertjames1259]

Just imagine all the money to Tesla. That he deserved. It would be the world’s money a googzillian puttilain Imagine more than money and love. Impossible. Obviously we don’t deserve it. Let us love and care for all and natural god. In Tesla’s name I pray. God bring him back. Reincarnation. Amen

[@corporaldestroyer2811]

Robert James you really do be inventing new numbers

[@TwitchFast]

"Join me, because i don't want to be alone." The desperate plea of a man.

[@jacobc7114]

Famous last words: “A table saw is basically just a table with a saw. I had a table. I had a saw. How hard could it be?”

[@MBrulla]

When your list of mistakes is nearly as long as your list of steps...you're a true maker. Wickedly awesome video!

[@mj6463]

0:44 is it bad that my immediate reaction was “easy, put those kids to work”? 🤣

[@andremicallef6370]

M J yes yes it is

[@herculean616]

Well yes but actually no Kid has to at least help making the bread making easier

[@mememan2344]

@@herculean616 kids aren't supposed to supplement you being a failure. Either you can provide for your family or you shouldn't have had one.

[@shaxuesheng6128]

@@mememan2344 well thats what life is in the country side, and some other countries too. Also it is good, they get used to work so once they grow up they arent lazy shits, its not like they wont get to eat the food

[@mememan2344]

@@shaxuesheng6128 eh well not my problem I am not having kids

[@IexoPeoa]

I seem to recall a video elsewhere on KZbin where a Tesla Turbine was run at sufficient speed that the centrifugal force of the airflow reached an equilibrium with the exhaust vortex, resulting in a steep RPM increase and higher efficiency. The speed was 50,000 RPMs, after that it jumped to 70-80k and seemed to smooth out. Might be worth testing...

[@l.a.wright6912]

Yeah I spent his entire testing going "let it Rev up damn the" at my phone. Tesla turbines massively increases in efficiency and torque when allowed time to accelerate as it allows the flow patterns to reach their ideal forms

[@michaelstout776]

6:54 You're music choice and editing skills have transcended the physical plane. Thank you for showing us true beauty for all it is.

[@integza]

Arigato gozaimasu!

[@sagasmith3572]

Time for that good comedy and science Duo

[@jonesmatthew7511]

Even after 4 years, I love this video. Keep on developing technology!

[@phil-lp7038]

u are basically Tony stark who has fallen in love with tesla

[@toptecboy7697]

That is very true.

[@dr.rajasaurusandunclebonec6526]

I wish I could be Peter Parker here...

[@brandonwebb9967]

@@dr.rajasaurusandunclebonec6526 everyone wants to be a superhero till its time for the snap

[@omsingharjit]

Exactly , m also thinking this 😂

[@danielboone9627]

I LITERALLY JUST SAID THIS TO MY SISTER IN-LAW ABOUT 30 MIN AGO WHILE WATCHING HIS "Hot air engine car " VIDEO!!! LIKE VERBATIM!! SO WIERD!!!!😂🤣😂😅

[@kruppstahl1686]

3:56 The internet ruined me beyond imagination

[@nialpollitt3410]

Same...

[@angrymario8259]

T H I C C C C

[@steve.b8872]

That was the first thing came to mind

[@TheZebinator]

hot glue thread? hot glue thread!

[@ketas]

blue cum on yoda, why?

[@monkey_man70-1]

Hello Integza, i have seen a ton of your videos and i watch a lot of other science youtubers. Yours are special because you are not scared to try crazy ideas and show more failures and mistakes. I think this is very important to young and curious people who have been discouraged because they havent seen others make mistakes like these, keep trying, and eventually see their work pay off and get that huge reward from their brain. They may sometimes only see or hear their colleagues succeed and it can be discouraging as sometimes they may feel as if they are not capable of understanding high level engineering or math the same way their friends or colleagues can. When i was younger I had a bad view of the world due to this and people like you awoke my child-like curiousity once again, thank you for all the work you do for all these videos.

[@jungletregaskis1696]

I've been watching youtube since the beginning, and your rap then, is the one and only thing that's made me ever want to like or subscribe to any channel or video, ever. And that's before you even mentioned subscribing. You are not alone Brother, Tesla be with you ☺️

[@jungletregaskis1696]

[e-mail] YOU are Not just some guy trying to make a difference man.. You are Seriously endowed with some kind of intellect that is rare and important. It is possible to find the ultimate solution. I believe in it

[@davidmoore7257]

Exactly

[@shanmahanama9331]

I accidentally saw this video and I was surprised and impressed by the amount of effort you have put into making of this video. So now you have one more follower :)

[@Andrew-pe9lg]

This channel’s underrated

[@nolanreach2088]

Thank you for your hard work and interesting content filled with meaningful information, humor, and a touch of individuality! Go Integza

[@integza]

That warmed my heart!

[@adebleswordfish]

I should have subbed so long ago “when you understand the secrets of the 3 - 6 - 9, you will have the keys to the universe” I think the true beauty of Tesla’s inventions was his use of natural/sacred geometry that is efficient in nature and unsurprisingly efficient for us.

[@CharlieSolis]

I hate to be the one to hurt your bubble but the “3,6,9” quote is not an actual Tesla quote. It’s disinformation intentionally spread to delegitimize the real works Tesla was working on.

[@nodriveknowitall702]

17:45 Seeing that spin up gave me chills as I imagined it failing catastrophically. Stay safe.

[@rowanvanwijk457]

But you were fine with the home-made table saw? XD

[@YukonK9]

I mean the more I look at you, you kind of look like Tesla lol

[@steelthfighter]

confirmed. tesla reborn

[@ClashClash89]

grow a 70s porn mustache and by next week, you can look like Tesla, too! ^^

[@spoot8835]

her name Anastasia

[@kdrgaming3344]

I love the Tesla Turbine. I love how he made the air fight against its own Conservation of Angular momentum by putting the air inlet at the point furthest from the spinning circles and the outlet right at the center, so the spinning air that wants so badly to go outwards cannot, it has to exit at the center, so it just coils and coils and coils and coils, 100,000 rpm later it can finally exit the center lol. It's so cool

[@db112nl]

You are a creative genius. Production value is amazing.

[@porkchop6257]

“The White Pigeon” Nikola Tesla’s only Love.

[@strangescience3414]

what's this🤔

[@gocybigt1]

Lmao what is this inner web I keep hearing about is it new form of spider silk storage?...... Do not touch my pigon like that!!!! I know she is absorbent but she's also a pigon go wash your hands again! XD

[@karlmarx4050]

"I have a table and a saw" Top ten last words

[@karlmarx4050]

@IPA SOLÉ LMAO nice

[@someonehungarian9002]

@IPA SOLÉ he meant a toplist made of 10 levels not that the words are made 10 words.

[@fuerte-af]

"At the end of a day I am just a guy with a few printers trying to make a difference" love the phrase... I am also an engineer let me know how my 3d printer can be helpful

[@joefoley4358]

I like to build stuff too and it's just satisfying to watch you build turbines, love this channel

[@OdokuroYT]

Finally someone who appreciates nikola Tesla as much as I do

[@MrSpying247]

How have i not found this channel before? Omg this dude is great.

[@mrmoncherz2574]

Right lol I just found this channel. I am loving the way he teaches .

[@Prippsie]

great video but I think the engine at 3:23 spins the wrong way?

[@integza]

Very well caught! I didn't do that specific animation. It is an animation from Wikipedia. Someone is gonna get fired ahahah

[@imagine3DIndia]

@@integza animation is in context of jet engine and is correct, reuse in context of turbine got it on to wrong side

[@FAB1150]

@@imagine3DIndia Is it? I think it's backwards also for jets, they push the air through.

[@azyfloof]

@@imagine3DIndia It's still backwards. The airflow indicated by the arrows would turn the blades in the opposite direction show.

[@Mayosoftware]

Here's my suggestions: On the interior of the turbine - Decrease surface tension by smoothing interior with hi grit sandpaper, fine rosin polishing and then cotton buffing. On the disks apply same process. You can also coat disks with a 3M product called "NeverWet" this creates a nanocoating that nothing sticks, and a micro-level (not nano) coat that the surface is smooth as can be. Without having thousands of dollars of equiptment, such as using steel and precision grinding. Yes I too am an inventor.

[@jamesgarlick4573]

I remember learning about the Tesla turbine and how one of the biggest drawbacks was the amount of warpage of the disks over time due to the high speeds and how modern composites like kevlar and carbonfiber can eliminate this drawback

[@CharlieSolis]

This is not an issue because Tesla turbines don’t need to be spun crazy fast like everyone erroneously claims. You just have to to know how to design it correctly. Every fluid, gasses and liquids, can be made to flow in highly efficient low Reynolds’s numbers laminar flow regimes.

[@randycastillo1404]

Why not stagger the holes on each disc so when they are assembled they make a helical path through the discs for the exhaust. If you do this I think you can take advantage of some of the surface area inside the walls of the holes and introduce turbulence that could increase friction between the discs.

[@LNRenan]

A hollow shaft with openings in the 2/3 farther the main exit and a centrifugal exit in the shaft to make a lower pressure in the center, It may help the flow but not sure about air viscosity inside the shaft.

[@tinklanjscek2700]

Good luck keeping the vibrations down...

[@sugarbooty]

@@tinklanjscek2700 if they are balanced per disk there will be no problem

[@tinklanjscek2700]

@@sugarbooty I think you're right, and I misunderstood the suggestion originally.

[@CharlieSolis]

@@sugarbooty Tesla has a special balancing apparatus patent for this, patent 186,799. He also has an improved disc stack construction patent GB 186,082 that he patented 10 years later after the first patent that does away with these difficulties and makes it so the turbine doesn’t need to be balanced 1 disc at a time.

[@swankscabinet1625]

I love this project bro! I think your doing a great job on improving this design bit by bit. Keep up the good work!

[@cavey773]

Name it after the French Archduchess Marie "Antoinette" (meaning beyond praise or highly praiseworthy) or "An-toy-Net"

[@integza]

Hi @Fred Kuhlmann! You might win a 3D printer! Can you send me your info (address, zip code, name, phone number) to [e-mail]?

[@pmgodfrey]

10:53 Man...I quit smoking seven weeks ago after 32 years. Halfway through the video and I'm licking my lips.

[@integza]

Stay strong my dude!

[@ericlotze7724]

less smoking = more money for dicking around with 3d printers!

[@ericlotze7724]

Seriously though, the mental triggers are hell. Drug can be LONG gone from your system, but an image, or place, or activity and.....

[@jacobkiser4661]

If you need to, take a nap it will curve the want and need. I know it's not accepted by most of people but it helps get it off your mind. Don't smoke bro my lung collapsed last October, how did you quit?

[@pmgodfrey]

@@jacobkiser4661 -- Nicotine patches. The first 5-1/2 weeks were pretty hard. The association with coffee and beer was painful. It's a lot easier now. I started out with 21mg transdermal patches and by the third week, I had to increase it by 10.5mg. Did that for about three weeks or so then went back to 21mg. I'll continue that for six weeks then go to 14mg for two weeks, then 7mg for two weeks. I've quit before for shot periods of time. Never go "hey, one cigarette won't hurt", because you'll be smoking again in a few days. I miss it sometimes because it was part of my routine. Habits are difficult to break, but I'll get through it. I can breath easier and I don't suffer as much from obstructive sleep apnea, so I'm already seeing positive signs. Good luck! Don't get sick amid this covid-19 crisis.

[@ickesra]

Are we just gonna ignore the epic rap that explains pressure and cyclones? Well done sir

[@MrAvian]

Loved the video Name Her Nia

[@Gameguru01122]

Simple and Sweet I like it dude

[@meeplol4173]

it’s 4 am and i just watched an Italian guy make a tesla turbine and then rap about the ozone layer. WTF am i doing with my life

[@100GTAGUY]

Meep Lol I honestly can't tell if he's Italian, French, or Russian.

[@inz1]

Little tip, if you clamp a straight edge, or piece of straight timber, to your table saw, you can run your work piece along it to cut straighter lines.

[@WendysAnime]

Finally, Another video from you! Epic

[@SteveWalden73]

Greetings from Colorado Springs, Tesla's home for 10 years!

[@Nicer_Splicer]

That flow was dope!

[@leonschmitt9380]

Informative Video👍🏻. Name it ResiN4tor. N4, because it is the Anet N4.

[@Damicske]

@Integza: please use gloves and safety glasses when you're handling resin and the parts, that stuff is dangerous. For the record I've got a large FDM (HEVO 290x290x750mm) and a small sla Nova3d elfin) printer myself and the Elfin prints are very good if you don't forget to add resin in the middle of the print.

[@itmandar]

Everything tesla gets a like, always.

[@Beeks81]

Me: "My comment was in a video!" Me right after: "You typed way too much."

[@Lucas-gs7sk]

Using a vape instead would probably be more wise for the future.

[@maxk4324]

fun fact vapes and smoke machines operate essentially identically, just a matter of scale (ie vaporization of propylene glycol using resistive heating elements).

[@juststeve5542]

@@maxk4324 yup, except it's the glycerine that makes the visible "smoke", the PG just gives the throat "hit".

[@frankweiler7121]

What a stupid name for a printer

[@GaisaSanktejo]

@@maxk4324 As Steve mentioned, forget the propylene glycol, stick with vegetable glycerine, its clean, doesn't have any potential negatives and produces a vapor that if flavored with natural flavors, smells like candyfloss :D

[@computerjohn1973]

Vape would be better. Pure VG will give you the most vapor production. This is coming from someone that has been vaping for over 5 years and makes his own e-liquid. I love those that chime in that vape is still unknown on long them affects, but are the same people that will take medication without questioning its side affects. Vaping has been around for a long time now. You know when it was hard and you had to know what you were doing instead of using a piece of crap Juul.

[@tgiorgetti1]

Hi. I am a Nikola Tesla fan, and in my bachelor's grad in mechanical engineering I build a Tesla Turbine, made by hard drive discs, and a boiler to produce 1MPa of saturated steam.. we also coppling a small generator to mensure the efficiency.. if you want, I can show you the results.. this is a very interesting device.

[@alienbeef0421]

Dude finally has a sponsor :D

[@haydengoff2313]

Name it Nicola, in honor of its first project.

[@W711-t7x]

How about Tesla? Ohh wait...

[@Nainogero]

In 200 years people will forget about nikola tesla (no offense intended) and be like “Alright class today we are learning all the wonders of this awesome inventor integza....”

[@bigsteve6729]

Erm you need to read up on Tesla he's literally responsible in one way or another for every piece of tech you use today.

[@theonecommenter]

Isn’t this how a turbo on some cars works

[@brandonwebb9967]

So... they stole teslas idea then.... shame -_-

[@davidregal6831]

Turbines used in internal combustion engines {and as a pump design in general) have a similar shape to the volute pump. Tesla seemed to be more focused on the specific implications of the internals he designed to work with the volute casing. Most exhaust driven turbos/turbines have something similar to the volute casing with standard bladed propellers but that's essentially the main similarity.

[@monjier]

@@davidregal6831 the real question is will i build more boost using a Tesla turbine instead of a traditional turbine?

[@ledocteur7701]

@@monjier a tesla turbine can build a insane amount of RPM, have 97% efficiency and as less turbulence issue but have a very poor torque, I don't know exactly what is the objectif of a turbo, if couple with a rocket style nozzle theoretically it can be extremely powerful but it need real testing to be proved

[@ledocteur7701]

@@monjier it also depend on material of the disks, more rough the material is more contact can be made with the gas and more propulsion and torque the actual best can be carbon nanotube, it's extremely rough (at a nanometric scale), it's extremely light and it's resistant as heck but it's clearly not for homemade propeller (for obvious reason) so the best in realistic case can be to make the disk catchy and rough manually (or with a machine), basically scratching to death all the disks.

[@julianreid9934]

Anet - "Gentlemen, from this day forward, you shall all refer to me by the name, Betty..." :-)

[@Asgar1205]

Looking back at this video, I think the new casing might not be the problem, but the convergent divergent nozzle, since it has to be perfectly sized to actually work, if your air flow doesn’t reach Mach 1 at the critical cross-section or your air won’t be accelerated to super sonic speed but instead slow down again

[@danbhakta]

For a bit I thought I was watching PBS on a Sunday back in the 80s.

[@christiansantos7164]

I was using my wireless earbuds listening to this episode and heard “weed” instead of “wheat”. When he said grinding the weed I had to look at my phone to see what was going on here.

[@-danR]

Same with headphones. Probably the same with anything; that's how his pronunciation works.

[@bigsteve6729]

Yeah whatever guys we know what you were doing instead of watching the video 😂

[@rolandoraqueno8511]

If you want to be informed , educated and someone to make your day watch this guy. Ha ha ha ha ha ha ha ha ha !!!

[@everydayupholsteryreuphols8192]

If the disc surface is smooth efficiency will be low, try a slightly textured surface.

[@UncopyrightableMuzik]

If a textured surface, would provide more friction, then why does a textured golf ball go further than a smooth one?

[@crimsonconductor2235]

UncopyrightableMuzik most of human knowledge at your fingertips and you ask your question here. The dimples on a golf ball reduces its turbulent wake, allowing the golf ball to have less drag than a smooth ball. If you had used your brain and 15 seconds you would have the same answer as I by simply typing: why does a golf ball have dimples?

[@aneilramadheen4716]

Big brains

[@JasonJrake]

The whole advantage of Tesla’s turbine design is that rather than collision molecules, it uses the attraction between them to pull the discs parallel to the propellant. The way to improve efficiency then, is to make the discs thinner, smoother, and closer together. Different gasses and liquids, and disc materials can be tried as well.

[@UncopyrightableMuzik]

@@crimsonconductor2235 lol, triggered.

[@briangates4471]

Demonstrate air flow by shortening lifespan, well done Name her: Anet-to-Print (I need to print)

[@oliputnik]

The Serb Nikola Tesla is a genious since 140 year and he will be the best in the next 140 years. He is a gift for the mankind. God bless him. Thank you for good video.

[@thevinstigator2511]

I feel like a good Tesla turbine would use hard-drive disk platters and air bearings

[@samoneill4750]

I think they would be too smooth. The whole point is to get something that grabs the air and has a high friction coefficient

[@thevinstigator2511]

@@samoneill4750 then we shall rough them up with 600 grit sandpaper, but yes, flat and thin allthough

[@CharlieSolis]

@@samoneill4750 you want smooth. Boundary layer drag is not from Mechanical Interactions between the fluid and the disc. Adding grooves will introduce turbulent losses which will reduce the efficiency and can induce stream separation, and even flow reversal, counteracting the desired torque, because of the turbulent flow regime it would induce. The Tesla turbine works on adhesion from viscous forces, which are entire valance electron shell interactions. Think hydrophobic and hydroPHILLIC interactions. Making the surfaces of the discs hydroPHILLIC would increase the molecular adhesion of water and steam molecules increasing the boundary layer thickness. Putting mechanical impediments in the way of the free flow motive fluid completely defeats the purpose of the turbine in the first place. You want smooth faced discs. The “wetting angle” between the Type of material the discs are made of and the type of motive fluid is the important factor here.

[@CharlieSolis]

@@thevinstigator2511 don’t do that. You want smooth faces discs. My last comment explains why you don’t want rough faces discs.

[@Dazwell]

Name her Marie AntoineAnet :)

[@integza]

Love that one !

[@integza]

Hi DJ Dazwell! You might win a 3D printer! Can you send me your info (address, zip code, name, phone number) to [e-mail]?

[@Anonimus217]

I've came here after Tom Stanton's eject of the Tesla turbine solution, which I'm in love. I'll try to make some money to prove he is so wrong thinking that the Tesla turbine is not an option, cuz it is! But first of all we have to read 3 times per day, at least 1 week the Tesla's patent for a better understanding of the calculations that have to be made in such a simple and natural arrangement as his turbine/pump. PS. I really need that 3D printer :D!!!

[@jrazzarelli]

Name her “Annette Funnyjello”. You know, that goo in the printer is like a funny jello. Maybe only boomers will understand. Great work!

[@albertoalvarez8986]

Hey Integza, your videos are amazing! It is enjoyable to watch you go through the steps of design to ultimately get a mechanism or part that does what you'd like it to all while explaining exactly what is working (and isn't). The use of graphics also works well to this point. Love your content!

[@Scoobystyle]

I know I am late to your channel, but I am loving it! Genuinely in my top 10. I also feel sure you will never read this but I have to try! I wish I lived near you, I am a finished carpenter loaded with a treasure trove of tools to do so. Not bragging, I would do any and all of your carpenter jobs free just to have access to your printers, laser cutters and your knowledge! I don't have the money to buy your tools, I like to barter, trade my knowledge, tools and experience of woodworking. I have old knowledge and tools, you have the new knowledge and tools. Anyway thank you for your knowledge and inspiration!

[@macestillmace2514]

I'm new to your channel, but once you broke out into rap, I feel obligated to go through all your videos and give you a like.

[@Eptarky]

If i understood well the differences in the new design and the normal design that you made, the former has a "de laval" nozzle (i. e. Convergent divergent nozzle) mounted in the better tesla design. I'll say that the main reason why you lose all those RPMs isn't the tesla design but that you used that nozzle. I want to give you some tips(if i'm right about the first design) , i think the problem with that turbine started in the moment you sad "with all the theory out of the way". First of all that nozzle is efficient only if you reach supersonic speed otherwise is useless. At subsonic speed the divergent part will slow the fluid(that is probably why you lose all those RPMs). You don't want turbines to work with supersonic velocities, and almost certainly that design is not meant to work with supersonic speeds. So i suggest you to try the new tesla design with the the normal nozzle, and if you want to compare the results the entry surfaces of the casings MUST be the same. If this isn't the cases than it is only strange that the better tesla design failed.

[@giovannottodarienzo743]

I think that tath could be a good idea. But i can sugest also to remove the central part of the discs, just to have a good comparison. I would also sugest to sandpaper the discs and use fins along it to direct the flow and not make it collide in the center. These fins can also be not paralel to the flow to make like an ibrid whit the conventional turbine and maibe get a higher torque output. These fins can also replace the spacers and help you to keep the discs stable also when they are a bit flexible because they are distributed around the surface, not only at the center. I think you have to reduce the whidt to increase the air speed in the inlet and increase, not too much, the diameter of the turbine to increase the leverage. In conclusion, to increase the performance the discs thickness is less important than the tickness of the space between them Hope that someone read this (hope also my english was good)

[@demonsluger]

the tesla turbine is designed to peak at 50k rpm

[@tubanbodyslammer9125]

I love how you say patron

[@pablomahe1284]

How about "Resintegza" ?

[@Luziferne]

Name her: A-nette which, in Viennese Slang, means a nice, cute or pretty one

[@3dprintingguru378]

A-nette cures 😂

[@ArrKayCee]

"I don't have tablesaw, but I have table and saw, how hard could it be?" has the exact same vibe as "From the name of it, it's just a combination of guitar and electricity".

[@bowlseriw]

Haha

[@dhfr89]

New printer name: Mr. E. Goo ("mystery goo" )

[@epicab2456]

13:00 ..... WAIT hold up!!! D:, i didn't even realized it was a advertisement ......... Fine i will download it im in ._.

[@HotaruTomoe]

I did the same mod for my saw too. It's actually quite clever.

[@riccello]

Dude, love the accent and the enthusiasm lol

[@Bricksauce_Engineering]

You should name the new printer "Grimes" since you know... The other one is Elon. Keep up the great videos!

[@rmax5150]

I love the improvised table saw. Well done sir!😎

[@_SiriusM_]

015W lol I'm afraid to imagine how many watts you spent on pumping air

[@poyen_tseng]

"I have a table～" "I have a saw !" "Uh!!" "Table saw !!!"

[@ChronicEnnui]

Hahaha i get it

[@charles-ih7zp]

Really smart guy thinks outside the box very well.

[@senorcapitandiogenes2068]

Now you just need a metal 3D printer next. COMPLETE THE TRINITY!!

[@integza]

I'll knock in some doors ahahah

[@-_IT_-]

I was wondering when you were going to make another video.

[@stacia783]

i love your flamboyant attitude, its so welcoming. Keep frosty bro!

[@mriversen5097]

Call the new gal ResiAnetta. She will fit right in with the others.

[@InnoCreeper]

Call it Armstrong because it reminds me of a spaceship. XD

[@GateKeeper_Official]

Your ingenuity is inspiring man, thank you for all your videos, Nikola would be proud!

[@klausstock8020]

Integza: proud owner of the world's crappiest table saw. Everybody else: makes funny comments, but doesn't even own a bowtie.

[@samuelallanviolin752]

Then by definition he must also be the owner of the greatest table saw

[@ElDocThor]

Youre the man!!

[@Sniperboy5551]

The cigarette really brings out the inner Tesla of this project.

[@lieblingsfarbe4453]

Most underrated Channel on KZbin... and name the Printer Achmet XD