iPad Mini 3 Screen Replacement - Full Tutorial

[@TylerLeeWarren]

I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzbin.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.

[@masterdomhowie871]

I didn't see how you reinstalled the magnet's. Did you glue them back down or something?

[@flexasap988]

can you still use the ipad without the screen??

[@UbergeeksBiz]

No. The screen is your touch digitizer screen.

[@flexasap988]

@@UbergeeksBiz but can you still use the ipad without the digitizer screen?

[@MACKTOP666]

the digitizer it what make you able too use your finger on the screen with out that no tactile

[@MonkeysBoby]

Hey! I'm wondering what did you use to keep in place the screen at the end? Tap/Glue?

[@UbergeeksBiz]

Tape

[@50bent7]

Is the tape better than B7000?

[@alhammohamed7101]

What about the magnets?

[@brockdiamond]

What kind of tape (the white tape)did you use to put over the sensor on the back of the digitizer? It didn’t look like the tape you linked to.

[@jamaledwards4443]

I think this is a little more than just a *screen replacement*

[@TheVitalij24]

Cn you tell please what glue you youse in the end for screen?

[@UbergeeksBiz]

Hi, we use this: Adhesive Red Tape - amzn.to/2CGZsu3

[@ErikSandell-t4e]

What if it dosen`t boot just give You a 3 redbar and 1 whitebar from left to rigth? What to do then?

[@xbox360benji]

Is it possible to buy the magnets ? I dont have them.

[@Guest75899O]

my screen and home button have been broken since july 2020. how do i replace home button

[@UbergeeksBiz]

Best is to keep the original home button and transfer to new screen.

[@Guest75899O]

@@UbergeeksBiz hi so 95 percent of the digitizer doesnt work anymore and im not even 18 years old or whatever the age is to buy things legally in USA to buy any replacement parts im a minor how do i get the parts for the ipad i mean i dont use the ipad mini 3 anymore it just has data and pictures and minecraft worlds from when i was 7 years old and i tried to transfer data over but i cant because the screen doesnt really respond to touch anymore and yeah its even more broken now the digitizer is coming out and the home button fell out i mean the home ubtton hajsnt worked for 3 years so thats ok ig but idk my parents dont care about it anymore because i have better things now and yeah idk

[@c00lkidroblox62]

My iPad mini 3 has a wide crack but I don’t have tools for it

[@UbergeeksBiz]

Please check the description links. Has tools and screen replacement where you can buy

[@MrSnogz]

Im confused. Is the glass the digitiser or is the black part below the glass the digitiser????? reason I'm asking is because mine is damaged and I'm seeing a white screen with black lines down the middle but the glass is not cracked. Im wondering if i need to purchase the screen replacement you put as the amazon link to do my repair or do i need to get additional parts??? As i said the glass isn't broken and the screen is powering on but all i see is a white background with black lines down the middle as if the iPad screen got squeezed or something. let me know what you recommend

[@UbergeeksBiz]

You have a bad LCD screen: Here is the LCD screen link: amzn.to/2RrbT6J

[@UbergeeksBiz]

However, to replace the LCD screen, you need to open the glass. Although your glass is not cracked, you might want to buy additional glass just in case. If you can open the glass without cracking it, then replace the LCD and reuse the original glass.

[@MrSnogz]

Thanks

[@S.khan.123]

Is it support apple pencil?

[@UbergeeksBiz]

no

[@KHSxDAVIDHERNANDEZ]

Hey I copied exactly what you did and everything came out great besides the home button working what can be the issue?

[@UbergeeksBiz]

The home button is stand alone connection to logic board. Make sure the ribbon cable is pushed in all the way and clipped on tight. *Note-Ribbon cable has the white line on top, you must make sure it is all the way in. Did you damage the original home button cable ?

[@Maxmax-cr9sq]

How do I know if my lcd is broken?

[@UbergeeksBiz]

If LCD is broken, you will get pixelated screen. It will be obvious knowing LCD is broken.

[@Maxmax-cr9sq]

Thanks 👍

[@luna-mk5sg]

what if the digitizer is broken as well, do I get a new one?

[@UbergeeksBiz]

yes. unfortunately.

[@metanimal7]

and the magnets???

[@UbergeeksBiz]

Oppss

[@jeancarlorivera3128]

the goggles for safety LOL

[@UbergeeksBiz]

Safety first !

[@ericmendez5815]

That screen separates and some shards of glass hit you in the eye you’re gonna hope to have some eye weather

[@tvshow7566]

Hi UberGeeks pls tell me will ipad mini 3 work with ipad mini 1 lcd ?

[@UbergeeksBiz]

No. It will not work. Here is iPad Mini 3 LCD screen: amzn.to/2wsMQAU

[@nismoSR20defuzzy]

Any reason why iPad won't switch on? I followed step by step

[@hareeshch]

may be back light is dead

[@UbergeeksBiz]

Try disconnect the battery and reconnect back

[@kevintuhy5470]

Hi I followed all of the directions and the screen won't turn on now. HELP!

[@helooo6.040]

Kevin Tuhy it’s broken happen to me

[@dannyboyy31]

Don't do what I did, and get all the way to the end, only to crimp the home button cable under the bottom-right corner of the screen. Now the home button doesn't work so I've had to order a replacement, and no more Touch ID :(

[@UbergeeksBiz]

I'm sorry to hear about that.

[@chaleeher1992]

Don't even show how to put adhesive back on plus the magnet.......

[@UbergeeksBiz]

Just do a reverse process....

[@TravisNRG]

Man....the digi screen doesnt work at all. Why wont the touch touch screen work now?

[@helooo6.040]

Travis Bedard happen to me never trust ebay

[@MartyScoresEasy]

Turn up the music!

[@ayazghulamali3593]

Music is too loud, should have a soft music

[@UbergeeksBiz]

Will do on next video. Thanks

[@718Kipkila]

I hate the music.

[@ulflyer39]

So what happened to the Magnets you said we would come back to? Answer my question and I might just subscribe.

[@hiZePAH]

Thanks! (Be careful.. battery was plugged in the entire process) ;)

[@UbergeeksBiz]

Thanks for the tip!

[@palmtree5544]

Nice video. Terrible music. No music would have been better.

[@qihua0817]

Lcd become dirty!

[@UbergeeksBiz]

wear gloves

[@roberthusk3402]

Can he not say magnets? Lol

[@UbergeeksBiz]

Lol.... I'll take that as compliment

[@martinweber3112]

nice video, but don´t call it full tutorial!!!

[@UbergeeksBiz]

thank you

[@SRTMustangKiller]

Dawg… dem beatz in da backgroundz be sickz. Seriously, it’s stupid, annoying and adds zero value to the video!

[@soemoeaung2497]

😬😬😬

[@UbergeeksBiz]

:)

[@tookallyourmoney]

What if you have a screen with a touch ID but the tablet 1 or 2 does not use it.

[@UbergeeksBiz]

You still need to have the home button replace