How To Remove Door Panel 2005 Silverado | 99-06 Silverado GMC Sierra

Thank you for watching!
Please leave any video recommendations below!
Music Credits
Track: Defqwop - Awakening [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Defqwop - Awakening | ...
Free Download / Stream: ncs.io/AwakeningYO

[@pigweed000]

Perfectly planned and executed instructional video. It sure saved me a lot of time and frustration!

[@dominique___1980]

Right from the jump.. 1st step… mine does not have that screw or cover. Who else hates auto manufacturers who make every model different?

[@fourfortyroadrunner6701]

THIS IS the best video I've seen. I'm 75 and DETEST all the different connector latches, especially such as down on the transmission in the mud / oil/ junk and you cannot SEE them to figure out how to release them. THANKS again!!!

[@21FEEZY]

Hands down the best video ever created for the Chevy 00-06 door panel removal. I'm replacing the window control switch this video helped me knock it out of the park. Reading the comments helps alot people leave great tips in the comments.👍

[@MaxF01]

Thank you very much im glad the video was helpful!! 🙏🏼 i agree the comments are always a goldmine of information

[@williammcdonald9037]

All came out as shown. Thanks for great video. I little tricky to see the connectors until I got that larger one off. But the demo on the hinged clip helped a lot.

[@MaxF01]

Glad it helped!

[@chriserickson4417]

Thank you for the info, as it will be very helpful when I get to the disassembly.

[@kerryd25]

Watching you do this stuff gave me the courage to do it too! I fixed an HVAC issue on my '04 Dodge Ram!! Thanks Max!! : )

[@MaxF01]

That makes me so happy Kerry and thats so awesome that you fixed it!! 😁💪🏼

[@foundwanting1]

Thank you for sharing. I didn’t go as far as you did. But your tutorial helped me.

[@MaxF01]

No problem im glad to hear!

[@whatatool]

Thanks. Helped me get that panel off lickety split....without breaking anything!

[@MaxF01]

No problem! Im glad to hear!!

[@Justforalaugh]

Great video straight to the point and accurate.

[@MaxF01]

Thank you!

[@LKN4WAR]

Great info. Thanks for the video. Window motor and or regulator issues.

[@josemoreno3334]

Thanks Max. You made it easy for me . I had to repair the arm rest .Those wire's were a bit of a problem , But I got the job done., Thanks again Max.

[@MaxF01]

Im glad to hear you got it done and no problem!! 😁

[@luthersmith4827]

Very good detailed video! Thanks!

[@MaxF01]

Thank you! No problem!

[@SilverGorilla1776]

Great video! Thanks so much.

[@MaxF01]

Thank you very much im glad you liked it!

[@sbass301]

You might want to mention that with that last large connector with the swing arms, there is a little button behind the top that holds it in place. That is... when it's all in one piece and not broken like yours. Because I didn't know about it, I forced mine and now it's broken too. 😢

[@javiergonzalezs5993]

thank you so much i was struggling so much not beig able to disconnect it

[@dogrulzes4392]

Instead of removing the wire from the light socket in the door panel. I twisted the whole socket and removed the whole assembly. It was easier than unclipping that wire.

[@MaxF01]

Good point! Thanks for sharing the tip

[@kevinsaulnier7519]

I watched your & another video. When removing the window/lock/mirror switch assy, there is a clip on the rear, bit a screw holding it in on the front. That the door panel needs to be removed first.

[@lilfr4nkie]

Thanks

[@davidbeustring5152]

How do you remove the power switch panel on the Silverado door?

[@dennisstuhr9201]

Thank you very helpful

[@MaxF01]

No problem!

[@adriancasanova2963]

Thank’s you did it very easy. Gracias amigo.

[@MaxF01]

@@adriancasanova2963 de nada amigo 👍🏼

[@dirkkrex5303]

Excellent. Great video.

[@MaxF01]

Thank you!

[@edaistrop8626]

Can you sho how to take the door speaker out while you have the door panel off

[@ihavethedocuments2580]

If it can be assembled, it can be disassembled apart. Good video Subscribed 👍

[@MaxF01]

Thank you!

[@robertbrunston5406]

Good video! Thanks Man.

[@MaxF01]

Thank you no problem!

[@mozzzietv8307]

Is the the storage space where you can put papers, pens, or even trash on the door panel removable?

[@Randomvids-ud1my]

Yes, there’s a screw on the bottom, then you have to push and finagle it out

[@mr.benz69]

For some reason after reinstalling the panel none of my switches to the door or mirrors work now. I have no clue what the issue is and haven't read anything about it on the forums

[@nickaustinnoble]

Same! Did you ever figure it out??

[@michaelcraft242]

You do know that light on the left corner instead of unhooking the connector you could just turn it and take the bulb out with that and it’s way easier and faster. Also instead of the little cubby compartment coming off you could pry on the right side of the housing for light and pull to right and that is also easier and faster too.

[@jerrytaylor3883]

Like

[@BobCaseyAerial]

Well done Max

[@MaxF01]

Thank you Bob!!🙏🏼

[@thunderchild321]

Thanks even tho i manhandled dat little lever like thingamagiggy it came off..guess ya suppose to flip it back and forth

[@frankiehall2456]

i did this and now my door doesnt open

[@fishn365]

Love ur videos, but, when I saw you with that paint scrapper in your hand, I cringed!🤣 Max, get a set of trim removal tools. Heck I'll gift you a set!!!

[@MaxF01]

Haha dont worry im going to order some!! 😂 thanks a lot man I appreciate it🙏🏼😁

[@fishn365]

@@MaxF01 😂 Honestly, if it wasn't for my son, and my neighbor, I would still be using putty knives and screwdrivers. I think I irritated them both to the point they forced me to get a set!

[@MaxF01]

@@fishn365 haha its one of those things where its like, well this can get the job done, but im sure they make it a lot easier and are better for the interior to not scratch it and such

[@fishn365]

@@MaxF01 absolutely. My son does installs on emergency vehicles as a second job. Was doing that before starting his career in law enforcement, following in my footsteps. Between him, and my neighbor, who is also a retired LEO, and who knows how to fix pretty much anything, collectively we have probably every tool 😄

[@MaxF01]

@@fishn365 thats awesome!! Having the right tools can make a world of difference!! And thats awesome that you and your son were LEOs, respect and thanks to you guys🙏🏼 my dad is also retired LEO.

[@ArrowStudios]

Damn, i cant get the switch unit out to replace it...

[@LongIslandP8ntball]

I have a 04 sierra crew cab I have some repair videos too if ya wanna check out. I love my 04....new trucks sux lol

[@TresXTre]

Bolt is a 7mm also

[@genroc2005]

My 2000 model the screws were in a different place

[@erichernandez6156]

Before seen video got frustrated and pulled it out all because I missed the one behind the lock 😮

[@tomo4584]

Nothing to do with this video but could you make a tutorial on how to make a join or die flag?

[@MaxF01]

I think i could do that, im trying to figure out how to go about it and if i can figure something out I’ll definitely make it!!

[@tomo4584]

@@MaxF01 one thing I’ve thought about is printing each part of the snake on paper and laying it out like a big stencil.

[@MaxF01]

@@tomo4584 hey thats actually what im planning on doing! I already got it printed out and it looks like it should work great, also i was trying to figure out how to go about putting the snake on, like if i should carve it and then paint it or burn it but i think im just going to stain the background black and then carve out the snake

[@tomo4584]

@@MaxF01 I think carving it out would be better

[@TresXTre]

T20 torx*

[@tyhnbgtyhnbgt]

Dude, you sound like DAX, who's married to Kristen Bell

[@joshuakorson9641]

You're the man Max!!

[@MaxF01]

Thank you Joshua!