Is This The Best FINISHER For Custom Sneakers?

Here's my review of the NEW Angelus 4-COAT.
Want to try it out? Snag some here!
➢bit.ly/3y87Kpv
Our Sneaker Stencils!
➢ etsy.me/3QE5Ghx
Angelus Paint Supplies! (Support the channel with our LINK)
➢angelusdirect....
Contact Me!
➢ [e-mail]
➢ [phone]
4-COAT is a brand new scratch resistant urethane clear coat that is available in 4 finishes.
About 4-COAT
Shake well before use. If there are bubbles present, please let them settle before use. Do not apply excessively, or rub for a long period of time. Not to be used on nappy leathers, or suede. Multiple layers of this product can be applied (we recommend 2-3 layers) with a brush, or an airbrush. You must allow 24 hours for this to dry (in humid climates, this may take longer.)
This product is not used with Finisher, this is used in place of it as it has better wear resistance and durability since this is a urethane based top coat. The sheen is also much stronger on all 4 top coats.
From least shine to most shine;
FLAT- No shine at all. Completely dull.
MATTE- Contains a little shine to it.
SATIN- This is closest to a new shoe finish. Will have a "haze" look to it.
HIGH GLOSS- As close you can get to a "patent" look. However may vary on what it is being applied to.
Materials we use!
Table top Airbrush Booth
➢ amzn.to/3z8ggJX
The BEST Airbrush
➢amzn.to/39M9gCQ
The Brushes we use
➢amzn.to/2H3bdxD
My Favorite Vinyl
➢amzn.to/4gg51Qj
Detail Sander
➢amzn.to/2DXEUgx
Sandpaper Pack
➢amzn.to/2VUebLS
Preferred Tape
➢amzn.to/3aBg0C3
Scotch-Brite Pads
➢amzn.to/2VOE2Vz
My Favorite Finisher (Matte 4-Coat)
➢amzn.to/3sPplkh
Silhouette Cameo (Stencil Cutter)
➢amzn.to/3z8ggJX
***********************************************************************
Welcome to the DCF KZbin channel! Our goal is to create a community around custom sneakers. We want to provide this community custom sneaker tutorials, sneaker photography tips and tricks, custom sneaker discussions, and overall providing a real value to fellow sneaker customizers. We hope by watching our videos, you're able to learn something and improve!
Dillon & Jason
#angeluspaint #customshoes #angelustutorials

[@djolly1231]

I have the new 4 Coat Flat finisher and it is great. I used it on Hornets pair I just fished up and was extremely happy with the results.

[@DeJesusCustomFootwear]

Pumped to hear that!

[@paolocardinali3951]

I just finished using it on my Lunar Force and the results are amazing! This stuff is gold!

[@funkaricustoms]

I can just constantly watch you, non stop. You're doing a great job. I customize stuff as well, and would love it if you ever give my work a review. In my country OGs are hardly available, neither can we easily get our hands on the standard leather paint like Angelus or Alpha 6, even air brushes are hard to obtain. A cricut stancil printer is a bit of a luxury, yet I have tried to solve all those problems and been customizing for past 4 years in my limited means, finding lowkey solutions to them. Wish to meet you someday man. have a good one.

[@DeJesusCustomFootwear]

Thank you for the very kind words! Much appreciated man. Glad you've enjoyed the videos

[@funkaricustoms]

@@DeJesusCustomFootwear more power to you ☺

[@99problemstoysaint1]

My personal go to is Raleigh Restorations scratch resistant sealer. This stuff is just amazing.

[@patricklary81]

I can't find any for sale. It's like they went out of business. I found 1 site that had 9 1oz containers left, but nothing else. Website is gone and links to social media as well.

[@AthleticAestheticPod]

Hey bro thank you for this review! Super helpful and love the honesty you provide while being sponsored. 👊

[@DeJesusCustomFootwear]

Thank you man! Authenticity is huge!

[@weirdartsociety]

Had to come back to this video. I’m a avid fan of liquid kicks matte finish but like you mentioned towards the end it’s not available but Angelus 4 coat is. I feel confident in this product after re-watching this. Going to pick up today. Thanks- Weird Art Society

[@RonGotSole]

A Saturday upload!!! I'm here for it 🙌🏾

[@DeJesusCustomFootwear]

Ayyyyyyyy!! Gotta keep you on your toes 👀🤙🏽😂

[@worldofwiz]

Finally tried it… looks good

[@mannyrivera1545]

This makes me happy!! I've been using Liquid Kicks, and it's good to see Angelus step up their game! And you can tell the difference more in the high gloss finishers. The matte finishers are definitely comparable.

[@DeJesusCustomFootwear]

Big time! Well said

[@robmills2155]

@@DeJesusCustomFootwear Hey Dillon..do you still require the duller if you use the matte 4 coat? Loving your vids from Australia 🔥

[@DeJesusCustomFootwear]

@@robmills2155 nope! I talk about why in the video as well

[@robmills2155]

@@DeJesusCustomFootwear Bro..that’s twice I have asked something from the other side of the world..and you reply with an hour..that is insane professionalism and you deserve every kudos for what you continue to achieve

[@weirdartsociety]

It took a while but you finally talked me into purchasing duller. Around the same time I discovered liquid kicks. I say that to say I still have bottles of duller that I’ve never touched and never wheel. Beforehand I used Angelus matte finish along with Krylon Matt finish spray. Kinda glad I missed the duller wave.

[@DeJesusCustomFootwear]

Haha I’m very glad we no longer need to take that extra step!

[@ignisnatreoficial]

Finally something that works. I bought the old Matte finishing and it was really disappointing since it was a duller needed to get the Matte finishing wished. Let's try this. Also, I'm interested of using some spray finishing use in some custom shoes on KZbin.

[@DeJesusCustomFootwear]

This will get you right!

[@maacsdead]

your a god for still responding to comments 2 years later, earned a sub for engaging! i have a question regarding your opinion when it comes to me doing a jordan 1 bred project. should i go for the matte coat on the black for the most authentic looking breds? also would u also only do 2 layers of top coat using a paint brush or should i only do more than 2 considering a air brush can spread the coats more evenly?

[@DeJesusCustomFootwear]

Yeah matte gives it the most factory look imo. 2 coats does the jov

[@michaelcain2174]

As much as I love angelus paints their finishers aren’t the best , liquid kicks matte is still king , I turned to liquid kicks thanks to your videos and love it

[@DeJesusCustomFootwear]

Agreed! Their old finisher definitly was lacking, but good for them they got back in the lab and this new one is a massive upgrade. But totally agree on LK it’s a great finisher

[@judithwatson4828]

Whoa! That new matte by Angelus is 🔥🔥🔥🔥

[@DeJesusCustomFootwear]

Sooo good!

[@JorgeGtz509]

Sheeeesh

[@hiradrikhtechi8006]

I truly appreciate you sharing all info and tips! I would like to use the 4 coat on tooled leather wallet i made, so my question is that can i oil my wallet after using this product? Or it mask the leather the way oil cant be absorbed ! ? Since its vegetable tanned leather it tends to dry up and needs to be waxed or oil every now and then ! It would be so kind of you to help me on this 🙏🏼🙌🏻

[@DeJesusCustomFootwear]

I wouldn’t be speaking from experience unfortunately. But on a near microscopic level you could think of the 4coat almost like a thin film layer on top of the artwork. So I’m not sure how that would impact the way the oils absorbed , but I imagine it would somehow

[@kingstoeck]

I chose the angelus matte coat actually applying it for the first time as we speak! Fingers crossed hahah how many coats do you apply?

[@DeJesusCustomFootwear]

2

[@kingstoeck]

@@DeJesusCustomFootwear thanks bro. I just finished applying the 1st, seems a little streaky. Do you recommend a dry time before 2nd coat, if so how long?

[@DeJesusCustomFootwear]

@@kingstoeck 20 mins

[@RdzArte]

Great video, man ! 🎨

[@BSHOWChannel]

Nice tutorial, thank you! How ever I used 4-coat, it has turned white. How can I solve this problem? Or what do you think about using 2-thin to dilute it?

[@DeJesusCustomFootwear]

A couple things are coming to mind for what may have went wrong. Perhaps not shaking it enough beforehand or applying too much. You can likely get the finisher off with a glue and residue eraser without damaging the paint

[@BSHOWChannel]

@@DeJesusCustomFootwear Thank you very much for answer! I see. I'll try and work it🙌

[@caileymcdaniels]

Great review! But what do you use to clean your airbrush after using 4-coat since it’s a urethane clear coat? I’m assuming a regular cleaner won’t work since 4-coat isn’t water-based.

[@DeJesusCustomFootwear]

I’ve just used the angelus airbrush cleaner with it and haven’t had any issues !

[@brianschlitter5934]

Having an issue with the matte finish not spraying in my airbrush. I cleaned my airbrush very well before hand.

[@DeJesusCustomFootwear]

What type of airbrush ?

[@brianschlitter5934]

Autolock METU-30S. It’s just a battery powered one I got on Amazon. I haven’t had any issues with it before until tonight.

[@DeJesusCustomFootwear]

@@brianschlitter5934 yeah to be honest those aren’t gunan be made to handle something slighty thicker like the 4coat. I use the badger patriot 105, and never swap it from paint to finisher without issue

[@brianschlitter5934]

@@DeJesusCustomFootwear appreciate the feedback. I may just brush on the 4 coat ones then. Just have to be careful brushing because it seems to want to pick up some of the underlying paint

[@BeTheGrinch]

Is it suitable for airbrush use? How to avoid clogging?

[@DeJesusCustomFootwear]

I use it with my airbrush daily. I have heard others not be able to use it quite as easily so they’ve had to add some 2thin

[@BeTheGrinch]

Thx a lot​@@DeJesusCustomFootwear

[@rahulgol1]

I was just wondering does this mean if I were to use these finishers I wouldn’t need to use the duller

[@DeJesusCustomFootwear]

Correct no duller needed

[@alberts1985]

Your videos are so helpful thank you

[@DeJesusCustomFootwear]

Thanks for watching!

[@jaycantcreate]

Can you use Matte finisher on canvas instead of water and dust repellent spray?tnx

[@DeJesusCustomFootwear]

Should be fine

[@AishatuMuhammad-l9f]

Nice one. But can it be used for leathe sole finishing?

[@jonathandavenport2500]

Would this work well with canvas shoes like high tops or similar Hash Bubbie shoes. My gf has drawn a bunch on with sharpies and I want to preserve the excellent drawings she has created as much as possible while still wearing and enjoying them on my feet.

[@DeJesusCustomFootwear]

Sharpie on canvas you don’t have to worry about cracking or chipping really. Just potentially smearing from moisture. I would say this would work or you can get away with a spray like a krylon matte finish

[@vikerofficial2420]

What’s the difference between the 4 coat matte vs the no. 620 matte ?? And can we wash it with any product or must use angelus foam?

[@DeJesusCustomFootwear]

4 coat is a newer urethane based product. As long as the product was prepped and painted correctly you can clean anyway

[@ItsmeCisco]

I finally found classic kswiss in white. I want to just keep them as clean as possible. Would you recommend this just to keep them clean?

[@Geo-Storm]

Can I apply this matte finish with a paint brush? I don’t have an airbrush or know how to use one 😭😭

[@DeJesusCustomFootwear]

I’ve heard some bad experiences applying with a brush unfortuantely, but you can try if you feel confident in your your brush skills!

[@herneldeguzman6652]

Do you still need to put 2 thin in airbrush if ur gonna apply this??

[@DeJesusCustomFootwear]

I don’t use any, but it depends on your airbrush setup

[@ShawnKur15]

I had an issue when brushing it on it kinda gums up. I shook it well and this was a brand new brush. For context im applying on synthetix leather boxing gloves.

[@DeJesusCustomFootwear]

It really is best if you can apply with an airbrush! Otherwise the only thing I can guess without seeing the application would be applying too much. You really don’t need a lot

[@mariabaptista9156]

i used the Flat 4-coat for the first time yesterday and it was so AMAZING

[@DeJesusCustomFootwear]

It’s soo good!

[@gameup6034]

For the finisher in the airbrush did you have to add 2- thin??

[@DeJesusCustomFootwear]

I don’t but many people have mentioned that they do

[@chazzrickthomas9972]

So if I use scratch resistant coat as the finish I don’t need the acrylic finisher do I

[@DeJesusCustomFootwear]

It really depends on the situation and product you’re using so I don’t want to give a blanket, yes. But in theory, correct you don’t need it

[@chazzrickthomas9972]

@@DeJesusCustomFootwear thanks I’m doing 2 pairs of air Jordan 1s so I wanted to be in the right direction of my design and paint process. it’s my first time doing a custom. Also I remember when you painted the tongue fabric you mixed in two soft as well

[@kingofboxing-cro]

Can i use finisher 1 or 2 days later, if i already paint them? Will that be a problem?

[@DeJesusCustomFootwear]

Nope not a problem

[@juansuarez185]

I recently painted a swoosh on a shoe and applied normal finisher and its way to glossy.so can i buy the 4 coat matte clear coat and just put it on top? Or do i have to acetone the area first and maybe repaint?

[@ltk-box-_u7013]

And is it better to not dry it with the heat gun??

[@DeJesusCustomFootwear]

Yeah air drying is best

[@emsx5739]

thank you am for this video! angelous says 2-3 coats and then dry for 24 hours? do you leave a set amount of time between each or?

[@DeJesusCustomFootwear]

At minumum I would recommend 30 minutes

[@emsx5739]

@@DeJesusCustomFootwear Thank you!

[@concretedesert455]

Can i use heatgun of each coats to make the process more faster?, thank you.

[@alayahooks6842]

does this work on midsole ?

[@DeJesusCustomFootwear]

You can apply it midsoles, but it won’t prevent them from cracking

[@IMPORTGUY15]

sometimes with darker colors I see the paint color on to the brush when using finisher, also smearing onto other lighter colors. Is there something I'm doing wrong? thanks great vid

[@gqbcustomkickz]

Thanks for the info homie 👊🏾❤

[@simonediamante7556]

When you use this finisher, you still have to mix duller on the paint or not?

[@DeJesusCustomFootwear]

Nope not anymore

[@simonediamante7556]

Thanks for the fast answer, keep going mate🖖

[@simonediamante7556]

@@DeJesusCustomFootwear sorry, another question since english it's nkt my first language..how many coats i have to apply?

[@DeJesusCustomFootwear]

@@simonediamante7556 2

[@silviorapela5981]

Hello Dilon, if finishing a project I realize that my FINISHER will not reach me. Can I mix a MATTE with a SATIN? Or mix a SATIN Acrylic finisher with a SATIN 4-COAT? Assuming it's not optimal, can I save the situation? Thank you

[@DeJesusCustomFootwear]

No I wouldn’t mix the diffferent finishers.. you can mix the sheens like matte 4coat and satin 4coat, but I wouldn’t do satin 4coat and satin finisher

[@nuncio21]

Thank you sir!

[@FernandoSanchez-zc7os]

i’m thinking about using this on the lost and founds to prevent bleeding when i wash them. will this work in preventing bleeding if i ever wanted to wash my sneakers?

[@DeJesusCustomFootwear]

I’m not quite sure it’ll work as you intend. I think you’d end up rubbing the finisher off

[@FernandoSanchez-zc7os]

@@DeJesusCustomFootwear does the finisher really come off that easily with water and soap? thanks for the quick reply!

[@SweKelt]

Can you apply the 4-coat matte with a brush? Do you have to be super careful and put a very thin layer?

[@DeJesusCustomFootwear]

Correct! And make sure the shoes have completely dried otherwise you can end up with paint on the brush

[@SweKelt]

@@DeJesusCustomFootwear Thank you for the video and tips!

[@SweKelt]

@@DeJesusCustomFootwear How many thin layers of Angelus paint do you recommend for shoes? Until you get the color you want?

[@DeJesusCustomFootwear]

@@SweKelt really varies by color and surface. Generally speaking around 4-5 is the sweet spot

[@Dctreys]

can i use a paint brush for high gloss?

[@Northwest503-b8q]

When customizing air for ones white do u suggest matte 4 coat or high gloss acrylic finisher can anyone help with the difference

[@DeJesusCustomFootwear]

We cover the difference in this video but it really comes down to the overall sheen. Majority of the time you probably want to go matte

[@Northwest503-b8q]

@@DeJesusCustomFootwear ok thank u i appreciate reply back love the videos u definitely help out alot do u have Instagram id love to show u my finished product of shoes i did

[@jenifaulkner8308]

Could you help with a nasty water mark on my Brahmin leather bag before I use Angelus 600 Acrylic Finisher? Many thanks, jenna

[@DeJesusCustomFootwear]

Sure how can I help

[@jenifaulkner8308]

I can't getb reply to.go through

[@ColorMeFresh]

Forgot I had a box of it sitting here, now I’m bout to try it out lol

[@DeJesusCustomFootwear]

You’re gunna love it bro

[@stanfordkoch1271]

Cant wait to get the angelus 4 coat product here in the Netherlands

[@DeJesusCustomFootwear]

Sooo good!

[@gregt2609]

I found that even with a large tip, my airbrush had a hard time spraying the matte. Any suggestions?

[@DeJesusCustomFootwear]

I’ve never had any problems the badger patriot. I suppose you could add 2thin, but I imagine to some degreee you’re changing the strength

[@gregt2609]

Did you have to crank the pressure way up? I use a paasche talon and it sprays the paint beautifully. Whats weird is my matte looks way thicker than some that I have seen online. I wonder if I have a bad bottle.

[@DeJesusCustomFootwear]

@@gregt2609 nope haven’t had to! I shoot around 30 psi for everything I do.. make sure you shake the bottle very well beforehand also

[@ErickDaBarber]

But the 4 Coat Matte is too thick for the airbrush, what should I do?

[@DeJesusCustomFootwear]

I’ve never had any isssues. I know some people thin it out, but I’m sure to some degree you might effect it’s strength

[@rashonandaverycustoms7152]

I just recently started customizing and I’ve been using a spray on finisher, is that a bad thing or just not the best option?

[@DeJesusCustomFootwear]

Which brand where you using? It’s not necesarily a bad thing as I previously used a spray finisher from Krylon for years.. sometimes it can be a bit harder with those to get the desired sheen you’re going for..

[@SilentGames]

I have to start painting shoes again got too many hobbies 🥲

[@DeJesusCustomFootwear]

Come back!

[@SilentGames]

@@DeJesusCustomFootwear I will man hopefully I can find the time out of 9th grade to continue

[@thaabitshabazz4117]

? Is these finishers recommended for suede dye? Reason I ask is because I dyed my wallabees, the maple brown and now the suede dye is smearing on my hands. I set them shoes in the sun to dry for a week now and the dye is still appearing on my hands. Is there a solution for this?

[@DeJesusCustomFootwear]

I haven’t worked on em before unfortunately, I don’t think finisher would be ideal for em, I’d probably try a krylon matte spray

[@thaabitshabazz4117]

@@DeJesusCustomFootwear Thanks for the update however the krylon matte spray is having some bad reviews......either or thanks and I will reach blog a little further

[@Kickks_laundry]

Hi bro, to applying this 4 coat finisher with an airbrush, I'd have to add 2-Thin?

[@DeJesusCustomFootwear]

I don’t, but I have heard from many people that the 4coat won’t run through their airbrush without it

[@SoleToSouls]

Can the high gloss be applied to patent leather?

[@DeJesusCustomFootwear]

Yes, but true patent is still a lot shinier

[@cloud__99]

Help 😭 I used the 4 matt over light grey and light beige and it gave them both a yellow hue, had to strip the whole paint off and start over 😢 I shook it well, used a clean brush and have since then tried it in various ways, with brush or sponge, light or heavy layer, air dry or heatgun (makes it worse), it always yellows. I don’t know what I‘m doing wrong and I’m now scared to use it on other projects

[@DeJesusCustomFootwear]

You’re really suppose to airbrush it, have you done that yet? You definitly don’t want heavy layers. And doesn’t require any heat

[@cloud__99]

@@DeJesusCustomFootwear I don’t own an airbrush sadly 😕 Paint brushes have always worked for me so far, so I didn’t think it would be an issue. But if it’s for airbrushes only I at least know where the problem could be, thank you!

[@junior4475]

Hey jesus i have a question about airbrushing with 4-coat, so i always use the finisher with a airbrush never a brush and since the 4-coat is a bit thick i was wondering if you can use 2 thin to thin it out, thank for the reply in advance

[@Kickks_laundry]

Hi friend, when you apply the acrylic finisher, do you apply 2 thin? or it's only the finisher? thank you!

[@junior4475]

@@Kickks_laundry sorry for the late reply im just now seeing this but no 2-thin just finisher

[@HectorRodriguez-uk6rp]

How do I avoid the finisher from drying with a milky color around the stitching?

[@DeJesusCustomFootwear]

Are you airbrushing?

[@HectorRodriguez-uk6rp]

No, im using brushes

[@DeJesusCustomFootwear]

@@HectorRodriguez-uk6rp airbrushing usually is more ideal. The next few factors id guess- did you shake the body very well before hand? Did you spread the finisher out when applying?

[@HectorRodriguez-uk6rp]

Yes, I shook very well before pouring some onto my paint pallet, where I literally added a drop of duller. Now the entire shoe looks great, except for the areas with black stitching. Now I’m not sure if I should strip it down and start all over. 🤷🏻‍♂️

[@sidromaribecerra1933]

Do I use the 4 coat clear coat after I’m done painting my shoes??

[@DeJesusCustomFootwear]

Sure do

[@sidromaribecerra1933]

@@DeJesusCustomFootwear thank you bro do I still have to go over with the acetone or the leather preparer an deglazer after I’m done or should it be good

[@DeJesusCustomFootwear]

@@sidromaribecerra1933 that’s before you paint

[@sidromaribecerra1933]

@@DeJesusCustomFootwear ok thank you bro god bless thanks for replying

[@Norrisnews]

Quick ? I airbrushed some kicks then tried to put the high gloss 4 coat and the finisher turned white on the whole shoe what happens and what do I do

[@DeJesusCustomFootwear]

Did you shake it very well beforehand?

[@Norrisnews]

@@DeJesusCustomFootwear yes sir I did

[@Norrisnews]

I use Angeles paint. I thinned it out then when it came to the four coat, I seen a video saying that it was cool to just apply it with the airbrush no thinner.

[@DeJesusCustomFootwear]

@@Norrisnews depending on your airbrush and compressor setup you may not need any thinner. I never use any with a very basic setup and have no issues, but hundreds of people have reached out to me and said otherwise. There’s nothing I’m hearing that you did right now that stands out to me other than potentially applying too much. Especially if you really shook it well before, that’s an easy to skip step. I don’t have great news on what it takes to remove it other than I would try using a glue and residue eraser before ultimately needing to start completely over

[@Norrisnews]

@@DeJesusCustomFootwear thank you so much. You have been so helpful.

[@michaelabelardo4552]

Is the matte 4-coat basically an upgrade from the matte acrylic finisher or are they 2 totally different things?

[@DeJesusCustomFootwear]

It’s an upgrade that is not only much more matte, but it’s now urethane based so it provides a smidge more protection…

[@michaelabelardo4552]

Ty ty!!

[@problemon]

Why 4-coat matte finisher make black paint look so grey? Any help? What i do wrong or what should i do?

[@DeJesusCustomFootwear]

If I had to guess you applied a bit too much, or the bottle wasn’t shaken very well beforehand

[@problemon]

@@DeJesusCustomFootwear thanks i try that, but be honnest, for you whats the best matte finisher for black shoes, LK, angelus or kryon?

[@DeJesusCustomFootwear]

@@problemon LK and Angelus are tied for me

[@problemon]

@@DeJesusCustomFootwear thanks

[@Kessemb]

Hi, i cant find your preferred tape in the link anymore, can you please recomend another one?

[@PoBoiKustom]

Do you ever hold an airbrush class online?

[@xalphawo1f517]

Are you recommending to still add 5-10% of the matte 4 Coat into the color paint? Or is is good enough to just use as a finisher and that will give a matte finish?

[@adoboFosho]

What? This is a finish not a duller lol

[@2201jc]

How high should the psi be when airbrushing the matt 4 coat

[@benguy3087]

So this negates any need for the use of duller?

[@DeJesusCustomFootwear]

Yes it does! One less step 🤙🏽

[@kantaphonsirinopawong3145]

What nozzle size you are using, i try to use satin 4coat with my airbrush but look like it is too thick

[@DeJesusCustomFootwear]

.05 badger patriot 105

[@zpcustomsneakers]

Hey Dylan with the 4 coat matte finisher if you use it in the airbrush do you mix in 2 thin? Also how thick of a coat do you lay on and how many coats would you recommend with the finisher?

[@DeJesusCustomFootwear]

2 coats of the finisher is my usual recommendation. You shouldn’t need to use any 2thin, however many people have reached out any mentioned they were experiencing something similar. You might be able to turn up the psi on your compressor to get it to run more smoothly or I’m sure adding a small amount of 2thin won’t hurt

[@zpcustomsneakers]

@@DeJesusCustomFootwear appreciate the feedback brother!

[@jakecastillo3]

How many coats of the matte 4 coat do you apply?

[@DeJesusCustomFootwear]

2

[@jakecastillo3]

When painting the tongue, do you still run 2 thin along with 2 soft? Or will 2 soft thin it out for the airbrush?

[@DeJesusCustomFootwear]

@@jakecastillo3 which material are we reffering to? Although there’s no situation basically where you need both. 2soft will thin the paint

[@jakecastillo3]

I want to air brush a Jordan one Tongue. When i do my paint mixture do i just mix it w 2 Soft?

[@DeJesusCustomFootwear]

@@jakecastillo3 depends on the material as certain Jordan 1s will have different materials. If it’s nylon then you would mix w 2soft

[@crixsimmons_]

How do you dry with a blowdryer? High heat and wind force? I applied my finisher but it hasn’t dry fully over 2 days

[@DeJesusCustomFootwear]

Finishers not dry? I can’t imagine what that would be. The only thing I can think of was that far too much was applied. It dries to the touch within an hour or so

[@qdm6857]

Do you know if there is a way the remove the old matt finisher without damaging the paint? And if not can i use the 4-coat finisher on top of it. By the way i've been using the 4 coat finisher with a brush since i don't have an airbrush and so far i've had 0 issues so it is possible to say the least.

[@DeJesusCustomFootwear]

The only thing I can think of that may work is trying to rub it all off with a glue and residue eraser. It shouldn’t damage the paint but will likely peel back the finisher

[@patricklary81]

Could you tell me if anglelus finish work on polyurethane midsoles like an air max 95, or like an airmax command which both have soft cushion bottoms? I ordered some, and it's on the way, but if it doesn't is there a type of paint to use that won't crack? Or are softer bottom shoes doomed when it comes to repainting? If shoe companies can do it we should be able to as well.

[@DeJesusCustomFootwear]

No unfortuantely I don’t recommend ever paint rubber or midsoles in general as they’re just way way way more likely to crack

[@harrybrown7680]

How much do I need for a pair of lace-up boots, is a small bottle with 29,5 ml enough?

[@DeJesusCustomFootwear]

Yes that’d be enough

[@DeJesusCustomFootwear]

@@twisteddreams1488 glad to help

[@wadecrouch6803]

Do you need acrylic finish if you use 4 coat finish? Or just one or the other?

[@DeJesusCustomFootwear]

Just the 4coat is all you’d need

[@bandit2896]

Quick question about how many coats of 4-coat should i use and how much dry time in between?

[@DeJesusCustomFootwear]

2 coats is plenty, about 20 minutes between

[@bandit2896]

@@DeJesusCustomFootwear alright sounds good, thanks for the reply

[@uvebeenblinged6802]

Can I use this on a faux leather jacket?

[@DeJesusCustomFootwear]

Yes

[@chriskilgoe]

To matte a shoe out can I do it without paint but with just matte finisher?

[@DeJesusCustomFootwear]

Yes but it might wear off easy if not prepped

[@chriskilgoe]

@DeJesusCustomFootwear 10-4 I will definetly prep it 1st...u think I should use an adhesion promoter 1st then a matte finisher...OR prep good then matte finish?

[@DeJesusCustomFootwear]

@ option 2

[@planetbarton]

Thanks Master Customiser. Does this mean we have a product that allows midsoles to be painted?

[@DeJesusCustomFootwear]

No unfortunately , the issue that occurs with midsoles is that the paint wont bond with the rubber.. this wont have any impact on that.

[@simonediamante7556]

Hi! Thanks for the video. There are any difference on the look between 4 coat and the normal version? Or the end result looks the same?

[@DeJesusCustomFootwear]

Yes huge differences that we talked about in this video

[@donneminnaar8675]

Hey, quick question regarding this new product! if I’m using the new matte finish on AF1 customs do i still need to use duller in my paint?

[@simonediamante7556]

Im curious about it too

[@2201jc]

Do you mix the 4 coat with the paint or just apply layers after your done painting the shoes?

[@DeJesusCustomFootwear]

Just as a topcoat once painting is complete

[@brianb3642]

Would you also apply a 2-3 coats of Krylon matte finish spray over the 4-Coat matte finisher?

[@DeJesusCustomFootwear]

Nope 2 coats of the 4coat and you’re all set

[@blarrain4684]

What do you clean the brushes with for the 4 coast satin?

[@DeJesusCustomFootwear]

I recommend applying it with an airbrush

[@lj7436]

for the 4 coat what sheen should i cop to make my customs look factory production like

[@DeJesusCustomFootwear]

Go with the Matte!

[@lj7436]

@@DeJesusCustomFootwear thank u!!! ur content is sickk

[@aurestteme7222]

Do you still recommend using duller with your colors and then applying the matte 4 coat?

[@DeJesusCustomFootwear]

Nope no need for the duller

[@ltk-box-_u7013]

Should I sand my shoes if I have the Angelus deglazer

[@DeJesusCustomFootwear]

I do

[@moreno522]

Hey i was wondering if u'd have a "finishing touches" video like I'm looking for one in general but have no luck yet finding one. Like how do u make sure u color every small gap without accidentally coloring another panel and what to do if u do end up doing that just so u can have ur end product look professional instead of amateur. I'm working on my 1st pair and they are Jordan 1s mid and with all those edges it's taken me so much time and cursing to get the job done and I'm still not done yet honestly 😂

[@DeJesusCustomFootwear]

What a great video topic, I can’t say I have one perfect one already made to point you to.. definitely gunna add that to the list

[@moreno522]

@@DeJesusCustomFootwear I'll be looking forward to it! :D

[@unstoppablemorayo4949]

I love it, I want to learn it.....

[@joeljoseph2198]

Used the 4 coat for first time and had brush strokes that I’ve never had before with LK. Could it be the brush I used ?

[@DeJesusCustomFootwear]

Potentially, here’s a couple of things I’ve noticed.. you want to use a new synthetic hair paint brush… and you don’t want to over spread the finisher like you do with traditional painting.. you’re more so treating it as a glaze otherwise you’re essentially dragging the finisher while it’s drying causing those strokes

[@joeljoseph2198]

@@DeJesusCustomFootwear thank u !! I knew u would know. U r the man & got started doing custom shoes from watching ur videos

[@jermainewilliams1013]

@@DeJesusCustomFootwear I wanted to know where I can get the stencil for the bel air theme

[@DeJesusCustomFootwear]

@@jermainewilliams1013 here you go! www.etsy.com/listing/840238612/bel-air90s-pattern-stencil?ref=shop_home_active_19&frs=1&crt=1

[@franklim939]

Hopefully you can compare 4 coat finisher to a factory look so we could know is it really achive the factory look finished. Thanks

[@DeJesusCustomFootwear]

Yup go with the matte 4-coat and you’re off to the races!

[@franklim939]

@@DeJesusCustomFootwear thanks man! 4 Coat matte said goodbye to angelus duller 😅😅

[@cadsawancrew6267]

Can I use brush with a finisher?

[@DeJesusCustomFootwear]

I kinda sorta recommend an airbrush a little bit more unless you’re really really comfortable with a paintbrush.. it’s a lot easier to end up with brushstrokes

[@karenclarke3643]

Can this finisher be used on silver toe Jordan 1’s? Or which one would you recommend for silver tips. Trying to fix the scuff on the metallic silver part of the shoe.

[@ConqueringWhatsMine]

To airbrush the 4 coat flat, should you still thin out at a 1:1 ratio?

[@DeJesusCustomFootwear]

Nope as long as you have a .5 needle you don’t need to thin it out

[@ImFreeze7]

@@DeJesusCustomFootwear Hi, I've got for the first time an airbrush and it is 0.3mm. Do I need to thin the 4 coat? (Is it even possible without lowering its quality?) I only used it with a brush since I feel it is so thick. Thanks!

[@DeJesusCustomFootwear]

@@ImFreeze7 you’d probably want a .5 if you’re airbrushing it.. I can’t say forsure it will overall weaken the finisher, but I’d imagine you’d be fine

[@hekimkilic2219]

My Paint is cracked what should i do to fix them i used the acrylic finisher matte first and then the 4 coat matte

[@hekimkilic2219]

You cant use them Both just 1

[@DeJesusCustomFootwear]

Paint cracking will have virtually nothing to do with your finisher, that’s always always always going to be a prep issue

[@matyastibitanzl4552]

Hello, I would like to ask, is it normal for the paint on the toe of the shoe to crack over time with normal use or if it can be prevented somehow? And the last question, can I use 4-coat instead of the classic finisher? Or what do you think is the best finisher? Thank you very much for your answer

[@KayTooLoud]

The only way to prevent that is adding more coats/layers! toboxes are where the shoes bend and flex naturally so adding more layers prevents that from happening.

[@los843]

Where could I get elephant print stencils ? 👀

[@DeJesusCustomFootwear]

There’s one on our etsy fam!