ISUZU MU-X 3 YEAR REVIEW - 90,000km || Good and Bad || MODIFIED Vehicle and Accessories Walk-Through

[@bluedunn374]

Ive got the 15.5 and never had a problem (just did 100K) but I suspect ill need a carbon clean soon. If you made an in depth carbon cleaning video for the MUX or DMAX 4JJ1 (intake manifold / EGR ect) that would get some serious views, no one has done a decent one yet. Use this comment as a show of hands and maybe someone will make it?

[@PJSinohin]

And include the EGR and front mount intercooler cleaning too.

[@TheExemplifier]

Would 100% watch this

[@slackstringlvr]

Agree!

[@bunglebro]

Have a 2014 dmax had it since new I've done 220,000kms All I've had to replace are the belts. Cv joint Master and slave cylinder in clutch. Front wheel bearings and windcreen spray pump. Awesome vehicle

[@adamtaniasargent1386]

That is why I looked at the 2016 and below MUX.. But have to agree.. Bloody love the MUX even more after hearing the issues my mate has had with his 2017 Colorado. Another great Vid Nick and cherish the time with the young ones as they grow to bloody quick..

[@markburgess276]

Great video…just on the verge of getting a MUX. First thing I noticed is how clean it is….everywhere.

[@VideoShowMeHow]

Nice stuff mate, good insights 👌

[@JeffreyWalder]

Good video mate mate Ordered my dmax xterrain in march Still waiting have so much stuff at home for it.... Keep up the great videos

[@LowRangeNick]

Thanks a lot Jeffrey! Hope your new car comes soon for you 😀

[@miaomiaomiao1272]

Hi，nick，I‘m a chinese user of MU-X，My vehicle is 2017 version，with more than 160,000km，now still in good condition.

[@miaomiaomiao1272]

The vehicle is really a reliable vehicle,it's never broken down on me ，only some small issues

[@siddharthagnihotri5371]

thanks a lot mate! yes i have watched your video before fitting to my isuzu dmax vcross here in india. you are doing fabulous job keep making such videos buddy cheers

[@comegetsome3855]

nick thank you. I have used your guide for a heap of stuff cheers

[@PaulOff-RoadDownunder]

Great rundown mate. My MUX 2018 has had one turbo replacement.... Fingers crossed no more ! 10lt per hundred 😲..... Mate I'd struggle to get that but I've got 4 bike racks & awning on the roof I suppose. I'm about to fit the Munji diff drop & relocate. Cheers for the great videos

[@supercreek5381]

Again, really great work Nick. I have learnt alot from this. More so about the warranty jobs you had done. I now know what I can look at in my next service. Again thanks alot.

[@charlesclayton4644]

I wouldn't feel safe without skid plates underneath although they also reflect the engine noise up though the floor. Love all you videos.

[@shooters70]

Great video Nick. like any car its how you use it that will determine the life you get from it. I also have the 2018 MUX LS-T model and love it. since owning it for a year now I have made some upgrades, snorkel, bigger falken AT3 tyres, 2 inch lift, roof racks and about to put on southern cross rock sliders. Lucky enough have had no issue with the vehicle put probably dont 4WD as often as you do. When I do go out it does take a beating though, so good to know what to look out for after watching your video. All in All a great vehicle.

[@mjhmech4903]

Great review Nick. 👌I think it may be one of your vids re RG Colorado body mounts for the front?

[@PJSinohin]

Those red bling bits really brings in a lot oh HP!

[@_monkee]

Thanks mate. Have an '18 MU-X. 2 x turbo replacements and 1 x head unit all easily sorted on warranty otherwise has been great. In terms of bang for buck its hard to beat. Travelled 85,000km but with the 4JJ1 having a B10 rating of 500,000km I think she has a few more good years in her yet.

[@gregtobin7285]

What is the B10 rating?

[@_monkee]

@@gregtobin7285 B10 rating of 500,000km means 90% of engines are expected to reach 500,000km before requiring a rebuild (or 10% won't make it that far...)

[@skudaaron1986]

Mate these are great videos. Keep it up.

[@williamperri3437]

I just miss the Isuzu Rodeo and Trooper! They may have incredible reliability now but I just love the trooper more than the 4Runner or Pathfinder

[@charlesgalea69]

Thanks for the awesome video today.

[@Wdeane1957]

Great video Nick! Have all the replacement turbos been the "green dot" turbos as these are supposed to be the upgraded replacement unit? I had mine replaced on my 2018 LSU about 6000 kms ago. Also, although you've had your suspension upgraded, how is the fully loaded weight with missus, 2 kids, associated gear, and additional weight of bullbar, winch, bigger wheels & tyres, rock sliders, drawers compared to factory GVM of 2,750 kg?

[@ginonando6964]

i have the 2018 Dmax same motor as yours done 130000km no issues so far

[@JOGOonYouTube]

Another great video. One thing I did to my D max, is I fitted aftermarket bonnet gas lift struts. I find they work really well, and working and moving about around the engine bay is so much easier without the bonnet strut in the way.

[@daveinoz7813]

Can you please advise what brand and where you sourced the struts? I am interested in a kit as well. Thanks.

[@arwedlang3702]

Agree, with a Cannon Ute, you getb those lifing struts included in the deal......another one of MANY draw backs of DMax

[@tommyscally5948]

Hi nick great video., Iv a provent 200 fitted on my dmax AT,35 it's on since December , I got a comment from a guy that the provent ,200 cause valve seat damage on Toyota engines as the air going in to the engine has no oil deposits in it to lubricate the valves and seat as the engines are direct injection and not from manifold I can actually see it might make sense, I'm going to remove my proven as it probably is over efficient its to good, and I don't want to have to pull the head off at a later date

[@kelvin869]

With those rubber inserts Nik; have you tried painting them with something akin to Rhino Coat? It would be interesting to see if it helps.

[@jixal]

If you put down the passenger seats do you reckon a 6ft"3 person would be able to sleep in the back? Would prefer something like this over a campervan. Might get a RTT but also handy to be able sleep in it for single nighters somewhere.

[@LowRangeNick]

I think you should be able to 👍

[@michaelmichalakis3023]

Great video. 4th turbo? Consider ditching the catch can....even though it has become a necessity??? After doing some homework I removed mine and it runs better . Blown turbos and blown engines are on the increase with catch cans.

[@hi-se4sm]

My 2021 isuzu mux has one major problem i have, bump steer wear in the tyre i dont have after market parts. Im thinking about fitting a catch can to avoid clog up intake. But i did find out the air cleaner had this cloth cover over the paper which i removed it and would you believe that it drove a whole lot better. Mind you this cover is best left on a 4wd to stop too much dust but most 4wd people have taken care of that problem of dust

[@matthewharrison4605]

Watched your snorkle install many times while installing mine 👌

[@jbangz2023]

is is DIY?

[@ethanlee7125]

That's a modifications! What about the previous generation MU~7 ? What problems does it have?

[@darrenmcdonell8649]

Thanks Nick I just bought 2017 mux very happy with it n yes it's isuzu tough

[@jamestanner9198]

What about a review on the car not just the extras?

[@markgreve5646]

Hi Nick, great informative vids thanks. It would be great to see you film a video of replacing a cv joint on the mux to give an idea of whats involved if one breaks out on the tracks, thanks again.

[@markhann9577]

I've gone from my much loved gq patrol to the mux because of gvm deu to new hybrid camper being over 2500 I know I'm not the only one scratching their head trying to sort the new SUV with information

[@appurupie]

Hi Nick, awesome videos and super helpful. I have a question for you. I’m curious as to why you’ve chosen not to do a tune? Your answer will help guide my decision on which mods to do first on my own new MU-X. Thanks Nick!

[@LowRangeNick]

I have had the vehicle tuned and I believe it was the cause of a few issues I was having. I have since removed the tune and don't intend to retune it at all. I prefer reliability over a slight power increase.

[@calummartin4641]

@@LowRangeNick Can I ask what issues you believe were caused by the tune? Was it mainly the turbo issues or others as well? Thanks

[@LowRangeNick]

@@calummartin4641 yeah I think mainly the turbo

[@MrBengee2010]

I have the sister model of this being the Holden Colorado however watching your vids I have been able to do a few alterations to my vehicle including the adding of the safari snorkel. As always that’s for the vids

[@willemvantsant5105]

Hi Nick, have a 11/2016 MUX, it has only done 6000 K's, what part is failing on the Turbo, bearings, impellers, waste gate etc. Considering buying a new MUX for my Daughter but having second thoughts regarding the reliability issues.

[@LowRangeNick]

Hi Willem, there is a manufacturing defect in the mitsubishi turbos that are fitted to the vehicles. There have been a few part revisions over the years. The most recent is meant to fix the issue.

[@joshobrien7708]

Good review video Nick 👍 I have a Pajero Sport, and I also had to replace the seat base on drivers side like you. Sounds like it can happen with any model 4x4. Besides that I've had no other issues. I have heard also that other Pajero Sport owners (not me) have had the same issue like you when it comes to leaking fuel tank Cap. So it seems it happens with other manufacturers to.

[@-PORK-CHOP-]

Funny, so often I hear Hilux owners bag out Rangers !, I have a 2013 and it's only been in unexpected for factory recalls, other than that nothing has broken, I am hesitant to upgrade to the new Ranger as it's only newly released, I will wait for them to be out a while to iron out any issues

[@MiniLuv-1984]

The MUX isn't exactly Izuzu tough is it? Too many design and production failures for a design that is now getting on. Couple that with the 10k price hike on some models and they've lost me. Thanks Nick for your honest review.

[@pyra6517]

Hey what was your problem with the turbo ? Why so many swaps?

[@LowRangeNick]

There is an issue with the factory turbos. Manufacturing defect.

[@markhann9577]

Be nice to just find the best 2inch suspension lift that we can all afford every day driver off road towing a caravan when we get a chance

[@TheAthavanleon]

Well done mate... Enjoy - Its a good car... You love your car... It will never leave you stranded.

[@rolandpleasefgojpooiiu7666]

Finding you very helpful. I have had a turbo replaced new one has green dot by isuzu nz they have been great but now the new one is singing again would you recommend any other after market turbo ? Thanks Roly

[@LowRangeNick]

Apparently there is a few places making replacement turbos. I don't know Wether they are any good or not yet though. My turbo issues have been fixed by getting the turbo replaced with the latest revision in 2022. They have revised the turbos a few times.

[@Flyabye]

Great video so far. Any plans on doing the exhaust?

[@LowRangeNick]

Hey Jules! No plans in the near future. I may get a muffler delete pipe at some stage. More so for clearance under the vehicle and not so much performance. There's not too much gain in noise or performance with the DPF models.

[@robfowler3824]

Gday Nick another great video mate well done. I've been looking at buying the new MUX but my wife wants a Pajero sports I've been looking at lots of reviews and videos of each make as i think there both pretty good rigs and good value for money. I'm looking more so at a towing ( a small van) and light off roading, do you do much towing in your Rig ? and do you have a mechanical trade ? as you seem to do all your mods so easily. it is great to find out the common faults of a vehicle before you buy one (the dealer sure wont tell you lol) keep up the good work i really enjoy your content.

[@LowRangeNick]

Hi Rob! That's very exciting. They are both a good choice. I reckon the best idea would be to go and drive both vehicles, you and your wife. It's alot easier to decide on what you like after you have driven both vehicles your tossing up between. I am a mechanic by trade and have worked in accessory fitting and electrical fitouts in previous jobs. I have only towed a small box trailer and motorbike trailer all under 1t. We are planning on getting a camper van soon though 😊 Thanks alot for the comment

[@krump743]

Hey mate, did you use a few pin bolts drilled through on the bull bar and mounting bracket. Due to the elongated mounting holes, i just feel if you hit something the bar will move along way on the elongated holes, perhaps it would stop the bar moving back into the body if you hit stuff.

[@ebail4445]

Thanks a lot mate for the share. Nice and good information for us.

[@milnerontheroad57]

4 turbos, you have got to be joking! Mine is going in this week to have the original one replaced, thanks to you pointing it out to me... "sounds like a police siren". Why haven't they done a recall? Like the videos.

[@Wdeane1957]

They'll only do a recall for safety issues, not mechanical, unless it's brakes or steering that may fail.

[@milnerontheroad57]

@@Wdeane1957 Didn't know that. Thanks 👍

[@danepatrick4283]

Hey Nick. Thanks for another great video. Getting the same AFN bar fitted in two weeks. I also am having stedi 8.5 type X sports mounted to it when they install the bar. You reckon those will be ok?? Also, did Isuzu give you any fuss regarding replacing the plastic on the base of the windscreen? Mine is starting to look chalky and getting lighter. Its a 19 that sits outside during the work week. Cheers mate.

[@LowRangeNick]

Hey Dane! The spotties may be too big and you may experience the light shuddering issues like I did. Isuzu replaced the trim without any issues.

[@danepatrick4283]

@@LowRangeNick thanks for the reply mate. If I go lightbar, I will likely need another up top to match the output right?? In regards to the chalky look of the plastic, assuming a replacement will suffer the same fate - check out Maxima SC1 Clear Coat. Its a spray that I used for my motocross bikes to keep the plastic looking new. I applied some to my trim last night and it looks brand new again. I will see how I go and how long its lasts, but it did wonders for my mx bike. Its worth trying though as a can doesn't run too much. Your local bike shop should either have some in stock or be able to get a can for you on order.

[@LowRangeNick]

@@danepatrick4283 You could go with a dual row 24" light bar or a high output single row. The stedi is still a reasonably cheap Lightbar, there are definately higher quality bars on the market that put out alot more light. I'll have to check out some of that spray you taking about, sounds good!

[@danepatrick4283]

@@LowRangeNick I spoke to stedi today and like you stated, they reckon the spots will be a pain to mount and align. I am almost sold on the 23.3 inch double stack pro model..but wanted to ask you if you think a 28 would fit. I called AFN and they could not confirm. I know it would be pushing it, and I am assuming no but wanted to check since you have the 24 single row. Thanks mate. The plastic still looked good after spraying and it was in a dust bowl out in the blazing sun all day long today. I will share some pics via facebook. The shop installing my bar is giving me a stedi light kit at cost with free install due to a stuff up so I am not sure I can bargain another brand, but do you have any recommendations just in case? Thanks so much.

[@LowRangeNick]

@@danepatrick4283 I think 24" would be the biggest you could fit in there. There's not much room either side. The double row would be the go, good choice. As for other higher quality lights there are lazer lamps and xray vision.

[@higgoist]

Thanks for the video. I love the fridge and draw setup. What drawers are you using?

[@LowRangeNick]

Hi Tim, it's the 900mm titan single drawer and a brass monkey 20l fridge drawer with a custom made base and top.

[@KrisH-mc8hd]

Cheers mate and looking forward to seeing more awesome content 👍

[@mattde27]

I have no idea how you fit a 70 series tire, when you have a tow bar fitted. I have the same car 2019 model and there was no way we could make a 70 series tire. Had to go back to a 65.

[@LowRangeNick]

It fits in there fine 😊 About 1 cm clearance off the panhard rod.

[@mattde27]

Strange, as mine was hard against the rod and the tow bar plate.

[@andyg9991]

@@mattde27 will depend on the wheel offset

[@mattde27]

@@andyg9991 wheel offset doesn't change the diameter of the wheel and tyre.

[@andyg9991]

@@mattde27 Of course not, but depending on the offset, the wheel could sit further in or out causing it to either miss or hit any suspension parts

[@SharrodVisuals]

Thats pretty unfortunate to hear. 90,000 are so many turbo swaps. Damn

[@donaldo1974]

Replace the Isuzu body mounts with the Holden Colorado body mounts they're a lot thicker and are much better than original, they think the failing body mounts may have something to do with the cracks in the chassis above the front wheel arches under the bonnet.

[@toddsmash]

Another Great upload Nick. Thanks mate. I have the MUX 16.5 LST. I love my MUX. I have an older head unit than yours and never had an issue with it. I wish it had Android Auto or the like but other than that, been a treat. I am in the process of upgrading it now as i finally have the money to. I've put 182000kms through the car in just under 5 years (yep...i've done a bit in him). What would you recommend as the first upgrade mechanically? Keep up the great work mate.

[@LowRangeNick]

That's Awesome Todd! Sounds like your Mu-x has been used for what you bought it for! That's great! I think the best upgrades you can do are suspension lift or upgrade and some good off-road tyres. You will make the vehicle alot more capable with those 2 modifications. After that you can get out and use the vehicle and see what else you think you need 😊

[@toddsmash]

@@LowRangeNick Thanks mate. Really appreciate also how well you tend to the comments section. Looking forward to your next upload.

[@jamestanner9198]

Yep good winch

[@lentsoemamatela1024]

@LowRangeNick thanks for the video, why have you gone through 4 turbos ?

[@LowRangeNick]

There was a manufacturing defect in the turbos. It has been rectified now with revised turbo charger.

[@rodneymatthews6860]

Hi Nick, I know this is a different thing but do you know how to take the tail light covers off a 2015 MUX to change the blub without breaking them. Thanks Rod

[@tpv59]

EXCELLENT. BIG THUMBS up !!!

[@olabergefall]

Hi Nick! I view all your vids as I'm also a MY18 owner. Appreciate the great work you do! Would you mind sharing what replacement battery tray you've got? I suspect my factory battery is about to give up on me and fitting a beefier battery is tempting. Cheers!

[@LowRangeNick]

Hi Ola, Thanks alot! I haven't got an aftermarket battery tray. That size battery fits in the factory tray. You just remove the plastic battery seat off the factory battery and it fits straight in.

[@olabergefall]

@@LowRangeNick would you mind sharing the model number of your Century battery? Thanks in advance.

[@cjwest9094]

Hard to believe the turbo issue is so bad.. I'd expect this reliability from a ford 🙄 I guess the turbos are not made by Isuzu? Is it only recent models that have this issue?

[@LowRangeNick]

Yeah they are mitsubishi turbo chargers and the issue is just on the 2016.5 to 2020 mu-x

[@cjwest9094]

@@LowRangeNickright thanks Nick, that explains it. At least they've covered them under warranty like you say 👍

[@dougmoody4092]

Hi nic very good video i have the 2016 mux anf have done around 35000 k on the last 4 years .not much i know , but was wondering if you have any suggestions in getting the spare to wind down using the winder. I picked up a little sharp stone the otjrt day and needed to change the tyre. It took me some time to finially get the spare down.The issue that i have is finding the socket with the rod and being able to align it to engage it to wind it down. I had a idea of mounting a piece of allum tube up under where the spare tyre is like a guide .Would like to hear your thoughts on this issue Regards Doug m

[@LowRangeNick]

Hey Doug! I agree it can be a little difficult to align. I usually just shine a torche down the hole while I am trying to align the rod with the reciever.

[@dougmoody4092]

Thanks nic will give that a go next time

[@paulflapper]

Like your videos reason i am watching have had a few issues with 2018 mux one is the squeal in wheels thanks for solution. Other 1 is water in cab near door pillar.

[@LowRangeNick]

For the water in the cab, check firewall grommet for any aftermarket wiring going through or if the grommet has popped out. You may need to seal the firewall grommet with silicone if there is aftermarket wiring going through. The other possibility is if you have a roof rack that bolts or rivets to the roof just check that it has been sealed properly. Most likely the firewall grommet though.

[@paulflapper]

@@LowRangeNick thanks again am going to dealer in two weeks is definitely roof no rack will let you know how we go. Is great car .

[@watchyatalkinabout4494]

Would love to know the result of your leak issue My dmax leaks like a sieve Cheers

[@johnnumbat9782]

Thanks for a good report Nick - I actually drive a 2010 Hilux auto diesel and it has been faultless with 281000 ks now - your Isuzu is a good vehicle for your family/offroad needs and great to see the ‘little ones’ well protected - it appears Isuzu has some quality work to address for the next models before you can be confident of its build which can happen with new gen/model versions - I think that asking for over $50k now you would expect Isuzu has sorted out the issues as I suspect they’ve sourcing some cheaper components from China like the windscreen wiper arms - John in SA

[@Herosade]

Hi John from SA. I hope you realise china is light years ahead of Australia, for your concern about the cheaper parts is because the manufacturer decided to cut cost or just sourcing a alternative. You can't blame everything on china for things that don't work out. I've been working in Australian manufacturing for almost 20 years, and China continues to outperform us both in quality and in output, and they are alot cheaper. Of course of you decide to source a $1000 part with a $200 then really you're no longer comparing apples with apples, but this a companies choice, not because it came out of China. Thank you.

[@johnnumbat9782]

@@Herosade agreed about Australian poor quality car manufacturing which is why it disappeared here with Ford and GM (Holden) - I never mentioned Australia because most Australian delivered utes are built in Thailand - the rest come from Argentina, Spain, China and the US-built rubbish RAM and GMC redneck trucks - I would still not buy a vehicle from China.

[@garynew9637]

Ive seen a few radiator supports and chassis crack from heavy bullbars. Crazy.

[@jbsbluesbreakers3347]

great video thank you!

[@ginonando6964]

? what are you thoughts on the new 2021 izusu nick

[@LowRangeNick]

I think they look pretty good! They also have some nice upgrades and updates.

[@goeffburdon7351]

hey Nick we are in the process of buying a 4x4 .we looked at the new MU-X yesterday .can you give us any advice cheers Geoff😊

[@LowRangeNick]

I think it would be a tough pick between the prado and the mu-x !

[@goeffburdon7351]

@@LowRangeNick thanks mate

[@kenezos]

Good vid mate. Wondering what the issue is with the stedi light bar? Not bright enough

[@LowRangeNick]

Yeah, it's just not that bright.

[@kenezos]

@@LowRangeNick ahh righto. Shame though as it’s a nice bar

[@icaroivann]

How often do you grease the u-joints? And what grease do you use?

[@LowRangeNick]

Every service and just use molly

[@icaroivann]

@@LowRangeNick Will you do a video pointing out all the grease points on the MUX/Dmax? That would be really helpful

[@LowRangeNick]

@@icaroivann the only greasable points are the front and rear drive shaft uni joints and the front drive shaft slip joint.

[@jamestanner9198]

How much extra weight has all the extras put on your car? Are you close to gvm now?

[@davideddy2321]

Hey nick we will tow heavy did you up grade the GVM

[@LowRangeNick]

I haven't upgraded the GVM. If you are planning on modifying the vehicle and towing, then a gvm upgrade will be necessary. We don't usually tow, so we are good 🙂

[@jasoncarandang3866]

Hi nick. What is your size again your tyres and rims? And the off set? Cheers!

[@LowRangeNick]

Hi Jason, 275/70r17 tyres and 17x8.5 pos 7.4mm offset rims

[@judithcake6918]

We have a Isuzu Mu-x 5 door wagon LST Automatic 2019 and we have Engine vibration at 1100 - 1350 which we can feel and hear, as it’s only done 32,000, we were wondering if you have come across this before? We find your Videos interesting, thank you.

[@garynew9637]

Warranty.

[@mic8492]

Have you taken the rear seats out?

[@LowRangeNick]

@@mic8492 yep, sure have.

[@reganwalsh3891]

Hey Nick, love your videos! What brand and name are those metal tie downs you use for your drawer/fridge platform? I have a similar set up and want the ones you have. Thanks

[@LowRangeNick]

Hi Regan, I got them from bcf as part of a dometic fridge tie down kit.

[@daveinoz7813]

Another great video Nick, cheers! I have the 2018 D-Max and have had a great run for the 60,000k so far. Fitted an alloy bar for the weight saving on stock suspension. Running Wildpeak AT3 265/65/17 on the stock alloy rims and they work a treat. We do more dirt road than hard offroad work, but the package is great.

[@growellyfilm]

Hi Nick great video thanks. Just wondering why you went with an elocker over standard? Thanks

[@LowRangeNick]

E locked just has 2 electrical wires running to the back diff, easy to maintain and repair if for some reason an issue occurs. Air lockers have compressed air line running from engine bay compressor into the back diff, the seals leak, diff oil can pump into the air compressor and if an air line busts its a pain to repair and find leaks.

[@vanllinx]

Hi Nick, hows the brass monkey drawer fridge secured? Is it just friction to the carpet or are there some bolts

[@LowRangeNick]

I have 2 bolts on the back of the fridge and then the front is just a really tight fit with the carpet so it doesn't move

[@CP-xy5ju]

Great vid again Nicki thx. Seeing as you seem to like red does the MUX come in red? Or like me take what they had at the time if price is right!

[@LowRangeNick]

They do come in red! I don't know if I'd own a completely red car but I am actually a big fan of the Blue. I chose silver because its easy to keep clean, hides the scratches and doesn't fade.

[@steveandtyler1]

Hey Nick , How did you find it in super soft sand like Bribie Island etc Also , how does it go towing say 2.5t. Any idea ? Cheers Steve

[@LowRangeNick]

Hey Steve! It loves the sand, goes awesome on the sand. The heaviest thing I have towed with the mu-x is about 1 tonne and it does it easily. I think 2.5 tonne would be a lot different though

[@watchyatalkinabout4494]

2015 dmax We tow 2.8t. Combined fully loaded 5.4t Custom tune on dyno Transmission cooler 268000km Never had a problem

[@seeingas]

This video does not fill me with confidence about owning my Isuzu. 4 turbos, crashing head units etc etc etc does not indicate a good vehicle make ?

[@LowRangeNick]

Every vehicle has issues. New or used, they will all eventually develop issues.

[@seeingas]

@@LowRangeNick Not true, one should not expect any issues for the first 3 years ? Prior to my MU-X I had a new Mitsubishi Outlander with 140,000 trouble free kilometres, stock standard. Then a Great Wall X-240 stock standard that did 165,000 kilometres on mostly outback roads with no real problems. Then a new Mistsubishi Challenger stock standard for 135,000 kilometres towing an 18ft caravan, with zero issues over 5 yrs,. I would not expect any problems whatsoever with my 2020 MU-X for at least 5 years, however, I'm nervous now ?

[@simmosays]

3 turbos, FMD.

[@jamestanner9198]

What's fuel economy like with bigger tyres?

[@LowRangeNick]

Average 10l per 100km.

[@jamestanner9198]

@@LowRangeNick that's great mate has mux and after 265s rack tow bar bull bar winch draw full fridge etc only getting 500 to 550 out tank. And a throttle controller

[@jamestanner9198]

@@LowRangeNick whats your weight all up now??

[@LowRangeNick]

@@jamestanner9198 Yeah I get about 550 to 600km to a tank but if you calculate the rolling diameter increase of the bigger tyres and speedo correction etc. Etc. It works out to be around 10l per 100km. I never run it empty though. Always fill up at 3 bars left atleast. With all 4 of us in the car and our gear we are very close to GVM.

[@Deatomizer]

4 Turbos?? Wow

[@4bnewb969]

Nice run through Nic 👍 With yourself being a mechanic by profession it would be interesting to know what tools and spares you carry. Cheers

[@gerardwilton6165]

Do you think the catch can contributes to the turbo failures? Why do you remove it before getting turbo replaced?

[@LowRangeNick]

Because it is right in the way of the turbo being removed and I don't want the idiots at isuzu touching it. They have already left my intake pipe off to the snorkel, broken all the clips on the airbox and left the vaccum line of the airbox during the turbo replacements. I dont trust them.

[@grantreid8583]

@@LowRangeNick I know where your coming from i used to work for an engine reconditioning company and we used to get called into most of the local dealers most of the time to remove broken studs and bolts fit helicoils to stripped bolt holes spark plugs etc. i know the people that are employed by these dealers the old saying you pay peanuts you get monkeys does apply. This is why dealer stamps on a service book dont't sell me. Do it myself at least i know it has been done.

[@gerardwilton6165]

@@LowRangeNick I took mine off b4 getting turbo replaced because the first thing Isuzu dealer asked me when I rang up was does it have a catch can and I thought they may use having a catch can as an excuse not to fix it. First turbo replaced at 17000 klms now at 32000 klms and its making the whistling sound again.

[@louiskudlak2241]

R u going to fit a 2nd fuel filter??

[@LowRangeNick]

I may fit one in the future.

[@robertarmbruster5650]

Another great video thanks Nick. ABS elastomers would be OK for this application in the AFN bar. The Safari snorkel is made from Polyethylene, so very good for withstanding UV light. I've got a new 2021 model (Sept 2020) build DMax that has no issues at all, I love the thing.

[@1fatsussex]

Was the aftermarket engine management causing an issue or just removed to help with turbo replacements?

[@buddygoservice4621]

Hello NICK, I have sent some business inquiries to your email.

[@LowRangeNick]

Hi there, I have responded. Thank you 😊